Flash BIOS update (Linux update package) - IBM eServer BladeCenter HS20 (Type 8678) BRJT 1 36 Version 1.09 -[BRJT34A-1.09]- IBM BladeCenter HS20-[8678]- Linux BRJT34A Flash BIOS update (DOS update package) - IBM eServer BladeCenter HS20 (Type 8678) 1.0 31r2988l 31r2988l.sh . This update is packaged as a self-extracting shell script. This package must be run on a ext2 or ext3 filesystem. You must be logged in as root. All IBM 2 Worldwide 20041109000000.000000-240 -New LSI 1030 SCSI firmware and BIOS to fix known issues and WHQL certification. Upgrading to this BIOS will still keep your old settings but if you downlevel the BIOS to version 1.08 or below later then you would have to reconfigure your SCSI subsystem. -SCSI firmware uppgrade for following issue: The problem occurs only when volume sync is occurring and the secondary drive is replaced by another drive while the system is powered off. When system is powered back on, sync restarts at the same place that it left off with the old secondary drive that was removed. This results in a partially corrupted volume. So, if a volume was 50% complete with sync when the drive swap occurs, the first 50% of the volume will be corrupt. The corruption will not be seen until the volume becomes optimal. - clear machine check registers on D/C cycle as well. - Latest Intel errata patches CPUID 0xF29 affected. 1 31r2988l.sh -s not supported not supported