		File Name: 25R5131.txt
	IBM NetBAY LOcal Console Manager Code Update
		VERSION: 2.0.8
			6/17/04

	Contents:
	---------

	1.0 Supported Products
	2.0 Release Notes
	3.0 Resolved Issues
	4.0 Update Procedures
	5.0 Web Sites and Support Phone Number
	6.0 Trademarks and Notices
	7.0 Disclaimer



	1.0 Supported Products         

             1.1   Overview of Code
			
			This code is LcM Firmware version 2.0.8

			The Firmware for the LCM has been updated to resolve a sync issue
			that caused the OSCAR to flash on and off or to disappear when
			the unit was not attached to a target device.  

             1.2   Limitations

			None

             1.3   Enhancements
		
			Resolves LCM sync issue as related in 1.1.

             1.4   Level of Recommendations and Prerequisites for the
                   Update:

                   	IBM strongly recommends this update to customers
                    	running version 2.0.7 or lower.

                   
             1.5   Dependencies:
			PRODUCTS THAT SUPPORT THIS CODE:	
				1735L04
				32P1635

	   
		
	2.0	Release Notes

	   2.1	Version 2.0.0
		1.  	Initial release
		

	   2.2	Version 2.0.6

		1.	Production release with the UCO functionality on the LCM and RCM switches

	   2.3 	Version 2.0.7
		
		1.	Production release of LDAP functionality


	   2.4 	Version 2.0.8 
	
		1.	The Firmware for the LCM has been updated to resolve a sync issue
			that caused the OSCAR to flash on and off or to disappear when
			the unit was not attached to a target device.  
 	

	3.0 Known Issues:

	    3.1 APPLIANCE:
		
	    	1. 	COs and cascaded secondary switches occasionally lose 
			communication via the cascade protocol.  Typically due to 
			downlevel firmware on the secondary switch.
	    	2.	4th and 5th (mouse) buttons do not operate properly when 
			using UCO 1.1.2. The 4th and 5th mouse buttons do work, it 
			is just that they cannot be configured.  They can be used 
			for the default action that the USB mouse driver assigns 
			them (4th button is the same as hitting the back button in 
			MS Explorer; 5th button is the same as hitting the forward 
			button in MS Explorer).
	    	3.	LCM & RCM - Losing mouse & keyboard access when hotplug on
			local USB port.
		4.	Ballistic mouse when hotplug on local port.
	    	5.	Exiting OSCAR screen saver mode returns the user directly 
			to the OS vs. the Oscar main screen.
	    	6.	Help screens in LCM 2.0.6.3 refer to RCM instead of LCM.
	    	7.	Incorrect instructions in User Status disconnect screen for 
			LCM and RCM.
		8.	Ballistic mouse occurs after performing PS/2 reset in 
			Windows-NT Server & Workstation (SP3, SP4, SP5, SP6) with 
			Logitech mouse driver on both the Local as well as 
			the Digital. 
		9.	RedHat 8.0 Target connected via UCO displays keyboard errors 
			when the mouse is clicked.  Error message:  Keyboard. Can't 
			emulate rawmode for keycode 272.
		

	4.0 UPDATE PROCEDURE FOR CLIENT SOFTWARE:

	    4.1 Select the appropriate Wupdate file for your system to launch the firmware 
		upgrade.  


	5.0   WEB Sites and Support Phone Number
       	     
	    5.1  IBM Support Web Site:
                 http://www.pc.ibm.com/support

            5.2  IBM Marketing eserver Web Site:
                 http://www.ibm.com/eserver/xseries

            5.3  If you have any questions about this update, or problems
                 applying the update go to the following Help Center World
                 Telephone Numbers URL: 800-IBM-SERV (800-426-7378)
                 http://www.pc.ibm.com/qtechinfo/YAST-3P2QYL.html.
	     
            5.4  IntelliStation web site:
                 www.pc.ibm.com/intellistation   



       6.0   Trademarks and Notices
       
            6.1   The following terms are trademarks of the IBM Corporation
                  in the United States or other countries or both:
		  IBM, NetBAY

	    6.2   Windows is a trademark of Microsoft Corporation.
                  
	    6.3   Linux is a trademark of Linus Torvalds.

            6.4   Other company, product, and service names may be
                  trademarks or service marks of others.



	7.0   Disclaimer
       

            7.1   THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF
                  ANY KIND.   IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS
                  OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED
                  WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND
                  MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS
                  DOCUMENT.   BY FURNISHING THIS DOCUMENT, IBM GRANTS NO
                  LICENSES TO ANY PATENTS OR COPYRIGHTS.

            7.2   Note to Government Users
                  Include the following note after the disclaimer paragraph.

                  Note to U.S. Government Users -- Documentation related to
                  restricted rights -- Use, duplication or disclosure is
                  subject to restrictions set forth in GSA ADP Schedule
                  Contract with IBM Corporation.



