********************************************************************
* IBM Fibre Hard Disk Drive Update Program                         *
* Readme.txt     Version 1.01                                      *
********************************************************************

1.0   Overview
2.0   Change History
3.0   Installation and Setup Instructions
4.0   Configuration Information
5.0   Unattended Mode
6.0   Web Sites and Support Phone Number
7.0   Trademarks and Notices
8.0   Disclaimer

1.0  Overview
_____________

     1.1 Overview of this code

         The IBM Fibre Hard Disk Drive Update Program contains hard
         disk drive firmware updates. IBM PC Servers, Netfinity Severs,
         e(logo)server xSeries and IBM Intellistations with specific SCSI
         and Fibre hard disk drive options installed may be affected. The
         specific drive options are listed below:

         The Following IBM Hard Disk Drive options may contain drives that
         will be updated:

         94G7491, 94G7492, 02K0477, 02K0478, 02K0439, 94G7098, 94G7099,
         94G7429, 94G7430, 01K8053, 01K8055, 02K0440, 02K0441, 01K7956,
         01K7959, 01K8501, 02K0442, 01K8009, 01K8054, 01K8503, 39L9806,
         39L9807, 36L9808, 01K7960, 01K8499, 01K8500, 36L9809, 36L9810,
         36L9811, 36L9744, 36L9745, 36L9746, 36L9748, 36L9749, 36L9750,
         37L7199, 37L7200, 37L7201, 37L7202, 37L7203, 37L7204, 37L7205,
         37L7206, 37L6209, 37L6210, 37L6211, 19K0652, 19K0653, 19K0654,
         06P5707

         The Product ID's and the latest firmware contained in
         this release:

         Product ID    Code Release         Product ID    Code Release

         DMVSxxxx        01B0               ST39102L        B219
         DRHSxxxx        0272               ST118202        B219
         DGHSxxxx        04F0               ST34502L        B219
         DCHSxxxx        6464               ST39103L        B227
         DNESxxxx        SC30 or SAHR       ST318203        B227
         DDYSxxxx        S9HA               ST136403        B227
         DPSSxxxx        S9HA               ST39204L        3283
                                            ST318404        3283
         KATANAxx        08J8               ST336704        B232

         ST34571W        1033               ST39103F        B325
         ST34572W        1032               ST318203F       B325
         ST39173L        6689               ST136403F       B325
         ST39175L        0430               ST318304F       B335
         ST318275        0430               ST336704F       B335
         ST39236L        3281               ST173404F       B335
         ST318436        3281               ST318451F       B932

       1.2 Limitations

         The update program will find the options listed above and only updates
         the drive firmware. The update supports Hard Disk Drive options
         installed in IBM PC Servers, Netfinity Servers, e(logo)server xSeries
         or external storage enclosures controlled by any IBM Fibre Channel
         Raid Storage Subsystems or IBM Fast! Family of Storage Subsystems.


     1.3 Enhancements

         This release includes new microcode that updates
         drives with product ID strings beginning with DDYS and
         DPSS.  The new microcode includes logic changes to prevent
         conditons that may result in premature drive failures or
         in a possible error that could overwrite sectors of data.
         This error could result in incorrect or lost data and could
         go undetected by the system user.  While the conditions
         required to cause the situation are highly unlikely, we
         nonetheless highly recommend that you install the new
         microcode at your earliest convenience to avoid these
         potential error situations.



     1.4 Level of Recommendation

         IBM considers this update to be highly recommended for all
         customers with drives with product ID's DDYSxxx and
         DPSSxxxx in order to avoid this potential error.


     1.5 Dependencies

         Before running the IBM Fibre Hard Disk Drive Update Program,
         first update IBM Fibre Channel family of storage subsystems NVSRAM/Firmware
         to their latest levels. If the drives you are updating are being
         used in a Microsoft Cluster Server Environment please carefully read
         the CLUSTER.TXT file on diskette one.

___________________
2.0  Change History
___________________

     2.1  IBM Fibre Hard Disk Drive Update Program
          Version 1.00
          Initial Release

     2.2  IBM Fibre Hard Disk Drive Update Program
          Version 1.00 to Version 1.01
          Updated firmware for drives with product ID strings of
          DDYS and DPSS to S9HA


___________________________
3.0  Installation and Setup
___________________________

     3.1 Copying files from the CD to your system
         From the WinNT desktop:
          a. Copy the file 'SM7fieldtool-97022500.exe' from the CD to a
             temporary folder or to the default folder on a local drive .
          b. Click the 'Start' button on the taskbar;
          c. Click the 'Run' button.
          d. Click 'Browse' to look for this saved file in the temporary 
		 folder or default folder on the local drive and click 'Open'.
          e. Click 'OK' from the Run window. This file will extract other
             files into the same directory.


     3.2 Installing the Netfinity Fibre Channel Storage Manager 7 Field Tool
          a. Click the 'Start' button on the taskbar;
          b. Click the 'Run' button.
          c. Browse the temp folder or default folder for the 'Setup.exe' 
		 file and click 'Open'.
          d. Run this program and the IBM Netfinity Fibre Channel Storage
             Manager 7 Field Tool will be installed.  When asked for a
             directory to install the program, select the default or choose
             one of your own.
          e. Once the install is complete, and the question to re-boot the
             system 'now' is asked, click 'No' and then 'Finish'.

     3.3 Starting the Netfinity Fibre Channel Storage Manager 7 Field Tool
          a. Click the 'Start' button on the taskbar;
          b. Click the 'Programs' button.
          c. Click the 'Netfinity Fibre Channel Storage Manager 7 Field Tool'
          d. A window will appear labeled 'Netfinity Storage Manager 7
             Field Tool (Enterprise Management)'.  This will be refered to
             as the main window.

     3.4 Enabling download function of the storage subsystems 
          a. From the main window, highlight one of the storage subsystems displayed.
          b. From the toolbar click 'Tools'; click 'Execute Script';
             The 'Script Editor' window will open.
          c. From the 'Script Editor' toolbar, click 'File'; click 'Load Script'
          d. Locate the file 'EnablDriveFWDownload.scr' on the IBM Fibre
             Hard Disk Drive Update Program CD, select and click 'Open'
          d. From the 'Script Editor' toolbar click 'Tools';
             click 'Execute Only'. This runs the script. After the script
             has completed, errors will be reported if there is only one
             active controller. This is expected.
          e. Close the 'Script Editor' window, thus returning to the main
             window.

     3.5 Downloading Hard Disk Drive Firmware
          a. Double click a storage subsystem which has Hard Disk Drives to
             be updated.  This will open the 'Netfinity Storage Manager 7
             Field Tool (Subsystem Management)' window.
          b. From the tool bar, click 'Diagnostics'; click 'Download';
             click 'Drive Firmware'. The 'Download Drive Firmware' window
             will open, displaying a list of drives attached to the
             storage subsystem.

                Note: Each drive has an associated Product ID. Only drives with
                      the same Product ID can be updated at the same time.

          c. Select drive(s), with the same Product ID, to be updated by
             highlighting them.  To locate the code to be downloaded to the
             selected drives click 'Browse'; then locate the file
             on the IBM Fibre Hard Disk Drive Update Program CD with the
             same name as the drive's Product ID. Click on the file; click
             'Open'. You will be returned to the 'Download Drive Firmware'
             window.
          d. Click 'Start' button; A 'Confirm Download' window will pop-up to
             confirm the choice of downloading.  Click 'Yes'.  The download
             process will begin.  Status of the download will be indicated
             in the 'Status' column of the 'Download Drive Firmware' window.
             Status column will report complete when the download is finished.
          e. Repeat steps 3.5.c and 3.5.d for each additional drive(s) with
             a different Product ID on the currently selected storage subsystem.
          f. When all drives on the current storage subsystem have been updated,
             close the 'Download Drive Firmware' window.
          g. Repeat step 3.5.a thru 3.5.e for each additional storage subsystem
             that has drives attached.

     3.6  Exiting the IBM Fibre Drive Update Program
          a. When all drives on all storage subsystems have been updated, close
             the 'Netfinity Storage Manager 7 Field Tool (Subsystem
             Management)' window.
          b. Close the 'Netfinity Fibre Channel Storage Manager 7 Field Tool
             (Enterprise Management)' window.

______________________________
4.0  Configuration Information
______________________________

     4.1  There is no configuration required with the IBM Fibre Hard Disk
          Drive Update Program.

____________________
5.0  Unattended Mode
_____________________


     5.1  The IBM Fibre Hard Disk Drive Update Program requires user
          input and does not support unattended mode at this time.

_______________________________________
6.0  WEB Sites and Support Phone Number
_______________________________________

     6.1   IBM Support Web Site:
           http://www.pc.ibm.com/support

     6.2   IBM Marketing Netfinity Web Site:
           http://www.pc.ibm.com/netfinity

     6.3   IBM Marketing Intellistaion Web Site:
           http://www.pc.ibm.com/intellistation

     6.4   If you have any questions about this update, or problems
           applying the update go to the following Help Center World
           Telephone Numbers URL:
           http://www.pc.ibm.com/qtechinfo/YAST-3P2QLY.html.

__________________________
7.0 Trademarks and Notices
__________________________

     7.1  The following terms are trademarks of the IBM Corporation
          in the United States or other countries or both:

          IBM    HelpCenter    Netfinity    Server    Intellistation
          e(logo)server xSeries

________________
8.0   Disclaimer
________________

     8.1   THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF
           ANY KIND.   IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS
           OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED
           WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND
           MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS
           DOCUMENT.   BY FURNISHING THIS DOCUMENT, IBM GRANTS NO
           LICENSES TO ANY PATENTS OR COPYRIGHTS.


     8.2   Note to Government Users
           Include the following note after the disclaimer paragraph.

           Note to U.S. Government Users -- Documentation related to
           restricted rights -- Use, duplication or disclosure is
           subject to restrictions set forth in GSA ADP Schedule
           Contract with IBM Corporation.

