IBM eserver xSeries 240 and IBM Netfinity 5600 Diagnostics Flash Update TNY1 1 58 Version 3.02 -[TNY163A-3.02]- IBM eserver xSeries 240 and IBM Netfinity 5600-[8664]- Windows NT 4.0 SP6 Windows 2000 TNY163A IBM eserver xSeries 240 and IBM Netfinity 5600 Diagnostics Flash Update 1.0 24P2846 24P2846U.EXE . This update is packaged as a self-extracting Package for the web (PFW). To unpack, this update requires that your TEMP environment variable be set to a path with read/write access. You must be logged in as an administrator. All IBM 2 Worldwide 20001127000000.000000-240 V3.02 - removed keyboard test under systemboard since POST performs the same tests - enabled multi-processor support in the CPU/coprocessor test and removed the AP test - fixed a bug where running the RAID diagnostic with a ServeRAID 4-L or ServeRAID 4-M would cause subsequent fixed disk linear verify and LED diagnostics to fail V3.01 - Pick up changes to the Flash Update Utility V3.00 - Fixed a bug where blank screens were displayed during interactive video tests - Updated USB interface test for south bridge revision - Added support for ServeRAID IVL and ServeRAID IVM V2.03 - Pick up setup replication changes to the Flash Update Utility V2.02 - Removed the Video Memory test V2.01 - Fixed a bug where running "Normal Tests" or "Quick Tests" remotely would cause the remote connection to be dropped - Removed the RTC test V2.00 - Fixed a bug whereby testing adapters in Active (TM) PCI slots could hang when run after the Active PCI Latch test or the Active PCI Connectors LED test - Added support for ServeRAID IV - Added support for performing physical drive testing on RAID adapters - Added a RAID Physical test - Butterfly Seek V1.01 - Fixed a bug where the USB Interface Test could hang or cause a system reboot V1.00 - Initial Release 2 24P2846U.EXE -a -s NOT SUPPORTED NOT SUPPORTED