diff -crN ./gnome-mime-data/Makefile.in /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./gnome-mime-data/Makefile.in *** ./gnome-mime-data/Makefile.in Tue Feb 4 10:07:07 2003 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./gnome-mime-data/Makefile.in Sat Aug 9 21:17:42 2003 *************** *** 1,6 **** ! # Makefile.in generated automatically by automake 1.4-p6 from Makefile.am ! # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. --- 1,7 ---- ! # Makefile.in generated automatically by automake 1.5 from Makefile.am. ! # Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 ! # Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. *************** *** 10,15 **** --- 11,17 ---- # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. + @SET_MAKE@ SHELL = @SHELL@ *************** *** 31,43 **** mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include - - DESTDIR = - pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ - top_builddir = . ACLOCAL = @ACLOCAL@ --- 33,41 ---- *************** *** 46,69 **** AUTOHEADER = @AUTOHEADER@ INSTALL = @INSTALL@ ! INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ transform = @program_transform_name@ - NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ DATADIRNAME = @DATADIRNAME@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ --- 44,72 ---- AUTOHEADER = @AUTOHEADER@ INSTALL = @INSTALL@ ! INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ + INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : + AMTAR = @AMTAR@ + AWK = @AWK@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ DATADIRNAME = @DATADIRNAME@ + DEPDIR = @DEPDIR@ + EXEEXT = @EXEEXT@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ *************** *** 85,92 **** INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ MKINSTALLDIRS = @MKINSTALLDIRS@ PACKAGE = @PACKAGE@ POFILES = @POFILES@ POSUB = @POSUB@ --- 88,95 ---- INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ MAINT = @MAINT@ MKINSTALLDIRS = @MKINSTALLDIRS@ + OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ POFILES = @POFILES@ POSUB = @POSUB@ *************** *** 94,99 **** --- 97,105 ---- PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ + am__include = @am__include@ + am__quote = @am__quote@ + install_sh = @install_sh@ SUBDIRS = icons man po *************** *** 113,260 **** sysconf_DATA = gnome-vfs-mime-magic ! EXTRA_DIST = autogen.sh check-mime.pl gnome-mime-data.spec gnome-mime-data-2.0.pc.in intltool-extract.in intltool-merge.in intltool-update.in $(keys_in_files) $(mime_DATA) $(sysconf_DATA) $(applications_DATA) ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = config.h ! CONFIG_CLEAN_FILES = gnome-mime-data.spec gnome-mime-data-2.0.pc ! DATA = $(applications_DATA) $(mime_DATA) $(pkgconfig_DATA) \ ! $(sysconf_DATA) ! ! DIST_COMMON = README ./stamp-h.in AUTHORS COPYING ChangeLog INSTALL \ ! Makefile.am Makefile.in NEWS acconfig.h aclocal.m4 config.h.in \ ! configure configure.in gnome-mime-data-2.0.pc.in \ ! gnome-mime-data.spec.in install-sh missing mkinstalldirs ! ! ! DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) - TAR = gtar - GZIP_ENV = --best - all: all-redirect .SUFFIXES: ! $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) ! cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps Makefile ! ! Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status ! cd $(top_builddir) \ ! && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status ! $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in ! cd $(srcdir) && $(ACLOCAL) ! ! config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck ! $(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) cd $(srcdir) && $(AUTOCONF) config.h: stamp-h @if test ! -f $@; then \ rm -f stamp-h; \ $(MAKE) stamp-h; \ else :; fi stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES= CONFIG_HEADERS=config.h \ $(SHELL) ./config.status ! @echo timestamp > stamp-h 2> /dev/null ! $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@$(srcdir)/stamp-h.in @if test ! -f $@; then \ ! rm -f $(srcdir)/stamp-h.in; \ ! $(MAKE) $(srcdir)/stamp-h.in; \ else :; fi ! $(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h cd $(top_srcdir) && $(AUTOHEADER) ! @echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null ! ! mostlyclean-hdr: ! ! clean-hdr: distclean-hdr: -rm -f config.h - - maintainer-clean-hdr: gnome-mime-data.spec: $(top_builddir)/config.status gnome-mime-data.spec.in ! cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status gnome-mime-data-2.0.pc: $(top_builddir)/config.status gnome-mime-data-2.0.pc.in ! cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status ! install-applicationsDATA: $(applications_DATA) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(applicationsdir) @list='$(applications_DATA)'; for p in $$list; do \ ! if test -f $(srcdir)/$$p; then \ ! echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(applicationsdir)/$$p"; \ ! $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(applicationsdir)/$$p; \ ! else if test -f $$p; then \ ! echo " $(INSTALL_DATA) $$p $(DESTDIR)$(applicationsdir)/$$p"; \ ! $(INSTALL_DATA) $$p $(DESTDIR)$(applicationsdir)/$$p; \ ! fi; fi; \ done uninstall-applicationsDATA: @$(NORMAL_UNINSTALL) ! list='$(applications_DATA)'; for p in $$list; do \ ! rm -f $(DESTDIR)$(applicationsdir)/$$p; \ done - install-mimeDATA: $(mime_DATA) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(mimedir) @list='$(mime_DATA)'; for p in $$list; do \ ! if test -f $(srcdir)/$$p; then \ ! echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(mimedir)/$$p"; \ ! $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(mimedir)/$$p; \ ! else if test -f $$p; then \ ! echo " $(INSTALL_DATA) $$p $(DESTDIR)$(mimedir)/$$p"; \ ! $(INSTALL_DATA) $$p $(DESTDIR)$(mimedir)/$$p; \ ! fi; fi; \ done uninstall-mimeDATA: @$(NORMAL_UNINSTALL) ! list='$(mime_DATA)'; for p in $$list; do \ ! rm -f $(DESTDIR)$(mimedir)/$$p; \ done - install-pkgconfigDATA: $(pkgconfig_DATA) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(pkgconfigdir) @list='$(pkgconfig_DATA)'; for p in $$list; do \ ! if test -f $(srcdir)/$$p; then \ ! echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkgconfigdir)/$$p"; \ ! $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkgconfigdir)/$$p; \ ! else if test -f $$p; then \ ! echo " $(INSTALL_DATA) $$p $(DESTDIR)$(pkgconfigdir)/$$p"; \ ! $(INSTALL_DATA) $$p $(DESTDIR)$(pkgconfigdir)/$$p; \ ! fi; fi; \ done uninstall-pkgconfigDATA: @$(NORMAL_UNINSTALL) ! list='$(pkgconfig_DATA)'; for p in $$list; do \ ! rm -f $(DESTDIR)$(pkgconfigdir)/$$p; \ done - install-sysconfDATA: $(sysconf_DATA) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(sysconfdir) @list='$(sysconf_DATA)'; for p in $$list; do \ ! if test -f $(srcdir)/$$p; then \ ! echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(sysconfdir)/$$p"; \ ! $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(sysconfdir)/$$p; \ ! else if test -f $$p; then \ ! echo " $(INSTALL_DATA) $$p $(DESTDIR)$(sysconfdir)/$$p"; \ ! $(INSTALL_DATA) $$p $(DESTDIR)$(sysconfdir)/$$p; \ ! fi; fi; \ done uninstall-sysconfDATA: @$(NORMAL_UNINSTALL) ! list='$(sysconf_DATA)'; for p in $$list; do \ ! rm -f $(DESTDIR)$(sysconfdir)/$$p; \ done # This directory's subdirectories are mostly independent; you can cd --- 119,271 ---- sysconf_DATA = gnome-vfs-mime-magic ! EXTRA_DIST = \ ! autogen.sh \ ! check-mime.pl \ ! gnome-mime-data.spec \ ! gnome-mime-data-2.0.pc.in \ ! intltool-extract.in \ ! intltool-merge.in \ ! intltool-update.in \ ! $(keys_in_files) $(mime_DATA) $(sysconf_DATA) $(applications_DATA) + subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = config.h ! CONFIG_CLEAN_FILES = gnome-mime-data.spec gnome-mime-data-2.0.pc ! depcomp = ! DIST_SOURCES = ! DATA = $(applications_DATA) $(mime_DATA) $(pkgconfig_DATA) \ ! $(sysconf_DATA) ! ! ! RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \ ! uninstall-info-recursive all-recursive install-data-recursive \ ! install-exec-recursive installdirs-recursive install-recursive \ ! uninstall-recursive check-recursive installcheck-recursive ! DIST_COMMON = README ./stamp-h.in AUTHORS COPYING ChangeLog INSTALL \ ! Makefile.am Makefile.in NEWS acconfig.h aclocal.m4 config.guess \ ! config.h.in config.sub configure configure.in \ ! gnome-mime-data-2.0.pc.in gnome-mime-data.spec.in install-sh \ ! ltmain.sh missing mkinstalldirs ! DIST_SUBDIRS = $(SUBDIRS) ! all: config.h ! $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: ! $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) ! cd $(top_srcdir) && \ ! $(AUTOMAKE) --gnu --ignore-deps Makefile ! Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status ! cd $(top_builddir) && \ ! CONFIG_HEADERS= CONFIG_LINKS= \ ! CONFIG_FILES=$@ $(SHELL) ./config.status ! $(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck ! $(srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) cd $(srcdir) && $(AUTOCONF) + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) config.h: stamp-h @if test ! -f $@; then \ rm -f stamp-h; \ $(MAKE) stamp-h; \ else :; fi stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status + @rm -f stamp-h stamp-hT + @echo timestamp > stamp-hT 2> /dev/null cd $(top_builddir) \ && CONFIG_FILES= CONFIG_HEADERS=config.h \ $(SHELL) ./config.status ! @mv stamp-hT stamp-h ! $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/./stamp-h.in @if test ! -f $@; then \ ! rm -f $(srcdir)/./stamp-h.in; \ ! $(MAKE) $(srcdir)/./stamp-h.in; \ else :; fi ! $(srcdir)/./stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/acconfig.h ! @rm -f $(srcdir)/./stamp-h.in $(srcdir)/./stamp-h.inT ! @echo timestamp > $(srcdir)/./stamp-h.inT 2> /dev/null cd $(top_srcdir) && $(AUTOHEADER) ! @mv $(srcdir)/./stamp-h.inT $(srcdir)/./stamp-h.in distclean-hdr: -rm -f config.h gnome-mime-data.spec: $(top_builddir)/config.status gnome-mime-data.spec.in ! cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= CONFIG_LINKS= $(SHELL) ./config.status gnome-mime-data-2.0.pc: $(top_builddir)/config.status gnome-mime-data-2.0.pc.in ! cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= CONFIG_LINKS= $(SHELL) ./config.status ! uninstall-info-am: install-applicationsDATA: $(applications_DATA) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(applicationsdir) @list='$(applications_DATA)'; for p in $$list; do \ ! if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ ! f="`echo $$p | sed -e 's|^.*/||'`"; \ ! echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(applicationsdir)/$$f"; \ ! $(INSTALL_DATA) $$d$$p $(DESTDIR)$(applicationsdir)/$$f; \ done uninstall-applicationsDATA: @$(NORMAL_UNINSTALL) ! @list='$(applications_DATA)'; for p in $$list; do \ ! f="`echo $$p | sed -e 's|^.*/||'`"; \ ! echo " rm -f $(DESTDIR)$(applicationsdir)/$$f"; \ ! rm -f $(DESTDIR)$(applicationsdir)/$$f; \ done install-mimeDATA: $(mime_DATA) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(mimedir) @list='$(mime_DATA)'; for p in $$list; do \ ! if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ ! f="`echo $$p | sed -e 's|^.*/||'`"; \ ! echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(mimedir)/$$f"; \ ! $(INSTALL_DATA) $$d$$p $(DESTDIR)$(mimedir)/$$f; \ done uninstall-mimeDATA: @$(NORMAL_UNINSTALL) ! @list='$(mime_DATA)'; for p in $$list; do \ ! f="`echo $$p | sed -e 's|^.*/||'`"; \ ! echo " rm -f $(DESTDIR)$(mimedir)/$$f"; \ ! rm -f $(DESTDIR)$(mimedir)/$$f; \ done install-pkgconfigDATA: $(pkgconfig_DATA) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(pkgconfigdir) @list='$(pkgconfig_DATA)'; for p in $$list; do \ ! if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ ! f="`echo $$p | sed -e 's|^.*/||'`"; \ ! echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(pkgconfigdir)/$$f"; \ ! $(INSTALL_DATA) $$d$$p $(DESTDIR)$(pkgconfigdir)/$$f; \ done uninstall-pkgconfigDATA: @$(NORMAL_UNINSTALL) ! @list='$(pkgconfig_DATA)'; for p in $$list; do \ ! f="`echo $$p | sed -e 's|^.*/||'`"; \ ! echo " rm -f $(DESTDIR)$(pkgconfigdir)/$$f"; \ ! rm -f $(DESTDIR)$(pkgconfigdir)/$$f; \ done install-sysconfDATA: $(sysconf_DATA) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(sysconfdir) @list='$(sysconf_DATA)'; for p in $$list; do \ ! if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ ! f="`echo $$p | sed -e 's|^.*/||'`"; \ ! echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(sysconfdir)/$$f"; \ ! $(INSTALL_DATA) $$d$$p $(DESTDIR)$(sysconfdir)/$$f; \ done uninstall-sysconfDATA: @$(NORMAL_UNINSTALL) ! @list='$(sysconf_DATA)'; for p in $$list; do \ ! f="`echo $$p | sed -e 's|^.*/||'`"; \ ! echo " rm -f $(DESTDIR)$(sysconfdir)/$$f"; \ ! rm -f $(DESTDIR)$(sysconfdir)/$$f; \ done # This directory's subdirectories are mostly independent; you can cd *************** *** 263,274 **** # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. ! ! @SET_MAKE@ ! ! all-recursive install-data-recursive install-exec-recursive \ ! installdirs-recursive install-recursive uninstall-recursive \ ! check-recursive installcheck-recursive info-recursive dvi-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ --- 274,280 ---- # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. ! $(RECURSIVE_TARGETS): @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ *************** *** 291,301 **** maintainer-clean-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ ! rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ ! rev="$$subdir $$rev"; \ ! test "$$subdir" != "." || dot_seen=yes; \ done; \ ! test "$$dot_seen" = "no" && rev=". $$rev"; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ --- 297,312 ---- maintainer-clean-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ ! case "$@" in \ ! distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ ! *) list='$(SUBDIRS)' ;; \ ! esac; \ ! rev=''; for subdir in $$list; do \ ! if test "$$subdir" = "."; then :; else \ ! rev="$$subdir $$rev"; \ ! fi; \ done; \ ! rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ *************** *** 314,397 **** tags: TAGS ! ID: $(HEADERS) $(SOURCES) $(LISP) ! list='$(SOURCES) $(HEADERS)'; \ ! unique=`for i in $$list; do echo $$i; done | \ ! awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ ! here=`pwd` && cd $(srcdir) \ ! && mkid -f$$here/ID $$unique $(LISP) ! TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ ! if test "$$subdir" = .; then :; else \ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ ! fi; \ done; \ ! list='$(SOURCES) $(HEADERS)'; \ ! unique=`for i in $$list; do echo $$i; done | \ ! awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \ ! || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS) ! ! mostlyclean-tags: ! clean-tags: distclean-tags: ! -rm -f TAGS ID ! maintainer-clean-tags: distdir = $(PACKAGE)-$(VERSION) - top_distdir = $(distdir) ! # This target untars the dist file and tries a VPATH configuration. Then ! # it guarantees that the distribution is self-contained by making another ! # tarfile. ! distcheck: dist ! -rm -rf $(distdir) ! GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz ! mkdir $(distdir)/=build ! mkdir $(distdir)/=inst ! dc_install_base=`cd $(distdir)/=inst && pwd`; \ ! cd $(distdir)/=build \ ! && ../configure --srcdir=.. --prefix=$$dc_install_base \ ! && $(MAKE) $(AM_MAKEFLAGS) \ ! && $(MAKE) $(AM_MAKEFLAGS) dvi \ ! && $(MAKE) $(AM_MAKEFLAGS) check \ ! && $(MAKE) $(AM_MAKEFLAGS) install \ ! && $(MAKE) $(AM_MAKEFLAGS) installcheck \ ! && $(MAKE) $(AM_MAKEFLAGS) dist ! -rm -rf $(distdir) ! @banner="$(distdir).tar.gz is ready for distribution"; \ ! dashes=`echo "$$banner" | sed s/./=/g`; \ ! echo "$$dashes"; \ ! echo "$$banner"; \ ! echo "$$dashes" ! dist: distdir ! -chmod -R a+r $(distdir) ! GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) ! -rm -rf $(distdir) ! dist-all: distdir ! -chmod -R a+r $(distdir) ! GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) ! -rm -rf $(distdir) distdir: $(DISTFILES) ! -rm -rf $(distdir) mkdir $(distdir) ! -chmod 777 $(distdir) @for file in $(DISTFILES); do \ ! d=$(srcdir); \ if test -d $$d/$$file; then \ ! cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ ! || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ ! || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done for subdir in $(SUBDIRS); do \ --- 325,390 ---- tags: TAGS ! ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) ! list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \ ! unique=`for i in $$list; do \ ! if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ! done | \ ! $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ ! mkid -fID $$unique $(LISP) ! TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ ! $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ ! if test "$$subdir" = .; then :; else \ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ ! fi; \ done; \ ! list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \ ! unique=`for i in $$list; do \ ! if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ! done | \ ! $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \ ! || etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) ! GTAGS: ! here=`CDPATH=: && cd $(top_builddir) && pwd` \ ! && cd $(top_srcdir) \ ! && gtags -i $(GTAGS_ARGS) $$here distclean-tags: ! -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH ! DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + top_distdir = . + # Avoid unsightly `./'. distdir = $(PACKAGE)-$(VERSION) ! GZIP_ENV = --best ! distdir: $(DISTFILES) ! -chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir) mkdir $(distdir) ! $(mkinstalldirs) $(distdir)/. $(distdir)/man $(distdir)/po @for file in $(DISTFILES); do \ ! if test -f $$file; then d=.; else d=$(srcdir); fi; \ ! dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ! if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ! $(mkinstalldirs) "$(distdir)/$$dir"; \ ! fi; \ if test -d $$d/$$file; then \ ! cp -pR $$d/$$file $(distdir) \ ! || exit 1; \ else \ test -f $(distdir)/$$file \ ! || cp -p $$d/$$file $(distdir)/$$file \ ! || exit 1; \ fi; \ done for subdir in $(SUBDIRS); do \ *************** *** 399,491 **** test -d $(distdir)/$$subdir \ || mkdir $(distdir)/$$subdir \ || exit 1; \ ! chmod 777 $(distdir)/$$subdir; \ ! (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \ || exit 1; \ fi; \ done ! info-am: ! info: info-recursive ! dvi-am: ! dvi: dvi-recursive check-am: all-am check: check-recursive ! installcheck-am: ! installcheck: installcheck-recursive ! all-recursive-am: config.h ! $(MAKE) $(AM_MAKEFLAGS) all-recursive ! install-exec-am: install-sysconfDATA install-exec: install-exec-recursive - - install-data-am: install-applicationsDATA install-mimeDATA \ - install-pkgconfigDATA install-data: install-data-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - install: install-recursive - uninstall-am: uninstall-applicationsDATA uninstall-mimeDATA \ - uninstall-pkgconfigDATA uninstall-sysconfDATA - uninstall: uninstall-recursive - all-am: Makefile $(DATA) config.h - all-redirect: all-recursive-am - install-strip: - $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install - installdirs: installdirs-recursive - installdirs-am: - $(mkinstalldirs) $(DESTDIR)$(applicationsdir) $(DESTDIR)$(mimedir) \ - $(DESTDIR)$(pkgconfigdir) $(DESTDIR)$(sysconfdir) - mostlyclean-generic: clean-generic: distclean-generic: ! -rm -f Makefile $(CONFIG_CLEAN_FILES) ! -rm -f config.cache config.log stamp-h stamp-h[0-9]* maintainer-clean-generic: ! mostlyclean-am: mostlyclean-hdr mostlyclean-tags mostlyclean-generic ! mostlyclean: mostlyclean-recursive ! clean-am: clean-hdr clean-tags clean-generic mostlyclean-am ! clean: clean-recursive ! distclean-am: distclean-hdr distclean-tags distclean-generic clean-am ! distclean: distclean-recursive ! -rm -f config.status ! maintainer-clean-am: maintainer-clean-hdr maintainer-clean-tags \ ! maintainer-clean-generic distclean-am ! @echo "This command is intended for maintainers to use;" ! @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-recursive - -rm -f config.status ! .PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \ ! uninstall-applicationsDATA install-applicationsDATA uninstall-mimeDATA \ ! install-mimeDATA uninstall-pkgconfigDATA install-pkgconfigDATA \ ! uninstall-sysconfDATA install-sysconfDATA install-data-recursive \ ! uninstall-data-recursive install-exec-recursive \ ! uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \ ! all-recursive check-recursive installcheck-recursive info-recursive \ ! dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \ ! maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ ! distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ ! dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \ ! install-exec-am install-exec install-data-am install-data install-am \ ! install uninstall-am uninstall all-redirect all-am all installdirs-am \ ! installdirs mostlyclean-generic distclean-generic clean-generic \ ! maintainer-clean-generic clean mostlyclean distclean maintainer-clean ! @INTLTOOL_KEYS_RULE@ # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: --- 392,539 ---- test -d $(distdir)/$$subdir \ || mkdir $(distdir)/$$subdir \ || exit 1; \ ! (cd $$subdir && \ ! $(MAKE) $(AM_MAKEFLAGS) \ ! top_distdir="$(top_distdir)" \ ! distdir=../$(distdir)/$$subdir \ ! distdir) \ || exit 1; \ fi; \ done ! -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ ! ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ ! || chmod -R a+r $(distdir) ! dist: distdir ! $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz ! -chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir) ! ! # This target untars the dist file and tries a VPATH configuration. Then ! # it guarantees that the distribution is self-contained by making another ! # tarfile. ! distcheck: dist ! -chmod -R a+w $(distdir) > /dev/null 2>&1; rm -rf $(distdir) ! GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ! chmod -R a-w $(distdir); chmod a+w $(distdir) ! mkdir $(distdir)/=build ! mkdir $(distdir)/=inst ! chmod a-w $(distdir) ! dc_install_base=`CDPATH=: && cd $(distdir)/=inst && pwd` \ ! && cd $(distdir)/=build \ ! && ../configure --srcdir=.. --prefix=$$dc_install_base \ ! && $(MAKE) $(AM_MAKEFLAGS) \ ! && $(MAKE) $(AM_MAKEFLAGS) dvi \ ! && $(MAKE) $(AM_MAKEFLAGS) check \ ! && $(MAKE) $(AM_MAKEFLAGS) install \ ! && $(MAKE) $(AM_MAKEFLAGS) installcheck \ ! && $(MAKE) $(AM_MAKEFLAGS) uninstall \ ! && (test `find $$dc_install_base -type f -print | wc -l` -le 1 \ ! || (echo "Error: files left after uninstall" 1>&2; \ ! exit 1) ) \ ! && $(MAKE) $(AM_MAKEFLAGS) dist \ ! && $(MAKE) $(AM_MAKEFLAGS) distclean \ ! && rm -f $(distdir).tar.gz \ ! && (test `find . -type f -print | wc -l` -eq 0 \ ! || (echo "Error: files left after distclean" 1>&2; \ ! exit 1) ) ! -chmod -R a+w $(distdir) > /dev/null 2>&1; rm -rf $(distdir) ! @echo "$(distdir).tar.gz is ready for distribution" | \ ! sed 'h;s/./=/g;p;x;p;x' check-am: all-am check: check-recursive ! all-am: Makefile $(DATA) config.h ! installdirs: installdirs-recursive ! installdirs-am: ! $(mkinstalldirs) $(DESTDIR)$(applicationsdir) $(DESTDIR)$(mimedir) $(DESTDIR)$(pkgconfigdir) $(DESTDIR)$(sysconfdir) ! install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive + uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + installcheck: installcheck-recursive + install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: ! -rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]* maintainer-clean-generic: ! @echo "This command is intended for maintainers to use" ! @echo "it deletes files that may require special tools to rebuild." ! clean: clean-recursive ! clean-am: clean-generic mostlyclean-am ! dist-all: distdir ! $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz ! -chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir) ! distclean: distclean-recursive ! -rm -f config.status config.cache config.log ! distclean-am: clean-am distclean-generic distclean-hdr distclean-tags ! dvi: dvi-recursive ! dvi-am: ! info: info-recursive ! info-am: ! ! install-data-am: install-applicationsDATA install-mimeDATA \ ! install-pkgconfigDATA ! ! install-exec-am: install-sysconfDATA ! ! install-info: install-info-recursive ! ! install-man: ! ! installcheck-am: maintainer-clean: maintainer-clean-recursive ! maintainer-clean-am: distclean-am maintainer-clean-generic ! mostlyclean: mostlyclean-recursive + mostlyclean-am: mostlyclean-generic + + uninstall-am: uninstall-applicationsDATA uninstall-info-am \ + uninstall-mimeDATA uninstall-pkgconfigDATA \ + uninstall-sysconfDATA + + uninstall-info: uninstall-info-recursive + + .PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \ + clean-generic clean-recursive dist dist-all distcheck distclean \ + distclean-generic distclean-hdr distclean-recursive \ + distclean-tags distdir dvi dvi-am dvi-recursive info info-am \ + info-recursive install install-am install-applicationsDATA \ + install-data install-data-am install-data-recursive \ + install-exec install-exec-am install-exec-recursive \ + install-info install-info-am install-info-recursive install-man \ + install-mimeDATA install-pkgconfigDATA install-recursive \ + install-strip install-sysconfDATA installcheck installcheck-am \ + installdirs installdirs-am installdirs-recursive \ + maintainer-clean maintainer-clean-generic \ + maintainer-clean-recursive mostlyclean mostlyclean-generic \ + mostlyclean-recursive tags tags-recursive uninstall \ + uninstall-am uninstall-applicationsDATA uninstall-info-am \ + uninstall-info-recursive uninstall-mimeDATA \ + uninstall-pkgconfigDATA uninstall-recursive \ + uninstall-sysconfDATA + + @INTLTOOL_KEYS_RULE@ # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diff -crN ./gnome-mime-data/aclocal.m4 /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./gnome-mime-data/aclocal.m4 *** ./gnome-mime-data/aclocal.m4 Tue Feb 4 10:06:09 2003 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./gnome-mime-data/aclocal.m4 Sat Aug 9 21:17:29 2003 *************** *** 1,123 **** ! dnl aclocal.m4 generated automatically by aclocal 1.4-p6 ! dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. ! dnl This file is free software; the Free Software Foundation ! dnl gives unlimited permission to copy and/or distribute it, ! dnl with or without modifications, as long as this notice is preserved. ! ! dnl This program is distributed in the hope that it will be useful, ! dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without ! dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A ! dnl PARTICULAR PURPOSE. # Like AC_CONFIG_HEADER, but automatically create stamp file. AC_DEFUN([AM_CONFIG_HEADER], ! [AC_PREREQ([2.12]) ! AC_CONFIG_HEADER([$1]) ! dnl When config.status generates a header, we must update the stamp-h file. ! dnl This file resides in the same directory as the config header ! dnl that is generated. We must strip everything past the first ":", ! dnl and everything past the last "/". ! AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl ! ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>, ! <>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>, ! <>; do ! case " <<$>>CONFIG_HEADERS " in ! *" <<$>>am_file "*<<)>> ! echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx ;; esac ! am_indx=`expr "<<$>>am_indx" + 1` ! done<<>>dnl>>) ! changequote([,]))]) # Do all the work for Automake. This macro actually does too much -- # some checks are only needed if your package does certain things. # But this isn't really a big deal. ! # serial 1 - dnl Usage: - dnl AM_INIT_AUTOMAKE(package,version, [no-define]) AC_DEFUN([AM_INIT_AUTOMAKE], ! [AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl ! AC_REQUIRE([AC_PROG_INSTALL]) ! PACKAGE=[$1] ! AC_SUBST(PACKAGE) ! VERSION=[$2] ! AC_SUBST(VERSION) ! dnl test to see if srcdir already configured ! if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then ! AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi - ifelse([$3],, - AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) - AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])) - AC_REQUIRE([AM_SANITY_CHECK]) - AC_REQUIRE([AC_ARG_PROGRAM]) - dnl FIXME This is truly gross. - missing_dir=`cd $ac_aux_dir && pwd` - AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}, $missing_dir) - AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) - AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}, $missing_dir) - AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) - AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) - AC_REQUIRE([AC_PROG_MAKE_SET])]) - - # Copyright 2002 Free Software Foundation, Inc. - - # This program is free software; you can redistribute it and/or modify - # it under the terms of the GNU General Public License as published by - # the Free Software Foundation; either version 2, or (at your option) - # any later version. ! # This program is distributed in the hope that it will be useful, ! # but WITHOUT ANY WARRANTY; without even the implied warranty of ! # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ! # GNU General Public License for more details. ! ! # You should have received a copy of the GNU General Public License ! # along with this program; if not, write to the Free Software ! # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA ! ! # AM_AUTOMAKE_VERSION(VERSION) ! # ---------------------------- ! # Automake X.Y traces this macro to ensure aclocal.m4 has been ! # generated from the m4 files accompanying Automake X.Y. ! AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.4"]) ! # AM_SET_CURRENT_AUTOMAKE_VERSION ! # ------------------------------- ! # Call AM_AUTOMAKE_VERSION so it can be traced. ! # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. ! AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], ! [AM_AUTOMAKE_VERSION([1.4-p6])]) # # Check to make sure that the build environment is sane. # AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 ! echo timestamp > conftestfile # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( ! set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` ! if test "[$]*" = "X"; then # -L didn't work. ! set X `ls -t $srcdir/configure conftestfile` fi ! if test "[$]*" != "X $srcdir/configure conftestfile" \ ! && test "[$]*" != "X conftestfile $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a --- 1,200 ---- ! # aclocal.m4 generated automatically by aclocal 1.5 ! # Copyright 1996, 1997, 1998, 1999, 2000, 2001 ! # Free Software Foundation, Inc. ! # This file is free software; the Free Software Foundation ! # gives unlimited permission to copy and/or distribute it, ! # with or without modifications, as long as this notice is preserved. ! ! # This program is distributed in the hope that it will be useful, ! # but WITHOUT ANY WARRANTY, to the extent permitted by law; without ! # even the implied warranty of MERCHANTABILITY or FITNESS FOR A ! # PARTICULAR PURPOSE. # Like AC_CONFIG_HEADER, but automatically create stamp file. + # serial 3 + + # When config.status generates a header, we must update the stamp-h file. + # This file resides in the same directory as the config header + # that is generated. We must strip everything past the first ":", + # and everything past the last "/". + + AC_PREREQ([2.12]) + AC_DEFUN([AM_CONFIG_HEADER], ! [ifdef([AC_FOREACH],dnl ! [dnl init our file count if it isn't already ! m4_ifndef([_AM_Config_Header_Index], m4_define([_AM_Config_Header_Index], [0])) ! dnl prepare to store our destination file list for use in config.status ! AC_FOREACH([_AM_File], [$1], ! [m4_pushdef([_AM_Dest], m4_patsubst(_AM_File, [:.*])) ! m4_define([_AM_Config_Header_Index], m4_incr(_AM_Config_Header_Index)) ! dnl and add it to the list of files AC keeps track of, along ! dnl with our hook ! AC_CONFIG_HEADERS(_AM_File, ! dnl COMMANDS, [, INIT-CMDS] ! [# update the timestamp ! echo timestamp >"AS_ESCAPE(_AM_DIRNAME(]_AM_Dest[))/stamp-h]_AM_Config_Header_Index[" ! ][$2]m4_ifval([$3], [, [$3]]))dnl AC_CONFIG_HEADERS ! m4_popdef([_AM_Dest])])],dnl ! [AC_CONFIG_HEADER([$1]) ! AC_OUTPUT_COMMANDS( ! ifelse(patsubst([$1], [[^ ]], []), ! [], ! [test -z "$CONFIG_HEADERS" || echo timestamp >dnl ! patsubst([$1], [^\([^:]*/\)?.*], [\1])stamp-h]),dnl ! [am_indx=1 ! for am_file in $1; do ! case " \$CONFIG_HEADERS " in ! *" \$am_file "*) ! am_dir=\`echo \$am_file |sed 's%:.*%%;s%[^/]*\$%%'\` ! if test -n "\$am_dir"; then ! am_tmpdir=\`echo \$am_dir |sed 's%^\(/*\).*\$%\1%'\` ! for am_subdir in \`echo \$am_dir |sed 's%/% %'\`; do ! am_tmpdir=\$am_tmpdir\$am_subdir/ ! if test ! -d \$am_tmpdir; then ! mkdir \$am_tmpdir ! fi ! done ! fi ! echo timestamp > "\$am_dir"stamp-h\$am_indx ;; esac ! am_indx=\`expr \$am_indx + 1\` ! done]) ! ])]) # AM_CONFIG_HEADER ! ! # _AM_DIRNAME(PATH) ! # ----------------- ! # Like AS_DIRNAME, only do it during macro expansion ! AC_DEFUN([_AM_DIRNAME], ! [m4_if(m4_regexp([$1], [^.*[^/]//*[^/][^/]*/*$]), -1, ! m4_if(m4_regexp([$1], [^//\([^/]\|$\)]), -1, ! m4_if(m4_regexp([$1], [^/.*]), -1, ! [.], ! m4_patsubst([$1], [^\(/\).*], [\1])), ! m4_patsubst([$1], [^\(//\)\([^/].*\|$\)], [\1])), ! m4_patsubst([$1], [^\(.*[^/]\)//*[^/][^/]*/*$], [\1]))[]dnl ! ]) # _AM_DIRNAME # Do all the work for Automake. This macro actually does too much -- # some checks are only needed if your package does certain things. # But this isn't really a big deal. ! # serial 5 ! ! # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be ! # written in clear, in which case automake, when reading aclocal.m4, ! # will think it sees a *use*, and therefore will trigger all it's ! # C support machinery. Also note that it means that autoscan, seeing ! # CC etc. in the Makefile, will ask for an AC_PROG_CC use... ! ! ! # We require 2.13 because we rely on SHELL being computed by configure. ! AC_PREREQ([2.13]) ! ! # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) ! # ----------------------------------------------------------- ! # If MACRO-NAME is provided do IF-PROVIDED, else IF-NOT-PROVIDED. ! # The purpose of this macro is to provide the user with a means to ! # check macros which are provided without letting her know how the ! # information is coded. ! # If this macro is not defined by Autoconf, define it here. ! ifdef([AC_PROVIDE_IFELSE], ! [], ! [define([AC_PROVIDE_IFELSE], ! [ifdef([AC_PROVIDE_$1], ! [$2], [$3])])]) + # AM_INIT_AUTOMAKE(PACKAGE,VERSION, [NO-DEFINE]) + # ---------------------------------------------- AC_DEFUN([AM_INIT_AUTOMAKE], ! [AC_REQUIRE([AC_PROG_INSTALL])dnl ! # test to see if srcdir already configured ! if test "`CDPATH=:; cd $srcdir && pwd`" != "`pwd`" && ! test -f $srcdir/config.status; then ! AC_MSG_ERROR([source directory already configured; run \"make distclean\" there first]) fi ! # Define the identity of the package. ! PACKAGE=$1 ! AC_SUBST(PACKAGE)dnl ! VERSION=$2 ! AC_SUBST(VERSION)dnl ! ifelse([$3],, ! [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) ! AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])]) ! # Autoconf 2.50 wants to disallow AM_ names. We explicitly allow ! # the ones we care about. ! ifdef([m4_pattern_allow], ! [m4_pattern_allow([^AM_[A-Z]+FLAGS])])dnl ! ! # Autoconf 2.50 always computes EXEEXT. However we need to be ! # compatible with 2.13, for now. So we always define EXEEXT, but we ! # don't compute it. ! AC_SUBST(EXEEXT) ! # Similar for OBJEXT -- only we only use OBJEXT if the user actually ! # requests that it be used. This is a bit dumb. ! : ${OBJEXT=o} ! AC_SUBST(OBJEXT) ! ! # Some tools Automake needs. ! AC_REQUIRE([AM_SANITY_CHECK])dnl ! AC_REQUIRE([AC_ARG_PROGRAM])dnl ! AM_MISSING_PROG(ACLOCAL, aclocal) ! AM_MISSING_PROG(AUTOCONF, autoconf) ! AM_MISSING_PROG(AUTOMAKE, automake) ! AM_MISSING_PROG(AUTOHEADER, autoheader) ! AM_MISSING_PROG(MAKEINFO, makeinfo) ! AM_MISSING_PROG(AMTAR, tar) ! AM_PROG_INSTALL_SH ! AM_PROG_INSTALL_STRIP ! # We need awk for the "check" target. The system "awk" is bad on ! # some platforms. ! AC_REQUIRE([AC_PROG_AWK])dnl ! AC_REQUIRE([AC_PROG_MAKE_SET])dnl ! AC_REQUIRE([AM_DEP_TRACK])dnl ! AC_REQUIRE([AM_SET_DEPDIR])dnl ! AC_PROVIDE_IFELSE([AC_PROG_][CC], ! [_AM_DEPENDENCIES(CC)], ! [define([AC_PROG_][CC], ! defn([AC_PROG_][CC])[_AM_DEPENDENCIES(CC)])])dnl ! AC_PROVIDE_IFELSE([AC_PROG_][CXX], ! [_AM_DEPENDENCIES(CXX)], ! [define([AC_PROG_][CXX], ! defn([AC_PROG_][CXX])[_AM_DEPENDENCIES(CXX)])])dnl ! ]) # # Check to make sure that the build environment is sane. # + # serial 3 + + # AM_SANITY_CHECK + # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 ! echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( ! set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` ! if test "$[*]" = "X"; then # -L didn't work. ! set X `ls -t $srcdir/configure conftest.file` fi ! rm -f conftest.file ! if test "$[*]" != "X $srcdir/configure conftest.file" \ ! && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a *************** *** 127,133 **** alias in your environment]) fi ! test "[$]2" = conftestfile ) then # Ok. --- 204,210 ---- alias in your environment]) fi ! test "$[2]" = conftest.file ) then # Ok. *************** *** 136,159 **** AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi - rm -f conftest* AC_MSG_RESULT(yes)]) ! dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) ! dnl The program must properly implement --version. AC_DEFUN([AM_MISSING_PROG], ! [AC_MSG_CHECKING(for working $2) ! # Run test in a subshell; some versions of sh will print an error if ! # an executable is not found, even if stderr is redirected. ! # Redirect stdin to placate older versions of autoconf. Sigh. ! if ($2 --version) < /dev/null > /dev/null 2>&1; then ! $1=$2 ! AC_MSG_RESULT(found) else ! $1="$3/missing $2" ! AC_MSG_RESULT(missing) fi ! AC_SUBST($1)]) # Add --enable-maintainer-mode option to configure. # From Jim Meyering --- 213,562 ---- AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT(yes)]) ! ! # serial 2 ! ! # AM_MISSING_PROG(NAME, PROGRAM) ! # ------------------------------ AC_DEFUN([AM_MISSING_PROG], ! [AC_REQUIRE([AM_MISSING_HAS_RUN]) ! $1=${$1-"${am_missing_run}$2"} ! AC_SUBST($1)]) ! ! ! # AM_MISSING_HAS_RUN ! # ------------------ ! # Define MISSING if not defined so far and test if it supports --run. ! # If it does, set am_missing_run to use it, otherwise, to nothing. ! AC_DEFUN([AM_MISSING_HAS_RUN], ! [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ! test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" ! # Use eval to expand $SHELL ! if eval "$MISSING --run true"; then ! am_missing_run="$MISSING --run " else ! am_missing_run= ! am_backtick='`' ! AC_MSG_WARN([${am_backtick}missing' script is too old or missing]) fi ! ]) ! ! # AM_AUX_DIR_EXPAND ! ! # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets ! # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to ! # `$srcdir', `$srcdir/..', or `$srcdir/../..'. ! # ! # Of course, Automake must honor this variable whenever it calls a ! # tool from the auxiliary directory. The problem is that $srcdir (and ! # therefore $ac_aux_dir as well) can be either absolute or relative, ! # depending on how configure is run. This is pretty annoying, since ! # it makes $ac_aux_dir quite unusable in subdirectories: in the top ! # source directory, any form will work fine, but in subdirectories a ! # relative path needs to be adjusted first. ! # ! # $ac_aux_dir/missing ! # fails when called from a subdirectory if $ac_aux_dir is relative ! # $top_srcdir/$ac_aux_dir/missing ! # fails if $ac_aux_dir is absolute, ! # fails when called from a subdirectory in a VPATH build with ! # a relative $ac_aux_dir ! # ! # The reason of the latter failure is that $top_srcdir and $ac_aux_dir ! # are both prefixed by $srcdir. In an in-source build this is usually ! # harmless because $srcdir is `.', but things will broke when you ! # start a VPATH build or use an absolute $srcdir. ! # ! # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, ! # iff we strip the leading $srcdir from $ac_aux_dir. That would be: ! # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` ! # and then we would define $MISSING as ! # MISSING="\${SHELL} $am_aux_dir/missing" ! # This will work as long as MISSING is not called from configure, because ! # unfortunately $(top_srcdir) has no meaning in configure. ! # However there are other variables, like CC, which are often used in ! # configure, and could therefore not use this "fixed" $ac_aux_dir. ! # ! # Another solution, used here, is to always expand $ac_aux_dir to an ! # absolute PATH. The drawback is that using absolute paths prevent a ! # configured tree to be moved without reconfiguration. ! ! AC_DEFUN([AM_AUX_DIR_EXPAND], [ ! # expand $ac_aux_dir to an absolute path ! am_aux_dir=`CDPATH=:; cd $ac_aux_dir && pwd` ! ]) ! ! # AM_PROG_INSTALL_SH ! # ------------------ ! # Define $install_sh. ! AC_DEFUN([AM_PROG_INSTALL_SH], ! [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ! install_sh=${install_sh-"$am_aux_dir/install-sh"} ! AC_SUBST(install_sh)]) ! ! # One issue with vendor `install' (even GNU) is that you can't ! # specify the program used to strip binaries. This is especially ! # annoying in cross-compiling environments, where the build's strip ! # is unlikely to handle the host's binaries. ! # Fortunately install-sh will honor a STRIPPROG variable, so we ! # always use install-sh in `make install-strip', and initialize ! # STRIPPROG with the value of the STRIP variable (set by the user). ! AC_DEFUN([AM_PROG_INSTALL_STRIP], ! [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl ! INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" ! AC_SUBST([INSTALL_STRIP_PROGRAM])]) ! ! # serial 4 -*- Autoconf -*- ! ! ! ! # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be ! # written in clear, in which case automake, when reading aclocal.m4, ! # will think it sees a *use*, and therefore will trigger all it's ! # C support machinery. Also note that it means that autoscan, seeing ! # CC etc. in the Makefile, will ask for an AC_PROG_CC use... ! ! ! ! # _AM_DEPENDENCIES(NAME) ! # --------------------- ! # See how the compiler implements dependency checking. ! # NAME is "CC", "CXX" or "OBJC". ! # We try a few techniques and use that to set a single cache variable. ! # ! # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was ! # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular ! # dependency, and given that the user is not expected to run this macro, ! # just rely on AC_PROG_CC. ! AC_DEFUN([_AM_DEPENDENCIES], ! [AC_REQUIRE([AM_SET_DEPDIR])dnl ! AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl ! AC_REQUIRE([AM_MAKE_INCLUDE])dnl ! AC_REQUIRE([AM_DEP_TRACK])dnl ! ! ifelse([$1], CC, [depcc="$CC" am_compiler_list=], ! [$1], CXX, [depcc="$CXX" am_compiler_list=], ! [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'] ! [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], ! [depcc="$$1" am_compiler_list=]) ! ! AC_CACHE_CHECK([dependency style of $depcc], ! [am_cv_$1_dependencies_compiler_type], ! [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then ! # We make a subdir and do the tests there. Otherwise we can end up ! # making bogus files that we don't know about and never remove. For ! # instance it was reported that on HP-UX the gcc test will end up ! # making a dummy file named `D' -- because `-MD' means `put the output ! # in D'. ! mkdir conftest.dir ! # Copy depcomp to subdir because otherwise we won't find it if we're ! # using a relative directory. ! cp "$am_depcomp" conftest.dir ! cd conftest.dir ! ! am_cv_$1_dependencies_compiler_type=none ! if test "$am_compiler_list" = ""; then ! am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` ! fi ! for depmode in $am_compiler_list; do ! # We need to recreate these files for each test, as the compiler may ! # overwrite some of them when testing with obscure command lines. ! # This happens at least with the AIX C compiler. ! echo '#include "conftest.h"' > conftest.c ! echo 'int i;' > conftest.h ! echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf ! ! case $depmode in ! nosideeffect) ! # after this tag, mechanisms are not by side-effect, so they'll ! # only be used when explicitly requested ! if test "x$enable_dependency_tracking" = xyes; then ! continue ! else ! break ! fi ! ;; ! none) break ;; ! esac ! # We check with `-c' and `-o' for the sake of the "dashmstdout" ! # mode. It turns out that the SunPro C++ compiler does not properly ! # handle `-M -o', and we need to detect this. ! if depmode=$depmode \ ! source=conftest.c object=conftest.o \ ! depfile=conftest.Po tmpdepfile=conftest.TPo \ ! $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 && ! grep conftest.h conftest.Po > /dev/null 2>&1 && ! ${MAKE-make} -s -f confmf > /dev/null 2>&1; then ! am_cv_$1_dependencies_compiler_type=$depmode ! break ! fi ! done ! ! cd .. ! rm -rf conftest.dir ! else ! am_cv_$1_dependencies_compiler_type=none ! fi ! ]) ! $1DEPMODE="depmode=$am_cv_$1_dependencies_compiler_type" ! AC_SUBST([$1DEPMODE]) ! ]) ! ! ! # AM_SET_DEPDIR ! # ------------- ! # Choose a directory name for dependency files. ! # This macro is AC_REQUIREd in _AM_DEPENDENCIES ! AC_DEFUN([AM_SET_DEPDIR], ! [rm -f .deps 2>/dev/null ! mkdir .deps 2>/dev/null ! if test -d .deps; then ! DEPDIR=.deps ! else ! # MS-DOS does not allow filenames that begin with a dot. ! DEPDIR=_deps ! fi ! rmdir .deps 2>/dev/null ! AC_SUBST(DEPDIR) ! ]) ! ! ! # AM_DEP_TRACK ! # ------------ ! AC_DEFUN([AM_DEP_TRACK], ! [AC_ARG_ENABLE(dependency-tracking, ! [ --disable-dependency-tracking Speeds up one-time builds ! --enable-dependency-tracking Do not reject slow dependency extractors]) ! if test "x$enable_dependency_tracking" != xno; then ! am_depcomp="$ac_aux_dir/depcomp" ! AMDEPBACKSLASH='\' ! fi ! AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) ! pushdef([subst], defn([AC_SUBST])) ! subst(AMDEPBACKSLASH) ! popdef([subst]) ! ]) ! ! # Generate code to set up dependency tracking. ! # This macro should only be invoked once -- use via AC_REQUIRE. ! # Usage: ! # AM_OUTPUT_DEPENDENCY_COMMANDS ! ! # ! # This code is only required when automatic dependency tracking ! # is enabled. FIXME. This creates each `.P' file that we will ! # need in order to bootstrap the dependency handling code. ! AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],[ ! AC_OUTPUT_COMMANDS([ ! test x"$AMDEP_TRUE" != x"" || ! for mf in $CONFIG_FILES; do ! case "$mf" in ! Makefile) dirpart=.;; ! */Makefile) dirpart=`echo "$mf" | sed -e 's|/[^/]*$||'`;; ! *) continue;; ! esac ! grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue ! # Extract the definition of DEP_FILES from the Makefile without ! # running `make'. ! DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"` ! test -z "$DEPDIR" && continue ! # When using ansi2knr, U may be empty or an underscore; expand it ! U=`sed -n -e '/^U = / s///p' < "$mf"` ! test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" ! # We invoke sed twice because it is the simplest approach to ! # changing $(DEPDIR) to its actual value in the expansion. ! for file in `sed -n -e ' ! /^DEP_FILES = .*\\\\$/ { ! s/^DEP_FILES = // ! :loop ! s/\\\\$// ! p ! n ! /\\\\$/ b loop ! p ! } ! /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ ! sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do ! # Make sure the directory exists. ! test -f "$dirpart/$file" && continue ! fdir=`echo "$file" | sed -e 's|/[^/]*$||'` ! $ac_aux_dir/mkinstalldirs "$dirpart/$fdir" > /dev/null 2>&1 ! # echo "creating $dirpart/$file" ! echo '# dummy' > "$dirpart/$file" ! done ! done ! ], [AMDEP_TRUE="$AMDEP_TRUE" ! ac_aux_dir="$ac_aux_dir"])]) ! ! # AM_MAKE_INCLUDE() ! # ----------------- ! # Check to see how make treats includes. ! AC_DEFUN([AM_MAKE_INCLUDE], ! [am_make=${MAKE-make} ! cat > confinc << 'END' ! doit: ! @echo done ! END ! # If we don't find an include directive, just comment out the code. ! AC_MSG_CHECKING([for style of include used by $am_make]) ! am__include='#' ! am__quote= ! _am_result=none ! # First try GNU make style include. ! echo "include confinc" > confmf ! # We grep out `Entering directory' and `Leaving directory' ! # messages which can occur if `w' ends up in MAKEFLAGS. ! # In particular we don't look at `^make:' because GNU make might ! # be invoked under some other name (usually "gmake"), in which ! # case it prints its new name instead of `make'. ! if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then ! am__include=include ! am__quote= ! _am_result=GNU ! fi ! # Now try BSD make style include. ! if test "$am__include" = "#"; then ! echo '.include "confinc"' > confmf ! if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then ! am__include=.include ! am__quote='"' ! _am_result=BSD ! fi ! fi ! AC_SUBST(am__include) ! AC_SUBST(am__quote) ! AC_MSG_RESULT($_am_result) ! rm -f confinc confmf ! ]) ! ! # serial 3 ! ! # AM_CONDITIONAL(NAME, SHELL-CONDITION) ! # ------------------------------------- ! # Define a conditional. ! # ! # FIXME: Once using 2.50, use this: ! # m4_match([$1], [^TRUE\|FALSE$], [AC_FATAL([$0: invalid condition: $1])])dnl ! AC_DEFUN([AM_CONDITIONAL], ! [ifelse([$1], [TRUE], ! [errprint(__file__:__line__: [$0: invalid condition: $1 ! ])dnl ! m4exit(1)])dnl ! ifelse([$1], [FALSE], ! [errprint(__file__:__line__: [$0: invalid condition: $1 ! ])dnl ! m4exit(1)])dnl ! AC_SUBST([$1_TRUE]) ! AC_SUBST([$1_FALSE]) ! if $2; then ! $1_TRUE= ! $1_FALSE='#' ! else ! $1_TRUE='#' ! $1_FALSE= ! fi]) # Add --enable-maintainer-mode option to configure. # From Jim Meyering *************** *** 168,192 **** (and sometimes confusing) to the casual installer], USE_MAINTAINER_MODE=$enableval, USE_MAINTAINER_MODE=no) ! AC_MSG_RESULT($USE_MAINTAINER_MODE) ! AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes) MAINT=$MAINTAINER_MODE_TRUE AC_SUBST(MAINT)dnl ] ) - # Define a conditional. - - AC_DEFUN([AM_CONDITIONAL], - [AC_SUBST($1_TRUE) - AC_SUBST($1_FALSE) - if $2; then - $1_TRUE= - $1_FALSE='#' - else - $1_TRUE='#' - $1_FALSE= - fi]) dnl AC_PROG_INTLTOOL([MINIMUM-VERSION]) --- 571,583 ---- (and sometimes confusing) to the casual installer], USE_MAINTAINER_MODE=$enableval, USE_MAINTAINER_MODE=no) ! AC_MSG_RESULT([$USE_MAINTAINER_MODE]) ! AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes]) MAINT=$MAINTAINER_MODE_TRUE AC_SUBST(MAINT)dnl ] ) dnl AC_PROG_INTLTOOL([MINIMUM-VERSION]) *************** *** 502,507 **** --- 893,900 ---- [CATOBJEXT=.mo DATADIRNAME=lib]) INSTOBJEXT=.mo + else + gt_cv_have_gettext=no fi fi ]) diff -crN ./gnome-mime-data/configure /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./gnome-mime-data/configure *** ./gnome-mime-data/configure Tue Feb 4 10:06:14 2003 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./gnome-mime-data/configure Sat Aug 9 21:17:45 2003 *************** *** 1,11 **** #! /bin/sh # Guess values for system-dependent variables and create Makefiles. ! # Generated by GNU Autoconf 2.57. # # Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 # Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## --- 1,19 ---- #! /bin/sh # Guess values for system-dependent variables and create Makefiles. ! # Generated by GNU Autoconf 2.53. # # Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 # Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. + + if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr + else + as_expr=false + fi + + ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## *************** *** 14,26 **** if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi # Support unset when possible. if (FOO=FOO; unset FOO) >/dev/null 2>&1; then as_unset=unset --- 22,32 ---- if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi + # NLS nuisances. # Support unset when possible. if (FOO=FOO; unset FOO) >/dev/null 2>&1; then as_unset=unset *************** *** 28,69 **** as_unset=false fi ! ! # Work around bugs in pre-3.0 UWIN ksh. ! $as_unset ENV MAIL MAILPATH ! PS1='$ ' ! PS2='> ' ! PS4='+ ' ! ! # NLS nuisances. ! for as_var in \ ! LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ ! LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ ! LC_TELEPHONE LC_TIME ! do ! if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then ! eval $as_var=C; export $as_var ! else ! $as_unset $as_var ! fi ! done ! ! # Required to use basename. ! if expr a : '\(a\)' >/dev/null 2>&1; then ! as_expr=expr ! else ! as_expr=false ! fi ! ! if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then ! as_basename=basename ! else ! as_basename=false ! fi # Name of the executable. ! as_me=`$as_basename "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ --- 34,67 ---- as_unset=false fi ! (set +x; test -n "`(LANG=C; export LANG) 2>&1`") && ! { $as_unset LANG || test "${LANG+set}" != set; } || ! { LANG=C; export LANG; } ! (set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") && ! { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } || ! { LC_ALL=C; export LC_ALL; } ! (set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") && ! { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } || ! { LC_TIME=C; export LC_TIME; } ! (set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") && ! { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } || ! { LC_CTYPE=C; export LC_CTYPE; } ! (set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") && ! { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } || ! { LANGUAGE=C; export LANGUAGE; } ! (set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") && ! { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } || ! { LC_COLLATE=C; export LC_COLLATE; } ! (set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") && ! { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } || ! { LC_NUMERIC=C; export LC_NUMERIC; } ! (set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") && ! { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } || ! { LC_MESSAGES=C; export LC_MESSAGES; } # Name of the executable. ! as_me=`(basename "$0") 2>/dev/null || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ *************** *** 74,80 **** /^X\/\(\/\).*/{ s//\1/; q; } s/.*/./; q'` - # PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' --- 72,77 ---- *************** *** 85,99 **** # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then ! echo "#! /bin/sh" >conf$$.sh ! echo "exit 0" >>conf$$.sh ! chmod +x conf$$.sh ! if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi ! rm -f conf$$.sh fi --- 82,96 ---- # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then ! echo "#! /bin/sh" >conftest.sh ! echo "exit 0" >>conftest.sh ! chmod +x conftest.sh ! if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi ! rm -f conftest.sh fi *************** *** 141,148 **** as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } CONFIG_SHELL=$as_dir/$as_base export CONFIG_SHELL exec "$CONFIG_SHELL" "$0" ${1+"$@"} --- 138,143 ---- *************** *** 215,226 **** fi rm -f conf$$ conf$$.exe conf$$.file - if mkdir -p . 2>/dev/null; then - as_mkdir_p=: - else - as_mkdir_p=false - fi - as_executable_p="test -f" # Sed expression to map a string onto a valid CPP name. --- 210,215 ---- *************** *** 237,243 **** IFS=" $as_nl" # CDPATH. ! $as_unset CDPATH # Name of the host. --- 226,232 ---- IFS=" $as_nl" # CDPATH. ! $as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; } # Name of the host. *************** *** 251,257 **** # Initializations. # ac_default_prefix=/usr/local - ac_config_libobj_dir=. cross_compiling=no subdirs= MFLAGS= --- 240,245 ---- *************** *** 308,315 **** # include #endif" - ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO SET_MAKE MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT INTLTOOL_DESKTOP_RULE INTLTOOL_DIRECTORY_RULE INTLTOOL_KEYS_RULE INTLTOOL_PROP_RULE INTLTOOL_OAF_RULE INTLTOOL_PONG_RULE INTLTOOL_SERVER_RULE INTLTOOL_SHEET_RULE INTLTOOL_SOUNDLIST_RULE INTLTOOL_UI_RULE INTLTOOL_XML_RULE INTLTOOL_CAVES_RULE INTLTOOL_SCHEMAS_RULE INTLTOOL_THEME_RULE INTLTOOL_EXTRACT INTLTOOL_MERGE INTLTOOL_UPDATE INTLTOOL_PERL GETTEXT_PACKAGE CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT CPP EGREP USE_NLS MSGFMT GMSGFMT XGETTEXT CATALOGS CATOBJEXT DATADIRNAME GMOFILES INSTOBJEXT INTLLIBS PO_IN_DATADIR_TRUE PO_IN_DATADIR_FALSE POFILES POSUB MKINSTALLDIRS LIBOBJS LTLIBOBJS' - ac_subst_files='' # Initialize some variables set by options. ac_init_help= --- 296,301 ---- *************** *** 733,741 **** { (exit 1); exit 1; }; } fi fi - (cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || - { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 - { (exit 1); exit 1; }; } srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` ac_env_build_alias_set=${build_alias+set} ac_env_build_alias_value=$build_alias --- 719,724 ---- *************** *** 844,849 **** --- 827,834 ---- Optional Features: --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --disable-dependency-tracking Speeds up one-time builds + --enable-dependency-tracking Do not reject slow dependency extractors --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer *************** *** 895,901 **** # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be # absolute. ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` ! ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` --- 880,886 ---- # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be # absolute. ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` ! ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd` ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` *************** *** 935,941 **** running configure, to aid debugging if configure makes a mistake. It was created by $as_me, which was ! generated by GNU Autoconf 2.57. Invocation command line was $ $0 $@ --- 920,926 ---- running configure, to aid debugging if configure makes a mistake. It was created by $as_me, which was ! generated by GNU Autoconf 2.53. Invocation command line was $ $0 $@ *************** *** 987,1040 **** # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. - # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. - # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= - ac_configure_args0= - ac_configure_args1= ac_sep= ! ac_must_keep_next=false ! for ac_pass in 1 2 do ! for ac_arg ! do ! case $ac_arg in ! -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; ! -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ! | -silent | --silent | --silen | --sile | --sil) ! continue ;; ! *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) ! ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; ! esac ! case $ac_pass in ! 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; ! 2) ! ac_configure_args1="$ac_configure_args1 '$ac_arg'" ! if test $ac_must_keep_next = true; then ! ac_must_keep_next=false # Got value, back to normal. ! else ! case $ac_arg in ! *=* | --config-cache | -C | -disable-* | --disable-* \ ! | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ ! | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ ! | -with-* | --with-* | -without-* | --without-* | --x) ! case "$ac_configure_args0 " in ! "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; ! esac ! ;; ! -* ) ac_must_keep_next=true ;; ! esac ! fi ! ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" ! # Get rid of the leading space. ! ac_sep=" " ! ;; ! esac ! done done - $as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } - $as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there --- 972,998 ---- # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Also quote any args containing shell meta-characters. ac_configure_args= ac_sep= ! for ac_arg do ! case $ac_arg in ! -no-create | --no-create | --no-creat | --no-crea | --no-cre \ ! | --no-cr | --no-c | -n ) continue ;; ! -no-recursion | --no-recursion | --no-recursio | --no-recursi \ ! | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ! continue ;; ! *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) ! ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; ! esac ! case " $ac_configure_args " in ! *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. ! *) ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" ! ac_sep=" " ;; ! esac ! # Get rid of the leading space. done # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there *************** *** 1045,1051 **** # Save into config.log some information that might help in debugging. { echo - cat <<\_ASBOX ## ---------------- ## ## Cache variables. ## --- 1003,1008 ---- *************** *** 1068,1102 **** esac; } echo - - cat <<\_ASBOX - ## ----------------- ## - ## Output variables. ## - ## ----------------- ## - _ASBOX - echo - for ac_var in $ac_subst_vars - do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" - done | sort - echo - - if test -n "$ac_subst_files"; then - cat <<\_ASBOX - ## ------------- ## - ## Output files. ## - ## ------------- ## - _ASBOX - echo - for ac_var in $ac_subst_files - do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" - done | sort - echo - fi - if test -s confdefs.h; then cat <<\_ASBOX ## ----------- ## --- 1025,1030 ---- *************** *** 1104,1110 **** ## ----------- ## _ASBOX echo ! sed "/^$/d" confdefs.h | sort echo fi test "$ac_signal" != 0 && --- 1032,1038 ---- ## ----------- ## _ASBOX echo ! sed "/^$/d" confdefs.h echo fi test "$ac_signal" != 0 && *************** *** 1263,1273 **** - ac_config_headers="$ac_config_headers config.h" ! ac_config_commands="$ac_config_commands default-1" - am__api_version="1.4" ac_aux_dir= for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do if test -f $ac_dir/install-sh; then --- 1191,1199 ---- ! ac_config_headers="$ac_config_headers config.h" ac_aux_dir= for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do if test -f $ac_dir/install-sh; then *************** *** 1374,1393 **** echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 # Just in case sleep 1 ! echo timestamp > conftestfile # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( ! set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` if test "$*" = "X"; then # -L didn't work. ! set X `ls -t $srcdir/configure conftestfile` fi ! if test "$*" != "X $srcdir/configure conftestfile" \ ! && test "$*" != "X conftestfile $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a --- 1300,1320 ---- echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 # Just in case sleep 1 ! echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( ! set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. ! set X `ls -t $srcdir/configure conftest.file` fi ! rm -f conftest.file ! if test "$*" != "X $srcdir/configure conftest.file" \ ! && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a *************** *** 1400,1406 **** { (exit 1); exit 1; }; } fi ! test "$2" = conftestfile ) then # Ok. --- 1327,1333 ---- { (exit 1); exit 1; }; } fi ! test "$2" = conftest.file ) then # Ok. *************** *** 1412,1418 **** Check your system clock" >&2;} { (exit 1); exit 1; }; } fi - rm -f conftest* echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 test "$program_prefix" != NONE && --- 1339,1344 ---- *************** *** 1428,1442 **** program_transform_name=`echo $program_transform_name | sed -f conftest.sed` rm conftest.sed ! echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 ! echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'` if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.make <<\_ACEOF all: ! @echo 'ac_maketemp="$(MAKE)"' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` --- 1354,1423 ---- program_transform_name=`echo $program_transform_name | sed -f conftest.sed` rm conftest.sed ! ! # expand $ac_aux_dir to an absolute path ! am_aux_dir=`CDPATH=:; cd $ac_aux_dir && pwd` ! ! test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" ! # Use eval to expand $SHELL ! if eval "$MISSING --run true"; then ! am_missing_run="$MISSING --run " ! else ! am_missing_run= ! am_backtick='`' ! { echo "$as_me:$LINENO: WARNING: ${am_backtick}missing' script is too old or missing" >&5 ! echo "$as_me: WARNING: ${am_backtick}missing' script is too old or missing" >&2;} ! fi ! ! for ac_prog in gawk mawk nawk awk ! do ! # Extract the first word of "$ac_prog", so it can be a program name with args. ! set dummy $ac_prog; ac_word=$2 ! echo "$as_me:$LINENO: checking for $ac_word" >&5 ! echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ! if test "${ac_cv_prog_AWK+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! if test -n "$AWK"; then ! ac_cv_prog_AWK="$AWK" # Let the user override the test. ! else ! as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ! for as_dir in $PATH ! do ! IFS=$as_save_IFS ! test -z "$as_dir" && as_dir=. ! for ac_exec_ext in '' $ac_executable_extensions; do ! if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ! ac_cv_prog_AWK="$ac_prog" ! echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ! break 2 ! fi ! done ! done ! ! fi ! fi ! AWK=$ac_cv_prog_AWK ! if test -n "$AWK"; then ! echo "$as_me:$LINENO: result: $AWK" >&5 ! echo "${ECHO_T}$AWK" >&6 ! else ! echo "$as_me:$LINENO: result: no" >&5 ! echo "${ECHO_T}no" >&6 ! fi ! ! test -n "$AWK" && break ! done ! ! echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \${MAKE}" >&5 ! echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'` if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.make <<\_ACEOF all: ! @echo 'ac_maketemp="${MAKE}"' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` *************** *** 1457,1473 **** SET_MAKE="MAKE=${MAKE-make}" fi ! PACKAGE=gnome-mime-data - VERSION=2.2.0 ! if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} { (exit 1); exit 1; }; } fi cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF --- 1438,1488 ---- SET_MAKE="MAKE=${MAKE-make}" fi + # Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. + if test "${enable_dependency_tracking+set}" = set; then + enableval="$enable_dependency_tracking" ! fi; ! if test "x$enable_dependency_tracking" != xno; then ! am_depcomp="$ac_aux_dir/depcomp" ! AMDEPBACKSLASH='\' ! fi ! if test "x$enable_dependency_tracking" != xno; then ! AMDEP_TRUE= ! AMDEP_FALSE='#' ! else ! AMDEP_TRUE='#' ! AMDEP_FALSE= ! fi ! ! ! ! ! rm -f .deps 2>/dev/null ! mkdir .deps 2>/dev/null ! if test -d .deps; then ! DEPDIR=.deps ! else ! # MS-DOS does not allow filenames that begin with a dot. ! DEPDIR=_deps ! fi ! rmdir .deps 2>/dev/null ! ! ! # test to see if srcdir already configured ! if test "`CDPATH=:; cd $srcdir && pwd`" != "`pwd`" && ! test -f $srcdir/config.status; then { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} { (exit 1); exit 1; }; } fi + # Define the identity of the package. + PACKAGE=gnome-mime-data + VERSION=2.2.0 + cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF *************** *** 1478,1560 **** _ACEOF - missing_dir=`cd $ac_aux_dir && pwd` - echo "$as_me:$LINENO: checking for working aclocal-${am__api_version}" >&5 - echo $ECHO_N "checking for working aclocal-${am__api_version}... $ECHO_C" >&6 - # Run test in a subshell; some versions of sh will print an error if - # an executable is not found, even if stderr is redirected. - # Redirect stdin to placate older versions of autoconf. Sigh. - if (aclocal-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then - ACLOCAL=aclocal-${am__api_version} - echo "$as_me:$LINENO: result: found" >&5 - echo "${ECHO_T}found" >&6 - else - ACLOCAL="$missing_dir/missing aclocal-${am__api_version}" - echo "$as_me:$LINENO: result: missing" >&5 - echo "${ECHO_T}missing" >&6 - fi - - echo "$as_me:$LINENO: checking for working autoconf" >&5 - echo $ECHO_N "checking for working autoconf... $ECHO_C" >&6 - # Run test in a subshell; some versions of sh will print an error if - # an executable is not found, even if stderr is redirected. - # Redirect stdin to placate older versions of autoconf. Sigh. - if (autoconf --version) < /dev/null > /dev/null 2>&1; then - AUTOCONF=autoconf - echo "$as_me:$LINENO: result: found" >&5 - echo "${ECHO_T}found" >&6 - else - AUTOCONF="$missing_dir/missing autoconf" - echo "$as_me:$LINENO: result: missing" >&5 - echo "${ECHO_T}missing" >&6 - fi - - echo "$as_me:$LINENO: checking for working automake-${am__api_version}" >&5 - echo $ECHO_N "checking for working automake-${am__api_version}... $ECHO_C" >&6 - # Run test in a subshell; some versions of sh will print an error if - # an executable is not found, even if stderr is redirected. - # Redirect stdin to placate older versions of autoconf. Sigh. - if (automake-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then - AUTOMAKE=automake-${am__api_version} - echo "$as_me:$LINENO: result: found" >&5 - echo "${ECHO_T}found" >&6 - else - AUTOMAKE="$missing_dir/missing automake-${am__api_version}" - echo "$as_me:$LINENO: result: missing" >&5 - echo "${ECHO_T}missing" >&6 - fi - - echo "$as_me:$LINENO: checking for working autoheader" >&5 - echo $ECHO_N "checking for working autoheader... $ECHO_C" >&6 - # Run test in a subshell; some versions of sh will print an error if - # an executable is not found, even if stderr is redirected. - # Redirect stdin to placate older versions of autoconf. Sigh. - if (autoheader --version) < /dev/null > /dev/null 2>&1; then - AUTOHEADER=autoheader - echo "$as_me:$LINENO: result: found" >&5 - echo "${ECHO_T}found" >&6 - else - AUTOHEADER="$missing_dir/missing autoheader" - echo "$as_me:$LINENO: result: missing" >&5 - echo "${ECHO_T}missing" >&6 - fi - - echo "$as_me:$LINENO: checking for working makeinfo" >&5 - echo $ECHO_N "checking for working makeinfo... $ECHO_C" >&6 - # Run test in a subshell; some versions of sh will print an error if - # an executable is not found, even if stderr is redirected. - # Redirect stdin to placate older versions of autoconf. Sigh. - if (makeinfo --version) < /dev/null > /dev/null 2>&1; then - MAKEINFO=makeinfo - echo "$as_me:$LINENO: result: found" >&5 - echo "${ECHO_T}found" >&6 - else - MAKEINFO="$missing_dir/missing makeinfo" - echo "$as_me:$LINENO: result: missing" >&5 - echo "${ECHO_T}missing" >&6 - fi echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 --- 1493,1535 ---- _ACEOF + # Autoconf 2.50 wants to disallow AM_ names. We explicitly allow + # the ones we care about. + + # Autoconf 2.50 always computes EXEEXT. However we need to be + # compatible with 2.13, for now. So we always define EXEEXT, but we + # don't compute it. + + # Similar for OBJEXT -- only we only use OBJEXT if the user actually + # requests that it be used. This is a bit dumb. + : ${OBJEXT=o} + # Some tools Automake needs. + + ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal"} + + + AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + + AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake"} + + + AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + + MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + + + AMTAR=${AMTAR-"${am_missing_run}tar"} + + install_sh=${install_sh-"$am_aux_dir/install-sh"} + + INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" + + # We need awk for the "check" target. The system "awk" is bad on + # some platforms. echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 *************** *** 1703,1709 **** # Manually sed perl in so people don't have to put the intltool scripts in AC_OUTPUT. ! ac_config_commands="$ac_config_commands default-2" --- 1678,1684 ---- # Manually sed perl in so people don't have to put the intltool scripts in AC_OUTPUT. ! ac_config_commands="$ac_config_commands default-1" *************** *** 1711,1716 **** --- 1686,1732 ---- ALL_LINGUAS="am az be bg ca da de el es et eu fi fr ga gl he hi hu it ja ko lt lv mk mn ms nl nn no pl pt pt_BR ro ru sk sl sv tr uk vi wa zh_CN zh_TW" GETTEXT_PACKAGE=gnome-mime-data + + ac_config_commands="$ac_config_commands default-2" + + am_make=${MAKE-make} + cat > confinc << 'END' + doit: + @echo done + END + # If we don't find an include directive, just comment out the code. + echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 + echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 + am__include='#' + am__quote= + _am_result=none + # First try GNU make style include. + echo "include confinc" > confmf + # We grep out `Entering directory' and `Leaving directory' + # messages which can occur if `w' ends up in MAKEFLAGS. + # In particular we don't look at `^make:' because GNU make might + # be invoked under some other name (usually "gmake"), in which + # case it prints its new name instead of `make'. + if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then + am__include=include + am__quote= + _am_result=GNU + fi + # Now try BSD make style include. + if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then + am__include=.include + am__quote='"' + _am_result=BSD + fi + fi + + + echo "$as_me:$LINENO: result: $_am_result" >&5 + echo "${ECHO_T}$_am_result" >&6 + rm -f confinc confmf + ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' *************** *** 1915,1921 **** # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ! ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi --- 1931,1939 ---- # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ! set dummy "$as_dir/$ac_word" ${1+"$@"} ! shift ! ac_cv_prog_CC="$@" fi fi fi *************** *** 2020,2029 **** fi ! test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH ! See \`config.log' for more details." >&5 ! echo "$as_me: error: no acceptable C compiler found in \$PATH ! See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } # Provide some information about the compiler. --- 2038,2045 ---- fi ! test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH" >&5 ! echo "$as_me: error: no acceptable C compiler found in \$PATH" >&2;} { (exit 1); exit 1; }; } # Provide some information about the compiler. *************** *** 2048,2059 **** cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ int main () { --- 2064,2077 ---- cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif int main () { *************** *** 2063,2069 **** } _ACEOF ac_clean_files_save=$ac_clean_files ! ac_clean_files="$ac_clean_files a.out a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. --- 2081,2087 ---- } _ACEOF ac_clean_files_save=$ac_clean_files ! ac_clean_files="$ac_clean_files a.out a.exe" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. *************** *** 2082,2120 **** # Be careful to initialize this variable, since it used to be cached. # Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. ac_cv_exeext= ! # b.out is created by i960 compilers. ! for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out ! do ! test -f "$ac_file" || continue case $ac_file in ! *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ! ;; ! conftest.$ac_ext ) ! # This is the source file. ! ;; ! [ab].out ) ! # We found the default executable, but exeext='' is most ! # certainly right. ! break;; ! *.* ) ! ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` ! # FIXME: I believe we export ac_cv_exeext for Libtool, ! # but it would be cool to find out if it's true. Does anybody ! # maintain Libtool? --akim. ! export ac_cv_exeext ! break;; ! * ) ! break;; esac done else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ! { { echo "$as_me:$LINENO: error: C compiler cannot create executables ! See \`config.log' for more details." >&5 ! echo "$as_me: error: C compiler cannot create executables ! See \`config.log' for more details." >&2;} { (exit 77); exit 77; }; } fi --- 2100,2125 ---- # Be careful to initialize this variable, since it used to be cached. # Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. ac_cv_exeext= ! for ac_file in `ls a_out.exe a.exe conftest.exe 2>/dev/null; ! ls a.out conftest 2>/dev/null; ! ls a.* conftest.* 2>/dev/null`; do case $ac_file in ! *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb | *.xSYM ) ;; ! a.out ) # We found the default executable, but exeext='' is most ! # certainly right. ! break;; ! *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` ! # FIXME: I believe we export ac_cv_exeext for Libtool --akim. ! export ac_cv_exeext ! break;; ! * ) break;; esac done else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! { { echo "$as_me:$LINENO: error: C compiler cannot create executables" >&5 ! echo "$as_me: error: C compiler cannot create executables" >&2;} { (exit 77); exit 77; }; } fi *************** *** 2141,2151 **** cross_compiling=yes else { { echo "$as_me:$LINENO: error: cannot run C compiled programs. ! If you meant to cross compile, use \`--host'. ! See \`config.log' for more details." >&5 echo "$as_me: error: cannot run C compiled programs. ! If you meant to cross compile, use \`--host'. ! See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi fi --- 2146,2154 ---- cross_compiling=yes else { { echo "$as_me:$LINENO: error: cannot run C compiled programs. ! If you meant to cross compile, use \`--host'." >&5 echo "$as_me: error: cannot run C compiled programs. ! If you meant to cross compile, use \`--host'." >&2;} { (exit 1); exit 1; }; } fi fi *************** *** 2153,2159 **** echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 ! rm -f a.out a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save # Check the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. --- 2156,2162 ---- echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 ! rm -f a.out a.exe conftest$ac_cv_exeext ac_clean_files=$ac_clean_files_save # Check the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. *************** *** 2173,2182 **** # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. ! for ac_file in conftest.exe conftest conftest.*; do ! test -f "$ac_file" || continue case $ac_file in ! *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` export ac_cv_exeext break;; --- 2176,2184 ---- # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. ! for ac_file in `(ls conftest.exe; ls conftest; ls conftest.*) 2>/dev/null`; do case $ac_file in ! *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` export ac_cv_exeext break;; *************** *** 2184,2193 **** esac done else ! { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link ! See \`config.log' for more details." >&5 ! echo "$as_me: error: cannot compute suffix of executables: cannot compile and link ! See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi --- 2186,2193 ---- esac done else ! { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link" >&5 ! echo "$as_me: error: cannot compute suffix of executables: cannot compile and link" >&2;} { (exit 1); exit 1; }; } fi *************** *** 2205,2216 **** else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ int main () { --- 2205,2218 ---- else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif int main () { *************** *** 2227,2245 **** (exit $ac_status); }; then for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do case $ac_file in ! *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ! { { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile ! See \`config.log' for more details." >&5 ! echo "$as_me: error: cannot compute suffix of object files: cannot compile ! See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi --- 2229,2244 ---- (exit $ac_status); }; then for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do case $ac_file in ! *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! { { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile" >&5 ! echo "$as_me: error: cannot compute suffix of object files: cannot compile" >&2;} { (exit 1); exit 1; }; } fi *************** *** 2256,2267 **** else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ int main () { --- 2255,2268 ---- else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif int main () { *************** *** 2288,2295 **** ac_compiler_gnu=yes else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ac_compiler_gnu=no fi rm -f conftest.$ac_objext conftest.$ac_ext --- 2289,2295 ---- ac_compiler_gnu=yes else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ac_compiler_gnu=no fi rm -f conftest.$ac_objext conftest.$ac_ext *************** *** 2309,2320 **** else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ int main () { --- 2309,2322 ---- else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif int main () { *************** *** 2338,2345 **** ac_cv_prog_cc_g=yes else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ac_cv_prog_cc_g=no fi rm -f conftest.$ac_objext conftest.$ac_ext --- 2340,2346 ---- ac_cv_prog_cc_g=yes else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ac_cv_prog_cc_g=no fi rm -f conftest.$ac_objext conftest.$ac_ext *************** *** 2361,2462 **** CFLAGS= fi fi - echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 - echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 - if test "${ac_cv_prog_cc_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else - ac_cv_prog_cc_stdc=no - ac_save_CC=$CC - cat >conftest.$ac_ext <<_ACEOF - #line $LINENO "configure" - /* confdefs.h. */ - _ACEOF - cat confdefs.h >>conftest.$ac_ext - cat >>conftest.$ac_ext <<_ACEOF - /* end confdefs.h. */ - #include - #include - #include - #include - /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ - struct buf { int x; }; - FILE * (*rcsopen) (struct buf *, struct stat *, int); - static char *e (p, i) - char **p; - int i; - { - return p[i]; - } - static char *f (char * (*g) (char **, int), char **p, ...) - { - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; - } - int test (int i, double x); - struct s1 {int (*f) (int a);}; - struct s2 {int (*f) (double a);}; - int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); - int argc; - char **argv; - int - main () - { - return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; - } - _ACEOF - # Don't try gcc -ansi; that turns off useful extensions and - # breaks some systems' header files. - # AIX -qlanglvl=ansi - # Ultrix and OSF/1 -std1 - # HP-UX 10.20 and later -Ae - # HP-UX older versions -Aa -D_HPUX_SOURCE - # SVR4 -Xc -D__EXTENSIONS__ - for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" - do - CC="$ac_save_CC $ac_arg" - rm -f conftest.$ac_objext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cc_stdc=$ac_arg - break - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - - fi - rm -f conftest.$ac_objext - done - rm -f conftest.$ac_ext conftest.$ac_objext - CC=$ac_save_CC - - fi - - case "x$ac_cv_prog_cc_stdc" in - x|xno) - echo "$as_me:$LINENO: result: none needed" >&5 - echo "${ECHO_T}none needed" >&6 ;; - *) - echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 - echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 - CC="$CC $ac_cv_prog_cc_stdc" ;; - esac - # Some people use a C++ compiler to compile C. Since we use `exit', # in C++ we need to declare it. In case someone uses the same compiler # for both compiling C and C++ we need to have the C++ compiler decide --- 2362,2367 ---- *************** *** 2489,2501 **** do cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ #include $ac_declaration int main () { --- 2394,2408 ---- do cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" #include $ac_declaration + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif int main () { *************** *** 2519,2537 **** : else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! continue fi rm -f conftest.$ac_objext conftest.$ac_ext cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ $ac_declaration int main () { --- 2426,2445 ---- : else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 continue fi rm -f conftest.$ac_objext conftest.$ac_ext cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" $ac_declaration + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif int main () { *************** *** 2555,2562 **** break else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! fi rm -f conftest.$ac_objext conftest.$ac_ext done --- 2463,2469 ---- break else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 fi rm -f conftest.$ac_objext conftest.$ac_ext done *************** *** 2569,2576 **** else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! fi rm -f conftest.$ac_objext conftest.$ac_ext ac_ext=c --- 2476,2482 ---- else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 fi rm -f conftest.$ac_objext conftest.$ac_ext ac_ext=c *************** *** 2579,2584 **** --- 2485,2559 ---- ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu + depcc="$CC" am_compiler_list= + + echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 + echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 + if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + for depmode in $am_compiler_list; do + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + echo '#include "conftest.h"' > conftest.c + echo 'int i;' > conftest.h + echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf + + case $depmode in + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + none) break ;; + esac + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. + if depmode=$depmode \ + source=conftest.c object=conftest.o \ + depfile=conftest.Po tmpdepfile=conftest.TPo \ + $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 && + grep conftest.h conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + done + + cd .. + rm -rf conftest.dir + else + am_cv_CC_dependencies_compiler_type=none + fi + + fi + echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 + echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 + CCDEPMODE="depmode=$am_cv_CC_dependencies_compiler_type" + + ac_ext=c ac_cpp='$CPP $CPPFLAGS' *************** *** 2603,2630 **** do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ ! #ifdef __STDC__ ! # include ! #else ! # include ! #endif Syntax error _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? ! grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 --- 2578,2595 ---- do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" ! #include Syntax error _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? ! egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 *************** *** 2641,2648 **** : else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! # Broken: fails on valid input. continue fi --- 2606,2612 ---- : else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi *************** *** 2652,2668 **** # can be detected and how. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? ! grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 --- 2616,2628 ---- # can be detected and how. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? ! egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 *************** *** 2680,2687 **** continue else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! # Passes both tests. ac_preproc_ok=: break --- 2640,2646 ---- continue else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break *************** *** 2710,2737 **** do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ ! #ifdef __STDC__ ! # include ! #else ! # include ! #endif Syntax error _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? ! grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 --- 2669,2686 ---- do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" ! #include Syntax error _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? ! egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 *************** *** 2748,2755 **** : else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! # Broken: fails on valid input. continue fi --- 2697,2703 ---- : else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi *************** *** 2759,2775 **** # can be detected and how. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? ! grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 --- 2707,2719 ---- # can be detected and how. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? ! egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 *************** *** 2787,2794 **** continue else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! # Passes both tests. ac_preproc_ok=: break --- 2731,2737 ---- continue else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break *************** *** 2801,2810 **** if $ac_preproc_ok; then : else ! { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check ! See \`config.log' for more details." >&5 ! echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check ! See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi --- 2744,2751 ---- if $ac_preproc_ok; then : else ! { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check" >&5 ! echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check" >&2;} { (exit 1); exit 1; }; } fi *************** *** 2815,2835 **** ac_compiler_gnu=$ac_cv_c_compiler_gnu - echo "$as_me:$LINENO: checking for egrep" >&5 - echo $ECHO_N "checking for egrep... $ECHO_C" >&6 - if test "${ac_cv_prog_egrep+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else - if echo a | (grep -E '(a|b)') >/dev/null 2>&1 - then ac_cv_prog_egrep='grep -E' - else ac_cv_prog_egrep='egrep' - fi - fi - echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 - echo "${ECHO_T}$ac_cv_prog_egrep" >&6 - EGREP=$ac_cv_prog_egrep - - echo "$as_me:$LINENO: checking for ANSI C header files" >&5 echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 if test "${ac_cv_header_stdc+set}" = set; then --- 2756,2761 ---- *************** *** 2837,2895 **** else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ #include #include #include #include - int - main () - { - - ; - return 0; - } _ACEOF ! rm -f conftest.$ac_objext ! if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ! (eval $ac_compile) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } && ! { ac_try='test -s conftest.$ac_objext' ! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ! (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; }; then ac_cv_header_stdc=yes else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ! ac_cv_header_stdc=no fi ! rm -f conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | ! $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no --- 2763,2810 ---- else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" #include #include #include #include _ACEOF ! if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 ! (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? + egrep -v '^ *\+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } >/dev/null; then ! if test -s conftest.err; then ! ac_cpp_err=$ac_c_preproc_warn_flag ! else ! ac_cpp_err= ! fi ! else ! ac_cpp_err=yes ! fi ! if test -z "$ac_cpp_err"; then ac_cv_header_stdc=yes else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! ac_cv_header_stdc=no fi ! rm -f conftest.err conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | ! egrep "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no *************** *** 2902,2917 **** # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | ! $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no --- 2817,2828 ---- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | ! egrep "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no *************** *** 2927,2944 **** else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else ! # define ISLOWER(c) \ ! (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) --- 2838,2850 ---- else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else ! # define ISLOWER(c) (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) *************** *** 2971,2982 **** else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ( exit $ac_status ) ac_cv_header_stdc=no fi ! rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi fi --- 2877,2887 ---- else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_header_stdc=no fi ! rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi fi *************** *** 3011,3021 **** else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ $ac_includes_default #include <$ac_header> --- 2916,2922 ---- else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" $ac_includes_default #include <$ac_header> *************** *** 3035,3042 **** eval "$as_ac_Header=yes" else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! eval "$as_ac_Header=no" fi rm -f conftest.$ac_objext conftest.$ac_ext --- 2936,2942 ---- eval "$as_ac_Header=yes" else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 eval "$as_ac_Header=no" fi rm -f conftest.$ac_objext conftest.$ac_ext *************** *** 3072,3082 **** echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF --- 2972,2978 ---- echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" $ac_includes_default #include <$ac_header> _ACEOF *************** *** 3095,3102 **** ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ac_header_compiler=no fi rm -f conftest.$ac_objext conftest.$ac_ext --- 2991,2997 ---- ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.$ac_objext conftest.$ac_ext *************** *** 3108,3124 **** echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? ! grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 --- 3003,3015 ---- echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? ! egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 *************** *** 3135,3142 **** ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext --- 3026,3032 ---- ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext *************** *** 3149,3180 **** { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 ! echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} ! ( ! cat <<\_ASBOX ! ## ------------------------------------ ## ! ## Report this to bug-autoconf@gnu.org. ## ! ## ------------------------------------ ## ! _ASBOX ! ) | ! sed "s/^/$as_me: WARNING: /" >&2 ! ;; no:yes ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 ! echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} ! ( ! cat <<\_ASBOX ! ## ------------------------------------ ## ! ## Report this to bug-autoconf@gnu.org. ## ! ## ------------------------------------ ## ! _ASBOX ! ) | ! sed "s/^/$as_me: WARNING: /" >&2 ! ;; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 --- 3039,3052 ---- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 ! echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; no:yes ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 ! echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 *************** *** 3204,3215 **** else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ #include int main () { --- 3076,3089 ---- else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" #include + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif int main () { *************** *** 3233,3240 **** am_cv_val_LC_MESSAGES=yes else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! am_cv_val_LC_MESSAGES=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext --- 3107,3113 ---- am_cv_val_LC_MESSAGES=yes else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 am_cv_val_LC_MESSAGES=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext *************** *** 3272,3282 **** echo $ECHO_N "checking libintl.h usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ $ac_includes_default #include _ACEOF --- 3145,3151 ---- echo $ECHO_N "checking libintl.h usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" $ac_includes_default #include _ACEOF *************** *** 3295,3302 **** ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ac_header_compiler=no fi rm -f conftest.$ac_objext conftest.$ac_ext --- 3164,3170 ---- ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.$ac_objext conftest.$ac_ext *************** *** 3308,3324 **** echo $ECHO_N "checking libintl.h presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? ! grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 --- 3176,3188 ---- echo $ECHO_N "checking libintl.h presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? ! egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 *************** *** 3335,3342 **** ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext --- 3199,3205 ---- ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext *************** *** 3349,3380 **** { echo "$as_me:$LINENO: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the preprocessor's result" >&5 ! echo "$as_me: WARNING: libintl.h: proceeding with the preprocessor's result" >&2;} ! ( ! cat <<\_ASBOX ! ## ------------------------------------ ## ! ## Report this to bug-autoconf@gnu.org. ## ! ## ------------------------------------ ## ! _ASBOX ! ) | ! sed "s/^/$as_me: WARNING: /" >&2 ! ;; no:yes ) { echo "$as_me:$LINENO: WARNING: libintl.h: present but cannot be compiled" >&5 echo "$as_me: WARNING: libintl.h: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: libintl.h: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: libintl.h: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the preprocessor's result" >&5 ! echo "$as_me: WARNING: libintl.h: proceeding with the preprocessor's result" >&2;} ! ( ! cat <<\_ASBOX ! ## ------------------------------------ ## ! ## Report this to bug-autoconf@gnu.org. ## ! ## ------------------------------------ ## ! _ASBOX ! ) | ! sed "s/^/$as_me: WARNING: /" >&2 ! ;; esac echo "$as_me:$LINENO: checking for libintl.h" >&5 echo $ECHO_N "checking for libintl.h... $ECHO_C" >&6 --- 3212,3225 ---- { echo "$as_me:$LINENO: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the preprocessor's result" >&5 ! echo "$as_me: WARNING: libintl.h: proceeding with the preprocessor's result" >&2;};; no:yes ) { echo "$as_me:$LINENO: WARNING: libintl.h: present but cannot be compiled" >&5 echo "$as_me: WARNING: libintl.h: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: libintl.h: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: libintl.h: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the preprocessor's result" >&5 ! echo "$as_me: WARNING: libintl.h: proceeding with the preprocessor's result" >&2;};; esac echo "$as_me:$LINENO: checking for libintl.h" >&5 echo $ECHO_N "checking for libintl.h... $ECHO_C" >&6 *************** *** 3401,3414 **** else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ #include int main () { --- 3246,3261 ---- else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" #include + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif int main () { *************** *** 3432,3439 **** gt_cv_func_dgettext_libc=yes else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! gt_cv_func_dgettext_libc=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext --- 3279,3285 ---- gt_cv_func_dgettext_libc=yes else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 gt_cv_func_dgettext_libc=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext *************** *** 3454,3497 **** else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ /* System header to define __stub macros and hopefully few prototypes, ! which can conflict with char $ac_func (); below. ! Prefer to if __STDC__ is defined, since ! exists even on freestanding compilers. */ ! #ifdef __STDC__ ! # include ! #else ! # include ! #endif /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" - { #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else ! char (*f) () = $ac_func; ! #endif ! #ifdef __cplusplus ! } #endif - int - main () - { - return f != $ac_func; ; return 0; } --- 3300,3336 ---- else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, ! which can conflict with char $ac_func (); below. */ ! #include /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func (); + char (*f) (); + + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif + int + main () + { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else ! f = $ac_func; #endif ; return 0; } *************** *** 3511,3518 **** eval "$as_ac_var=yes" else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! eval "$as_ac_var=no" fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext --- 3350,3356 ---- eval "$as_ac_var=yes" else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext *************** *** 3544,3554 **** LIBS="-lintl $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus --- 3382,3388 ---- LIBS="-lintl $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus *************** *** 3557,3562 **** --- 3391,3402 ---- /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char bindtextdomain (); + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif int main () { *************** *** 3580,3587 **** ac_cv_lib_intl_bindtextdomain=yes else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ac_cv_lib_intl_bindtextdomain=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext --- 3420,3426 ---- ac_cv_lib_intl_bindtextdomain=yes else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ac_cv_lib_intl_bindtextdomain=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext *************** *** 3599,3609 **** LIBS="-lintl $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus --- 3438,3444 ---- LIBS="-lintl $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus *************** *** 3612,3617 **** --- 3447,3458 ---- /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char dgettext (); + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif int main () { *************** *** 3635,3642 **** ac_cv_lib_intl_dgettext=yes else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ac_cv_lib_intl_dgettext=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext --- 3476,3482 ---- ac_cv_lib_intl_dgettext=yes else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ac_cv_lib_intl_dgettext=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext *************** *** 3665,3675 **** LIBS="-lintl -liconv $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus --- 3505,3511 ---- LIBS="-lintl -liconv $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus *************** *** 3678,3683 **** --- 3514,3525 ---- /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char dcgettext (); + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif int main () { *************** *** 3701,3708 **** ac_cv_lib_intl_dcgettext=yes else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ac_cv_lib_intl_dcgettext=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext --- 3543,3549 ---- ac_cv_lib_intl_dcgettext=yes else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ac_cv_lib_intl_dcgettext=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext *************** *** 3739,3782 **** else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ /* System header to define __stub macros and hopefully few prototypes, ! which can conflict with char $ac_func (); below. ! Prefer to if __STDC__ is defined, since ! exists even on freestanding compilers. */ ! #ifdef __STDC__ ! # include ! #else ! # include ! #endif /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" - { #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else ! char (*f) () = $ac_func; ! #endif ! #ifdef __cplusplus ! } #endif - int - main () - { - return f != $ac_func; ; return 0; } --- 3580,3616 ---- else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, ! which can conflict with char $ac_func (); below. */ ! #include /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func (); + char (*f) (); + + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif + int + main () + { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else ! f = $ac_func; #endif ; return 0; } *************** *** 3796,3803 **** eval "$as_ac_var=yes" else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! eval "$as_ac_var=no" fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext --- 3630,3636 ---- eval "$as_ac_var=yes" else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext *************** *** 3886,3929 **** else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ /* System header to define __stub macros and hopefully few prototypes, ! which can conflict with char $ac_func (); below. ! Prefer to if __STDC__ is defined, since ! exists even on freestanding compilers. */ ! #ifdef __STDC__ ! # include ! #else ! # include ! #endif /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" - { #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else ! char (*f) () = $ac_func; ! #endif ! #ifdef __cplusplus ! } #endif - int - main () - { - return f != $ac_func; ; return 0; } --- 3719,3755 ---- else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, ! which can conflict with char $ac_func (); below. */ ! #include /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func (); + char (*f) (); + + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif + int + main () + { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else ! f = $ac_func; #endif ; return 0; } *************** *** 3943,3950 **** eval "$as_ac_var=yes" else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! eval "$as_ac_var=no" fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext --- 3769,3775 ---- eval "$as_ac_var=yes" else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext *************** *** 4037,4048 **** cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ int main () { --- 3862,3875 ---- cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif int main () { *************** *** 4068,4080 **** DATADIRNAME=share else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! CATOBJEXT=.mo DATADIRNAME=lib fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext INSTOBJEXT=.mo fi fi --- 3895,3908 ---- DATADIRNAME=share else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 CATOBJEXT=.mo DATADIRNAME=lib fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext INSTOBJEXT=.mo + else + gt_cv_have_gettext=no fi fi *************** *** 4103,4109 **** # We need to process the po/ directory. POSUB=po ! ac_config_commands="$ac_config_commands default-3" for lang in $ALL_LINGUAS; do --- 3931,3937 ---- # We need to process the po/ directory. POSUB=po ! ac_config_commands="$ac_config_commands default-3" for lang in $ALL_LINGUAS; do *************** *** 4169,4175 **** < $srcdir/po/POTFILES.in > po/POTFILES ! ac_config_files="$ac_config_files Makefile gnome-mime-data.spec icons/Makefile man/Makefile man/gnome-vfs-mime.5 po/Makefile.in gnome-mime-data-2.0.pc" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure --- 3997,4003 ---- < $srcdir/po/POTFILES.in > po/POTFILES ! ac_config_files="$ac_config_files Makefile gnome-mime-data.spec icons/Makefile man/Makefile man/gnome-vfs-mime.5 po/Makefile.in gnome-mime-data-2.0.pc" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure *************** *** 4180,4186 **** # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # ! # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. --- 4008,4014 ---- # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # ! # `ac_cv_env_foo' variables (set or unset) will be overriden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. *************** *** 4215,4221 **** t end /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ : end' >>confcache ! if diff $cache_file confcache >/dev/null 2>&1; then :; else if test -w $cache_file; then test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" cat confcache >$cache_file --- 4043,4049 ---- t end /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ : end' >>confcache ! if cmp -s $cache_file confcache; then :; else if test -w $cache_file; then test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" cat confcache >$cache_file *************** *** 4246,4266 **** DEFS=-DHAVE_CONFIG_H - ac_libobjs= - ac_ltlibobjs= - for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_i=`echo "$ac_i" | - sed 's/\$U\././;s/\.o$//;s/\.obj$//'` - # 2. Add them. - ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" - ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' - done - LIBOBJS=$ac_libobjs - - LTLIBOBJS=$ac_ltlibobjs - - mv -f po/POTFILES po/POTFILES.tmp --- 4074,4079 ---- *************** *** 4282,4293 **** # configure, is in config.log if it exists. debug=false - ac_cs_recheck=false - ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## --- 4095,4105 ---- # configure, is in config.log if it exists. debug=false SHELL=\${CONFIG_SHELL-$SHELL} _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF + ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## *************** *** 4296,4308 **** if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi # Support unset when possible. if (FOO=FOO; unset FOO) >/dev/null 2>&1; then as_unset=unset --- 4108,4118 ---- if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi + # NLS nuisances. # Support unset when possible. if (FOO=FOO; unset FOO) >/dev/null 2>&1; then as_unset=unset *************** *** 4310,4351 **** as_unset=false fi ! ! # Work around bugs in pre-3.0 UWIN ksh. ! $as_unset ENV MAIL MAILPATH ! PS1='$ ' ! PS2='> ' ! PS4='+ ' ! ! # NLS nuisances. ! for as_var in \ ! LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ ! LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ ! LC_TELEPHONE LC_TIME ! do ! if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then ! eval $as_var=C; export $as_var ! else ! $as_unset $as_var ! fi ! done ! ! # Required to use basename. ! if expr a : '\(a\)' >/dev/null 2>&1; then ! as_expr=expr ! else ! as_expr=false ! fi ! ! if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then ! as_basename=basename ! else ! as_basename=false ! fi # Name of the executable. ! as_me=`$as_basename "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ --- 4120,4153 ---- as_unset=false fi ! (set +x; test -n "`(LANG=C; export LANG) 2>&1`") && ! { $as_unset LANG || test "${LANG+set}" != set; } || ! { LANG=C; export LANG; } ! (set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") && ! { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } || ! { LC_ALL=C; export LC_ALL; } ! (set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") && ! { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } || ! { LC_TIME=C; export LC_TIME; } ! (set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") && ! { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } || ! { LC_CTYPE=C; export LC_CTYPE; } ! (set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") && ! { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } || ! { LANGUAGE=C; export LANGUAGE; } ! (set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") && ! { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } || ! { LC_COLLATE=C; export LC_COLLATE; } ! (set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") && ! { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } || ! { LC_NUMERIC=C; export LC_NUMERIC; } ! (set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") && ! { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } || ! { LC_MESSAGES=C; export LC_MESSAGES; } # Name of the executable. ! as_me=`(basename "$0") 2>/dev/null || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ *************** *** 4356,4362 **** /^X\/\(\/\).*/{ s//\1/; q; } s/.*/./; q'` - # PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' --- 4158,4163 ---- *************** *** 4367,4381 **** # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then ! echo "#! /bin/sh" >conf$$.sh ! echo "exit 0" >>conf$$.sh ! chmod +x conf$$.sh ! if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi ! rm -f conf$$.sh fi --- 4168,4182 ---- # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then ! echo "#! /bin/sh" >conftest.sh ! echo "exit 0" >>conftest.sh ! chmod +x conftest.sh ! if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi ! rm -f conftest.sh fi *************** *** 4424,4431 **** as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } CONFIG_SHELL=$as_dir/$as_base export CONFIG_SHELL exec "$CONFIG_SHELL" "$0" ${1+"$@"} --- 4225,4230 ---- *************** *** 4499,4510 **** fi rm -f conf$$ conf$$.exe conf$$.file - if mkdir -p . 2>/dev/null; then - as_mkdir_p=: - else - as_mkdir_p=false - fi - as_executable_p="test -f" # Sed expression to map a string onto a valid CPP name. --- 4298,4303 ---- *************** *** 4521,4527 **** IFS=" $as_nl" # CDPATH. ! $as_unset CDPATH exec 6>&1 --- 4314,4320 ---- IFS=" $as_nl" # CDPATH. ! $as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; } exec 6>&1 *************** *** 4538,4544 **** cat >&5 <<_CSEOF This file was extended by $as_me, which was ! generated by GNU Autoconf 2.57. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS --- 4331,4337 ---- cat >&5 <<_CSEOF This file was extended by $as_me, which was ! generated by GNU Autoconf 2.53. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS *************** *** 4578,4584 **** -h, --help print this help, then exit -V, --version print version number, then exit - -q, --quiet do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] --- 4371,4376 ---- *************** *** 4601,4607 **** cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\\ config.status ! configured by $0, generated by GNU Autoconf 2.57, with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 --- 4393,4399 ---- cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\\ config.status ! configured by $0, generated by GNU Autoconf 2.53, with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 *************** *** 4622,4646 **** --*=*) ac_option=`expr "x$1" : 'x\([^=]*\)='` ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` ! ac_shift=: ! ;; ! -*) ! ac_option=$1 ! ac_optarg=$2 ! ac_shift=shift ;; *) # This is not an option, so the user has probably given explicit # arguments. - ac_option=$1 ac_need_defaults=false;; esac ! case $ac_option in # Handling of the options. _ACEOF ! cat >>$CONFIG_STATUS <<\_ACEOF -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ! ac_cs_recheck=: ;; --version | --vers* | -V ) echo "$ac_cs_version"; exit 0 ;; --he | --h) --- 4414,4438 ---- --*=*) ac_option=`expr "x$1" : 'x\([^=]*\)='` ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` ! shift ! set dummy "$ac_option" "$ac_optarg" ${1+"$@"} ! shift ;; + -*);; *) # This is not an option, so the user has probably given explicit # arguments. ac_need_defaults=false;; esac ! case $1 in # Handling of the options. _ACEOF ! cat >>$CONFIG_STATUS <<_ACEOF -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ! echo "running $SHELL $0 " $ac_configure_args " --no-create --no-recursion" ! exec $SHELL $0 $ac_configure_args --no-create --no-recursion ;; ! _ACEOF ! cat >>$CONFIG_STATUS <<\_ACEOF --version | --vers* | -V ) echo "$ac_cs_version"; exit 0 ;; --he | --h) *************** *** 4655,4670 **** --debug | --d* | -d ) debug=: ;; --file | --fil | --fi | --f ) ! $ac_shift ! CONFIG_FILES="$CONFIG_FILES $ac_optarg" ac_need_defaults=false;; --header | --heade | --head | --hea ) ! $ac_shift ! CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" ac_need_defaults=false;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; # This is an error. -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 --- 4447,4459 ---- --debug | --d* | -d ) debug=: ;; --file | --fil | --fi | --f ) ! shift ! CONFIG_FILES="$CONFIG_FILES $1" ac_need_defaults=false;; --header | --heade | --head | --hea ) ! shift ! CONFIG_HEADERS="$CONFIG_HEADERS $1" ac_need_defaults=false;; # This is an error. -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 *************** *** 4679,4698 **** shift done - ac_configure_extra_args= - - if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" - fi - - _ACEOF - cat >>$CONFIG_STATUS <<_ACEOF - if \$ac_cs_recheck; then - echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 - exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - fi - _ACEOF cat >>$CONFIG_STATUS <<_ACEOF --- 4468,4473 ---- *************** *** 4700,4707 **** # INIT-COMMANDS section. # - INTLTOOL_PERL=${INTLTOOL_PERL} _ACEOF --- 4475,4483 ---- # INIT-COMMANDS section. # INTLTOOL_PERL=${INTLTOOL_PERL} + AMDEP_TRUE="$AMDEP_TRUE" + ac_aux_dir="$ac_aux_dir" _ACEOF *************** *** 4740,4748 **** test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi - # Have a temporary directory for convenience. Make it in the build tree - # simply because there is no reason to put it here, and in addition, - # creating and moving files from /tmp can sometimes cause problems. # Create a temporary directory, and hook for its removal unless debugging. $debug || { --- 4516,4521 ---- *************** *** 4751,4767 **** } # Create a (secure) tmp directory for tmp files. ! { ! tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { ! tmp=./confstat$$-$RANDOM (umask 077 && mkdir $tmp) } || { ! echo "$me: cannot create a temporary directory in ." >&2 { (exit 1); exit 1; } } --- 4524,4540 ---- } # Create a (secure) tmp directory for tmp files. ! : ${TMPDIR=/tmp} { ! tmp=`(umask 077 && mktemp -d -q "$TMPDIR/csXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { ! tmp=$TMPDIR/cs$$-$RANDOM (umask 077 && mkdir $tmp) } || { ! echo "$me: cannot create a temporary directory in $TMPDIR" >&2 { (exit 1); exit 1; } } *************** *** 4814,4825 **** --- 4587,4608 ---- s,@INSTALL_DATA@,$INSTALL_DATA,;t t s,@PACKAGE@,$PACKAGE,;t t s,@VERSION@,$VERSION,;t t + s,@EXEEXT@,$EXEEXT,;t t + s,@OBJEXT@,$OBJEXT,;t t s,@ACLOCAL@,$ACLOCAL,;t t s,@AUTOCONF@,$AUTOCONF,;t t s,@AUTOMAKE@,$AUTOMAKE,;t t s,@AUTOHEADER@,$AUTOHEADER,;t t s,@MAKEINFO@,$MAKEINFO,;t t + s,@AMTAR@,$AMTAR,;t t + s,@install_sh@,$install_sh,;t t + s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t + s,@AWK@,$AWK,;t t s,@SET_MAKE@,$SET_MAKE,;t t + s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t + s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t + s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t + s,@DEPDIR@,$DEPDIR,;t t s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t s,@MAINT@,$MAINT,;t t *************** *** 4847,4856 **** s,@LDFLAGS@,$LDFLAGS,;t t s,@CPPFLAGS@,$CPPFLAGS,;t t s,@ac_ct_CC@,$ac_ct_CC,;t t ! s,@EXEEXT@,$EXEEXT,;t t ! s,@OBJEXT@,$OBJEXT,;t t s,@CPP@,$CPP,;t t - s,@EGREP@,$EGREP,;t t s,@USE_NLS@,$USE_NLS,;t t s,@MSGFMT@,$MSGFMT,;t t s,@GMSGFMT@,$GMSGFMT,;t t --- 4630,4639 ---- s,@LDFLAGS@,$LDFLAGS,;t t s,@CPPFLAGS@,$CPPFLAGS,;t t s,@ac_ct_CC@,$ac_ct_CC,;t t ! s,@am__include@,$am__include,;t t ! s,@am__quote@,$am__quote,;t t ! s,@CCDEPMODE@,$CCDEPMODE,;t t s,@CPP@,$CPP,;t t s,@USE_NLS@,$USE_NLS,;t t s,@MSGFMT@,$MSGFMT,;t t s,@GMSGFMT@,$GMSGFMT,;t t *************** *** 4866,4873 **** s,@POFILES@,$POFILES,;t t s,@POSUB@,$POSUB,;t t s,@MKINSTALLDIRS@,$MKINSTALLDIRS,;t t - s,@LIBOBJS@,$LIBOBJS,;t t - s,@LTLIBOBJS@,$LTLIBOBJS,;t t CEOF _ACEOF --- 4649,4654 ---- *************** *** 4938,4967 **** /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` ! { if $as_mkdir_p; then ! mkdir -p "$ac_dir" ! else ! as_dir="$ac_dir" ! as_dirs= ! while test ! -d "$as_dir"; do ! as_dirs="$as_dir $as_dirs" ! as_dir=`(dirname "$as_dir") 2>/dev/null || ! $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ! X"$as_dir" : 'X\(//\)[^/]' \| \ ! X"$as_dir" : 'X\(//\)$' \| \ ! X"$as_dir" : 'X\(/\)' \| \ ! . : '\(.\)' 2>/dev/null || ! echo X"$as_dir" | ! sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } ! /^X\(\/\/\)[^/].*/{ s//\1/; q; } ! /^X\(\/\/\)$/{ s//\1/; q; } ! /^X\(\/\).*/{ s//\1/; q; } ! s/.*/./; q'` ! done ! test ! -n "$as_dirs" || mkdir $as_dirs ! fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 ! echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} ! { (exit 1); exit 1; }; }; } ac_builddir=. --- 4719,4743 ---- /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` ! { case "$ac_dir" in ! [\\/]* | ?:[\\/]* ) as_incr_dir=;; ! *) as_incr_dir=.;; ! esac ! as_dummy="$ac_dir" ! for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do ! case $as_mkdir_dir in ! # Skip DOS drivespec ! ?:) as_incr_dir=$as_mkdir_dir ;; ! *) ! as_incr_dir=$as_incr_dir/$as_mkdir_dir ! test -d "$as_incr_dir" || ! mkdir "$as_incr_dir" || ! { { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5 ! echo "$as_me: error: cannot create \"$ac_dir\"" >&2;} ! { (exit 1); exit 1; }; } ! ;; ! esac ! done; } ac_builddir=. *************** *** 4991,4997 **** # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be # absolute. ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` ! ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` --- 4767,4773 ---- # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be # absolute. ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` ! ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd` ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` *************** *** 5181,5187 **** # Break up conftest.defines because some shells have a limit on the size # of here documents, and old seds have small limits too (100 cmds). echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS ! echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS echo ' :' >>$CONFIG_STATUS rm -f conftest.tail --- 4957,4963 ---- # Break up conftest.defines because some shells have a limit on the size # of here documents, and old seds have small limits too (100 cmds). echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS ! echo ' if egrep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS echo ' :' >>$CONFIG_STATUS rm -f conftest.tail *************** *** 5205,5211 **** mv conftest.tail conftest.defines done rm -f conftest.defines ! echo ' fi # grep' >>$CONFIG_STATUS echo >>$CONFIG_STATUS # Break up conftest.undefs because some shells have a limit on the size --- 4981,4987 ---- mv conftest.tail conftest.defines done rm -f conftest.defines ! echo ' fi # egrep' >>$CONFIG_STATUS echo >>$CONFIG_STATUS # Break up conftest.undefs because some shells have a limit on the size *************** *** 5245,5251 **** cat $tmp/in >>$tmp/config.h rm -f $tmp/in if test x"$ac_file" != x-; then ! if diff $ac_file $tmp/config.h >/dev/null 2>&1; then { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 echo "$as_me: $ac_file is unchanged" >&6;} else --- 5021,5027 ---- cat $tmp/in >>$tmp/config.h rm -f $tmp/in if test x"$ac_file" != x-; then ! if cmp -s $ac_file $tmp/config.h 2>/dev/null; then { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 echo "$as_me: $ac_file is unchanged" >&6;} else *************** *** 5261,5290 **** /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` ! { if $as_mkdir_p; then ! mkdir -p "$ac_dir" ! else ! as_dir="$ac_dir" ! as_dirs= ! while test ! -d "$as_dir"; do ! as_dirs="$as_dir $as_dirs" ! as_dir=`(dirname "$as_dir") 2>/dev/null || ! $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ! X"$as_dir" : 'X\(//\)[^/]' \| \ ! X"$as_dir" : 'X\(//\)$' \| \ ! X"$as_dir" : 'X\(/\)' \| \ ! . : '\(.\)' 2>/dev/null || ! echo X"$as_dir" | ! sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } ! /^X\(\/\/\)[^/].*/{ s//\1/; q; } ! /^X\(\/\/\)$/{ s//\1/; q; } ! /^X\(\/\).*/{ s//\1/; q; } ! s/.*/./; q'` ! done ! test ! -n "$as_dirs" || mkdir $as_dirs ! fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 ! echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} ! { (exit 1); exit 1; }; }; } rm -f $ac_file mv $tmp/config.h $ac_file --- 5037,5061 ---- /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` ! { case "$ac_dir" in ! [\\/]* | ?:[\\/]* ) as_incr_dir=;; ! *) as_incr_dir=.;; ! esac ! as_dummy="$ac_dir" ! for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do ! case $as_mkdir_dir in ! # Skip DOS drivespec ! ?:) as_incr_dir=$as_mkdir_dir ;; ! *) ! as_incr_dir=$as_incr_dir/$as_mkdir_dir ! test -d "$as_incr_dir" || ! mkdir "$as_incr_dir" || ! { { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5 ! echo "$as_me: error: cannot create \"$ac_dir\"" >&2;} ! { (exit 1); exit 1; }; } ! ;; ! esac ! done; } rm -f $ac_file mv $tmp/config.h $ac_file *************** *** 5293,5298 **** --- 5064,5075 ---- cat $tmp/config.h rm -f $tmp/config.h fi + # Run the commands associated with the file. + case $ac_file in + config.h ) # update the timestamp + echo timestamp >"./stamp-h1" + ;; + esac done _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF *************** *** 5343,5349 **** # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be # absolute. ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` ! ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` --- 5120,5126 ---- # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be # absolute. ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` ! ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd` ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` *************** *** 5351,5358 **** { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 echo "$as_me: executing $ac_dest commands" >&6;} case $ac_dest in ! default-1 ) test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h ;; ! default-2 ) sed -e "s:@INTLTOOL_PERL@:${INTLTOOL_PERL}:;" < ${srcdir}/intltool-extract.in > intltool-extract.out if cmp -s intltool-extract intltool-extract.out 2>/dev/null; then --- 5128,5134 ---- { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 echo "$as_me: executing $ac_dest commands" >&6;} case $ac_dest in ! default-1 ) sed -e "s:@INTLTOOL_PERL@:${INTLTOOL_PERL}:;" < ${srcdir}/intltool-extract.in > intltool-extract.out if cmp -s intltool-extract intltool-extract.out 2>/dev/null; then *************** *** 5382,5387 **** --- 5158,5202 ---- chmod u+w intltool-update ;; + default-2 ) + test x"$AMDEP_TRUE" != x"" || + for mf in $CONFIG_FILES; do + case "$mf" in + Makefile) dirpart=.;; + */Makefile) dirpart=`echo "$mf" | sed -e 's|/[^/]*$||'`;; + *) continue;; + esac + grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue + # Extract the definition of DEP_FILES from the Makefile without + # running `make'. + DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"` + test -z "$DEPDIR" && continue + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n -e '/^U = / s///p' < "$mf"` + test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" + # We invoke sed twice because it is the simplest approach to + # changing $(DEPDIR) to its actual value in the expansion. + for file in `sed -n -e ' + /^DEP_FILES = .*\\\\$/ { + s/^DEP_FILES = // + :loop + s/\\\\$// + p + n + /\\\\$/ b loop + p + } + /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`echo "$file" | sed -e 's|/[^/]*$||'` + $ac_aux_dir/mkinstalldirs "$dirpart/$fdir" > /dev/null 2>&1 + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done + ;; default-3 ) case "$CONFIG_FILES" in *po/Makefile.in*) sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile esac ;; *************** *** 5407,5417 **** # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null ! $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. --- 5222,5229 ---- # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: exec 5>/dev/null ! $SHELL $CONFIG_STATUS || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. diff -crN ./gnome-mime-data/icons/Makefile.in /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./gnome-mime-data/icons/Makefile.in *** ./gnome-mime-data/icons/Makefile.in Tue Feb 4 10:07:07 2003 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./gnome-mime-data/icons/Makefile.in Sat Aug 9 21:17:42 2003 *************** *** 1,6 **** ! # Makefile.in generated automatically by automake 1.4-p6 from Makefile.am ! # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. --- 1,7 ---- ! # Makefile.in generated automatically by automake 1.5 from Makefile.am. ! # Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 ! # Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. *************** *** 10,15 **** --- 11,17 ---- # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. + @SET_MAKE@ SHELL = @SHELL@ *************** *** 31,43 **** mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include - - DESTDIR = - pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ - top_builddir = .. ACLOCAL = @ACLOCAL@ --- 33,41 ---- *************** *** 46,69 **** AUTOHEADER = @AUTOHEADER@ INSTALL = @INSTALL@ ! INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ transform = @program_transform_name@ - NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ DATADIRNAME = @DATADIRNAME@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ --- 44,72 ---- AUTOHEADER = @AUTOHEADER@ INSTALL = @INSTALL@ ! INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ + INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : + AMTAR = @AMTAR@ + AWK = @AWK@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ DATADIRNAME = @DATADIRNAME@ + DEPDIR = @DEPDIR@ + EXEEXT = @EXEEXT@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ *************** *** 85,92 **** INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ MKINSTALLDIRS = @MKINSTALLDIRS@ PACKAGE = @PACKAGE@ POFILES = @POFILES@ POSUB = @POSUB@ --- 88,95 ---- INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ MAINT = @MAINT@ MKINSTALLDIRS = @MKINSTALLDIRS@ + OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ POFILES = @POFILES@ POSUB = @POSUB@ *************** *** 94,228 **** PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ NULL = icondir = $(datadir)/pixmaps/document-icons/ ! icon_DATA = gnome-application-encapsulated_postscript.png gnome-application-msword.png gnome-application-pdf.png gnome-application-pgp.png gnome-application-pgp-encrypted.png gnome-application-pgp-keys.png gnome-application-postscript.png gnome-application-qif.png gnome-application-rtf.png gnome-application-smil.png gnome-application-vnd.lotus-1-2-3.png gnome-application-vnd.ms-excel.png gnome-application-vnd.ms-powerpoint.png gnome-application-vnd.rn-realmedia.png gnome-application-vnd.stardivision.calc.png gnome-application-vnd.stardivision.writer.png gnome-application-vnd.stardivision.impress.png gnome-application-vnd.sun.xml.calc.png gnome-application-vnd.sun.xml.impress.png gnome-application-vnd.sun.xml.writer.png gnome-application-x-abiword.png gnome-application-x-applix-spreadsheet.png gnome-application-x-applix-word.png gnome-application-x-arj.png gnome-application-x-backup.png gnome-application-x-blender.png gnome-application-x-bzip.png gnome-application-x-compress.png gnome-application-x-dc-rom.png gnome-application-x-deb.png gnome-application-x-dia-diagram.png gnome-application-x-dvi.png gnome-application-x-e-theme.png gnome-application-x-flac.png gnome-application-x-font-sunos-news.png gnome-application-x-gameboy-rom.png gnome-application-x-genesis-rom.png gnome-application-x-gnome-app-info.png gnome-application-x-gnumeric.png gnome-application-x-gtktalog.png gnome-application-x-gzip.png gnome-application-x-jar.png gnome-application-x-java-byte-code.png gnome-application-x-kde-app-info.png gnome-application-x-killustrator.png gnome-application-x-kpresenter.png gnome-application-x-kspread.png gnome-application-x-kword.png gnome-application-x-msx-rom.png gnome-application-x-n64-rom.png gnome-application-x-nes-rom.png gnome-application-x-ogg.png gnome-application-x-php.png gnome-application-x-python-bytecode.png gnome-application-x-rpm.png gnome-application-x-reject.png gnome-application-x-scheme-source.png gnome-application-x-sms-rom.png gnome-application-x-sql.png gnome-application-x-stuffit.png gnome-audio-ac3.png gnome-audio-basic.png gnome-audio-midi.png gnome-audio-mpeg.png gnome-audio-ulaw.png gnome-audio-x-aiff.png gnome-audio-x-bmx.png gnome-audio-x-it.png gnome-audio-x-mod.png gnome-audio-x-pn-realaudio.png gnome-audio-x-s3m.png gnome-audio-x-stm.png gnome-audio-x-voc.png gnome-audio-x-wav.png gnome-audio-x-xi.png gnome-audio-x-xm.png gnome-audio.png gnome-compressed.png gnome-font-afm.png gnome-font-bdf.png gnome-font-linux-psf.png gnome-font-ttf.png gnome-font-x-pcf.png gnome-http-url.png gnome-image-bmp.png gnome-image-generic.png gnome-image-gif.png gnome-image-ief.png gnome-image-jpeg.png gnome-image-pbm.png gnome-image-pgm.png gnome-image-png.png gnome-image-pnm.png gnome-image-ppm.png gnome-image-psd.png gnome-image-ras.png gnome-image-rgb.png gnome-image-svg.png gnome-image-tga.png gnome-image-tiff.png gnome-image-x-3ds.png gnome-image-x-applix-graphic.png gnome-image-x-lwo.png gnome-image-x-lws.png gnome-image-x-xfig.png gnome-image-xbm.png gnome-image-xcf.png gnome-image-xpm.png gnome-image-xwd.png gnome-library.png gnome-objectfile.png gnome-package.png gnome-tex.png gnome-text-abiword.png gnome-text-css.png gnome-text-html.png gnome-text-x-authors.png gnome-text-x-c.png gnome-text-x-c-header.png gnome-text-x-c++.png gnome-text-x-csh.png gnome-text-x-copying.png gnome-text-x-credits.png gnome-text-x-haskell.png gnome-text-x-install.png gnome-text-x-java.png gnome-text-x-literate-haskell.png gnome-text-x-lyx.png gnome-text-x-makefile.png gnome-text-x-patch.png gnome-text-x-perl.png gnome-text-x-python.png gnome-text-x-readme.png gnome-text-x-sh.png gnome-text-x-sql.png gnome-text-x-zsh.png gnome-text-xml.png gnome-textfile.png gnome-video-mpeg.png gnome-video-quicktime.png gnome-video-x-ms-asf.png gnome-video-x-msvideo.png gnome-video-x-ms-wmv.png gnome-x-font-afm.png gnome-x-troff-man.png i-blockdev.png i-cdrom.png i-cdrom-audio.png i-chardev.png i-core.png i-dvd.png i-executable.png i-fifo.png i-floppy.png i-ftp.png i-harddisk.png i-manual.png i-music-12.png i-music-24.png i-music-36.png i-music.png i-nfs.png i-network.png i-printer.png i-regular-72.png i-regular-96.png i-regular.png i-regular.xml i-smb.png i-sock.png i-spreadsheet.png i-zipdisk.png i-web.png $(NULL) EXTRA_DIST = $(icon_DATA) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs ! CONFIG_HEADER = ../config.h ! CONFIG_CLEAN_FILES = ! DATA = $(icon_DATA) ! ! DIST_COMMON = Makefile.am Makefile.in - DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) - - TAR = gtar - GZIP_ENV = --best - all: all-redirect .SUFFIXES: ! $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) ! cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps icons/Makefile ! ! Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status ! cd $(top_builddir) \ ! && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status ! ! install-iconDATA: $(icon_DATA) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(icondir) @list='$(icon_DATA)'; for p in $$list; do \ ! if test -f $(srcdir)/$$p; then \ ! echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(icondir)/$$p"; \ ! $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(icondir)/$$p; \ ! else if test -f $$p; then \ ! echo " $(INSTALL_DATA) $$p $(DESTDIR)$(icondir)/$$p"; \ ! $(INSTALL_DATA) $$p $(DESTDIR)$(icondir)/$$p; \ ! fi; fi; \ done uninstall-iconDATA: @$(NORMAL_UNINSTALL) ! list='$(icon_DATA)'; for p in $$list; do \ ! rm -f $(DESTDIR)$(icondir)/$$p; \ done tags: TAGS TAGS: ! distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) ! subdir = icons distdir: $(DISTFILES) @for file in $(DISTFILES); do \ ! d=$(srcdir); \ if test -d $$d/$$file; then \ ! cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ ! || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ ! || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done - info-am: - info: info-am - dvi-am: - dvi: dvi-am check-am: all-am check: check-am ! installcheck-am: ! installcheck: installcheck-am ! install-exec-am: ! install-exec: install-exec-am ! install-data-am: install-iconDATA ! install-data: install-data-am - install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am install: install-am ! uninstall-am: uninstall-iconDATA uninstall: uninstall-am - all-am: Makefile $(DATA) - all-redirect: all-am - install-strip: - $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install - installdirs: - $(mkinstalldirs) $(DESTDIR)$(icondir) mostlyclean-generic: clean-generic: distclean-generic: ! -rm -f Makefile $(CONFIG_CLEAN_FILES) ! -rm -f config.cache config.log stamp-h stamp-h[0-9]* maintainer-clean-generic: ! mostlyclean-am: mostlyclean-generic ! mostlyclean: mostlyclean-am ! clean-am: clean-generic mostlyclean-am ! clean: clean-am ! distclean-am: distclean-generic clean-am ! distclean: distclean-am ! maintainer-clean-am: maintainer-clean-generic distclean-am ! @echo "This command is intended for maintainers to use;" ! @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-am ! .PHONY: uninstall-iconDATA install-iconDATA tags distdir info-am info \ ! dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ ! install-exec install-data-am install-data install-am install \ ! uninstall-am uninstall all-redirect all-am all installdirs \ ! mostlyclean-generic distclean-generic clean-generic \ ! maintainer-clean-generic clean mostlyclean distclean maintainer-clean # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. --- 97,424 ---- PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ + am__include = @am__include@ + am__quote = @am__quote@ + install_sh = @install_sh@ NULL = icondir = $(datadir)/pixmaps/document-icons/ ! icon_DATA = \ ! gnome-application-encapsulated_postscript.png \ ! gnome-application-msword.png \ ! gnome-application-pdf.png \ ! gnome-application-pgp.png \ ! gnome-application-pgp-encrypted.png \ ! gnome-application-pgp-keys.png \ ! gnome-application-postscript.png \ ! gnome-application-qif.png \ ! gnome-application-rtf.png \ ! gnome-application-smil.png \ ! gnome-application-vnd.lotus-1-2-3.png \ ! gnome-application-vnd.ms-excel.png \ ! gnome-application-vnd.ms-powerpoint.png \ ! gnome-application-vnd.rn-realmedia.png \ ! gnome-application-vnd.stardivision.calc.png \ ! gnome-application-vnd.stardivision.writer.png \ ! gnome-application-vnd.stardivision.impress.png \ ! gnome-application-vnd.sun.xml.calc.png \ ! gnome-application-vnd.sun.xml.impress.png \ ! gnome-application-vnd.sun.xml.writer.png \ ! gnome-application-x-abiword.png \ ! gnome-application-x-applix-spreadsheet.png \ ! gnome-application-x-applix-word.png \ ! gnome-application-x-arj.png \ ! gnome-application-x-backup.png \ ! gnome-application-x-blender.png \ ! gnome-application-x-bzip.png \ ! gnome-application-x-compress.png \ ! gnome-application-x-dc-rom.png \ ! gnome-application-x-deb.png \ ! gnome-application-x-dia-diagram.png \ ! gnome-application-x-dvi.png \ ! gnome-application-x-e-theme.png \ ! gnome-application-x-flac.png \ ! gnome-application-x-font-sunos-news.png \ ! gnome-application-x-gameboy-rom.png \ ! gnome-application-x-genesis-rom.png \ ! gnome-application-x-gnome-app-info.png \ ! gnome-application-x-gnumeric.png \ ! gnome-application-x-gtktalog.png \ ! gnome-application-x-gzip.png \ ! gnome-application-x-jar.png \ ! gnome-application-x-java-byte-code.png \ ! gnome-application-x-kde-app-info.png \ ! gnome-application-x-killustrator.png \ ! gnome-application-x-kpresenter.png \ ! gnome-application-x-kspread.png \ ! gnome-application-x-kword.png \ ! gnome-application-x-msx-rom.png \ ! gnome-application-x-n64-rom.png \ ! gnome-application-x-nes-rom.png \ ! gnome-application-x-ogg.png \ ! gnome-application-x-php.png \ ! gnome-application-x-python-bytecode.png \ ! gnome-application-x-rpm.png \ ! gnome-application-x-reject.png \ ! gnome-application-x-scheme-source.png \ ! gnome-application-x-sms-rom.png \ ! gnome-application-x-sql.png \ ! gnome-application-x-stuffit.png \ ! gnome-audio-ac3.png \ ! gnome-audio-basic.png \ ! gnome-audio-midi.png \ ! gnome-audio-mpeg.png \ ! gnome-audio-ulaw.png \ ! gnome-audio-x-aiff.png \ ! gnome-audio-x-bmx.png \ ! gnome-audio-x-it.png \ ! gnome-audio-x-mod.png \ ! gnome-audio-x-pn-realaudio.png \ ! gnome-audio-x-s3m.png \ ! gnome-audio-x-stm.png \ ! gnome-audio-x-voc.png \ ! gnome-audio-x-wav.png \ ! gnome-audio-x-xi.png \ ! gnome-audio-x-xm.png \ ! gnome-audio.png \ ! gnome-compressed.png \ ! gnome-font-afm.png \ ! gnome-font-bdf.png \ ! gnome-font-linux-psf.png \ ! gnome-font-ttf.png \ ! gnome-font-x-pcf.png \ ! gnome-http-url.png \ ! gnome-image-bmp.png \ ! gnome-image-generic.png \ ! gnome-image-gif.png \ ! gnome-image-ief.png \ ! gnome-image-jpeg.png \ ! gnome-image-pbm.png \ ! gnome-image-pgm.png \ ! gnome-image-png.png \ ! gnome-image-pnm.png \ ! gnome-image-ppm.png \ ! gnome-image-psd.png \ ! gnome-image-ras.png \ ! gnome-image-rgb.png \ ! gnome-image-svg.png \ ! gnome-image-tga.png \ ! gnome-image-tiff.png \ ! gnome-image-x-3ds.png \ ! gnome-image-x-applix-graphic.png \ ! gnome-image-x-lwo.png \ ! gnome-image-x-lws.png \ ! gnome-image-x-xfig.png \ ! gnome-image-xbm.png \ ! gnome-image-xcf.png \ ! gnome-image-xpm.png \ ! gnome-image-xwd.png \ ! gnome-library.png \ ! gnome-objectfile.png \ ! gnome-package.png \ ! gnome-tex.png \ ! gnome-text-abiword.png \ ! gnome-text-css.png \ ! gnome-text-html.png \ ! gnome-text-x-authors.png \ ! gnome-text-x-c.png \ ! gnome-text-x-c-header.png \ ! gnome-text-x-c++.png \ ! gnome-text-x-csh.png \ ! gnome-text-x-copying.png \ ! gnome-text-x-credits.png \ ! gnome-text-x-haskell.png \ ! gnome-text-x-install.png \ ! gnome-text-x-java.png \ ! gnome-text-x-literate-haskell.png \ ! gnome-text-x-lyx.png \ ! gnome-text-x-makefile.png \ ! gnome-text-x-patch.png \ ! gnome-text-x-perl.png \ ! gnome-text-x-python.png \ ! gnome-text-x-readme.png \ ! gnome-text-x-sh.png \ ! gnome-text-x-sql.png \ ! gnome-text-x-zsh.png \ ! gnome-text-xml.png \ ! gnome-textfile.png \ ! gnome-video-mpeg.png \ ! gnome-video-quicktime.png \ ! gnome-video-x-ms-asf.png \ ! gnome-video-x-msvideo.png \ ! gnome-video-x-ms-wmv.png \ ! gnome-x-font-afm.png \ ! gnome-x-troff-man.png \ ! i-blockdev.png \ ! i-cdrom.png \ ! i-cdrom-audio.png \ ! i-chardev.png \ ! i-core.png \ ! i-dvd.png \ ! i-executable.png \ ! i-fifo.png \ ! i-floppy.png \ ! i-ftp.png \ ! i-harddisk.png \ ! i-manual.png \ ! i-music-12.png \ ! i-music-24.png \ ! i-music-36.png \ ! i-music.png \ ! i-nfs.png \ ! i-network.png \ ! i-printer.png \ ! i-regular-72.png \ ! i-regular-96.png \ ! i-regular.png \ ! i-regular.xml \ ! i-smb.png \ ! i-sock.png \ ! i-spreadsheet.png \ ! i-zipdisk.png \ ! i-web.png \ ! $(NULL) EXTRA_DIST = $(icon_DATA) + subdir = icons mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs ! CONFIG_HEADER = $(top_builddir)/config.h ! CONFIG_CLEAN_FILES = ! depcomp = ! DIST_SOURCES = ! DATA = $(icon_DATA) + DIST_COMMON = Makefile.am Makefile.in + all: all-am .SUFFIXES: ! $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) ! cd $(top_srcdir) && \ ! $(AUTOMAKE) --gnu --ignore-deps icons/Makefile ! Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status ! cd $(top_builddir) && \ ! CONFIG_HEADERS= CONFIG_LINKS= \ ! CONFIG_FILES=$(subdir)/$@ $(SHELL) ./config.status ! uninstall-info-am: install-iconDATA: $(icon_DATA) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(icondir) @list='$(icon_DATA)'; for p in $$list; do \ ! if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ ! f="`echo $$p | sed -e 's|^.*/||'`"; \ ! echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(icondir)/$$f"; \ ! $(INSTALL_DATA) $$d$$p $(DESTDIR)$(icondir)/$$f; \ done uninstall-iconDATA: @$(NORMAL_UNINSTALL) ! @list='$(icon_DATA)'; for p in $$list; do \ ! f="`echo $$p | sed -e 's|^.*/||'`"; \ ! echo " rm -f $(DESTDIR)$(icondir)/$$f"; \ ! rm -f $(DESTDIR)$(icondir)/$$f; \ done tags: TAGS TAGS: ! DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ! top_distdir = .. ! distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) distdir: $(DISTFILES) @for file in $(DISTFILES); do \ ! if test -f $$file; then d=.; else d=$(srcdir); fi; \ ! dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ! if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ! $(mkinstalldirs) "$(distdir)/$$dir"; \ ! fi; \ if test -d $$d/$$file; then \ ! cp -pR $$d/$$file $(distdir) \ ! || exit 1; \ else \ test -f $(distdir)/$$file \ ! || cp -p $$d/$$file $(distdir)/$$file \ ! || exit 1; \ fi; \ done check-am: all-am check: check-am ! all-am: Makefile $(DATA) ! installdirs: ! $(mkinstalldirs) $(DESTDIR)$(icondir) install: install-am ! install-exec: install-exec-am ! install-data: install-data-am uninstall: uninstall-am + install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + installcheck: installcheck-am + install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: ! -rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]* maintainer-clean-generic: ! @echo "This command is intended for maintainers to use" ! @echo "it deletes files that may require special tools to rebuild." ! clean: clean-am ! clean-am: clean-generic mostlyclean-am ! distclean: distclean-am ! distclean-am: clean-am distclean-generic ! dvi: dvi-am ! dvi-am: ! info: info-am ! ! info-am: ! ! install-data-am: install-iconDATA ! ! install-exec-am: ! ! install-info: install-info-am ! ! install-man: ! ! installcheck-am: maintainer-clean: maintainer-clean-am ! maintainer-clean-am: distclean-am maintainer-clean-generic ! ! mostlyclean: mostlyclean-am ! ! mostlyclean-am: mostlyclean-generic ! ! uninstall-am: uninstall-iconDATA uninstall-info-am + .PHONY: all all-am check check-am clean clean-generic distclean \ + distclean-generic distdir dvi dvi-am info info-am install \ + install-am install-data install-data-am install-exec \ + install-exec-am install-iconDATA install-info install-info-am \ + install-man install-strip installcheck installcheck-am \ + installdirs maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic uninstall uninstall-am \ + uninstall-iconDATA uninstall-info-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -crN ./gnome-mime-data/install-sh /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./gnome-mime-data/install-sh *** ./gnome-mime-data/install-sh Wed Nov 13 00:08:44 2002 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./gnome-mime-data/install-sh Sat Aug 9 21:17:41 2003 *************** *** 196,202 **** if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && ! if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi else --- 196,202 ---- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && ! if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst || true; else true ; fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi else *************** *** 237,243 **** if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && ! if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && # Now rename the file to the real destination. --- 237,243 ---- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && ! if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp || true; else true;fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && # Now rename the file to the real destination. diff -crN ./gnome-mime-data/intltool-merge.in /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./gnome-mime-data/intltool-merge.in *** ./gnome-mime-data/intltool-merge.in Tue Feb 4 10:06:08 2003 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./gnome-mime-data/intltool-merge.in Sat Aug 9 21:17:30 2003 *************** *** 3,9 **** # # The Intltool Message Merger # ! # Copyright (C) 2000, 2003 Free Software Foundation. # Copyright (C) 2000, 2001 Eazel, Inc # # Intltool is free software; you can redistribute it and/or --- 3,9 ---- # # The Intltool Message Merger # ! # Copyright (C) 2000, 2002 Free Software Foundation. # Copyright (C) 2000, 2001 Eazel, Inc # # Intltool is free software; you can redistribute it and/or *************** *** 226,232 **** sub get_local_charset { my ($encoding) = @_; ! my $alias_file = $ENV{"G_CHARSET_ALIAS"} || "/gnome/lib/charset.alias"; # seek character encoding aliases in charset.alias (glib) --- 226,232 ---- sub get_local_charset { my ($encoding) = @_; ! my $alias_file = $ENV{"G_CHARSET_ALIAS"} || "/opt/freeware/lib/charset.alias"; # seek character encoding aliases in charset.alias (glib) *************** *** 364,371 **** } else { - print "WARNING: $po_file is not in UTF-8 but $encoding, converting...\n"; - my $iconv = $ENV{"INTLTOOL_ICONV"} || "iconv"; open PO_FILE, "$iconv -f $encoding -t UTF-8 $po_file|"; } --- 364,369 ---- *************** *** 458,468 **** return $_; } - - # entity_encode: (string) - # - # Encode the given string to XML format (encode '<' etc). It also - # encodes high bit if not in UTF-8 mode. sub entity_encode { --- 456,461 ---- *************** *** 476,482 **** } else { - # with UTF-8 we only encode minimalistic return join ('', map (&entity_encode_int_minimalist, @list_of_chars)); } } --- 469,474 ---- diff -crN ./gnome-mime-data/intltool-update.in /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./gnome-mime-data/intltool-update.in *** ./gnome-mime-data/intltool-update.in Tue Feb 4 10:06:08 2003 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./gnome-mime-data/intltool-update.in Sat Aug 9 21:17:30 2003 *************** *** 512,518 **** # Perform merge, remove backup file and the "messages" trash file # generated by gettext ! system ("msgmerge", "-o", "$lang.po", "$lang.po.old", "$MODULE.pot"); unlink "$lang.po.old"; unlink "messages"; } --- 512,518 ---- # Perform merge, remove backup file and the "messages" trash file # generated by gettext ! system ("msgmerge", "$lang.po.old", "$MODULE.pot", "-o", "$lang.po"); unlink "$lang.po.old"; unlink "messages"; } diff -crN ./gnome-mime-data/man/Makefile.in /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./gnome-mime-data/man/Makefile.in *** ./gnome-mime-data/man/Makefile.in Tue Feb 4 10:07:09 2003 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./gnome-mime-data/man/Makefile.in Sat Aug 9 21:17:42 2003 *************** *** 1,6 **** ! # Makefile.in generated automatically by automake 1.4-p6 from Makefile.am ! # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. --- 1,7 ---- ! # Makefile.in generated automatically by automake 1.5 from Makefile.am. ! # Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 ! # Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. *************** *** 10,15 **** --- 11,17 ---- # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. + @SET_MAKE@ SHELL = @SHELL@ *************** *** 31,43 **** mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include - - DESTDIR = - pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ - top_builddir = .. ACLOCAL = @ACLOCAL@ --- 33,41 ---- *************** *** 46,69 **** AUTOHEADER = @AUTOHEADER@ INSTALL = @INSTALL@ ! INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ transform = @program_transform_name@ - NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ DATADIRNAME = @DATADIRNAME@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ --- 44,72 ---- AUTOHEADER = @AUTOHEADER@ INSTALL = @INSTALL@ ! INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ + INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : + AMTAR = @AMTAR@ + AWK = @AWK@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ DATADIRNAME = @DATADIRNAME@ + DEPDIR = @DEPDIR@ + EXEEXT = @EXEEXT@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ *************** *** 85,92 **** INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ MKINSTALLDIRS = @MKINSTALLDIRS@ PACKAGE = @PACKAGE@ POFILES = @POFILES@ POSUB = @POSUB@ --- 88,95 ---- INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ MAINT = @MAINT@ MKINSTALLDIRS = @MKINSTALLDIRS@ + OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ POFILES = @POFILES@ POSUB = @POSUB@ *************** *** 94,133 **** PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ man_MANS = gnome-vfs-mime.5 EXTRA_DIST = gnome-vfs-mime.5.in mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs ! CONFIG_HEADER = ../config.h ! CONFIG_CLEAN_FILES = gnome-vfs-mime.5 ! man5dir = $(mandir)/man5 ! MANS = $(man_MANS) NROFF = nroff ! DIST_COMMON = Makefile.am Makefile.in gnome-vfs-mime.5.in ! ! ! DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) - TAR = gtar - GZIP_ENV = --best - all: all-redirect .SUFFIXES: ! $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) ! cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps man/Makefile ! ! Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status ! cd $(top_builddir) \ ! && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status ! gnome-vfs-mime.5: $(top_builddir)/config.status gnome-vfs-mime.5.in ! cd $(top_builddir) && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status ! install-man5: $(mkinstalldirs) $(DESTDIR)$(man5dir) ! @list='$(man5_MANS)'; \ ! l2='$(man_MANS)'; for i in $$l2; do \ case "$$i" in \ *.5*) list="$$list $$i" ;; \ esac; \ --- 97,140 ---- PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ + am__include = @am__include@ + am__quote = @am__quote@ + install_sh = @install_sh@ man_MANS = gnome-vfs-mime.5 EXTRA_DIST = gnome-vfs-mime.5.in + subdir = man mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs ! CONFIG_HEADER = $(top_builddir)/config.h ! CONFIG_CLEAN_FILES = gnome-vfs-mime.5 ! depcomp = ! DIST_SOURCES = NROFF = nroff ! MANS = $(man_MANS) ! DIST_COMMON = Makefile.am Makefile.in gnome-vfs-mime.5.in ! all: all-am .SUFFIXES: ! $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) ! cd $(top_srcdir) && \ ! $(AUTOMAKE) --gnu --ignore-deps man/Makefile ! Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status ! cd $(top_builddir) && \ ! CONFIG_HEADERS= CONFIG_LINKS= \ ! CONFIG_FILES=$(subdir)/$@ $(SHELL) ./config.status gnome-vfs-mime.5: $(top_builddir)/config.status gnome-vfs-mime.5.in ! cd $(top_builddir) && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= CONFIG_LINKS= $(SHELL) ./config.status ! uninstall-info-am: ! man5dir = $(mandir)/man5 ! install-man5: $(man5_MANS) $(man_MANS) ! @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(man5dir) ! @list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \ ! l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ ! for i in $$l2; do \ case "$$i" in \ *.5*) list="$$list $$i" ;; \ esac; \ *************** *** 137,150 **** else file=$$i; fi; \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man5dir)/$$inst"; \ $(INSTALL_DATA) $$file $(DESTDIR)$(man5dir)/$$inst; \ done - uninstall-man5: ! @list='$(man5_MANS)'; \ ! l2='$(man_MANS)'; for i in $$l2; do \ case "$$i" in \ *.5*) list="$$list $$i" ;; \ esac; \ --- 144,159 ---- else file=$$i; fi; \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ + inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man5dir)/$$inst"; \ $(INSTALL_DATA) $$file $(DESTDIR)$(man5dir)/$$inst; \ done uninstall-man5: ! @$(NORMAL_UNINSTALL) ! @list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \ ! l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ ! for i in $$l2; do \ case "$$i" in \ *.5*) list="$$list $$i" ;; \ esac; \ *************** *** 152,247 **** for i in $$list; do \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " rm -f $(DESTDIR)$(man5dir)/$$inst"; \ rm -f $(DESTDIR)$(man5dir)/$$inst; \ done - install-man: $(MANS) - @$(NORMAL_INSTALL) - $(MAKE) $(AM_MAKEFLAGS) install-man5 - uninstall-man: - @$(NORMAL_UNINSTALL) - $(MAKE) $(AM_MAKEFLAGS) uninstall-man5 tags: TAGS TAGS: ! distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) ! subdir = man distdir: $(DISTFILES) @for file in $(DISTFILES); do \ ! d=$(srcdir); \ if test -d $$d/$$file; then \ ! cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ ! || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ ! || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done - info-am: - info: info-am - dvi-am: - dvi: dvi-am check-am: all-am check: check-am ! installcheck-am: ! installcheck: installcheck-am ! install-exec-am: ! install-exec: install-exec-am ! install-data-am: install-man ! install-data: install-data-am - install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am install: install-am ! uninstall-am: uninstall-man uninstall: uninstall-am - all-am: Makefile $(MANS) - all-redirect: all-am - install-strip: - $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install - installdirs: - $(mkinstalldirs) $(DESTDIR)$(mandir)/man5 mostlyclean-generic: clean-generic: distclean-generic: ! -rm -f Makefile $(CONFIG_CLEAN_FILES) ! -rm -f config.cache config.log stamp-h stamp-h[0-9]* maintainer-clean-generic: ! mostlyclean-am: mostlyclean-generic ! mostlyclean: mostlyclean-am ! clean-am: clean-generic mostlyclean-am ! clean: clean-am ! distclean-am: distclean-generic clean-am ! distclean: distclean-am ! maintainer-clean-am: maintainer-clean-generic distclean-am ! @echo "This command is intended for maintainers to use;" ! @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-am ! .PHONY: install-man5 uninstall-man5 install-man uninstall-man tags \ ! distdir info-am info dvi-am dvi check check-am installcheck-am \ ! installcheck install-exec-am install-exec install-data-am install-data \ ! install-am install uninstall-am uninstall all-redirect all-am all \ ! installdirs mostlyclean-generic distclean-generic clean-generic \ ! maintainer-clean-generic clean mostlyclean distclean maintainer-clean # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. --- 161,272 ---- for i in $$list; do \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ + inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " rm -f $(DESTDIR)$(man5dir)/$$inst"; \ rm -f $(DESTDIR)$(man5dir)/$$inst; \ done tags: TAGS TAGS: ! DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ! top_distdir = .. ! distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) distdir: $(DISTFILES) @for file in $(DISTFILES); do \ ! if test -f $$file; then d=.; else d=$(srcdir); fi; \ ! dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ! if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ! $(mkinstalldirs) "$(distdir)/$$dir"; \ ! fi; \ if test -d $$d/$$file; then \ ! cp -pR $$d/$$file $(distdir) \ ! || exit 1; \ else \ test -f $(distdir)/$$file \ ! || cp -p $$d/$$file $(distdir)/$$file \ ! || exit 1; \ fi; \ done check-am: all-am check: check-am ! all-am: Makefile $(MANS) ! installdirs: ! $(mkinstalldirs) $(DESTDIR)$(man5dir) install: install-am ! install-exec: install-exec-am ! install-data: install-data-am uninstall: uninstall-am + install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + installcheck: installcheck-am + install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: ! -rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]* maintainer-clean-generic: ! @echo "This command is intended for maintainers to use" ! @echo "it deletes files that may require special tools to rebuild." ! clean: clean-am ! clean-am: clean-generic mostlyclean-am ! distclean: distclean-am ! distclean-am: clean-am distclean-generic ! dvi: dvi-am ! dvi-am: ! info: info-am ! ! info-am: ! ! install-data-am: install-man ! ! install-exec-am: ! ! install-info: install-info-am ! ! install-man: install-man5 ! ! installcheck-am: maintainer-clean: maintainer-clean-am ! maintainer-clean-am: distclean-am maintainer-clean-generic ! ! mostlyclean: mostlyclean-am ! ! mostlyclean-am: mostlyclean-generic ! ! uninstall-am: uninstall-info-am uninstall-man ! ! uninstall-man: uninstall-man5 + .PHONY: all all-am check check-am clean clean-generic distclean \ + distclean-generic distdir dvi dvi-am info info-am install \ + install-am install-data install-data-am install-exec \ + install-exec-am install-info install-info-am install-man \ + install-man5 install-strip installcheck installcheck-am \ + installdirs maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic uninstall uninstall-am \ + uninstall-info-am uninstall-man uninstall-man5 # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -crN ./gnome-mime-data/missing /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./gnome-mime-data/missing *** ./gnome-mime-data/missing Wed Nov 13 00:08:44 2002 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./gnome-mime-data/missing Sat Aug 9 21:17:41 2003 *************** *** 1,7 **** #! /bin/sh # Common stub for a few missing GNU programs while installing. ! # Copyright (C) 1996, 1997, 2001, 2002 Free Software Foundation, Inc. ! # Franc,ois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by --- 1,7 ---- #! /bin/sh # Common stub for a few missing GNU programs while installing. ! # Copyright 1996, 1997, 1999, 2000 Free Software Foundation, Inc. ! # Originally by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by *************** *** 18,37 **** # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. if test $# -eq 0; then echo 1>&2 "Try \`$0 --help' for more information" exit 1 fi # In the cases where this matters, `missing' is being run in the # srcdir already. ! if test -f configure.in; then configure_ac=configure.ac else configure_ac=configure.in fi case "$1" in -h|--h|--he|--hel|--help) echo "\ --- 18,55 ---- # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. + # As a special exception to the GNU General Public License, if you + # distribute this file as part of a program that contains a + # configuration script generated by Autoconf, you may include it under + # the same distribution terms that you use for the rest of that program. + if test $# -eq 0; then echo 1>&2 "Try \`$0 --help' for more information" exit 1 fi + run=: + # In the cases where this matters, `missing' is being run in the # srcdir already. ! if test -f configure.ac; then configure_ac=configure.ac else configure_ac=configure.in fi case "$1" in + --run) + # Try to run requested program, and just exit if it succeeds. + run= + shift + "$@" && exit 0 + ;; + esac + + # If it does not exist, or fails to run (possibly an outdated version), + # try to emulate it. + case "$1" in -h|--h|--he|--hel|--help) echo "\ *************** *** 43,48 **** --- 61,67 ---- Options: -h, --help display this help and exit -v, --version output version information and exit + --run try to run the given command, and emulate it if it fails Supported PROGRAM values: aclocal touch file \`aclocal.m4' *************** *** 51,63 **** automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file yacc create \`y.tab.[ch]', if possible, from existing .[ch]" ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) ! echo "missing - GNU libit 0.0" ;; -*) --- 70,84 ---- automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c + help2man touch the output file lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file + tar try tar, gnutar, gtar, then tar without non-portable flags yacc create \`y.tab.[ch]', if possible, from existing .[ch]" ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) ! echo "missing 0.3 - GNU automake" ;; -*) *************** *** 66,75 **** exit 1 ;; ! aclocal*) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if ! you modified \`acinclude.m4' or \`$configure_ac'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." touch aclocal.m4 --- 87,96 ---- exit 1 ;; ! aclocal) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if ! you modified \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." touch aclocal.m4 *************** *** 78,84 **** autoconf) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if ! you modified \`$configure_ac'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch configure --- 99,105 ---- autoconf) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if ! you modified \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch configure *************** *** 87,96 **** autoheader) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if ! you modified \`acconfig.h' or \`$configure_ac'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." ! files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' $configure_ac` test -z "$files" && files="config.h" touch_files= for f in $files; do --- 108,117 ---- autoheader) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if ! you modified \`acconfig.h' or \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." ! files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` test -z "$files" && files="config.h" touch_files= for f in $files; do *************** *** 103,112 **** touch $touch_files ;; ! automake*) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if ! you modified \`Makefile.am', \`acinclude.m4' or \`$configure_ac'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print | --- 124,133 ---- touch $touch_files ;; ! automake) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if ! you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print | *************** *** 167,173 **** --- 188,219 ---- fi ;; + help2man) + echo 1>&2 "\ + WARNING: \`$1' is missing on your system. You should only need it if + you modified a dependency of a manual page. You may need the + \`Help2man' package in order for those modifications to take + effect. You can get \`Help2man' from any GNU archive site." + + file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + if test -z "$file"; then + file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` + fi + if [ -f "$file" ]; then + touch $file + else + test -z "$file" || exec >$file + echo ".ab help2man is required to generate this page" + exit 1 + fi + ;; + makeinfo) + if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then + # We have makeinfo, but it failed. + exit 1 + fi + echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file *************** *** 183,188 **** --- 229,273 ---- touch $file ;; + tar) + shift + if test -n "$run"; then + echo 1>&2 "ERROR: \`tar' requires --run" + exit 1 + fi + + # We have already tried tar in the generic part. + # Look for gnutar/gtar before invocation to avoid ugly error + # messages. + if (gnutar --version > /dev/null 2>&1); then + gnutar ${1+"$@"} && exit 0 + fi + if (gtar --version > /dev/null 2>&1); then + gtar ${1+"$@"} && exit 0 + fi + firstarg="$1" + if shift; then + case "$firstarg" in + *o*) + firstarg=`echo "$firstarg" | sed s/o//` + tar "$firstarg" ${1+"$@"} && exit 0 + ;; + esac + case "$firstarg" in + *h*) + firstarg=`echo "$firstarg" | sed s/h//` + tar "$firstarg" ${1+"$@"} && exit 0 + ;; + esac + fi + + echo 1>&2 "\ + WARNING: I can't seem to be able to run \`tar' with the given arguments. + You may want to install GNU tar or Free paxutils, or check the + command line arguments." + exit 1 + ;; + *) echo 1>&2 "\ WARNING: \`$1' is needed, and you do not seem to have it handy on your diff -crN ./gnome-mime-data/stamp-h.in /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./gnome-mime-data/stamp-h.in *** ./gnome-mime-data/stamp-h.in Tue Feb 4 10:07:03 2003 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./gnome-mime-data/stamp-h.in Sat Aug 9 21:17:41 2003 *************** *** 1 **** - timestamp --- 0 ----