diff -crN ./gnome-audio/install-sh /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./gnome-audio/install-sh
*** ./gnome-audio/install-sh	Thu Jan  1 01:00:00 1970
--- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./gnome-audio/install-sh	Tue Jan 21 12:40:50 2003
***************
*** 0 ****
--- 1,251 ----
+ #!/bin/sh
+ #
+ # install - install a program, script, or datafile
+ # This comes from X11R5 (mit/util/scripts/install.sh).
+ #
+ # Copyright 1991 by the Massachusetts Institute of Technology
+ #
+ # Permission to use, copy, modify, distribute, and sell this software and its
+ # documentation for any purpose is hereby granted without fee, provided that
+ # the above copyright notice appear in all copies and that both that
+ # copyright notice and this permission notice appear in supporting
+ # documentation, and that the name of M.I.T. not be used in advertising or
+ # publicity pertaining to distribution of the software without specific,
+ # written prior permission.  M.I.T. makes no representations about the
+ # suitability of this software for any purpose.  It is provided "as is"
+ # without express or implied warranty.
+ #
+ # Calling this script install-sh is preferred over install.sh, to prevent
+ # `make' implicit rules from creating a file called install from it
+ # when there is no Makefile.
+ #
+ # This script is compatible with the BSD install script, but was written
+ # from scratch.  It can only install one file at a time, a restriction
+ # shared with many OS's install programs.
+ 
+ 
+ # set DOITPROG to echo to test this script
+ 
+ # Don't use :- since 4.3BSD and earlier shells don't like it.
+ doit="${DOITPROG-}"
+ 
+ 
+ # put in absolute paths if you don't have them in your path; or use env. vars.
+ 
+ mvprog="${MVPROG-mv}"
+ cpprog="${CPPROG-cp}"
+ chmodprog="${CHMODPROG-chmod}"
+ chownprog="${CHOWNPROG-chown}"
+ chgrpprog="${CHGRPPROG-chgrp}"
+ stripprog="${STRIPPROG-strip}"
+ rmprog="${RMPROG-rm}"
+ mkdirprog="${MKDIRPROG-mkdir}"
+ 
+ transformbasename=""
+ transform_arg=""
+ instcmd="$mvprog"
+ chmodcmd="$chmodprog 0755"
+ chowncmd=""
+ chgrpcmd=""
+ stripcmd=""
+ rmcmd="$rmprog -f"
+ mvcmd="$mvprog"
+ src=""
+ dst=""
+ dir_arg=""
+ 
+ while [ x"$1" != x ]; do
+     case $1 in
+ 	-c) instcmd="$cpprog"
+ 	    shift
+ 	    continue;;
+ 
+ 	-d) dir_arg=true
+ 	    shift
+ 	    continue;;
+ 
+ 	-m) chmodcmd="$chmodprog $2"
+ 	    shift
+ 	    shift
+ 	    continue;;
+ 
+ 	-o) chowncmd="$chownprog $2"
+ 	    shift
+ 	    shift
+ 	    continue;;
+ 
+ 	-g) chgrpcmd="$chgrpprog $2"
+ 	    shift
+ 	    shift
+ 	    continue;;
+ 
+ 	-s) stripcmd="$stripprog"
+ 	    shift
+ 	    continue;;
+ 
+ 	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
+ 	    shift
+ 	    continue;;
+ 
+ 	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+ 	    shift
+ 	    continue;;
+ 
+ 	*)  if [ x"$src" = x ]
+ 	    then
+ 		src=$1
+ 	    else
+ 		# this colon is to work around a 386BSD /bin/sh bug
+ 		:
+ 		dst=$1
+ 	    fi
+ 	    shift
+ 	    continue;;
+     esac
+ done
+ 
+ if [ x"$src" = x ]
+ then
+ 	echo "install:	no input file specified"
+ 	exit 1
+ else
+ 	true
+ fi
+ 
+ if [ x"$dir_arg" != x ]; then
+ 	dst=$src
+ 	src=""
+ 	
+ 	if [ -d $dst ]; then
+ 		instcmd=:
+ 		chmodcmd=""
+ 	else
+ 		instcmd=mkdir
+ 	fi
+ else
+ 
+ # Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+ # might cause directories to be created, which would be especially bad 
+ # if $src (and thus $dsttmp) contains '*'.
+ 
+ 	if [ -f $src -o -d $src ]
+ 	then
+ 		true
+ 	else
+ 		echo "install:  $src does not exist"
+ 		exit 1
+ 	fi
+ 	
+ 	if [ x"$dst" = x ]
+ 	then
+ 		echo "install:	no destination specified"
+ 		exit 1
+ 	else
+ 		true
+ 	fi
+ 
+ # If destination is a directory, append the input filename; if your system
+ # does not like double slashes in filenames, you may need to add some logic
+ 
+ 	if [ -d $dst ]
+ 	then
+ 		dst="$dst"/`basename $src`
+ 	else
+ 		true
+ 	fi
+ fi
+ 
+ ## this sed command emulates the dirname command
+ dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+ 
+ # Make sure that the destination directory exists.
+ #  this part is taken from Noah Friedman's mkinstalldirs script
+ 
+ # Skip lots of stat calls in the usual case.
+ if [ ! -d "$dstdir" ]; then
+ defaultIFS='	
+ '
+ IFS="${IFS-${defaultIFS}}"
+ 
+ oIFS="${IFS}"
+ # Some sh's can't handle IFS=/ for some reason.
+ IFS='%'
+ set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+ IFS="${oIFS}"
+ 
+ pathcomp=''
+ 
+ while [ $# -ne 0 ] ; do
+ 	pathcomp="${pathcomp}${1}"
+ 	shift
+ 
+ 	if [ ! -d "${pathcomp}" ] ;
+         then
+ 		$mkdirprog "${pathcomp}"
+ 	else
+ 		true
+ 	fi
+ 
+ 	pathcomp="${pathcomp}/"
+ done
+ fi
+ 
+ if [ x"$dir_arg" != x ]
+ then
+ 	$doit $instcmd $dst &&
+ 
+ 	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
+ 	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
+ 	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
+ 	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+ else
+ 
+ # If we're going to rename the final executable, determine the name now.
+ 
+ 	if [ x"$transformarg" = x ] 
+ 	then
+ 		dstfile=`basename $dst`
+ 	else
+ 		dstfile=`basename $dst $transformbasename | 
+ 			sed $transformarg`$transformbasename
+ 	fi
+ 
+ # don't allow the sed command to completely eliminate the filename
+ 
+ 	if [ x"$dstfile" = x ] 
+ 	then
+ 		dstfile=`basename $dst`
+ 	else
+ 		true
+ 	fi
+ 
+ # Make a temp file name in the proper directory.
+ 
+ 	dsttmp=$dstdir/#inst.$$#
+ 
+ # Move or copy the file name to the temp name
+ 
+ 	$doit $instcmd $src $dsttmp &&
+ 
+ 	trap "rm -f ${dsttmp}" 0 &&
+ 
+ # and set any options; do chmod last to preserve setuid bits
+ 
+ # If any of these fail, we abort the whole thing.  If we want to
+ # ignore errors from any of these, just make sure not to ignore
+ # errors from the above "$doit $instcmd $src $dsttmp" command.
+ 
+ 	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
+ 	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
+ 	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
+ 	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+ 
+ # Now rename the file to the real destination.
+ 
+ 	$doit $rmcmd -f $dstdir/$dstfile &&
+ 	$doit $mvcmd $dsttmp $dstdir/$dstfile 
+ 
+ fi &&
+ 
+ 
+ exit 0
diff -crN ./gnome-audio/sounds/Makefile /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./gnome-audio/sounds/Makefile
*** ./gnome-audio/sounds/Makefile	Sat Feb 19 22:39:54 2000
--- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./gnome-audio/sounds/Makefile	Tue Jan 21 13:04:44 2003
***************
*** 1,7 ****
! prefix=$(shell gnome-config --prefix)
  
  LN_S=ln -sf
! INSTALL_DATA=install -c -m 444 
  # Which one is more portable
  # MKINSTALLDIRS=install -d
  MKINSTALLDIRS=mkdir -p
--- 1,7 ----
! prefix=$(shell pkg-config gnome-desktop-2.0 --variable=prefix)
  
  LN_S=ln -sf
! INSTALL_DATA=sh ../install-sh -c -m 444 
  # Which one is more portable
  # MKINSTALLDIRS=install -d
  MKINSTALLDIRS=mkdir -p
***************
*** 12,21 ****
  
  install-files:
  	for I in *.wav */*.wav ; do \
! 		$(MKINSTALLDIRS) $(prefix)/share/sounds/`dirname $$I`; \
! 		$(INSTALL_DATA) $$I $(prefix)/share/sounds/$$I; \
  	done
  
  install-default-links:
! 	$(LN_S) startup3.wav $(prefix)/share/sounds/login.wav
! 	$(LN_S) shutdown1.wav $(prefix)/share/sounds/logout.wav
--- 12,21 ----
  
  install-files:
  	for I in *.wav */*.wav ; do \
! 		$(MKINSTALLDIRS) $(DESTDIR)$(prefix)/share/sounds/`dirname $$I`; \
! 		$(INSTALL_DATA) $$I $(DESTDIR)$(prefix)/share/sounds/$$I; \
  	done
  
  install-default-links:
! 	$(LN_S) startup3.wav $(DESTDIR)$(prefix)/share/sounds/login.wav
! 	$(LN_S) shutdown1.wav $(DESTDIR)$(prefix)/share/sounds/logout.wav