diff -crN ./OTHERS/fontconfig/Makefile.in /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/Makefile.in *** ./OTHERS/fontconfig/Makefile.in Thu Jan 1 01:00:00 1970 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/Makefile.in Tue Nov 15 17:06:00 2005 *************** *** 0 **** --- 1,737 ---- + # Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, + # 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + + # This program is distributed in the hope that it will be useful, + # but WITHOUT ANY WARRANTY, to the extent permitted by law; without + # even the implied warranty of MERCHANTABILITY or FITNESS FOR A + # PARTICULAR PURPOSE. + + @SET_MAKE@ + + # + # $Id: Makefile.am,v 1.8 2003/04/11 22:53:53 keithp Exp $ + # + # Copyright © 2003 Keith Packard + # + # Permission to use, copy, modify, distribute, and sell this software and its + # documentation for any purpose is hereby granted without fee, provided that + # the above copyright notice appear in all copies and that both that + # copyright notice and this permission notice appear in supporting + # documentation, and that the name of Keith Packard not be used in + # advertising or publicity pertaining to distribution of the software without + # specific, written prior permission. Keith Packard makes no + # representations about the suitability of this software for any purpose. It + # is provided "as is" without express or implied warranty. + # + # KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + # INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + # EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR + # CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + # DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + # TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + # PERFORMANCE OF THIS SOFTWARE. + + srcdir = @srcdir@ + top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ + top_builddir = . + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c + INSTALL_HEADER = $(INSTALL_DATA) + transform = $(program_transform_name) + NORMAL_INSTALL = : + PRE_INSTALL = : + POST_INSTALL = : + NORMAL_UNINSTALL = : + PRE_UNINSTALL = : + POST_UNINSTALL = : + build_triplet = @build@ + host_triplet = @host@ + DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(srcdir)/config.h.in \ + $(srcdir)/fontconfig-zip.in $(srcdir)/fontconfig.pc.in \ + $(srcdir)/fontconfig.spec.in $(srcdir)/fonts.conf.in \ + $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ + config.guess config.sub depcomp install-sh ltmain.sh missing + subdir = . + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/configure.in + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno configure.status.lineno + mkinstalldirs = $(install_sh) -d + CONFIG_HEADER = config.h + CONFIG_CLEAN_FILES = fontconfig.spec fontconfig.pc fonts.conf \ + fontconfig-zip + depcomp = + am__depfiles_maybe = + SOURCES = + DIST_SOURCES = + RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-exec-recursive install-info-recursive \ + install-recursive installcheck-recursive installdirs-recursive \ + pdf-recursive ps-recursive uninstall-info-recursive \ + uninstall-recursive + am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; + am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; + am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; + am__installdirs = "$(DESTDIR)$(configdir)" "$(DESTDIR)$(pkgconfigdir)" + configDATA_INSTALL = $(INSTALL_DATA) + pkgconfigDATA_INSTALL = $(INSTALL_DATA) + DATA = $(config_DATA) $(pkgconfig_DATA) + ETAGS = etags + CTAGS = ctags + DIST_SUBDIRS = $(SUBDIRS) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + distdir = $(PACKAGE)-$(VERSION) + top_distdir = $(distdir) + am__remove_distdir = \ + { test ! -d $(distdir) \ + || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -fr $(distdir); }; } + DIST_ARCHIVES = $(distdir).tar.gz + GZIP_ENV = --best + distuninstallcheck_listfiles = find . -type f -print + distcleancheck_listfiles = find . -type f -print + ACLOCAL = @ACLOCAL@ + AMDEP_FALSE = @AMDEP_FALSE@ + AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AUTOCONF = @AUTOCONF@ + AUTOHEADER = @AUTOHEADER@ + AUTOMAKE = @AUTOMAKE@ + AWK = @AWK@ + CC = @CC@ + CCDEPMODE = @CCDEPMODE@ + CFLAGS = @CFLAGS@ + CONFDIR = @CONFDIR@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DEFS = @DEFS@ + DEPDIR = @DEPDIR@ + DOCDIR = @DOCDIR@ + ECHO = @ECHO@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ + ENABLE_DOCS_FALSE = @ENABLE_DOCS_FALSE@ + ENABLE_DOCS_TRUE = @ENABLE_DOCS_TRUE@ + EXEEXT = @EXEEXT@ + EXPAT_CFLAGS = @EXPAT_CFLAGS@ + EXPAT_LIBS = @EXPAT_LIBS@ + FC_ADD_FONTS = @FC_ADD_FONTS@ + FC_DEFAULT_FONTS = @FC_DEFAULT_FONTS@ + FC_FONTDATE = @FC_FONTDATE@ + FC_FONTPATH = @FC_FONTPATH@ + FREETYPE_CFLAGS = @FREETYPE_CFLAGS@ + FREETYPE_LIBS = @FREETYPE_LIBS@ + HASDOCBOOK = @HASDOCBOOK@ + HAVE_EXPAT = @HAVE_EXPAT@ + HAVE_XMLPARSE_H = @HAVE_XMLPARSE_H@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + LDFLAGS = @LDFLAGS@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + LT_CURRENT = @LT_CURRENT@ + LT_CURRENT_MINUS_AGE = @LT_CURRENT_MINUS_AGE@ + LT_REVISION = @LT_REVISION@ + LT_VERSION_INFO = @LT_VERSION_INFO@ + MAKEINFO = @MAKEINFO@ + MS_LIB_AVAILABLE_FALSE = @MS_LIB_AVAILABLE_FALSE@ + MS_LIB_AVAILABLE_TRUE = @MS_LIB_AVAILABLE_TRUE@ + OBJEXT = @OBJEXT@ + ORTH_FILES = @ORTH_FILES@ + OS_WIN32_FALSE = @OS_WIN32_FALSE@ + OS_WIN32_TRUE = @OS_WIN32_TRUE@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + RANLIB = @RANLIB@ + SET_MAKE = @SET_MAKE@ + SHELL = @SHELL@ + STRIP = @STRIP@ + VERSION = @VERSION@ + ac_ct_CC = @ac_ct_CC@ + ac_ct_RANLIB = @ac_ct_RANLIB@ + ac_ct_STRIP = @ac_ct_STRIP@ + am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ + am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ + am__tar = @am__tar@ + am__untar = @am__untar@ + bindir = @bindir@ + build = @build@ + build_alias = @build_alias@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ + confdir = @confdir@ + datadir = @datadir@ + exec_prefix = @exec_prefix@ + ft_config = @ft_config@ + host = @host@ + host_alias = @host_alias@ + host_cpu = @host_cpu@ + host_os = @host_os@ + host_vendor = @host_vendor@ + includedir = @includedir@ + infodir = @infodir@ + install_sh = @install_sh@ + libdir = @libdir@ + libexecdir = @libexecdir@ + localstatedir = @localstatedir@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + ms_librarian = @ms_librarian@ + oldincludedir = @oldincludedir@ + prefix = @prefix@ + program_transform_name = @program_transform_name@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ + SUBDIRS = fontconfig fc-lang src fc-cache fc-list doc test + EXTRA_DIST = \ + fontconfig.pc.in \ + fonts.conf.in \ + fonts.dtd \ + local.conf \ + fontconfig.spec.in \ + fontconfig.spec \ + fontconfig-zip.in + + pkgconfigdir = $(libdir)/pkgconfig + pkgconfig_DATA = fontconfig.pc + configdir = $(CONFDIR) + config_DATA = fonts.conf fonts.dtd + all: config.h + $(MAKE) $(AM_MAKEFLAGS) all-recursive + + .SUFFIXES: + am--refresh: + @: + $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --gnu --ignore-deps'; \ + cd $(srcdir) && $(AUTOMAKE) --gnu --ignore-deps \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu --ignore-deps Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu --ignore-deps Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + + $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + + $(top_srcdir)/configure: $(am__configure_deps) + cd $(srcdir) && $(AUTOCONF) + $(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) + + config.h: stamp-h1 + @if test ! -f $@; then \ + rm -f stamp-h1; \ + $(MAKE) stamp-h1; \ + else :; fi + + stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status config.h + $(srcdir)/config.h.in: $(am__configure_deps) + cd $(top_srcdir) && $(AUTOHEADER) + rm -f stamp-h1 + touch $@ + + distclean-hdr: + -rm -f config.h stamp-h1 + fontconfig.spec: $(top_builddir)/config.status $(srcdir)/fontconfig.spec.in + cd $(top_builddir) && $(SHELL) ./config.status $@ + fontconfig.pc: $(top_builddir)/config.status $(srcdir)/fontconfig.pc.in + cd $(top_builddir) && $(SHELL) ./config.status $@ + fonts.conf: $(top_builddir)/config.status $(srcdir)/fonts.conf.in + cd $(top_builddir) && $(SHELL) ./config.status $@ + fontconfig-zip: $(top_builddir)/config.status $(srcdir)/fontconfig-zip.in + cd $(top_builddir) && $(SHELL) ./config.status $@ + + mostlyclean-libtool: + -rm -f *.lo + + clean-libtool: + -rm -rf .libs _libs + + distclean-libtool: + -rm -f libtool + uninstall-info-am: + install-configDATA: $(config_DATA) + @$(NORMAL_INSTALL) + test -z "$(configdir)" || $(mkdir_p) "$(DESTDIR)$(configdir)" + @list='$(config_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ + echo " $(configDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(configdir)/$$f'"; \ + $(configDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(configdir)/$$f"; \ + done + + uninstall-configDATA: + @$(NORMAL_UNINSTALL) + @list='$(config_DATA)'; for p in $$list; do \ + f=$(am__strip_dir) \ + echo " rm -f '$(DESTDIR)$(configdir)/$$f'"; \ + rm -f "$(DESTDIR)$(configdir)/$$f"; \ + done + install-pkgconfigDATA: $(pkgconfig_DATA) + @$(NORMAL_INSTALL) + test -z "$(pkgconfigdir)" || $(mkdir_p) "$(DESTDIR)$(pkgconfigdir)" + @list='$(pkgconfig_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ + echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ + $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \ + done + + uninstall-pkgconfigDATA: + @$(NORMAL_UNINSTALL) + @list='$(pkgconfig_DATA)'; for p in $$list; do \ + f=$(am__strip_dir) \ + echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ + rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \ + done + + # This directory's subdirectories are mostly independent; you can cd + # into them and run `make' without going through this Makefile. + # To change the values of `make' variables: instead of editing Makefiles, + # (1) if the variable is set in `config.status', edit `config.status' + # (which will cause the Makefiles to be regenerated when you run `make'); + # (2) otherwise, pass the desired values on the `make' command line. + $(RECURSIVE_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + + mostlyclean-recursive clean-recursive distclean-recursive \ + maintainer-clean-recursive: + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" + tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + mkid -fID $$unique + tags: TAGS + + TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi + ctags: CTAGS + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) + $(am__remove_distdir) + mkdir $(distdir) + $(mkdir_p) $(distdir)/. $(distdir)/doc $(distdir)/src + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ + list='$(DISTFILES)'; for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ + esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkdir_p) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(mkdir_p) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ + distdir) \ + || exit 1; \ + fi; \ + done + -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r $(distdir) + dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + + dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 + $(am__remove_distdir) + + dist-tarZ: distdir + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__remove_distdir) + + dist-shar: distdir + shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + $(am__remove_distdir) + + dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__remove_distdir) + + dist dist-all: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + + # This target untars the dist file and tries a VPATH configuration. Then + # it guarantees that the distribution is self-contained by making another + # tarfile. + distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir); chmod a+w $(distdir) + mkdir $(distdir)/_build + mkdir $(distdir)/_inst + chmod a-w $(distdir) + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && cd $(distdir)/_build \ + && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck + $(am__remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' + distuninstallcheck: + @cd $(distuninstallcheck_dir) \ + && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 + distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 + check-am: all-am + check: check-recursive + all-am: Makefile $(DATA) config.h + installdirs: installdirs-recursive + installdirs-am: + for dir in "$(DESTDIR)$(configdir)" "$(DESTDIR)$(pkgconfigdir)"; do \ + test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: install-recursive + install-exec: install-exec-recursive + install-data: install-data-recursive + uninstall: uninstall-recursive + + install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + + installcheck: installcheck-recursive + install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + mostlyclean-generic: + + clean-generic: + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + clean: clean-recursive + + clean-am: clean-generic clean-libtool mostlyclean-am + + distclean: distclean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -f Makefile + distclean-am: clean-am distclean-generic distclean-hdr \ + distclean-libtool distclean-tags + + dvi: dvi-recursive + + dvi-am: + + html: html-recursive + + info: info-recursive + + info-am: + + install-data-am: install-configDATA install-data-local \ + install-pkgconfigDATA + + install-exec-am: + + install-info: install-info-recursive + + install-man: + + installcheck-am: + + maintainer-clean: maintainer-clean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -f Makefile + maintainer-clean-am: distclean-am maintainer-clean-generic + + mostlyclean: mostlyclean-recursive + + mostlyclean-am: mostlyclean-generic mostlyclean-libtool + + pdf: pdf-recursive + + pdf-am: + + ps: ps-recursive + + ps-am: + + uninstall-am: uninstall-configDATA uninstall-info-am \ + uninstall-pkgconfigDATA + + uninstall-info: uninstall-info-recursive + + .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ + check-am clean clean-generic clean-libtool clean-recursive \ + ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ + dist-shar dist-tarZ dist-zip distcheck distclean \ + distclean-generic distclean-hdr distclean-libtool \ + distclean-recursive distclean-tags distcleancheck distdir \ + distuninstallcheck dvi dvi-am html html-am info info-am \ + install install-am install-configDATA install-data \ + install-data-am install-data-local install-exec \ + install-exec-am install-info install-info-am install-man \ + install-pkgconfigDATA install-strip installcheck \ + installcheck-am installdirs installdirs-am maintainer-clean \ + maintainer-clean-generic maintainer-clean-recursive \ + mostlyclean mostlyclean-generic mostlyclean-libtool \ + mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \ + uninstall uninstall-am uninstall-configDATA uninstall-info-am \ + uninstall-pkgconfigDATA + + + install-data-local: + if [ -f $(DESTDIR)$(configdir)/local.conf ]; then \ + echo "not overwriting existing $(DESTDIR)$(configdir)/local.conf"; \ + else if [ -f $(srcdir)/local.conf ]; then \ + echo " $(INSTALL_DATA) $(srcdir)/local.conf $(DESTDIR)$(configdir)/local.conf"; \ + $(INSTALL_DATA) $(srcdir)/local.conf $(DESTDIR)$(configdir)/local.conf; \ + else if [ -f local.conf ]; then \ + echo " $(INSTALL_DATA) local.conf $(DESTDIR)$(configdir)/local.conf"; \ + $(INSTALL_DATA) local.conf $(DESTDIR)$(configdir)/local.conf; \ + fi; fi; fi + if [ x$(DESTDIR) = x ]; then fc-cache/fc-cache -f -v; fi + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: diff -crN ./OTHERS/fontconfig/aclocal.m4 /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/aclocal.m4 *** ./OTHERS/fontconfig/aclocal.m4 Thu Jan 1 01:00:00 1970 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/aclocal.m4 Tue Nov 15 17:05:07 2005 *************** *** 0 **** --- 1,4345 ---- + # generated automatically by aclocal 1.9.6 -*- Autoconf -*- + + # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, + # 2005 Free Software Foundation, Inc. + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + + # This program is distributed in the hope that it will be useful, + # but WITHOUT ANY WARRANTY, to the extent permitted by law; without + # even the implied warranty of MERCHANTABILITY or FITNESS FOR A + # PARTICULAR PURPOSE. + + # libtool.m4 - Configure libtool for the host system. -*-Shell-script-*- + + # serial 46 AC_PROG_LIBTOOL + + AC_DEFUN([AC_PROG_LIBTOOL], + [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl + + # This can be used to rebuild libtool when needed + LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" + + # Always use our own libtool. + LIBTOOL='$(SHELL) $(top_builddir)/libtool' + AC_SUBST(LIBTOOL)dnl + + # Prevent multiple expansion + define([AC_PROG_LIBTOOL], []) + ]) + + AC_DEFUN([AC_LIBTOOL_SETUP], + [AC_PREREQ(2.13)dnl + AC_REQUIRE([AC_ENABLE_SHARED])dnl + AC_REQUIRE([AC_ENABLE_STATIC])dnl + AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl + AC_REQUIRE([AC_CANONICAL_HOST])dnl + AC_REQUIRE([AC_CANONICAL_BUILD])dnl + AC_REQUIRE([AC_PROG_CC])dnl + AC_REQUIRE([AC_PROG_LD])dnl + AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl + AC_REQUIRE([AC_PROG_NM])dnl + AC_REQUIRE([AC_PROG_LN_S])dnl + AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl + AC_REQUIRE([AC_OBJEXT])dnl + AC_REQUIRE([AC_EXEEXT])dnl + dnl + + _LT_AC_PROG_ECHO_BACKSLASH + # Only perform the check for file, if the check method requires it + case $deplibs_check_method in + file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + AC_PATH_MAGIC + fi + ;; + esac + + AC_CHECK_TOOL(RANLIB, ranlib, :) + AC_CHECK_TOOL(STRIP, strip, :) + + ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) + ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], + enable_win32_dll=yes, enable_win32_dll=no) + + AC_ARG_ENABLE(libtool-lock, + [ --disable-libtool-lock avoid locking (might break parallel builds)]) + test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + + # Some flags need to be propagated to the compiler or linker for good + # libtool support. + case $host in + *-*-irix6*) + # Find out which ABI we are using. + echo '[#]line __oline__ "configure"' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + rm -rf conftest* + ;; + + *-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, + [AC_LANG_SAVE + AC_LANG_C + AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) + AC_LANG_RESTORE]) + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; + + ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], + [*-*-cygwin* | *-*-mingw* | *-*-pw32*) + AC_CHECK_TOOL(DLLTOOL, dlltool, false) + AC_CHECK_TOOL(AS, as, false) + AC_CHECK_TOOL(OBJDUMP, objdump, false) + + # recent cygwin and mingw systems supply a stub DllMain which the user + # can override, but on older systems we have to supply one + AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain, + [AC_TRY_LINK([], + [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*); + DllMain (0, 0, 0);], + [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])]) + + case $host/$CC in + *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*) + # old mingw systems require "-dll" to link a DLL, while more recent ones + # require "-mdll" + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -mdll" + AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch, + [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])]) + CFLAGS="$SAVE_CFLAGS" ;; + *-*-cygwin* | *-*-pw32*) + # cygwin systems need to pass --dll to the linker, and not link + # crt.o which will require a WinMain@16 definition. + lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;; + esac + ;; + ]) + esac + + _LT_AC_LTCONFIG_HACK + + ]) + + # AC_LIBTOOL_HEADER_ASSERT + # ------------------------ + AC_DEFUN([AC_LIBTOOL_HEADER_ASSERT], + [AC_CACHE_CHECK([whether $CC supports assert without backlinking], + [lt_cv_func_assert_works], + [case $host in + *-*-solaris*) + if test "$GCC" = yes && test "$with_gnu_ld" != yes; then + case `$CC --version 2>/dev/null` in + [[12]].*) lt_cv_func_assert_works=no ;; + *) lt_cv_func_assert_works=yes ;; + esac + fi + ;; + esac]) + + if test "x$lt_cv_func_assert_works" = xyes; then + AC_CHECK_HEADERS(assert.h) + fi + ])# AC_LIBTOOL_HEADER_ASSERT + + # _LT_AC_CHECK_DLFCN + # -------------------- + AC_DEFUN([_LT_AC_CHECK_DLFCN], + [AC_CHECK_HEADERS(dlfcn.h) + ])# _LT_AC_CHECK_DLFCN + + # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE + # --------------------------------- + AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], + [AC_REQUIRE([AC_CANONICAL_HOST]) + AC_REQUIRE([AC_PROG_NM]) + AC_REQUIRE([AC_OBJEXT]) + # Check for command to grab the raw symbol name followed by C symbol from nm. + AC_MSG_CHECKING([command to parse $NM output]) + AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [dnl + + # These are sane defaults that work on at least a few old systems. + # [They come from Ultrix. What could be older than Ultrix?!! ;)] + + # Character class describing NM global symbol codes. + symcode='[[BCDEGRST]]' + + # Regexp to match symbols that can be accessed directly from C. + sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' + + # Transform the above into a raw symbol and a C symbol. + symxfrm='\1 \2\3 \3' + + # Transform an extracted symbol line into a proper C declaration + lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" + + # Transform an extracted symbol line into symbol name and symbol address + lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + + # Define system-specific variables. + case $host_os in + aix*) + symcode='[[BCDT]]' + ;; + cygwin* | mingw* | pw32*) + symcode='[[ABCDGISTW]]' + ;; + hpux*) # Its linker distinguishes data from code symbols + lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + ;; + irix*) + symcode='[[BCDEGRST]]' + ;; + solaris* | sysv5*) + symcode='[[BDT]]' + ;; + sysv4) + symcode='[[DFNSTU]]' + ;; + esac + + # Handle CRLF in mingw tool chain + opt_cr= + case $host_os in + mingw*) + opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; + esac + + # If we're using GNU nm, then use its standard symbol codes. + if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then + symcode='[[ABCDGISTW]]' + fi + + # Try without a prefix undercore, then with it. + for ac_symprfx in "" "_"; do + + # Write the raw and C identifiers. + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" + + # Check to see that the pipe works correctly. + pipe_works=no + rm -f conftest* + cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if egrep ' nm_test_var$' "$nlist" >/dev/null; then + if egrep ' nm_test_func$' "$nlist" >/dev/null; then + cat < conftest.$ac_ext + #ifdef __cplusplus + extern "C" { + #endif + + EOF + # Now generate the symbol file. + eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext' + + cat <> conftest.$ac_ext + #if defined (__STDC__) && __STDC__ + # define lt_ptr void * + #else + # define lt_ptr char * + # define const + #endif + + /* The mapping between symbol names and symbols. */ + const struct { + const char *name; + lt_ptr address; + } + lt_preloaded_symbols[[]] = + { + EOF + sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext + cat <<\EOF >> conftest.$ac_ext + {0, (lt_ptr) 0} + }; + + #ifdef __cplusplus + } + #endif + EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + save_LIBS="$LIBS" + save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$no_builtin_flag" + if AC_TRY_EVAL(ac_link) && test -s conftest; then + pipe_works=yes + fi + LIBS="$save_LIBS" + CFLAGS="$save_CFLAGS" + else + echo "cannot find nm_test_func in $nlist" >&AC_FD_CC + fi + else + echo "cannot find nm_test_var in $nlist" >&AC_FD_CC + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AC_FD_CC + fi + else + echo "$progname: failed program was:" >&AC_FD_CC + cat conftest.$ac_ext >&5 + fi + rm -f conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi + done + ]) + global_symbol_pipe="$lt_cv_sys_global_symbol_pipe" + if test -z "$lt_cv_sys_global_symbol_pipe"; then + global_symbol_to_cdecl= + global_symbol_to_c_name_address= + else + global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl" + global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address" + fi + if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address"; + then + AC_MSG_RESULT(failed) + else + AC_MSG_RESULT(ok) + fi + ]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE + + # _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR + # --------------------------------- + AC_DEFUN([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR], + [# Find the correct PATH separator. Usually this is `:', but + # DJGPP uses `;' like DOS. + if test "X${PATH_SEPARATOR+set}" != Xset; then + UNAME=${UNAME-`uname 2>/dev/null`} + case X$UNAME in + *-DOS) lt_cv_sys_path_separator=';' ;; + *) lt_cv_sys_path_separator=':' ;; + esac + PATH_SEPARATOR=$lt_cv_sys_path_separator + fi + ])# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR + + # _LT_AC_PROG_ECHO_BACKSLASH + # -------------------------- + # Add some code to the start of the generated configure script which + # will find an echo command which doesn't interpret backslashes. + AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], + [ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], + [AC_DIVERT_PUSH(NOTICE)]) + _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR + + # Check that we are running under the correct shell. + SHELL=${CONFIG_SHELL-/bin/sh} + + case X$ECHO in + X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` + ;; + esac + + echo=${ECHO-echo} + if test "X[$]1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift + elif test "X[$]1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : + elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then + # Yippee, $echo works! + : + else + # Restart under the correct shell. + exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} + fi + + if test "X[$]1" = X--fallback-echo; then + # used as fallback echo + shift + cat </dev/null && + echo_test_string="`eval $cmd`" && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null + then + break + fi + done + fi + + if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : + else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$dir/echo" + break + fi + done + IFS="$save_ifs" + + if test "X$echo" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + echo='print -r' + elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} + else + # Try using printf. + echo='printf %s\n' + if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + echo="$CONFIG_SHELL [$]0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$CONFIG_SHELL [$]0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do + if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "[$]0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} + else + # Oops. We lost completely, so just stick with echo. + echo=echo + fi + fi + fi + fi + fi + fi + + # Copy echo and quote the copy suitably for passing to libtool from + # the Makefile, instead of quoting the original, which is used later. + ECHO=$echo + if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then + ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" + fi + + AC_SUBST(ECHO) + AC_DIVERT_POP + ])# _LT_AC_PROG_ECHO_BACKSLASH + + # _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, + # ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) + # ------------------------------------------------------------------ + AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], + [if test "$cross_compiling" = yes; then : + [$4] + else + AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < + #endif + + #include + + #ifdef RTLD_GLOBAL + # define LT_DLGLOBAL RTLD_GLOBAL + #else + # ifdef DL_GLOBAL + # define LT_DLGLOBAL DL_GLOBAL + # else + # define LT_DLGLOBAL 0 + # endif + #endif + + /* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ + #ifndef LT_DLLAZY_OR_NOW + # ifdef RTLD_LAZY + # define LT_DLLAZY_OR_NOW RTLD_LAZY + # else + # ifdef DL_LAZY + # define LT_DLLAZY_OR_NOW DL_LAZY + # else + # ifdef RTLD_NOW + # define LT_DLLAZY_OR_NOW RTLD_NOW + # else + # ifdef DL_NOW + # define LT_DLLAZY_OR_NOW DL_NOW + # else + # define LT_DLLAZY_OR_NOW 0 + # endif + # endif + # endif + # endif + #endif + + #ifdef __cplusplus + extern "C" void exit (int); + #endif + + void fnord() { int i=42;} + int main () + { + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + + exit (status); + }] + EOF + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) $1 ;; + x$lt_dlneed_uscore) $2 ;; + x$lt_unknown|x*) $3 ;; + esac + else : + # compilation failed + $3 + fi + fi + rm -fr conftest* + ])# _LT_AC_TRY_DLOPEN_SELF + + # AC_LIBTOOL_DLOPEN_SELF + # ------------------- + AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], + [if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown + else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + cygwin* | mingw* | pw32*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + *) + AC_CHECK_FUNC([shl_load], + [lt_cv_dlopen="shl_load"], + [AC_CHECK_LIB([dld], [shl_load], + [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], + [AC_CHECK_FUNC([dlopen], + [lt_cv_dlopen="dlopen"], + [AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], + [AC_CHECK_LIB([svld], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], + [AC_CHECK_LIB([dld], [dld_link], + [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) + ]) + ]) + ]) + ]) + ]) + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + AC_CACHE_CHECK([whether a program can dlopen itself], + lt_cv_dlopen_self, [dnl + _LT_AC_TRY_DLOPEN_SELF( + lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, + lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) + ]) + + if test "x$lt_cv_dlopen_self" = xyes; then + LDFLAGS="$LDFLAGS $link_static_flag" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], + lt_cv_dlopen_self_static, [dnl + _LT_AC_TRY_DLOPEN_SELF( + lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, + lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) + ]) + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac + fi + ])# AC_LIBTOOL_DLOPEN_SELF + + AC_DEFUN([_LT_AC_LTCONFIG_HACK], + [AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])dnl + # Sed substitution that helps us do robust quoting. It backslashifies + # metacharacters that are still active within double-quoted strings. + Xsed='sed -e s/^X//' + sed_quote_subst='s/\([[\\"\\`$\\\\]]\)/\\\1/g' + + # Same as above, but do not quote variable references. + double_quote_subst='s/\([[\\"\\`\\\\]]\)/\\\1/g' + + # Sed substitution to delay expansion of an escaped shell variable in a + # double_quote_subst'ed string. + delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + + # Constants: + rm="rm -f" + + # Global variables: + default_ofile=libtool + can_build_shared=yes + + # All known linkers require a `.a' archive for static linking (except M$VC, + # which needs '.lib'). + libext=a + ltmain="$ac_aux_dir/ltmain.sh" + ofile="$default_ofile" + with_gnu_ld="$lt_cv_prog_gnu_ld" + need_locks="$enable_libtool_lock" + + old_CC="$CC" + old_CFLAGS="$CFLAGS" + + # Set sane defaults for various variables + test -z "$AR" && AR=ar + test -z "$AR_FLAGS" && AR_FLAGS=cru + test -z "$AS" && AS=as + test -z "$CC" && CC=cc + test -z "$DLLTOOL" && DLLTOOL=dlltool + test -z "$LD" && LD=ld + test -z "$LN_S" && LN_S="ln -s" + test -z "$MAGIC_CMD" && MAGIC_CMD=file + test -z "$NM" && NM=nm + test -z "$OBJDUMP" && OBJDUMP=objdump + test -z "$RANLIB" && RANLIB=: + test -z "$STRIP" && STRIP=: + test -z "$ac_objext" && ac_objext=o + + if test x"$host" != x"$build"; then + ac_tool_prefix=${host_alias}- + else + ac_tool_prefix= + fi + + # Transform linux* to *-*-linux-gnu*, to support old configure scripts. + case $host_os in + linux-gnu*) ;; + linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` + esac + + case $host_os in + aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; + esac + + # Determine commands to create old-style static archives. + old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' + old_postinstall_cmds='chmod 644 $oldlib' + old_postuninstall_cmds= + + if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" + ;; + *) + old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" + fi + + # Allow CC to be a program name with arguments. + set dummy $CC + compiler="[$]2" + + AC_MSG_CHECKING([for objdir]) + rm -f .libs 2>/dev/null + mkdir .libs 2>/dev/null + if test -d .libs; then + objdir=.libs + else + # MS-DOS does not allow filenames that begin with a dot. + objdir=_libs + fi + rmdir .libs 2>/dev/null + AC_MSG_RESULT($objdir) + + + AC_ARG_WITH(pic, + [ --with-pic try to use only PIC/non-PIC objects [default=use both]], + pic_mode="$withval", pic_mode=default) + test -z "$pic_mode" && pic_mode=default + + # We assume here that the value for lt_cv_prog_cc_pic will not be cached + # in isolation, and that seeing it set (from the cache) indicates that + # the associated values are set (in the cache) correctly too. + AC_MSG_CHECKING([for $compiler option to produce PIC]) + AC_CACHE_VAL(lt_cv_prog_cc_pic, + [ lt_cv_prog_cc_pic= + lt_cv_prog_cc_shlib= + lt_cv_prog_cc_wl= + lt_cv_prog_cc_static= + lt_cv_prog_cc_no_builtin= + lt_cv_prog_cc_can_build_shared=$can_build_shared + + if test "$GCC" = yes; then + lt_cv_prog_cc_wl='-Wl,' + lt_cv_prog_cc_static='-static' + + case $host_os in + aix*) + # Below there is a dirty hack to force normal static linking with -ldl + # The problem is because libdl dynamically linked with both libc and + # libC (AIX C++ library), which obviously doesn't included in libraries + # list by gcc. This cause undefined symbols with -static flags. + # This hack allows C programs to be linked with "-static -ldl", but + # not sure about C++ programs. + lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC" + ;; + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4' + ;; + beos* | irix5* | irix6* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_cv_prog_cc_pic='-fno-common' + ;; + cygwin* | mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_cv_prog_cc_pic='-DDLL_EXPORT' + ;; + sysv4*MP*) + if test -d /usr/nec; then + lt_cv_prog_cc_pic=-Kconform_pic + fi + ;; + *) + lt_cv_prog_cc_pic='-fPIC' + ;; + esac + else + # PORTME Check for PIC flags for the system compiler. + case $host_os in + aix3* | aix4* | aix5*) + lt_cv_prog_cc_wl='-Wl,' + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_cv_prog_cc_static='-Bstatic' + else + lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + hpux9* | hpux10* | hpux11*) + # Is there a better lt_cv_prog_cc_static that works with the bundled CC? + lt_cv_prog_cc_wl='-Wl,' + lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive" + lt_cv_prog_cc_pic='+Z' + ;; + + irix5* | irix6*) + lt_cv_prog_cc_wl='-Wl,' + lt_cv_prog_cc_static='-non_shared' + # PIC (with -KPIC) is the default. + ;; + + cygwin* | mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_cv_prog_cc_pic='-DDLL_EXPORT' + ;; + + newsos6) + lt_cv_prog_cc_pic='-KPIC' + lt_cv_prog_cc_static='-Bstatic' + ;; + + osf3* | osf4* | osf5*) + # All OSF/1 code is PIC. + lt_cv_prog_cc_wl='-Wl,' + lt_cv_prog_cc_static='-non_shared' + ;; + + sco3.2v5*) + lt_cv_prog_cc_pic='-Kpic' + lt_cv_prog_cc_static='-dn' + lt_cv_prog_cc_shlib='-belf' + ;; + + solaris*) + lt_cv_prog_cc_pic='-KPIC' + lt_cv_prog_cc_static='-Bstatic' + lt_cv_prog_cc_wl='-Wl,' + ;; + + sunos4*) + lt_cv_prog_cc_pic='-PIC' + lt_cv_prog_cc_static='-Bstatic' + lt_cv_prog_cc_wl='-Qoption ld ' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + lt_cv_prog_cc_pic='-KPIC' + lt_cv_prog_cc_static='-Bstatic' + if test "x$host_vendor" = xsni; then + lt_cv_prog_cc_wl='-LD' + else + lt_cv_prog_cc_wl='-Wl,' + fi + ;; + + uts4*) + lt_cv_prog_cc_pic='-pic' + lt_cv_prog_cc_static='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + lt_cv_prog_cc_pic='-Kconform_pic' + lt_cv_prog_cc_static='-Bstatic' + fi + ;; + + *) + lt_cv_prog_cc_can_build_shared=no + ;; + esac + fi + ]) + if test -z "$lt_cv_prog_cc_pic"; then + AC_MSG_RESULT([none]) + else + AC_MSG_RESULT([$lt_cv_prog_cc_pic]) + + # Check to make sure the pic_flag actually works. + AC_MSG_CHECKING([if $compiler PIC flag $lt_cv_prog_cc_pic works]) + AC_CACHE_VAL(lt_cv_prog_cc_pic_works, [dnl + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC" + AC_TRY_COMPILE([], [], [dnl + case $host_os in + hpux9* | hpux10* | hpux11*) + # On HP-UX, both CC and GCC only warn that PIC is supported... then + # they create non-PIC objects. So, if there were any warnings, we + # assume that PIC is not supported. + if test -s conftest.err; then + lt_cv_prog_cc_pic_works=no + else + lt_cv_prog_cc_pic_works=yes + fi + ;; + *) + lt_cv_prog_cc_pic_works=yes + ;; + esac + ], [dnl + lt_cv_prog_cc_pic_works=no + ]) + CFLAGS="$save_CFLAGS" + ]) + + if test "X$lt_cv_prog_cc_pic_works" = Xno; then + lt_cv_prog_cc_pic= + lt_cv_prog_cc_can_build_shared=no + else + lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic" + fi + + AC_MSG_RESULT([$lt_cv_prog_cc_pic_works]) + fi + + # Check for any special shared library compilation flags. + if test -n "$lt_cv_prog_cc_shlib"; then + AC_MSG_WARN([\`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries]) + if echo "$old_CC $old_CFLAGS " | egrep -e "[[ ]]$lt_cv_prog_cc_shlib[[ ]]" >/dev/null; then : + else + AC_MSG_WARN([add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure]) + lt_cv_prog_cc_can_build_shared=no + fi + fi + + AC_MSG_CHECKING([if $compiler static flag $lt_cv_prog_cc_static works]) + AC_CACHE_VAL([lt_cv_prog_cc_static_works], [dnl + lt_cv_prog_cc_static_works=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static" + AC_TRY_LINK([], [], [lt_cv_prog_cc_static_works=yes]) + LDFLAGS="$save_LDFLAGS" + ]) + + # Belt *and* braces to stop my trousers falling down: + test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static= + AC_MSG_RESULT([$lt_cv_prog_cc_static_works]) + + pic_flag="$lt_cv_prog_cc_pic" + special_shlib_compile_flags="$lt_cv_prog_cc_shlib" + wl="$lt_cv_prog_cc_wl" + link_static_flag="$lt_cv_prog_cc_static" + no_builtin_flag="$lt_cv_prog_cc_no_builtin" + can_build_shared="$lt_cv_prog_cc_can_build_shared" + + + # Check to see if options -o and -c are simultaneously supported by compiler + AC_MSG_CHECKING([if $compiler supports -c -o file.$ac_objext]) + AC_CACHE_VAL([lt_cv_compiler_c_o], [ + $rm -r conftest 2>/dev/null + mkdir conftest + cd conftest + echo "int some_variable = 0;" > conftest.$ac_ext + mkdir out + # According to Tom Tromey, Ian Lance Taylor reported there are C compilers + # that will create temporary files in the current directory regardless of + # the output directory. Thus, making CWD read-only will cause this test + # to fail, enabling locking or at least warning the user not to do parallel + # builds. + chmod -w . + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" + compiler_c_o=no + if { (eval echo configure:__oline__: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s out/conftest.err; then + lt_cv_compiler_c_o=no + else + lt_cv_compiler_c_o=yes + fi + else + # Append any errors to the config.log. + cat out/conftest.err 1>&AC_FD_CC + lt_cv_compiler_c_o=no + fi + CFLAGS="$save_CFLAGS" + chmod u+w . + $rm conftest* out/* + rmdir out + cd .. + rmdir conftest + $rm -r conftest 2>/dev/null + ]) + compiler_c_o=$lt_cv_compiler_c_o + AC_MSG_RESULT([$compiler_c_o]) + + if test x"$compiler_c_o" = x"yes"; then + # Check to see if we can write to a .lo + AC_MSG_CHECKING([if $compiler supports -c -o file.lo]) + AC_CACHE_VAL([lt_cv_compiler_o_lo], [ + lt_cv_compiler_o_lo=no + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -c -o conftest.lo" + save_objext="$ac_objext" + ac_objext=lo + AC_TRY_COMPILE([], [int some_variable = 0;], [dnl + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + lt_cv_compiler_o_lo=no + else + lt_cv_compiler_o_lo=yes + fi + ]) + ac_objext="$save_objext" + CFLAGS="$save_CFLAGS" + ]) + compiler_o_lo=$lt_cv_compiler_o_lo + AC_MSG_RESULT([$compiler_o_lo]) + else + compiler_o_lo=no + fi + + # Check to see if we can do hard links to lock some files if needed + hard_links="nottested" + if test "$compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + AC_MSG_CHECKING([if we can lock with hard links]) + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + AC_MSG_RESULT([$hard_links]) + if test "$hard_links" = no; then + AC_MSG_WARN([\`$CC' does not support \`-c -o', so \`make -j' may be unsafe]) + need_locks=warn + fi + else + need_locks=no + fi + + if test "$GCC" = yes; then + # Check to see if options -fno-rtti -fno-exceptions are supported by compiler + AC_MSG_CHECKING([if $compiler supports -fno-rtti -fno-exceptions]) + echo "int some_variable = 0;" > conftest.$ac_ext + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext" + compiler_rtti_exceptions=no + AC_TRY_COMPILE([], [int some_variable = 0;], [dnl + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + compiler_rtti_exceptions=no + else + compiler_rtti_exceptions=yes + fi + ]) + CFLAGS="$save_CFLAGS" + AC_MSG_RESULT([$compiler_rtti_exceptions]) + + if test "$compiler_rtti_exceptions" = "yes"; then + no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' + else + no_builtin_flag=' -fno-builtin' + fi + fi + + # See if the linker supports building shared libraries. + AC_MSG_CHECKING([whether the linker ($LD) supports shared libraries]) + + allow_undefined_flag= + no_undefined_flag= + need_lib_prefix=unknown + need_version=unknown + # when you set need_version to no, make sure it does not cause -set_version + # flags to be left without arguments + archive_cmds= + archive_expsym_cmds= + old_archive_from_new_cmds= + old_archive_from_expsyms_cmds= + export_dynamic_flag_spec= + use_runtimelinking= + whole_archive_flag_spec= + thread_safe_flag_spec= + hardcode_into_libs=no + hardcode_libdir_flag_spec= + hardcode_libdir_separator= + hardcode_direct=no + hardcode_minus_L=no + hardcode_shlibpath_var=unsupported + runpath_var= + link_all_deplibs=unknown + always_export_symbols=no + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms= + # exclude_expsyms can be an egrep regular expression of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + exclude_expsyms="_GLOBAL_OFFSET_TABLE_" + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + ld_shlibs=yes + if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # See if GNU ld supports shared libraries. + case $host_os in + aix3* | aix4* | aix5*) + # On AIX, the GNU linker is very broken + # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available. + ld_shlibs=no + cat <&2 + + *** Warning: the GNU linker, at least up to release 2.9.1, is reported + *** to be unable to reliably create shared libraries on AIX. + *** Therefore, libtool is disabling shared libraries support. If you + *** really care for shared libraries, you may want to modify your PATH + *** so that a non-GNU linker is found, and then restart. + + EOF + ;; + + amigaos*) + archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + + # Samuel A. Falvo II reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can use + # them. + ld_shlibs=no + ;; + + beos*) + if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; + + cygwin* | mingw* | pw32*) + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + allow_undefined_flag=unsupported + always_export_symbols=yes + + extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ + sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ + test -f $output_objdir/impgen.exe || (cd $output_objdir && \ + if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ + else $CC -o impgen impgen.c ; fi)~ + $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' + + old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' + + # cygwin and mingw dlls have different entry points and sets of symbols + # to exclude. + # FIXME: what about values for MSVC? + dll_entry=__cygwin_dll_entry@12 + dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ + case $host_os in + mingw*) + # mingw values + dll_entry=_DllMainCRTStartup@12 + dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ + ;; + esac + + # mingw and cygwin differ, and it's simplest to just exclude the union + # of the two symbol sets. + dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 + + # recent cygwin and mingw systems supply a stub DllMain which the user + # can override, but on older systems we have to supply one (in ltdll.c) + if test "x$lt_cv_need_dllmain" = "xyes"; then + ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " + ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~ + test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' + else + ltdll_obj= + ltdll_cmds= + fi + + # Extract the symbol export list from an `--export-all' def file, + # then regenerate the def file from the symbol export list, so that + # the compiled dll only exports the symbol export list. + # Be careful not to strip the DATA tag left be newer dlltools. + export_symbols_cmds="$ltdll_cmds"' + $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ + sed -e "1,/EXPORTS/d" -e "s/ @ [[0-9]]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' + + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is. + # If DATA tags from a recent dlltool are present, honour them! + archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname-def; + else + echo EXPORTS > $output_objdir/$soname-def; + _lt_hint=1; + cat $export_symbols | while read symbol; do + set dummy \$symbol; + case \[$]# in + 2) echo " \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; + *) echo " \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;; + esac; + _lt_hint=`expr 1 + \$_lt_hint`; + done; + fi~ + '"$ltdll_cmds"' + $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ + $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ + $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ + $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ + $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris* | sysv5*) + if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <&2 + + *** Warning: The releases 2.8.* of the GNU linker cannot reliably + *** create shared libraries on Solaris systems. Therefore, libtool + *** is disabling shared libraries support. We urge you to upgrade GNU + *** binutils to release 2.9.1 or newer. Another option is to modify + *** your PATH or compiler configuration so that the native linker is + *** used, and then restart. + + EOF + elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + *) + if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + + if test "$ld_shlibs" = yes; then + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec='${wl}--export-dynamic' + case $host_os in + cygwin* | mingw* | pw32*) + # dlltool doesn't understand --whole-archive et. al. + whole_archive_flag_spec= + ;; + *) + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec= + fi + ;; + esac + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes && test -z "$link_static_flag"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + use_runtimelinking="" + else + aix_use_runtimelinking=yes + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + use_runtimelinking='-brtl' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + hardcode_direct=yes + archive_cmds='' + hardcode_libdir_separator=':' + if test "$GCC" = yes; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + hardcode_direct=yes + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + esac + + shared_flag='-shared' + else + # not using gcc + shared_flag='${wl}-G' + fi + + # It seems that -bexpall can do strange things, so it is better to + # generate a list of symbols to export. + always_export_symbols=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='-berok' + hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib' + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $output_objdir/$libname$release.a $output_objdir/$soname' + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib' + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='${wl}-berok' + # This is a bit strange, but is similar to how AIX traditionally builds + # it's shared libraries. + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + # see comment about different semantics on the GNU ld section + ld_shlibs=no + ;; + + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + ;; + + darwin* | rhapsody*) + case "$host_os" in + rhapsody* | darwin1.[[012]]) + allow_undefined_flag='-undefined suppress' + ;; + *) # Darwin 1.3 on + allow_undefined_flag='-flat_namespace -undefined suppress' + ;; + esac + # FIXME: Relying on posixy $() will cause problems for + # cross-compilation, but unfortunately the echo tests do not + # yet detect zsh echo's removal of \ escapes. + archive_cmds='$nonopt $(test "x$module" = xyes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring' + # We need to add '_' to the symbols in $export_symbols first + #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols' + hardcode_direct=yes + hardcode_shlibpath_var=no + whole_archive_flag_spec='-all_load $convenience' + ;; + + freebsd1*) + ld_shlibs=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd*) + archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + hpux9* | hpux10* | hpux11*) + case $host_os in + hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; + *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;; + esac + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + hardcode_minus_L=yes # Not in the search PATH, but as the default + # location of the library. + export_dynamic_flag_spec='${wl}-E' + ;; + + irix5* | irix6*) + if test "$GCC" = yes; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + link_all_deplibs=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + newsos6) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_shlibpath_var=no + ;; + + openbsd*) + hardcode_direct=yes + hardcode_shlibpath_var=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + else + case "$host_os" in + openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' + + #Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + hardcode_libdir_separator=: + ;; + + sco3.2v5*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + export_dynamic_flag_spec='${wl}-Bexport' + ;; + + solaris*) + # gcc --version < 3.0 without binutils cannot create self contained + # shared libraries reliably, requiring libgcc.a to resolve some of + # the object symbols generated in some cases. Libraries that use + # assert need libgcc.a to resolve __eprintf, for example. Linking + # a copy of libgcc.a into every shared library to guarantee resolving + # such symbols causes other problems: According to Tim Van Holder + # , C++ libraries end up with a separate + # (to the application) exception stack for one thing. + no_undefined_flag=' -z defs' + if test "$GCC" = yes; then + case `$CC --version 2>/dev/null` in + [[12]].*) + cat <&2 + + *** Warning: Releases of GCC earlier than version 3.0 cannot reliably + *** create self contained shared libraries on Solaris systems, without + *** introducing a dependency on libgcc.a. Therefore, libtool is disabling + *** -no-undefined support, which will at least allow you to build shared + *** libraries. However, you may find that when you link such libraries + *** into an application without using GCC, you have to manually add + *** \`gcc --print-libgcc-file-name\` to the link command. We urge you to + *** upgrade to a newer version of GCC. Another option is to rebuild your + *** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer. + + EOF + no_undefined_flag= + ;; + esac + fi + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) # Supported since Solaris 2.6 (maybe 2.5.1?) + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; + esac + link_all_deplibs=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + sysv4) + if test "x$host_vendor" = xsno; then + archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes # is this really true??? + else + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + fi + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; + + sysv5*) + no_undefined_flag=' -z text' + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + hardcode_libdir_flag_spec= + hardcode_shlibpath_var=no + runpath_var='LD_RUN_PATH' + ;; + + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs=yes + fi + ;; + + sysv4.2uw2*) + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=no + hardcode_shlibpath_var=no + hardcode_runpath_var=yes + runpath_var=LD_RUN_PATH + ;; + + sysv5uw7* | unixware7*) + no_undefined_flag='${wl}-z ${wl}text' + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + *) + ld_shlibs=no + ;; + esac + fi + AC_MSG_RESULT([$ld_shlibs]) + test "$ld_shlibs" = no && can_build_shared=no + + # Check hardcoding attributes. + AC_MSG_CHECKING([how to hardcode library paths into programs]) + hardcode_action= + if test -n "$hardcode_libdir_flag_spec" || \ + test -n "$runpath_var"; then + + # We can hardcode non-existant directories. + if test "$hardcode_direct" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$hardcode_shlibpath_var" != no && + test "$hardcode_minus_L" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate + fi + else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported + fi + AC_MSG_RESULT([$hardcode_action]) + + striplib= + old_striplib= + AC_MSG_CHECKING([whether stripping libraries is possible]) + if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + fi + + reload_cmds='$LD$reload_flag -o $output$reload_objs' + test -z "$deplibs_check_method" && deplibs_check_method=unknown + + # PORTME Fill in your ld.so characteristics + AC_MSG_CHECKING([dynamic linker characteristics]) + library_names_spec= + libname_spec='lib$name' + soname_spec= + postinstall_cmds= + postuninstall_cmds= + finish_cmds= + finish_eval= + shlibpath_var= + shlibpath_overrides_runpath=unknown + version_type=none + dynamic_linker="$host_os ld.so" + sys_lib_dlsearch_path_spec="/lib /usr/lib" + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + + case $host_os in + aix3*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}.so$major' + ;; + + aix4* | aix5*) + version_type=linux + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[[01]] | aix4.[[01]].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # We preserve .a as extension for shared libraries through AIX4.2 + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LIBPATH + hardcode_into_libs=yes + fi + ;; + + amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' + ;; + + beos*) + library_names_spec='${libname}.so' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + + bsdi4*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + export_dynamic_flag_spec=-rdynamic + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + + cygwin* | mingw* | pw32*) + version_type=windows + need_version=no + need_lib_prefix=no + case $GCC,$host_os in + yes,cygwin*) + library_names_spec='$libname.dll.a' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll' + postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog .libs/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + ;; + yes,mingw*) + library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"` + ;; + yes,pw32*) + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' + ;; + *) + library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + + darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + # FIXME: Relying on posixy $() will cause problems for + # cross-compilation, but unfortunately the echo tests do not + # yet detect zsh echo's removal of \ escapes. + library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' + soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + ;; + + freebsd1*) + dynamic_linker=no + ;; + + freebsd*) + objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + *) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + esac + ;; + + gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + + hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + dynamic_linker="$host_os dld.sl" + version_type=sunos + need_lib_prefix=no + need_version=no + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' + soname_spec='${libname}${release}.sl$major' + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + + irix5* | irix6*) + version_type=irix + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}.so$major' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' + case $host_os in + irix5*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + ;; + + # No shared lib support for Linux oldld, aout, or coff. + linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) + dynamic_linker=no + ;; + + # This must be Linux ELF. + linux-gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + + netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' + soname_spec='${libname}${release}.so$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + + newsos6) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + + openbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case "$host_os" in + openbsd2.[[89]] | openbsd2.[[89]].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + ;; + + os2*) + libname_spec='$name' + need_lib_prefix=no + library_names_spec='$libname.dll $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + + osf3* | osf4* | osf5*) + version_type=osf + need_version=no + soname_spec='${libname}${release}.so' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + + sco3.2v5*) + version_type=osf + soname_spec='${libname}${release}.so$major' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + shlibpath_var=LD_LIBRARY_PATH + ;; + + solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + + sunos4*) + version_type=sunos + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + + uts4*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + + dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' + soname_spec='$libname.so.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + + *) + dynamic_linker=no + ;; + esac + AC_MSG_RESULT([$dynamic_linker]) + test "$dynamic_linker" = no && can_build_shared=no + + # Report the final consequences. + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case "$host_os" in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix4* | aix5*) + if test "$host_cpu" != ia64 ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + if test "$hardcode_action" = relink; then + # Fast installation is not supported + enable_fast_install=no + elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless + fi + + variables_saved_for_relink="PATH $shlibpath_var $runpath_var" + if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" + fi + + AC_LIBTOOL_DLOPEN_SELF + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + AC_MSG_CHECKING([whether -lc should be explicitly linked in]) + AC_CACHE_VAL([lt_cv_archive_cmds_need_lc], + [$rm conftest* + echo 'static int dummy;' > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile); then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_cv_prog_cc_wl + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if AC_TRY_EVAL(archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) + then + lt_cv_archive_cmds_need_lc=no + else + lt_cv_archive_cmds_need_lc=yes + fi + allow_undefined_flag=$save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi]) + AC_MSG_RESULT([$lt_cv_archive_cmds_need_lc]) + ;; + esac + fi + need_lc=${lt_cv_archive_cmds_need_lc-yes} + + # The second clause should only fire when bootstrapping the + # libtool distribution, otherwise you forgot to ship ltmain.sh + # with your package, and you will get complaints that there are + # no rules to generate ltmain.sh. + if test -f "$ltmain"; then + : + else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + test -f Makefile && make "$ltmain" + fi + + if test -f "$ltmain"; then + trap "$rm \"${ofile}T\"; exit 1" 1 2 15 + $rm -f "${ofile}T" + + echo creating $ofile + + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. + for var in echo old_CC old_CFLAGS \ + AR AR_FLAGS CC LD LN_S NM SHELL \ + reload_flag reload_cmds wl \ + pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ + use_runtimelinking \ + thread_safe_flag_spec whole_archive_flag_spec libname_spec \ + library_names_spec soname_spec \ + RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ + old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \ + postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \ + old_striplib striplib file_magic_cmd export_symbols_cmds \ + deplibs_check_method allow_undefined_flag no_undefined_flag \ + finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ + global_symbol_to_c_name_address \ + hardcode_libdir_flag_spec hardcode_libdir_separator \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do + + case $var in + reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ + extract_expsyms_cmds | old_archive_from_expsyms_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done + + cat <<__EOF__ > "${ofile}T" + #! $SHELL + + # `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. + # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) + # NOTE: Changes made to this file will be lost: look at ltmain.sh. + # + # Copyright (C) 1996-2000 Free Software Foundation, Inc. + # Originally by Gordon Matzigkeit , 1996 + # + # This program is free software; you can redistribute it and/or modify + # it under the terms of the GNU General Public License as published by + # the Free Software Foundation; either version 2 of the License, or + # (at your option) any later version. + # + # This program is distributed in the hope that it will be useful, but + # WITHOUT ANY WARRANTY; without even the implied warranty of + # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + # General Public License for more details. + # + # You should have received a copy of the GNU General Public License + # along with this program; if not, write to the Free Software + # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + # + # As a special exception to the GNU General Public License, if you + # distribute this file as part of a program that contains a + # configuration script generated by Autoconf, you may include it under + # the same distribution terms that you use for the rest of that program. + + # Sed that helps us avoid accidentally triggering echo(1) options like -n. + Xsed="sed -e s/^X//" + + # The HP-UX ksh and POSIX shell print the target directory to stdout + # if CDPATH is set. + if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi + + # ### BEGIN LIBTOOL CONFIG + + # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + + # Shell to use when invoking shell scripts. + SHELL=$lt_SHELL + + # Whether or not to build shared libraries. + build_libtool_libs=$enable_shared + + # Whether or not to build static libraries. + build_old_libs=$enable_static + + # Whether or not to add -lc for building shared libraries. + build_libtool_need_lc=$need_lc + + # Whether or not to optimize for fast installation. + fast_install=$enable_fast_install + + # The host system. + host_alias=$host_alias + host=$host + + # An echo program that does not interpret backslashes. + echo=$lt_echo + + # The archiver. + AR=$lt_AR + AR_FLAGS=$lt_AR_FLAGS + + # The default C compiler. + CC=$lt_CC + + # Is the compiler the GNU C compiler? + with_gcc=$GCC + + # The linker used to build libraries. + LD=$lt_LD + + # Whether we need hard or soft links. + LN_S=$lt_LN_S + + # A BSD-compatible nm program. + NM=$lt_NM + + # A symbol stripping program + STRIP=$STRIP + + # Used to examine libraries when file_magic_cmd begins "file" + MAGIC_CMD=$MAGIC_CMD + + # Used on cygwin: DLL creation program. + DLLTOOL="$DLLTOOL" + + # Used on cygwin: object dumper. + OBJDUMP="$OBJDUMP" + + # Used on cygwin: assembler. + AS="$AS" + + # The name of the directory that contains temporary libtool files. + objdir=$objdir + + # How to create reloadable object files. + reload_flag=$lt_reload_flag + reload_cmds=$lt_reload_cmds + + # How to pass a linker flag through the compiler. + wl=$lt_wl + + # Object file suffix (normally "o"). + objext="$ac_objext" + + # Old archive suffix (normally "a"). + libext="$libext" + + # Executable file suffix (normally ""). + exeext="$exeext" + + # Additional compiler flags for building library objects. + pic_flag=$lt_pic_flag + pic_mode=$pic_mode + + # Does compiler simultaneously support -c and -o options? + compiler_c_o=$lt_compiler_c_o + + # Can we write directly to a .lo ? + compiler_o_lo=$lt_compiler_o_lo + + # Must we lock files when doing compilation ? + need_locks=$lt_need_locks + + # Do we need the lib prefix for modules? + need_lib_prefix=$need_lib_prefix + + # Do we need a version for libraries? + need_version=$need_version + + # Whether dlopen is supported. + dlopen_support=$enable_dlopen + + # Whether dlopen of programs is supported. + dlopen_self=$enable_dlopen_self + + # Whether dlopen of statically linked programs is supported. + dlopen_self_static=$enable_dlopen_self_static + + # Compiler flag to prevent dynamic linking. + link_static_flag=$lt_link_static_flag + + # Compiler flag to turn off builtin functions. + no_builtin_flag=$lt_no_builtin_flag + + # Compiler flag to allow reflexive dlopens. + export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + + # Compiler flag to allow runtime linking + use_runtimelinking=$lt_use_runtimelinking + + # Compiler flag to generate shared objects directly from archives. + whole_archive_flag_spec=$lt_whole_archive_flag_spec + + # Compiler flag to generate thread-safe objects. + thread_safe_flag_spec=$lt_thread_safe_flag_spec + + # Library versioning type. + version_type=$version_type + + # Format of library name prefix. + libname_spec=$lt_libname_spec + + # List of archive names. First name is the real one, the rest are links. + # The last name is the one that the linker finds with -lNAME. + library_names_spec=$lt_library_names_spec + + # The coded name of the library, if different from the real name. + soname_spec=$lt_soname_spec + + # Commands used to build and install an old-style archive. + RANLIB=$lt_RANLIB + old_archive_cmds=$lt_old_archive_cmds + old_postinstall_cmds=$lt_old_postinstall_cmds + old_postuninstall_cmds=$lt_old_postuninstall_cmds + + # Create an old-style archive from a shared archive. + old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + + # Create a temporary old-style archive to link instead of a shared archive. + old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + + # Commands used to build and install a shared archive. + archive_cmds=$lt_archive_cmds + archive_expsym_cmds=$lt_archive_expsym_cmds + postinstall_cmds=$lt_postinstall_cmds + postuninstall_cmds=$lt_postuninstall_cmds + + # Commands to strip libraries. + old_striplib=$lt_old_striplib + striplib=$lt_striplib + + # Method to check whether dependent libraries are shared objects. + deplibs_check_method=$lt_deplibs_check_method + + # Command to use when deplibs_check_method == file_magic. + file_magic_cmd=$lt_file_magic_cmd + + # Flag that allows shared libraries with undefined symbols to be built. + allow_undefined_flag=$lt_allow_undefined_flag + + # Flag that forces no undefined symbols. + no_undefined_flag=$lt_no_undefined_flag + + # Commands used to finish a libtool library installation in a directory. + finish_cmds=$lt_finish_cmds + + # Same as above, but a single script fragment to be evaled but not shown. + finish_eval=$lt_finish_eval + + # Take the output of nm and produce a listing of raw symbols and C names. + global_symbol_pipe=$lt_global_symbol_pipe + + # Transform the output of nm in a proper C declaration + global_symbol_to_cdecl=$lt_global_symbol_to_cdecl + + # Transform the output of nm in a C name address pair + global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address + + # This is the shared library runtime path variable. + runpath_var=$runpath_var + + # This is the shared library path variable. + shlibpath_var=$shlibpath_var + + # Is shlibpath searched before the hard-coded library search path? + shlibpath_overrides_runpath=$shlibpath_overrides_runpath + + # How to hardcode a shared library path into an executable. + hardcode_action=$hardcode_action + + # Whether we should hardcode library paths into libraries. + hardcode_into_libs=$hardcode_into_libs + + # Flag to hardcode \$libdir into a binary during linking. + # This must work even if \$libdir does not exist. + hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + + # Whether we need a single -rpath flag with a separated argument. + hardcode_libdir_separator=$lt_hardcode_libdir_separator + + # Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the + # resulting binary. + hardcode_direct=$hardcode_direct + + # Set to yes if using the -LDIR flag during linking hardcodes DIR into the + # resulting binary. + hardcode_minus_L=$hardcode_minus_L + + # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into + # the resulting binary. + hardcode_shlibpath_var=$hardcode_shlibpath_var + + # Variables whose values should be saved in libtool wrapper scripts and + # restored at relink time. + variables_saved_for_relink="$variables_saved_for_relink" + + # Whether libtool must link a program against all its dependency libraries. + link_all_deplibs=$link_all_deplibs + + # Compile-time system search path for libraries + sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + + # Run-time system search path for libraries + sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + + # Fix the shell variable \$srcfile for the compiler. + fix_srcfile_path="$fix_srcfile_path" + + # Set to yes if exported symbols are required. + always_export_symbols=$always_export_symbols + + # The commands to list exported symbols. + export_symbols_cmds=$lt_export_symbols_cmds + + # The commands to extract the exported symbol list from a shared archive. + extract_expsyms_cmds=$lt_extract_expsyms_cmds + + # Symbols that should not be listed in the preloaded symbols. + exclude_expsyms=$lt_exclude_expsyms + + # Symbols that must always be exported. + include_expsyms=$lt_include_expsyms + + # ### END LIBTOOL CONFIG + + __EOF__ + + case $host_os in + aix3*) + cat <<\EOF >> "${ofile}T" + + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + EOF + ;; + esac + + case $host_os in + cygwin* | mingw* | pw32* | os2*) + cat <<'EOF' >> "${ofile}T" + # This is a source program that is used to create dlls on Windows + # Don't remove nor modify the starting and closing comments + # /* ltdll.c starts here */ + # #define WIN32_LEAN_AND_MEAN + # #include + # #undef WIN32_LEAN_AND_MEAN + # #include + # + # #ifndef __CYGWIN__ + # # ifdef __CYGWIN32__ + # # define __CYGWIN__ __CYGWIN32__ + # # endif + # #endif + # + # #ifdef __cplusplus + # extern "C" { + # #endif + # BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); + # #ifdef __cplusplus + # } + # #endif + # + # #ifdef __CYGWIN__ + # #include + # DECLARE_CYGWIN_DLL( DllMain ); + # #endif + # HINSTANCE __hDllInstance_base; + # + # BOOL APIENTRY + # DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) + # { + # __hDllInstance_base = hInst; + # return TRUE; + # } + # /* ltdll.c ends here */ + # This is a source program that is used to create import libraries + # on Windows for dlls which lack them. Don't remove nor modify the + # starting and closing comments + # /* impgen.c starts here */ + # /* Copyright (C) 1999-2000 Free Software Foundation, Inc. + # + # This file is part of GNU libtool. + # + # This program is free software; you can redistribute it and/or modify + # it under the terms of the GNU General Public License as published by + # the Free Software Foundation; either version 2 of the License, or + # (at your option) any later version. + # + # This program is distributed in the hope that it will be useful, + # but WITHOUT ANY WARRANTY; without even the implied warranty of + # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + # GNU General Public License for more details. + # + # You should have received a copy of the GNU General Public License + # along with this program; if not, write to the Free Software + # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + # */ + # + # #include /* for printf() */ + # #include /* for open(), lseek(), read() */ + # #include /* for O_RDONLY, O_BINARY */ + # #include /* for strdup() */ + # + # /* O_BINARY isn't required (or even defined sometimes) under Unix */ + # #ifndef O_BINARY + # #define O_BINARY 0 + # #endif + # + # static unsigned int + # pe_get16 (fd, offset) + # int fd; + # int offset; + # { + # unsigned char b[2]; + # lseek (fd, offset, SEEK_SET); + # read (fd, b, 2); + # return b[0] + (b[1]<<8); + # } + # + # static unsigned int + # pe_get32 (fd, offset) + # int fd; + # int offset; + # { + # unsigned char b[4]; + # lseek (fd, offset, SEEK_SET); + # read (fd, b, 4); + # return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); + # } + # + # static unsigned int + # pe_as32 (ptr) + # void *ptr; + # { + # unsigned char *b = ptr; + # return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); + # } + # + # int + # main (argc, argv) + # int argc; + # char *argv[]; + # { + # int dll; + # unsigned long pe_header_offset, opthdr_ofs, num_entries, i; + # unsigned long export_rva, export_size, nsections, secptr, expptr; + # unsigned long name_rvas, nexp; + # unsigned char *expdata, *erva; + # char *filename, *dll_name; + # + # filename = argv[1]; + # + # dll = open(filename, O_RDONLY|O_BINARY); + # if (dll < 1) + # return 1; + # + # dll_name = filename; + # + # for (i=0; filename[i]; i++) + # if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') + # dll_name = filename + i +1; + # + # pe_header_offset = pe_get32 (dll, 0x3c); + # opthdr_ofs = pe_header_offset + 4 + 20; + # num_entries = pe_get32 (dll, opthdr_ofs + 92); + # + # if (num_entries < 1) /* no exports */ + # return 1; + # + # export_rva = pe_get32 (dll, opthdr_ofs + 96); + # export_size = pe_get32 (dll, opthdr_ofs + 100); + # nsections = pe_get16 (dll, pe_header_offset + 4 +2); + # secptr = (pe_header_offset + 4 + 20 + + # pe_get16 (dll, pe_header_offset + 4 + 16)); + # + # expptr = 0; + # for (i = 0; i < nsections; i++) + # { + # char sname[8]; + # unsigned long secptr1 = secptr + 40 * i; + # unsigned long vaddr = pe_get32 (dll, secptr1 + 12); + # unsigned long vsize = pe_get32 (dll, secptr1 + 16); + # unsigned long fptr = pe_get32 (dll, secptr1 + 20); + # lseek(dll, secptr1, SEEK_SET); + # read(dll, sname, 8); + # if (vaddr <= export_rva && vaddr+vsize > export_rva) + # { + # expptr = fptr + (export_rva - vaddr); + # if (export_rva + export_size > vaddr + vsize) + # export_size = vsize - (export_rva - vaddr); + # break; + # } + # } + # + # expdata = (unsigned char*)malloc(export_size); + # lseek (dll, expptr, SEEK_SET); + # read (dll, expdata, export_size); + # erva = expdata - export_rva; + # + # nexp = pe_as32 (expdata+24); + # name_rvas = pe_as32 (expdata+32); + # + # printf ("EXPORTS\n"); + # for (i = 0; i> "${ofile}T" || (rm -f "${ofile}T"; exit 1) + + mv -f "${ofile}T" "$ofile" || \ + (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T") + chmod +x "$ofile" + fi + + ])# _LT_AC_LTCONFIG_HACK + + # AC_LIBTOOL_DLOPEN - enable checks for dlopen support + AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) + + # AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's + AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) + + # AC_ENABLE_SHARED - implement the --enable-shared flag + # Usage: AC_ENABLE_SHARED[(DEFAULT)] + # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to + # `yes'. + AC_DEFUN([AC_ENABLE_SHARED], + [define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl + AC_ARG_ENABLE(shared, + changequote(<<, >>)dnl + << --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], + changequote([, ])dnl + [p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," + for pkg in $enableval; do + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$ac_save_ifs" + ;; + esac], + enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl + ]) + + # AC_DISABLE_SHARED - set the default shared flag to --disable-shared + AC_DEFUN([AC_DISABLE_SHARED], + [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + AC_ENABLE_SHARED(no)]) + + # AC_ENABLE_STATIC - implement the --enable-static flag + # Usage: AC_ENABLE_STATIC[(DEFAULT)] + # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to + # `yes'. + AC_DEFUN([AC_ENABLE_STATIC], + [define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl + AC_ARG_ENABLE(static, + changequote(<<, >>)dnl + << --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], + changequote([, ])dnl + [p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," + for pkg in $enableval; do + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$ac_save_ifs" + ;; + esac], + enable_static=AC_ENABLE_STATIC_DEFAULT)dnl + ]) + + # AC_DISABLE_STATIC - set the default static flag to --disable-static + AC_DEFUN([AC_DISABLE_STATIC], + [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + AC_ENABLE_STATIC(no)]) + + + # AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag + # Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] + # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to + # `yes'. + AC_DEFUN([AC_ENABLE_FAST_INSTALL], + [define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl + AC_ARG_ENABLE(fast-install, + changequote(<<, >>)dnl + << --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], + changequote([, ])dnl + [p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," + for pkg in $enableval; do + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$ac_save_ifs" + ;; + esac], + enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl + ]) + + # AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install + AC_DEFUN([AC_DISABLE_FAST_INSTALL], + [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + AC_ENABLE_FAST_INSTALL(no)]) + + # AC_LIBTOOL_PICMODE - implement the --with-pic flag + # Usage: AC_LIBTOOL_PICMODE[(MODE)] + # Where MODE is either `yes' or `no'. If omitted, it defaults to + # `both'. + AC_DEFUN([AC_LIBTOOL_PICMODE], + [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + pic_mode=ifelse($#,1,$1,default)]) + + + # AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library + AC_DEFUN([AC_PATH_TOOL_PREFIX], + [AC_MSG_CHECKING([for $1]) + AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, + [case $MAGIC_CMD in + /*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; + ?:/*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. + ;; + *) + ac_save_MAGIC_CMD="$MAGIC_CMD" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + dnl $ac_dummy forces splitting on constant user-supplied paths. + dnl POSIX.2 word splitting is done only on the output of word expansions, + dnl not every word. This closes a longstanding sh security hole. + ac_dummy="ifelse([$2], , $PATH, [$2])" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$1; then + lt_cv_path_MAGIC_CMD="$ac_dir/$1" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + egrep "$file_magic_regex" > /dev/null; then + : + else + cat <&2 + + *** Warning: the command libtool uses to detect shared libraries, + *** $file_magic_cmd, produces output that libtool cannot recognize. + *** The result is that libtool may fail to recognize shared libraries + *** as such. This will affect the creation of libtool libraries that + *** depend on shared libraries, but programs linked with such libtool + *** libraries will work regardless of this problem. Nevertheless, you + *** may want to report the problem to your system manager and/or to + *** bug-libtool@gnu.org + + EOF + fi ;; + esac + fi + break + fi + done + IFS="$ac_save_ifs" + MAGIC_CMD="$ac_save_MAGIC_CMD" + ;; + esac]) + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if test -n "$MAGIC_CMD"; then + AC_MSG_RESULT($MAGIC_CMD) + else + AC_MSG_RESULT(no) + fi + ]) + + + # AC_PATH_MAGIC - find a file program which can recognise a shared library + AC_DEFUN([AC_PATH_MAGIC], + [AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl + AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH) + if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH) + else + MAGIC_CMD=: + fi + fi + ]) + + + # AC_PROG_LD - find the path to the GNU or non-GNU linker + AC_DEFUN([AC_PROG_LD], + [AC_ARG_WITH(gnu-ld, + [ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], + test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) + AC_REQUIRE([AC_PROG_CC])dnl + AC_REQUIRE([AC_CANONICAL_HOST])dnl + AC_REQUIRE([AC_CANONICAL_BUILD])dnl + AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl + ac_prog=ld + if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by GCC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]]* | [[A-Za-z]]:[[\\/]]*) + re_direlt='/[[^/]][[^/]]*/\.\./' + # Canonicalize the path of ld + ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac + elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) + else + AC_MSG_CHECKING([for non-GNU ld]) + fi + AC_CACHE_VAL(lt_cv_path_LD, + [if test -z "$LD"; then + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some GNU ld's only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then + test "$with_gnu_ld" != no && break + else + test "$with_gnu_ld" != yes && break + fi + fi + done + IFS="$ac_save_ifs" + else + lt_cv_path_LD="$LD" # Let the user override the test with a path. + fi]) + LD="$lt_cv_path_LD" + if test -n "$LD"; then + AC_MSG_RESULT($LD) + else + AC_MSG_RESULT(no) + fi + test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) + AC_PROG_LD_GNU + ]) + + # AC_PROG_LD_GNU - + AC_DEFUN([AC_PROG_LD_GNU], + [AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, + [# I'd rather use --version here, but apparently some GNU ld's only accept -v. + if $LD -v 2>&1 &5; then + lt_cv_prog_gnu_ld=yes + else + lt_cv_prog_gnu_ld=no + fi]) + with_gnu_ld=$lt_cv_prog_gnu_ld + ]) + + # AC_PROG_LD_RELOAD_FLAG - find reload flag for linker + # -- PORTME Some linkers may need a different reload flag. + AC_DEFUN([AC_PROG_LD_RELOAD_FLAG], + [AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag, + [lt_cv_ld_reload_flag='-r']) + reload_flag=$lt_cv_ld_reload_flag + test -n "$reload_flag" && reload_flag=" $reload_flag" + ]) + + # AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies + # -- PORTME fill in with the dynamic library characteristics + AC_DEFUN([AC_DEPLIBS_CHECK_METHOD], + [AC_CACHE_CHECK([how to recognise dependant libraries], + lt_cv_deplibs_check_method, + [lt_cv_file_magic_cmd='$MAGIC_CMD' + lt_cv_file_magic_test_file= + lt_cv_deplibs_check_method='unknown' + # Need to set the preceding variable on all platforms that support + # interlibrary dependencies. + # 'none' -- dependencies not supported. + # `unknown' -- same as none, but documents that we really don't know. + # 'pass_all' -- all dependencies passed with no checks. + # 'test_compile' -- check by making test program. + # 'file_magic [[regex]]' -- check by looking for files in library path + # which responds to the $file_magic_cmd with a given egrep regex. + # If you have `file' or equivalent on your system and you're not sure + # whether `pass_all' will *always* work, you probably want this one. + + case $host_os in + aix4* | aix5*) + lt_cv_deplibs_check_method=pass_all + ;; + + beos*) + lt_cv_deplibs_check_method=pass_all + ;; + + bsdi4*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + + cygwin* | mingw* | pw32*) + lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + + darwin* | rhapsody*) + lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' + lt_cv_file_magic_cmd='/usr/bin/file -L' + case "$host_os" in + rhapsody* | darwin1.[[012]]) + lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1` + ;; + *) # Darwin 1.3 on + lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' + ;; + esac + ;; + + freebsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + + gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + + hpux10.20*|hpux11*) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + + irix5* | irix6*) + case $host_os in + irix5*) + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" + ;; + *) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1" + ;; + esac + lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` + lt_cv_deplibs_check_method=pass_all + ;; + + # This must be Linux ELF. + linux-gnu*) + case $host_cpu in + alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* ) + lt_cv_deplibs_check_method=pass_all ;; + *) + # glibc up to 2.1.1 does not perform some relocations on ARM + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; + esac + lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so\.[[0-9]]+\.[[0-9]]+$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so$' + fi + ;; + + newos6*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + + openbsd*) + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object' + else + lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' + fi + ;; + + osf3* | osf4* | osf5*) + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' + lt_cv_file_magic_test_file=/shlib/libc.so + lt_cv_deplibs_check_method=pass_all + ;; + + sco3.2v5*) + lt_cv_deplibs_check_method=pass_all + ;; + + solaris*) + lt_cv_deplibs_check_method=pass_all + lt_cv_file_magic_test_file=/lib/libc.so + ;; + + sysv5uw[[78]]* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + esac + ;; + esac + ]) + file_magic_cmd=$lt_cv_file_magic_cmd + deplibs_check_method=$lt_cv_deplibs_check_method + ]) + + + # AC_PROG_NM - find the path to a BSD-compatible name lister + AC_DEFUN([AC_PROG_NM], + [AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl + AC_MSG_CHECKING([for BSD-compatible nm]) + AC_CACHE_VAL(lt_cv_path_NM, + [if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" + else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do + test -z "$ac_dir" && ac_dir=. + tmp_nm=$ac_dir/${ac_tool_prefix}nm + if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then + # AIX needs to suppress demangling for C++ to work correctly + # AIX nm : The default is to demangle all C++ symbol names + # GNU nm : The default is to not demangle low-level symbol names. + case $host_os in + aix*) + # check if we are using GNU nm on AIX + if $tmp_nm -V 2> /dev/null | grep GNU 2>&1 > /dev/null + then + lt_cv_path_NM="$tmp_nm -B" + else + lt_cv_path_NM="$tmp_nm -BC" + fi + ;; + *) + lt_cv_path_NM="$tmp_nm -B" + ;; + esac + break + elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then + lt_cv_path_NM="$tmp_nm -p" + break + else + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + fi + fi + done + IFS="$ac_save_ifs" + test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm + fi]) + NM="$lt_cv_path_NM" + AC_MSG_RESULT([$NM]) + ]) + + # AC_CHECK_LIBM - check for math library + AC_DEFUN([AC_CHECK_LIBM], + [AC_REQUIRE([AC_CANONICAL_HOST])dnl + LIBM= + case $host in + *-*-beos* | *-*-cygwin* | *-*-pw32*) + # These system don't have libm + ;; + *-ncr-sysv4.3*) + AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") + AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") + ;; + *) + AC_CHECK_LIB(m, main, LIBM="-lm") + ;; + esac + ]) + + # AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for + # the libltdl convenience library and INCLTDL to the include flags for + # the libltdl header and adds --enable-ltdl-convenience to the + # configure arguments. Note that LIBLTDL and INCLTDL are not + # AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not + # provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed + # with '${top_builddir}/' and INCLTDL will be prefixed with + # '${top_srcdir}/' (note the single quotes!). If your package is not + # flat and you're not using automake, define top_builddir and + # top_srcdir appropriately in the Makefiles. + AC_DEFUN([AC_LIBLTDL_CONVENIENCE], + [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + case $enable_ltdl_convenience in + no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; + "") enable_ltdl_convenience=yes + ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; + esac + LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la + INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + ]) + + # AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for + # the libltdl installable library and INCLTDL to the include flags for + # the libltdl header and adds --enable-ltdl-install to the configure + # arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is + # AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed + # libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will + # be prefixed with '${top_builddir}/' and INCLTDL will be prefixed + # with '${top_srcdir}/' (note the single quotes!). If your package is + # not flat and you're not using automake, define top_builddir and + # top_srcdir appropriately in the Makefiles. + # In the future, this macro may have to be called after AC_PROG_LIBTOOL. + AC_DEFUN([AC_LIBLTDL_INSTALLABLE], + [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + AC_CHECK_LIB(ltdl, main, + [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], + [if test x"$enable_ltdl_install" = xno; then + AC_MSG_WARN([libltdl not installed, but installation disabled]) + else + enable_ltdl_install=yes + fi + ]) + if test x"$enable_ltdl_install" = x"yes"; then + ac_configure_args="$ac_configure_args --enable-ltdl-install" + LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la + INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + else + ac_configure_args="$ac_configure_args --enable-ltdl-install=no" + LIBLTDL="-lltdl" + INCLTDL= + fi + ]) + + # old names + AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) + AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) + AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) + AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) + AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) + AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) + AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) + + # This is just to silence aclocal about the macro not being used + ifelse([AC_DISABLE_FAST_INSTALL]) + + # Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + + # AM_AUTOMAKE_VERSION(VERSION) + # ---------------------------- + # Automake X.Y traces this macro to ensure aclocal.m4 has been + # generated from the m4 files accompanying Automake X.Y. + AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) + + # AM_SET_CURRENT_AUTOMAKE_VERSION + # ------------------------------- + # Call AM_AUTOMAKE_VERSION so it can be traced. + # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. + AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], + [AM_AUTOMAKE_VERSION([1.9.6])]) + + # AM_AUX_DIR_EXPAND -*- Autoconf -*- + + # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + + # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets + # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to + # `$srcdir', `$srcdir/..', or `$srcdir/../..'. + # + # Of course, Automake must honor this variable whenever it calls a + # tool from the auxiliary directory. The problem is that $srcdir (and + # therefore $ac_aux_dir as well) can be either absolute or relative, + # depending on how configure is run. This is pretty annoying, since + # it makes $ac_aux_dir quite unusable in subdirectories: in the top + # source directory, any form will work fine, but in subdirectories a + # relative path needs to be adjusted first. + # + # $ac_aux_dir/missing + # fails when called from a subdirectory if $ac_aux_dir is relative + # $top_srcdir/$ac_aux_dir/missing + # fails if $ac_aux_dir is absolute, + # fails when called from a subdirectory in a VPATH build with + # a relative $ac_aux_dir + # + # The reason of the latter failure is that $top_srcdir and $ac_aux_dir + # are both prefixed by $srcdir. In an in-source build this is usually + # harmless because $srcdir is `.', but things will broke when you + # start a VPATH build or use an absolute $srcdir. + # + # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, + # iff we strip the leading $srcdir from $ac_aux_dir. That would be: + # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` + # and then we would define $MISSING as + # MISSING="\${SHELL} $am_aux_dir/missing" + # This will work as long as MISSING is not called from configure, because + # unfortunately $(top_srcdir) has no meaning in configure. + # However there are other variables, like CC, which are often used in + # configure, and could therefore not use this "fixed" $ac_aux_dir. + # + # Another solution, used here, is to always expand $ac_aux_dir to an + # absolute PATH. The drawback is that using absolute paths prevent a + # configured tree to be moved without reconfiguration. + + AC_DEFUN([AM_AUX_DIR_EXPAND], + [dnl Rely on autoconf to set up CDPATH properly. + AC_PREREQ([2.50])dnl + # expand $ac_aux_dir to an absolute path + am_aux_dir=`cd $ac_aux_dir && pwd` + ]) + + # AM_CONDITIONAL -*- Autoconf -*- + + # Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005 + # Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + + # serial 7 + + # AM_CONDITIONAL(NAME, SHELL-CONDITION) + # ------------------------------------- + # Define a conditional. + AC_DEFUN([AM_CONDITIONAL], + [AC_PREREQ(2.52)dnl + ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl + AC_SUBST([$1_TRUE]) + AC_SUBST([$1_FALSE]) + if $2; then + $1_TRUE= + $1_FALSE='#' + else + $1_TRUE='#' + $1_FALSE= + fi + AC_CONFIG_COMMANDS_PRE( + [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. + Usually this means the macro was only invoked conditionally.]]) + fi])]) + + + # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 + # Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + + # serial 8 + + # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be + # written in clear, in which case automake, when reading aclocal.m4, + # will think it sees a *use*, and therefore will trigger all it's + # C support machinery. Also note that it means that autoscan, seeing + # CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + + # _AM_DEPENDENCIES(NAME) + # ---------------------- + # See how the compiler implements dependency checking. + # NAME is "CC", "CXX", "GCJ", or "OBJC". + # We try a few techniques and use that to set a single cache variable. + # + # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was + # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular + # dependency, and given that the user is not expected to run this macro, + # just rely on AC_PROG_CC. + AC_DEFUN([_AM_DEPENDENCIES], + [AC_REQUIRE([AM_SET_DEPDIR])dnl + AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl + AC_REQUIRE([AM_MAKE_INCLUDE])dnl + AC_REQUIRE([AM_DEP_TRACK])dnl + + ifelse([$1], CC, [depcc="$CC" am_compiler_list=], + [$1], CXX, [depcc="$CXX" am_compiler_list=], + [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + + AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], + [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + case $depmode in + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + none) break ;; + esac + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. + if depmode=$depmode \ + source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir + else + am_cv_$1_dependencies_compiler_type=none + fi + ]) + AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) + AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) + ]) + + + # AM_SET_DEPDIR + # ------------- + # Choose a directory name for dependency files. + # This macro is AC_REQUIREd in _AM_DEPENDENCIES + AC_DEFUN([AM_SET_DEPDIR], + [AC_REQUIRE([AM_SET_LEADING_DOT])dnl + AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl + ]) + + + # AM_DEP_TRACK + # ------------ + AC_DEFUN([AM_DEP_TRACK], + [AC_ARG_ENABLE(dependency-tracking, + [ --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors]) + if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + fi + AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) + AC_SUBST([AMDEPBACKSLASH]) + ]) + + # Generate code to set up dependency tracking. -*- Autoconf -*- + + # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 + # Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + + #serial 3 + + # _AM_OUTPUT_DEPENDENCY_COMMANDS + # ------------------------------ + AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], + [for mf in $CONFIG_FILES; do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # So let's grep whole file. + if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done + ])# _AM_OUTPUT_DEPENDENCY_COMMANDS + + + # AM_OUTPUT_DEPENDENCY_COMMANDS + # ----------------------------- + # This macro should only be invoked once -- use via AC_REQUIRE. + # + # This code is only required when automatic dependency tracking + # is enabled. FIXME. This creates each `.P' file that we will + # need in order to bootstrap the dependency handling code. + AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], + [AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) + ]) + + # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 + # Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + + # serial 8 + + # AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. + AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) + + # Do all the work for Automake. -*- Autoconf -*- + + # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 + # Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + + # serial 12 + + # This macro actually does too much. Some checks are only needed if + # your package does certain things. But this isn't really a big deal. + + # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) + # AM_INIT_AUTOMAKE([OPTIONS]) + # ----------------------------------------------- + # The call with PACKAGE and VERSION arguments is the old style + # call (pre autoconf-2.50), which is being phased out. PACKAGE + # and VERSION should now be passed to AC_INIT and removed from + # the call to AM_INIT_AUTOMAKE. + # We support both call styles for the transition. After + # the next Automake release, Autoconf can make the AC_INIT + # arguments mandatory, and then we can depend on a new Autoconf + # release and drop the old call support. + AC_DEFUN([AM_INIT_AUTOMAKE], + [AC_PREREQ([2.58])dnl + dnl Autoconf wants to disallow AM_ names. We explicitly allow + dnl the ones we care about. + m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl + AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl + AC_REQUIRE([AC_PROG_INSTALL])dnl + # test to see if srcdir already configured + if test "`cd $srcdir && pwd`" != "`pwd`" && + test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi + + # test whether we have cygpath + if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi + fi + AC_SUBST([CYGPATH_W]) + + # Define the identity of the package. + dnl Distinguish between old-style and new-style calls. + m4_ifval([$2], + [m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], + [_AM_SET_OPTIONS([$1])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + + _AM_IF_OPTION([no-define],, + [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) + AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl + + # Some tools Automake needs. + AC_REQUIRE([AM_SANITY_CHECK])dnl + AC_REQUIRE([AC_ARG_PROGRAM])dnl + AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) + AM_MISSING_PROG(AUTOCONF, autoconf) + AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) + AM_MISSING_PROG(AUTOHEADER, autoheader) + AM_MISSING_PROG(MAKEINFO, makeinfo) + AM_PROG_INSTALL_SH + AM_PROG_INSTALL_STRIP + AC_REQUIRE([AM_PROG_MKDIR_P])dnl + # We need awk for the "check" target. The system "awk" is bad on + # some platforms. + AC_REQUIRE([AC_PROG_AWK])dnl + AC_REQUIRE([AC_PROG_MAKE_SET])dnl + AC_REQUIRE([AM_SET_LEADING_DOT])dnl + _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) + _AM_IF_OPTION([no-dependencies],, + [AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES(CC)], + [define([AC_PROG_CC], + defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl + AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES(CXX)], + [define([AC_PROG_CXX], + defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl + ]) + ]) + + + # When config.status generates a header, we must update the stamp-h file. + # This file resides in the same directory as the config header + # that is generated. The stamp files are numbered to have different names. + + # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the + # loop where config.status creates the headers, so we can generate + # our stamp files there. + AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], + [# Compute $1's index in $config_headers. + _am_stamp_count=1 + for _am_header in $config_headers :; do + case $_am_header in + $1 | $1:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac + done + echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) + + # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + + # AM_PROG_INSTALL_SH + # ------------------ + # Define $install_sh. + AC_DEFUN([AM_PROG_INSTALL_SH], + [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl + install_sh=${install_sh-"$am_aux_dir/install-sh"} + AC_SUBST(install_sh)]) + + # Copyright (C) 2003, 2005 Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + + # serial 2 + + # Check whether the underlying file-system supports filenames + # with a leading dot. For instance MS-DOS doesn't. + AC_DEFUN([AM_SET_LEADING_DOT], + [rm -rf .tst 2>/dev/null + mkdir .tst 2>/dev/null + if test -d .tst; then + am__leading_dot=. + else + am__leading_dot=_ + fi + rmdir .tst 2>/dev/null + AC_SUBST([am__leading_dot])]) + + # Check to see how 'make' treats includes. -*- Autoconf -*- + + # Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + + # serial 3 + + # AM_MAKE_INCLUDE() + # ----------------- + # Check to see how make treats includes. + AC_DEFUN([AM_MAKE_INCLUDE], + [am_make=${MAKE-make} + cat > confinc << 'END' + am__doit: + @echo done + .PHONY: am__doit + END + # If we don't find an include directive, just comment out the code. + AC_MSG_CHECKING([for style of include used by $am_make]) + am__include="#" + am__quote= + _am_result=none + # First try GNU make style include. + echo "include confinc" > confmf + # We grep out `Entering directory' and `Leaving directory' + # messages which can occur if `w' ends up in MAKEFLAGS. + # In particular we don't look at `^make:' because GNU make might + # be invoked under some other name (usually "gmake"), in which + # case it prints its new name instead of `make'. + if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then + am__include=include + am__quote= + _am_result=GNU + fi + # Now try BSD make style include. + if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then + am__include=.include + am__quote="\"" + _am_result=BSD + fi + fi + AC_SUBST([am__include]) + AC_SUBST([am__quote]) + AC_MSG_RESULT([$_am_result]) + rm -f confinc confmf + ]) + + # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + + # Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005 + # Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + + # serial 4 + + # AM_MISSING_PROG(NAME, PROGRAM) + # ------------------------------ + AC_DEFUN([AM_MISSING_PROG], + [AC_REQUIRE([AM_MISSING_HAS_RUN]) + $1=${$1-"${am_missing_run}$2"} + AC_SUBST($1)]) + + + # AM_MISSING_HAS_RUN + # ------------------ + # Define MISSING if not defined so far and test if it supports --run. + # If it does, set am_missing_run to use it, otherwise, to nothing. + AC_DEFUN([AM_MISSING_HAS_RUN], + [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl + test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" + # Use eval to expand $SHELL + if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " + else + am_missing_run= + AC_MSG_WARN([`missing' script is too old or missing]) + fi + ]) + + # Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + + # AM_PROG_MKDIR_P + # --------------- + # Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. + # + # Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories + # created by `make install' are always world readable, even if the + # installer happens to have an overly restrictive umask (e.g. 077). + # This was a mistake. There are at least two reasons why we must not + # use `-m 0755': + # - it causes special bits like SGID to be ignored, + # - it may be too restrictive (some setups expect 775 directories). + # + # Do not use -m 0755 and let people choose whatever they expect by + # setting umask. + # + # We cannot accept any implementation of `mkdir' that recognizes `-p'. + # Some implementations (such as Solaris 8's) are not thread-safe: if a + # parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' + # concurrently, both version can detect that a/ is missing, but only + # one can create it and the other will error out. Consequently we + # restrict ourselves to GNU make (using the --version option ensures + # this.) + AC_DEFUN([AM_PROG_MKDIR_P], + [if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in + # $(mkdir_p) $(somedir) + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' + else + # On NextStep and OpenStep, the `mkdir' command does not + # recognize any option. It will interpret all options as + # directories to create, and then abort because `.' already + # exists. + for d in ./-p ./--version; + do + test -d $d && rmdir $d + done + # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. + if test -f "$ac_aux_dir/mkinstalldirs"; then + mkdir_p='$(mkinstalldirs)' + else + mkdir_p='$(install_sh) -d' + fi + fi + AC_SUBST([mkdir_p])]) + + # Helper functions for option handling. -*- Autoconf -*- + + # Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + + # serial 3 + + # _AM_MANGLE_OPTION(NAME) + # ----------------------- + AC_DEFUN([_AM_MANGLE_OPTION], + [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + + # _AM_SET_OPTION(NAME) + # ------------------------------ + # Set option NAME. Presently that only means defining a flag for this option. + AC_DEFUN([_AM_SET_OPTION], + [m4_define(_AM_MANGLE_OPTION([$1]), 1)]) + + # _AM_SET_OPTIONS(OPTIONS) + # ---------------------------------- + # OPTIONS is a space-separated list of Automake options. + AC_DEFUN([_AM_SET_OPTIONS], + [AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + + # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) + # ------------------------------------------- + # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. + AC_DEFUN([_AM_IF_OPTION], + [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + + # Check to make sure that the build environment is sane. -*- Autoconf -*- + + # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 + # Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + + # serial 4 + + # AM_SANITY_CHECK + # --------------- + AC_DEFUN([AM_SANITY_CHECK], + [AC_MSG_CHECKING([whether build environment is sane]) + # Just in case + sleep 1 + echo timestamp > conftest.file + # Do `set' in a subshell so we don't clobber the current shell's + # arguments. Must try -L first in case configure is actually a + # symlink; some systems play weird games with the mod time of symlinks + # (eg FreeBSD returns the mod time of the symlink's containing + # directory). + if ( + set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftest.file` + fi + rm -f conftest.file + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken + alias in your environment]) + fi + + test "$[2]" = conftest.file + ) + then + # Ok. + : + else + AC_MSG_ERROR([newly created file is older than distributed files! + Check your system clock]) + fi + AC_MSG_RESULT(yes)]) + + # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + + # AM_PROG_INSTALL_STRIP + # --------------------- + # One issue with vendor `install' (even GNU) is that you can't + # specify the program used to strip binaries. This is especially + # annoying in cross-compiling environments, where the build's strip + # is unlikely to handle the host's binaries. + # Fortunately install-sh will honor a STRIPPROG variable, so we + # always use install-sh in `make install-strip', and initialize + # STRIPPROG with the value of the STRIP variable (set by the user). + AC_DEFUN([AM_PROG_INSTALL_STRIP], + [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl + # Installed binaries are usually stripped using `strip' when the user + # run `make install-strip'. However `strip' might not be the right + # tool to use in cross-compilation environments, therefore Automake + # will honor the `STRIP' environment variable to overrule this program. + dnl Don't test for $cross_compiling = yes, because it might be `maybe'. + if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) + fi + INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" + AC_SUBST([INSTALL_STRIP_PROGRAM])]) + + # Check how to create a tarball. -*- Autoconf -*- + + # Copyright (C) 2004, 2005 Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + + # serial 2 + + # _AM_PROG_TAR(FORMAT) + # -------------------- + # Check how to create a tarball in format FORMAT. + # FORMAT should be one of `v7', `ustar', or `pax'. + # + # Substitute a variable $(am__tar) that is a command + # writing to stdout a FORMAT-tarball containing the directory + # $tardir. + # tardir=directory && $(am__tar) > result.tar + # + # Substitute a variable $(am__untar) that extract such + # a tarball read from stdin. + # $(am__untar) < result.tar + AC_DEFUN([_AM_PROG_TAR], + [# Always define AMTAR for backward compatibility. + AM_MISSING_PROG([AMTAR], [tar]) + m4_if([$1], [v7], + [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) + AC_MSG_CHECKING([how to create a $1 tar archive]) + # Loop over all known methods to create a tar archive until one works. + _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' + _am_tools=${am_cv_prog_tar_$1-$_am_tools} + # Do not fold the above two line into one, because Tru64 sh and + # Solaris sh will not grok spaces in the rhs of `-'. + for _am_tool in $_am_tools + do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi + done + rm -rf conftest.dir + + AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) + AC_MSG_RESULT([$am_cv_prog_tar_$1])]) + AC_SUBST([am__tar]) + AC_SUBST([am__untar]) + ]) # _AM_PROG_TAR + diff -crN ./OTHERS/fontconfig/config.guess /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/config.guess *** ./OTHERS/fontconfig/config.guess Thu Jan 1 01:00:00 1970 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/config.guess Tue Nov 15 17:05:07 2005 *************** *** 0 **** --- 1,1317 ---- + #! /bin/sh + # Attempt to guess a canonical system name. + # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 + # Free Software Foundation, Inc. + + timestamp='2001-09-04' + + # This file is free software; you can redistribute it and/or modify it + # under the terms of the GNU General Public License as published by + # the Free Software Foundation; either version 2 of the License, or + # (at your option) any later version. + # + # This program is distributed in the hope that it will be useful, but + # WITHOUT ANY WARRANTY; without even the implied warranty of + # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + # General Public License for more details. + # + # You should have received a copy of the GNU General Public License + # along with this program; if not, write to the Free Software + # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + # + # As a special exception to the GNU General Public License, if you + # distribute this file as part of a program that contains a + # configuration script generated by Autoconf, you may include it under + # the same distribution terms that you use for the rest of that program. + + # Written by Per Bothner . + # Please send patches to . + # + # This script attempts to guess a canonical system name similar to + # config.sub. If it succeeds, it prints the system name on stdout, and + # exits with 0. Otherwise, it exits with 1. + # + # The plan is that this can be called by configure scripts if you + # don't specify an explicit build system type. + + me=`echo "$0" | sed -e 's,.*/,,'` + + usage="\ + Usage: $0 [OPTION] + + Output the configuration name of the system \`$me' is run on. + + Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + + Report bugs and patches to ." + + version="\ + GNU config.guess ($timestamp) + + Originally written by Per Bothner. + Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 + Free Software Foundation, Inc. + + This is free software; see the source for copying conditions. There is NO + warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + + help=" + Try \`$me --help' for more information." + + # Parse command line + while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit 0 ;; + --version | -v ) + echo "$version" ; exit 0 ;; + --help | --h* | -h ) + echo "$usage"; exit 0 ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac + done + + if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 + fi + + + dummy=dummy-$$ + trap 'rm -f $dummy.c $dummy.o $dummy.rel $dummy; exit 1' 1 2 15 + + # CC_FOR_BUILD -- compiler used by this script. + # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still + # use `HOST_CC' if defined, but it is deprecated. + + set_cc_for_build='case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int dummy(){}" > $dummy.c ; + for c in cc gcc c89 ; do + ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1 ; + if test $? = 0 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + rm -f $dummy.c $dummy.o $dummy.rel ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; + esac' + + # This is needed to find uname on a Pyramid OSx when run in the BSD universe. + # (ghazi@noc.rutgers.edu 1994-08-24) + if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH + fi + + UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown + UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown + UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown + UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + + # Note: order is significant - the case branches are not exclusive. + + case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # Netbsd (nbsd) targets should (where applicable) match one or + # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # Determine the machine/vendor (is the vendor relevant). + case "${UNAME_MACHINE}" in + amiga) machine=m68k-unknown ;; + arm32) machine=arm-unknown ;; + atari*) machine=m68k-atari ;; + sun3*) machine=m68k-sun ;; + mac68k) machine=m68k-apple ;; + macppc) machine=powerpc-apple ;; + hp3[0-9][05]) machine=m68k-hp ;; + ibmrt|romp-ibm) machine=romp-ibm ;; + *) machine=${UNAME_MACHINE}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE}" in + i386|sparc|amiga|arm*|hp300|mvme68k|vax|atari|luna68k|mac68k|news68k|next68k|pc532|sun3*|x68k) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep __ELF__ >/dev/null + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit 0 ;; + alpha:OSF1:*:*) + if test $UNAME_RELEASE = "V4.0"; then + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + fi + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + cat <$dummy.s + .data + \$Lformat: + .byte 37,100,45,37,120,10,0 # "%d-%x\n" + + .text + .globl main + .align 4 + .ent main + main: + .frame \$30,16,\$26,0 + ldgp \$29,0(\$27) + .prologue 1 + .long 0x47e03d80 # implver \$0 + lda \$2,-1 + .long 0x47e20c21 # amask \$2,\$1 + lda \$16,\$Lformat + mov \$0,\$17 + not \$1,\$18 + jsr \$26,printf + ldgp \$29,0(\$26) + mov 0,\$16 + jsr \$26,exit + .end main + EOF + eval $set_cc_for_build + $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null + if test "$?" = 0 ; then + case `./$dummy` in + 0-0) + UNAME_MACHINE="alpha" + ;; + 1-0) + UNAME_MACHINE="alphaev5" + ;; + 1-1) + UNAME_MACHINE="alphaev56" + ;; + 1-101) + UNAME_MACHINE="alphapca56" + ;; + 2-303) + UNAME_MACHINE="alphaev6" + ;; + 2-307) + UNAME_MACHINE="alphaev67" + ;; + 2-1307) + UNAME_MACHINE="alphaev68" + ;; + esac + fi + rm -f $dummy.s $dummy + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + exit 0 ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit 0 ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit 0 ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit 0;; + amiga:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit 0 ;; + arc64:OpenBSD:*:*) + echo mips64el-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + arc:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + hkmips:OpenBSD:*:*) + echo mips-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + pmax:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + sgi:OpenBSD:*:*) + echo mips-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + wgrisc:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit 0 ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit 0;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit 0;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit 0 ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit 0 ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + i86pc:SunOS:5.*:*) + echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit 0 ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit 0 ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit 0 ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit 0 ;; + sparc*:NetBSD:*) + echo `uname -p`-unknown-netbsd${UNAME_RELEASE} + exit 0 ;; + atari*:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit 0 ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit 0 ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit 0 ;; + sun3*:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mac68k:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvme68k:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvme88k:OpenBSD:*:*) + echo m88k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit 0 ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit 0 ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit 0 ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit 0 ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit 0 ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #ifdef __cplusplus + #include /* for printf() prototype */ + int main (int argc, char *argv[]) { + #else + int main (argc, argv) int argc; char *argv[]; { + #endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } + EOF + $CC_FOR_BUILD $dummy.c -o $dummy \ + && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ + && rm -f $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy + echo mips-mips-riscos${UNAME_RELEASE} + exit 0 ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit 0 ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit 0 ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit 0 ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit 0 ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit 0 ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit 0 ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit 0 ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit 0 ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit 0 ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit 0 ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit 0 ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit 0 ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit 0 ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } + EOF + $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy + echo rs6000-ibm-aix3.2.5 + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit 0 ;; + *:AIX:*:[45]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit 0 ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit 0 ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit 0 ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit 0 ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit 0 ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit 0 ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit 0 ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit 0 ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + case "${HPUX_REV}" in + 11.[0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + esac ;; + esac + fi ;; + esac + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } + EOF + (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy` + if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi + rm -f $dummy.c $dummy + fi ;; + esac + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit 0 ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit 0 ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } + EOF + $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy + echo unknown-hitachi-hiuxwe2 + exit 0 ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit 0 ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit 0 ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit 0 ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit 0 ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit 0 ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit 0 ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit 0 ;; + hppa*:OpenBSD:*:*) + echo hppa-unknown-openbsd + exit 0 ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit 0 ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit 0 ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit 0 ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit 0 ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit 0 ;; + CRAY*X-MP:*:*:*) + echo xmp-cray-unicos + exit 0 ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*T3D:*:*:*) + echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY-2:*:*:*) + echo cray2-cray-unicos + exit 0 ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit 0 ;; + hp300:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit 0 ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit 0 ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit 0 ;; + *:FreeBSD:*:*) + echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit 0 ;; + *:OpenBSD:*:*) + echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + exit 0 ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit 0 ;; + i*:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit 0 ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit 0 ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i386-pc-interix + exit 0 ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit 0 ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit 0 ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + *:GNU:*:*) + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit 0 ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit 0 ;; + arm*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux + exit 0 ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + mips:Linux:*:*) + case `sed -n '/^byte/s/^.*: \(.*\) endian/\1/p' < /proc/cpuinfo` in + big) echo mips-unknown-linux-gnu && exit 0 ;; + little) echo mipsel-unknown-linux-gnu && exit 0 ;; + esac + ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu + exit 0 ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit 0 ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit 0 ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac + exit 0 ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu + exit 0 ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux + exit 0 ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + x86_64:Linux:*:*) + echo x86_64-unknown-linux-gnu + exit 0 ;; + i*86:Linux:*:*) + # The BFD linker knows what the default object file format is, so + # first see if it will tell us. cd to the root directory to prevent + # problems with other programs or directories called `ld' in the path. + ld_supported_targets=`cd /; ld --help 2>&1 \ + | sed -ne '/supported targets:/!d + s/[ ][ ]*/ /g + s/.*supported targets: *// + s/ .*// + p'` + case "$ld_supported_targets" in + elf32-i386) + TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" + ;; + a.out-i386-linux) + echo "${UNAME_MACHINE}-pc-linux-gnuaout" + exit 0 ;; + coff-i386) + echo "${UNAME_MACHINE}-pc-linux-gnucoff" + exit 0 ;; + "") + # Either a pre-BFD a.out linker (linux-gnuoldld) or + # one that does not give us useful --help. + echo "${UNAME_MACHINE}-pc-linux-gnuoldld" + exit 0 ;; + esac + # Determine whether the default compiler is a.out or elf + eval $set_cc_for_build + cat >$dummy.c < + #ifdef __cplusplus + #include /* for printf() prototype */ + int main (int argc, char *argv[]) { + #else + int main (argc, argv) int argc; char *argv[]; { + #endif + #ifdef __ELF__ + # ifdef __GLIBC__ + # if __GLIBC__ >= 2 + printf ("%s-pc-linux-gnu\n", argv[1]); + # else + printf ("%s-pc-linux-gnulibc1\n", argv[1]); + # endif + # else + printf ("%s-pc-linux-gnulibc1\n", argv[1]); + # endif + #else + printf ("%s-pc-linux-gnuaout\n", argv[1]); + #endif + return 0; + } + EOF + $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm -f $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy + test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 + ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit 0 ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit 0 ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit 0 ;; + i*86:*:5:[78]*) + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit 0 ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')` + (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit 0 ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit 0 ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i386. + echo i386-pc-msdosdjgpp + exit 0 ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit 0 ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit 0 ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit 0 ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit 0 ;; + M68*:*:R3V[567]*:*) + test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; + 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && echo i486-ncr-sysv4.3${OS_REL} && exit 0 + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && echo i486-ncr-sysv4 && exit 0 ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit 0 ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit 0 ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit 0 ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit 0 ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit 0 ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit 0 ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit 0 ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit 0 ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit 0 ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit 0 ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit 0 ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit 0 ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit 0 ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit 0 ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit 0 ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit 0 ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit 0 ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit 0 ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit 0 ;; + *:Darwin:*:*) + echo `uname -p`-apple-darwin${UNAME_RELEASE} + exit 0 ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + if test "${UNAME_MACHINE}" = "x86pc"; then + UNAME_MACHINE=pc + fi + echo `uname -p`-${UNAME_MACHINE}-nto-qnx + exit 0 ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit 0 ;; + NSR-[KW]:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit 0 ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit 0 ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit 0 ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit 0 ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit 0 ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit 0 ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit 0 ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit 0 ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit 0 ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit 0 ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit 0 ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit 0 ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit 0 ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit 0 ;; + esac + + #echo '(No uname command or uname output not recognized.)' 1>&2 + #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 + + eval $set_cc_for_build + cat >$dummy.c < + # include + #endif + main () + { + #if defined (sony) + #if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); + #else + #include + printf ("m68k-sony-newsos%s\n", + #ifdef NEWSOS4 + "4" + #else + "" + #endif + ); exit (0); + #endif + #endif + + #if defined (__arm) && defined (__acorn) && defined (__unix) + printf ("arm-acorn-riscix"); exit (0); + #endif + + #if defined (hp300) && !defined (hpux) + printf ("m68k-hp-bsd\n"); exit (0); + #endif + + #if defined (NeXT) + #if !defined (__ARCHITECTURE__) + #define __ARCHITECTURE__ "m68k" + #endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); + #endif + + #if defined (MULTIMAX) || defined (n16) + #if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); + #else + #if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); + #else + printf ("ns32k-encore-bsd\n"); exit (0); + #endif + #endif + #endif + + #if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); + #endif + + #if defined (sequent) + #if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); + #endif + #if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); + #endif + #endif + + #if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); + + #endif + + #if defined (vax) + # if !defined (ultrix) + # include + # if defined (BSD) + # if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); + # else + # if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); + # else + printf ("vax-dec-bsd\n"); exit (0); + # endif + # endif + # else + printf ("vax-dec-bsd\n"); exit (0); + # endif + # else + printf ("vax-dec-ultrix\n"); exit (0); + # endif + #endif + + #if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); + #endif + + exit (1); + } + EOF + + $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm -f $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy + + # Apollos put the system type in the environment. + + test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } + + # Convex versions that predate uname can use getsysinfo(1) + + if [ -x /usr/convex/getsysinfo ] + then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd + exit 0 ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit 0 ;; + c34*) + echo c34-convex-bsd + exit 0 ;; + c38*) + echo c38-convex-bsd + exit 0 ;; + c4*) + echo c4-convex-bsd + exit 0 ;; + esac + fi + + cat >&2 < in order to provide the needed + information to handle your system. + + config.guess timestamp = $timestamp + + uname -m = `(uname -m) 2>/dev/null || echo unknown` + uname -r = `(uname -r) 2>/dev/null || echo unknown` + uname -s = `(uname -s) 2>/dev/null || echo unknown` + uname -v = `(uname -v) 2>/dev/null || echo unknown` + + /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` + /bin/uname -X = `(/bin/uname -X) 2>/dev/null` + + hostinfo = `(hostinfo) 2>/dev/null` + /bin/universe = `(/bin/universe) 2>/dev/null` + /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` + /bin/arch = `(/bin/arch) 2>/dev/null` + /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` + /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + + UNAME_MACHINE = ${UNAME_MACHINE} + UNAME_RELEASE = ${UNAME_RELEASE} + UNAME_SYSTEM = ${UNAME_SYSTEM} + UNAME_VERSION = ${UNAME_VERSION} + EOF + + exit 1 + + # Local variables: + # eval: (add-hook 'write-file-hooks 'time-stamp) + # time-stamp-start: "timestamp='" + # time-stamp-format: "%:y-%02m-%02d" + # time-stamp-end: "'" + # End: diff -crN ./OTHERS/fontconfig/config.h.in /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/config.h.in *** ./OTHERS/fontconfig/config.h.in Thu Jan 1 01:00:00 1970 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/config.h.in Tue Nov 15 17:05:27 2005 *************** *** 0 **** --- 1,139 ---- + /* config.h.in. Generated from configure.in by autoheader. */ + + /* Font configuration directory */ + #undef CONFDIR + + /* Additional font directories */ + #undef FC_ADD_FONTS + + /* System font directory */ + #undef FC_DEFAULT_FONTS + + /* Define to 1 if you have the header file, and it defines `DIR'. + */ + #undef HAVE_DIRENT_H + + /* Define to 1 if you have the header file. */ + #undef HAVE_DLFCN_H + + /* Define to 1 if you don't have `vprintf' but do have `_doprnt.' */ + #undef HAVE_DOPRNT + + /* Found a useable expat library */ + #undef HAVE_EXPAT + + /* Define to 1 if you have the header file. */ + #undef HAVE_FCNTL_H + + /* Define to 1 if you have the `FT_Get_First_Char' function. */ + #undef HAVE_FT_GET_FIRST_CHAR + + /* Define to 1 if you have the `geteuid' function. */ + #undef HAVE_GETEUID + + /* Define to 1 if you have the `getopt' function. */ + #undef HAVE_GETOPT + + /* Define to 1 if you have the `getopt_long' function. */ + #undef HAVE_GETOPT_LONG + + /* Define to 1 if you have the `getuid' function. */ + #undef HAVE_GETUID + + /* Define to 1 if you have the header file. */ + #undef HAVE_INTTYPES_H + + /* Define to 1 if you have the `link' function. */ + #undef HAVE_LINK + + /* Define to 1 if you have the `memmove' function. */ + #undef HAVE_MEMMOVE + + /* Define to 1 if you have the header file. */ + #undef HAVE_MEMORY_H + + /* Define to 1 if you have the `memset' function. */ + #undef HAVE_MEMSET + + /* Define to 1 if you have the `mkstemp' function. */ + #undef HAVE_MKSTEMP + + /* Define to 1 if you have the header file, and it defines `DIR'. */ + #undef HAVE_NDIR_H + + /* Define to 1 if you have the header file. */ + #undef HAVE_STDINT_H + + /* Define to 1 if you have the header file. */ + #undef HAVE_STDLIB_H + + /* Define to 1 if you have the `strchr' function. */ + #undef HAVE_STRCHR + + /* Define to 1 if you have the header file. */ + #undef HAVE_STRINGS_H + + /* Define to 1 if you have the header file. */ + #undef HAVE_STRING_H + + /* Define to 1 if you have the `strrchr' function. */ + #undef HAVE_STRRCHR + + /* Define to 1 if you have the `strtol' function. */ + #undef HAVE_STRTOL + + /* Define to 1 if you have the header file, and it defines `DIR'. + */ + #undef HAVE_SYS_DIR_H + + /* Define to 1 if you have the header file, and it defines `DIR'. + */ + #undef HAVE_SYS_NDIR_H + + /* Define to 1 if you have the header file. */ + #undef HAVE_SYS_STAT_H + + /* Define to 1 if you have the header file. */ + #undef HAVE_SYS_TYPES_H + + /* Define to 1 if you have the header file. */ + #undef HAVE_UNISTD_H + + /* Define to 1 if you have the `vprintf' function. */ + #undef HAVE_VPRINTF + + /* Use xmlparse.h instead of expat.h */ + #undef HAVE_XMLPARSE_H + + /* Define to 1 if you have the `XML_ParserCreate' function. */ + #undef HAVE_XML_PARSERCREATE + + /* Name of package */ + #undef PACKAGE + + /* Define to the address where bug reports for this package should be sent. */ + #undef PACKAGE_BUGREPORT + + /* Define to the full name of this package. */ + #undef PACKAGE_NAME + + /* Define to the full name and version of this package. */ + #undef PACKAGE_STRING + + /* Define to the one symbol short name of this package. */ + #undef PACKAGE_TARNAME + + /* Define to the version of this package. */ + #undef PACKAGE_VERSION + + /* Define to 1 if you have the ANSI C header files. */ + #undef STDC_HEADERS + + /* Version number of package */ + #undef VERSION + + /* Define to empty if `const' does not conform to ANSI C. */ + #undef const + + /* Define to `int' if does not define. */ + #undef pid_t diff -crN ./OTHERS/fontconfig/config.sub /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/config.sub *** ./OTHERS/fontconfig/config.sub Thu Jan 1 01:00:00 1970 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/config.sub Tue Nov 15 17:05:07 2005 *************** *** 0 **** --- 1,1411 ---- + #! /bin/sh + # Configuration validation subroutine script. + # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 + # Free Software Foundation, Inc. + + timestamp='2001-09-07' + + # This file is (in principle) common to ALL GNU software. + # The presence of a machine in this file suggests that SOME GNU software + # can handle that machine. It does not imply ALL GNU software can. + # + # This file is free software; you can redistribute it and/or modify + # it under the terms of the GNU General Public License as published by + # the Free Software Foundation; either version 2 of the License, or + # (at your option) any later version. + # + # This program is distributed in the hope that it will be useful, + # but WITHOUT ANY WARRANTY; without even the implied warranty of + # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + # GNU General Public License for more details. + # + # You should have received a copy of the GNU General Public License + # along with this program; if not, write to the Free Software + # Foundation, Inc., 59 Temple Place - Suite 330, + # Boston, MA 02111-1307, USA. + + # As a special exception to the GNU General Public License, if you + # distribute this file as part of a program that contains a + # configuration script generated by Autoconf, you may include it under + # the same distribution terms that you use for the rest of that program. + + # Please send patches to . + # + # Configuration subroutine to validate and canonicalize a configuration type. + # Supply the specified configuration type as an argument. + # If it is invalid, we print an error message on stderr and exit with code 1. + # Otherwise, we print the canonical config type on stdout and succeed. + + # This file is supposed to be the same for all GNU packages + # and recognize all the CPU types, system types and aliases + # that are meaningful with *any* GNU software. + # Each package is responsible for reporting which valid configurations + # it does not support. The user should be able to distinguish + # a failure to support a valid configuration from a meaningless + # configuration. + + # The goal of this file is to map all the various variations of a given + # machine specification into a single specification in the form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM + # or in some cases, the newer four-part form: + # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM + # It is wrong to echo any other type of specification. + + me=`echo "$0" | sed -e 's,.*/,,'` + + usage="\ + Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + + Canonicalize a configuration name. + + Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + + Report bugs and patches to ." + + version="\ + GNU config.sub ($timestamp) + + Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 + Free Software Foundation, Inc. + + This is free software; see the source for copying conditions. There is NO + warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + + help=" + Try \`$me --help' for more information." + + # Parse command line + while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit 0 ;; + --version | -v ) + echo "$version" ; exit 0 ;; + --help | --h* | -h ) + echo "$usage"; exit 0 ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit 0;; + + * ) + break ;; + esac + done + + case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; + esac + + # Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). + # Here we must recognize all the valid KERNEL-OS combinations. + maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` + case $maybe_os in + nto-qnx* | linux-gnu* | storm-chaos* | os2-emx* | windows32-*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; + esac + + ### Let's recognize common machines as not being operating systems so + ### that things like config.sub decstation-3100 work. We also + ### recognize some manufacturers as not being operating systems, so we + ### can provide default operating systems below. + case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis) + os= + basic_machine=$1 + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + esac + + # Decode aliases for certain CPU-COMPANY combinations. + case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ + | c4x | clipper \ + | d10v | d30v | dsp16xx \ + | fr30 \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | i370 | i860 | i960 | ia64 \ + | m32r | m68000 | m68k | m88k | mcore \ + | mips16 | mips64 | mips64el | mips64orion | mips64orionel \ + | mips64vr4100 | mips64vr4100el | mips64vr4300 \ + | mips64vr4300el | mips64vr5000 | mips64vr5000el \ + | mipsbe | mipseb | mipsel | mipsle | mipstx39 | mipstx39el \ + | mipsisa32 \ + | mn10200 | mn10300 \ + | ns16k | ns32k \ + | openrisc \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ + | pyramid \ + | s390 | s390x \ + | sh | sh[34] | sh[34]eb | shbe | shle \ + | sparc | sparc64 | sparclet | sparclite | sparcv9 | sparcv9b \ + | stormy16 | strongarm \ + | tahoe | thumb | tic80 | tron \ + | v850 \ + | we32k \ + | x86 | xscale \ + | z8k) + basic_machine=$basic_machine-unknown + ;; + m6811 | m68hc11 | m6812 | m68hc12) + # Motorola 68HC11/12. + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alphapca5[67]-* | arc-* \ + | arm-* | armbe-* | armle-* | armv*-* \ + | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c54x-* \ + | clipper-* | cray2-* | cydra-* \ + | d10v-* | d30v-* \ + | elxsi-* \ + | f30[01]-* | f700-* | fr30-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | m32r-* \ + | m68000-* | m680[01234]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | mcore-* \ + | mips-* | mips16-* | mips64-* | mips64el-* | mips64orion-* \ + | mips64orionel-* | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* | mipsbe-* | mipseb-* \ + | mipsle-* | mipsel-* | mipstx39-* | mipstx39el-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ + | pyramid-* \ + | romp-* | rs6000-* \ + | s390-* | s390x-* \ + | sh-* | sh[34]-* | sh[34]eb-* | shbe-* | shle-* \ + | sparc-* | sparc64-* | sparc86x-* | sparclite-* \ + | sparcv9-* | sparcv9b-* | stormy16-* | strongarm-* | sv1-* \ + | t3e-* | tahoe-* | thumb-* | tic30-* | tic54x-* | tic80-* | tron-* \ + | v850-* | vax-* \ + | we32k-* \ + | x86-* | x86_64-* | xmp-* | xps100-* | xscale-* \ + | ymp-* \ + | z8k-*) + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | ymp) + basic_machine=ymp-cray + os=-unicos + ;; + cray2) + basic_machine=cray2-cray + os=-unicos + ;; + [cjt]90) + basic_machine=${basic_machine}-cray + os=-unicos + ;; + crds | unos) + basic_machine=m68k-crds + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; + # I'm not sure what "Sysv32" means. Should this be sysv3.2? + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mipsel*-linux*) + basic_machine=mipsel-unknown + os=-linux-gnu + ;; + mips*-linux*) + basic_machine=mips-unknown + os=-linux-gnu + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + mmix*) + basic_machine=mmix-knuth + os=-mmixware + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pentium | p5 | k5 | k6 | nexgen) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon) + basic_machine=i686-pc + ;; + pentiumii | pentium2) + basic_machine=i686-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc) basic_machine=powerpc-unknown + ;; + ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sparclite-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=t3e-cray + os=-unicos + ;; + tic54x | c54x*) + basic_machine=tic54x-unknown + os=-coff + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + windows32) + basic_machine=i386-pc + os=-windows32-msvcrt + ;; + xmp) + basic_machine=xmp-cray + os=-unicos + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + + # Here we handle the default manufacturer of certain CPU types. It is in + # some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + mips) + if [ x$os = x-linux-gnu ]; then + basic_machine=mips-unknown + else + basic_machine=mips-mips + fi + ;; + romp) + basic_machine=romp-ibm + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh3 | sh4 | sh3eb | sh4eb) + basic_machine=sh-unknown + ;; + sparc | sparcv9 | sparcv9b) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + c4x*) + basic_machine=c4x-none + os=-coff + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + esac + + # Here we canonicalize certain aliases for manufacturers. + case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; + esac + + # Decode manufacturer-specific aliases for certain operating systems. + + if [ x"$os" != x"" ] + then + case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \ + | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* \ + | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto*) + os=-nto-qnx + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; + esac + else + + # Here we handle the default operating systems that come with various machines. + # The value should be what the vendor currently ships out the door with their + # machine or put another way, the most popular os provided with the machine. + + # Note that if you're going to try to match "-MANUFACTURER" here (say, + # "-sun"), then you have to tell the case statement up towards the top + # that MANUFACTURER isn't an operating system. Otherwise, code above + # will signal an error saying that MANUFACTURER isn't an operating + # system, and we'll never get to this point. + + case $basic_machine in + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + # This also exists in the configure program, but was not the + # default. + # os=-sunos4 + ;; + m68*-cisco) + os=-aout + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-ibm) + os=-aix + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; + esac + fi + + # Here we handle the case where we know the os, and the CPU type, but not the + # manufacturer. We pick the logical manufacturer. + vendor=unknown + case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -vxsim* | -vxworks*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; + esac + + echo $basic_machine$os + exit 0 + + # Local variables: + # eval: (add-hook 'write-file-hooks 'time-stamp) + # time-stamp-start: "timestamp='" + # time-stamp-format: "%:y-%02m-%02d" + # time-stamp-end: "'" + # End: diff -crN ./OTHERS/fontconfig/configure /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/configure *** ./OTHERS/fontconfig/configure Thu Jan 1 01:00:00 1970 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/configure Tue Nov 15 17:06:05 2005 *************** *** 0 **** --- 1,11647 ---- + #! /bin/sh + # Guess values for system-dependent variables and create Makefiles. + # Generated by GNU Autoconf 2.59. + # + # Copyright (C) 2003 Free Software Foundation, Inc. + # This configure script is free software; the Free Software Foundation + # gives unlimited permission to copy, distribute and modify it. + ## --------------------- ## + ## M4sh Initialization. ## + ## --------------------- ## + + # Be Bourne compatible + if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix + fi + DUALCASE=1; export DUALCASE # for MKS sh + + # Support unset when possible. + if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset + else + as_unset=false + fi + + + # Work around bugs in pre-3.0 UWIN ksh. + $as_unset ENV MAIL MAILPATH + PS1='$ ' + PS2='> ' + PS4='+ ' + + # NLS nuisances. + for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME + do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi + done + + # Required to use basename. + if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr + else + as_expr=false + fi + + if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename + else + as_basename=false + fi + + + # Name of the executable. + as_me=`$as_basename "$0" || + $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || + echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + + # PATH needs CR, and LINENO needs CR and PATH. + # Avoid depending upon Character Ranges. + as_cr_letters='abcdefghijklmnopqrstuvwxyz' + as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' + as_cr_Letters=$as_cr_letters$as_cr_LETTERS + as_cr_digits='0123456789' + as_cr_alnum=$as_cr_Letters$as_cr_digits + + # The user is always right. + if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh + fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done + done + ;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit + } + + + case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' + ' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; + esac + + if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr + else + as_expr=false + fi + + rm -f conf$$ conf$$.exe conf$$.file + echo >conf$$.file + if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi + rm -f conf$$ conf$$.exe conf$$.file + + if mkdir -p . 2>/dev/null; then + as_mkdir_p=: + else + test -d ./-p && rmdir ./-p + as_mkdir_p=false + fi + + as_executable_p="test -f" + + # Sed expression to map a string onto a valid CPP name. + as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + + # Sed expression to map a string onto a valid variable name. + as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + + # IFS + # We need space, tab and new line, in precisely that order. + as_nl=' + ' + IFS=" $as_nl" + + # CDPATH. + $as_unset CDPATH + + + # Find the correct PATH separator. Usually this is `:', but + # DJGPP uses `;' like DOS. + if test "X${PATH_SEPARATOR+set}" != Xset; then + UNAME=${UNAME-`uname 2>/dev/null`} + case X$UNAME in + *-DOS) lt_cv_sys_path_separator=';' ;; + *) lt_cv_sys_path_separator=':' ;; + esac + PATH_SEPARATOR=$lt_cv_sys_path_separator + fi + + + # Check that we are running under the correct shell. + SHELL=${CONFIG_SHELL-/bin/sh} + + case X$ECHO in + X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` + ;; + esac + + echo=${ECHO-echo} + if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift + elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : + elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then + # Yippee, $echo works! + : + else + # Restart under the correct shell. + exec $SHELL "$0" --no-reexec ${1+"$@"} + fi + + if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat </dev/null && + echo_test_string="`eval $cmd`" && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null + then + break + fi + done + fi + + if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : + else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$dir/echo" + break + fi + done + IFS="$save_ifs" + + if test "X$echo" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + echo='print -r' + elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} + else + # Try using printf. + echo='printf %s\n' + if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + echo="$CONFIG_SHELL $0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$CONFIG_SHELL $0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do + if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "$0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} + else + # Oops. We lost completely, so just stick with echo. + echo=echo + fi + fi + fi + fi + fi + fi + + # Copy echo and quote the copy suitably for passing to libtool from + # the Makefile, instead of quoting the original, which is used later. + ECHO=$echo + if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then + ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" + fi + + + + # Name of the host. + # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, + # so uname gets run too. + ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + + exec 6>&1 + + # + # Initializations. + # + ac_default_prefix=/usr/local + ac_config_libobj_dir=. + cross_compiling=no + subdirs= + MFLAGS= + MAKEFLAGS= + SHELL=${CONFIG_SHELL-/bin/sh} + + # Maximum number of lines to put in a shell here document. + # This variable seems obsolete. It should probably be removed, and + # only ac_max_sed_lines should be used. + : ${ac_max_here_lines=38} + + # Identity of this package. + PACKAGE_NAME= + PACKAGE_TARNAME= + PACKAGE_VERSION= + PACKAGE_STRING= + PACKAGE_BUGREPORT= + + ac_unique_file="fonts.dtd" + # Factoring default headers for most tests. + ac_includes_default="\ + #include + #if HAVE_SYS_TYPES_H + # include + #endif + #if HAVE_SYS_STAT_H + # include + #endif + #if STDC_HEADERS + # include + # include + #else + # if HAVE_STDLIB_H + # include + # endif + #endif + #if HAVE_STRING_H + # if !STDC_HEADERS && HAVE_MEMORY_H + # include + # endif + # include + #endif + #if HAVE_STRINGS_H + # include + #endif + #if HAVE_INTTYPES_H + # include + #else + # if HAVE_STDINT_H + # include + # endif + #endif + #if HAVE_UNISTD_H + # include + #endif" + + ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar LT_CURRENT LT_REVISION LT_VERSION_INFO LT_CURRENT_MINUS_AGE CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE LN_S build build_cpu build_vendor build_os host host_cpu host_vendor host_os ECHO RANLIB ac_ct_RANLIB CPP EGREP LIBTOOL OS_WIN32_TRUE OS_WIN32_FALSE ms_librarian MS_LIB_AVAILABLE_TRUE MS_LIB_AVAILABLE_FALSE ft_config FREETYPE_LIBS FREETYPE_CFLAGS HAVE_XMLPARSE_H HAVE_EXPAT EXPAT_LIBS EXPAT_CFLAGS FC_DEFAULT_FONTS FC_ADD_FONTS FC_FONTPATH FC_FONTDATE confdir CONFDIR ORTH_FILES HASDOCBOOK ENABLE_DOCS_TRUE ENABLE_DOCS_FALSE DOCDIR LIBOBJS LTLIBOBJS' + ac_subst_files='' + + # Initialize some variables set by options. + ac_init_help= + ac_init_version=false + # The variables have the same names as the options, with + # dashes changed to underlines. + cache_file=/dev/null + exec_prefix=NONE + no_create= + no_recursion= + prefix=NONE + program_prefix=NONE + program_suffix=NONE + program_transform_name=s,x,x, + silent= + site= + srcdir= + verbose= + x_includes=NONE + x_libraries=NONE + + # Installation directory options. + # These are left unexpanded so users can "make install exec_prefix=/foo" + # and all the variables that are supposed to be based on exec_prefix + # by default will actually change. + # Use braces instead of parens because sh, perl, etc. also accept them. + bindir='${exec_prefix}/bin' + sbindir='${exec_prefix}/sbin' + libexecdir='${exec_prefix}/libexec' + datadir='${prefix}/share' + sysconfdir='${prefix}/etc' + sharedstatedir='${prefix}/com' + localstatedir='${prefix}/var' + libdir='${exec_prefix}/lib' + includedir='${prefix}/include' + oldincludedir='/usr/include' + infodir='${prefix}/info' + mandir='${prefix}/man' + + ac_prev= + for ac_option + do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval "$ac_prev=\$ac_option" + ac_prev= + continue + fi + + ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_option in + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ + | --da=*) + datadir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + eval "enable_$ac_feature=no" ;; + + -enable-* | --enable-*) + ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; + *) ac_optarg=yes ;; + esac + eval "enable_$ac_feature='$ac_optarg'" ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst \ + | --locals | --local | --loca | --loc | --lo) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* \ + | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package| sed 's/-/_/g'` + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; + *) ac_optarg=yes ;; + esac + eval "with_$ac_package='$ac_optarg'" ;; + + -without-* | --without-*) + ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package | sed 's/-/_/g'` + eval "with_$ac_package=no" ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) { echo "$as_me: error: unrecognized option: $ac_option + Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } + ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` + eval "$ac_envvar='$ac_optarg'" + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + ;; + + esac + done + + if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + { echo "$as_me: error: missing argument to $ac_option" >&2 + { (exit 1); exit 1; }; } + fi + + # Be sure to have absolute paths. + for ac_var in exec_prefix prefix + do + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* | NONE | '' ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; + esac + done + + # Be sure to have absolute paths. + for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ + localstatedir libdir includedir oldincludedir infodir mandir + do + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; + esac + done + + # There might be people who depend on the old broken behavior: `$host' + # used to hold the argument of --host etc. + # FIXME: To remove some day. + build=$build_alias + host=$host_alias + target=$target_alias + + # FIXME: To remove some day. + if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used." >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi + fi + + ac_tool_prefix= + test -n "$host_alias" && ac_tool_prefix=$host_alias- + + test "$silent" = yes && exec 6>/dev/null + + + # Find the source files, if location was not specified. + if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then its parent. + ac_confdir=`(dirname "$0") 2>/dev/null || + $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || + echo X"$0" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r $srcdir/$ac_unique_file; then + srcdir=.. + fi + else + ac_srcdir_defaulted=no + fi + if test ! -r $srcdir/$ac_unique_file; then + if test "$ac_srcdir_defaulted" = yes; then + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 + { (exit 1); exit 1; }; } + else + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } + fi + fi + (cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || + { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 + { (exit 1); exit 1; }; } + srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` + ac_env_build_alias_set=${build_alias+set} + ac_env_build_alias_value=$build_alias + ac_cv_env_build_alias_set=${build_alias+set} + ac_cv_env_build_alias_value=$build_alias + ac_env_host_alias_set=${host_alias+set} + ac_env_host_alias_value=$host_alias + ac_cv_env_host_alias_set=${host_alias+set} + ac_cv_env_host_alias_value=$host_alias + ac_env_target_alias_set=${target_alias+set} + ac_env_target_alias_value=$target_alias + ac_cv_env_target_alias_set=${target_alias+set} + ac_cv_env_target_alias_value=$target_alias + ac_env_CC_set=${CC+set} + ac_env_CC_value=$CC + ac_cv_env_CC_set=${CC+set} + ac_cv_env_CC_value=$CC + ac_env_CFLAGS_set=${CFLAGS+set} + ac_env_CFLAGS_value=$CFLAGS + ac_cv_env_CFLAGS_set=${CFLAGS+set} + ac_cv_env_CFLAGS_value=$CFLAGS + ac_env_LDFLAGS_set=${LDFLAGS+set} + ac_env_LDFLAGS_value=$LDFLAGS + ac_cv_env_LDFLAGS_set=${LDFLAGS+set} + ac_cv_env_LDFLAGS_value=$LDFLAGS + ac_env_CPPFLAGS_set=${CPPFLAGS+set} + ac_env_CPPFLAGS_value=$CPPFLAGS + ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} + ac_cv_env_CPPFLAGS_value=$CPPFLAGS + ac_env_CPP_set=${CPP+set} + ac_env_CPP_value=$CPP + ac_cv_env_CPP_set=${CPP+set} + ac_cv_env_CPP_value=$CPP + + # + # Report the --help message. + # + if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF + \`configure' configures this package to adapt to many kinds of systems. + + Usage: $0 [OPTION]... [VAR=VALUE]... + + To assign environment variables (e.g., CC, CFLAGS...), specify them as + VAR=VALUE. See below for descriptions of some of the useful variables. + + Defaults for the options are specified in brackets. + + Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + + _ACEOF + + cat <<_ACEOF + Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + + By default, \`make install' will install all the files in + \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify + an installation prefix other than \`$ac_default_prefix' using \`--prefix', + for instance \`--prefix=\$HOME'. + + For better control, use the options below. + + Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data [PREFIX/share] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --infodir=DIR info documentation [PREFIX/info] + --mandir=DIR man documentation [PREFIX/man] + _ACEOF + + cat <<\_ACEOF + + Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names + + System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] + _ACEOF + fi + + if test -n "$ac_init_help"; then + + cat <<\_ACEOF + + Optional Features: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors + --enable-shared=PKGS build shared libraries default=yes + --enable-static=PKGS build static libraries default=yes + --enable-fast-install=PKGS optimize for fast installation default=yes + --disable-libtool-lock avoid locking (might break parallel builds) + --disable-docs Don't build and install documentation + + Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-gnu-ld assume the C compiler uses GNU ld default=no + --with-pic try to use only PIC/non-PIC objects default=use both + --with-freetype-config=PROG Use FreeType configuration program PROG + --with-expat=DIR Use Expat in DIR + --with-expat-includes=DIR Use Expat includes in DIR + --with-expat-lib=DIR Use Expat library in DIR + --with-default-fonts=DIR Use fonts from DIR when config is busted + --with-add-fonts=DIR1,DIR2,...Find additional fonts in DIR1,DIR2,... + --with-confdir=DIR Use DIR to store configuration files (default /etc/fonts) + --with-docdir=DIR Use DIR to store documentation files (default ${datadir}/doc/fontconfig) + + Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have + headers in a nonstandard directory + CPP C preprocessor + + Use these variables to override the choices made by `configure' or to help + it to find libraries and programs with nonstandard names/locations. + + _ACEOF + fi + + if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + ac_popdir=`pwd` + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d $ac_dir || continue + ac_builddir=. + + if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` + else + ac_dir_suffix= ac_top_builddir= + fi + + case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; + esac + + # Do not use `cd foo && pwd` to compute absolute paths, because + # the directories may not exist. + case `pwd` in + .) ac_abs_builddir="$ac_dir";; + *) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; + esac + case $ac_abs_builddir in + .) ac_abs_top_builddir=${ac_top_builddir}.;; + *) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; + esac + case $ac_abs_builddir in + .) ac_abs_srcdir=$ac_srcdir;; + *) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; + esac + case $ac_abs_builddir in + .) ac_abs_top_srcdir=$ac_top_srcdir;; + *) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; + esac + + cd $ac_dir + # Check for guested configure; otherwise get Cygnus style configure. + if test -f $ac_srcdir/configure.gnu; then + echo + $SHELL $ac_srcdir/configure.gnu --help=recursive + elif test -f $ac_srcdir/configure; then + echo + $SHELL $ac_srcdir/configure --help=recursive + elif test -f $ac_srcdir/configure.ac || + test -f $ac_srcdir/configure.in; then + echo + $ac_configure --help + else + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi + cd $ac_popdir + done + fi + + test -n "$ac_init_help" && exit 0 + if $ac_init_version; then + cat <<\_ACEOF + + Copyright (C) 2003 Free Software Foundation, Inc. + This configure script is free software; the Free Software Foundation + gives unlimited permission to copy, distribute and modify it. + _ACEOF + exit 0 + fi + exec 5>config.log + cat >&5 <<_ACEOF + This file contains any messages produced by compilers while + running configure, to aid debugging if configure makes a mistake. + + It was created by $as_me, which was + generated by GNU Autoconf 2.59. Invocation command line was + + $ $0 $@ + + _ACEOF + { + cat <<_ASUNAME + ## --------- ## + ## Platform. ## + ## --------- ## + + hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` + uname -m = `(uname -m) 2>/dev/null || echo unknown` + uname -r = `(uname -r) 2>/dev/null || echo unknown` + uname -s = `(uname -s) 2>/dev/null || echo unknown` + uname -v = `(uname -v) 2>/dev/null || echo unknown` + + /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` + /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + + /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` + /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` + /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` + hostinfo = `(hostinfo) 2>/dev/null || echo unknown` + /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` + /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` + /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + + _ASUNAME + + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + echo "PATH: $as_dir" + done + + } >&5 + + cat >&5 <<_ACEOF + + + ## ----------- ## + ## Core tests. ## + ## ----------- ## + + _ACEOF + + + # Keep a trace of the command line. + # Strip out --no-create and --no-recursion so they do not pile up. + # Strip out --silent because we don't want to record it for future runs. + # Also quote any args containing shell meta-characters. + # Make two passes to allow for proper duplicate-argument suppression. + ac_configure_args= + ac_configure_args0= + ac_configure_args1= + ac_sep= + ac_must_keep_next=false + for ac_pass in 1 2 + do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 2) + ac_configure_args1="$ac_configure_args1 '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" + # Get rid of the leading space. + ac_sep=" " + ;; + esac + done + done + $as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } + $as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } + + # When interrupted or exit'd, cleanup temporary files, and complete + # config.log. We remove comments because anyway the quotes in there + # would cause problems or look ugly. + # WARNING: Be sure not to use single quotes in there, as some shells, + # such as our DU 5.0 friend, will then `close' the trap. + trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + cat <<\_ASBOX + ## ---------------- ## + ## Cache variables. ## + ## ---------------- ## + _ASBOX + echo + # The following way of writing the cache mishandles newlines in values, + { + (set) 2>&1 | + case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in + *ac_space=\ *) + sed -n \ + "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" + ;; + *) + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; + } + echo + + cat <<\_ASBOX + ## ----------------- ## + ## Output variables. ## + ## ----------------- ## + _ASBOX + echo + for ac_var in $ac_subst_vars + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX + ## ------------- ## + ## Output files. ## + ## ------------- ## + _ASBOX + echo + for ac_var in $ac_subst_files + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + fi + + if test -s confdefs.h; then + cat <<\_ASBOX + ## ----------- ## + ## confdefs.h. ## + ## ----------- ## + _ASBOX + echo + sed "/^$/d" confdefs.h | sort + echo + fi + test "$ac_signal" != 0 && + echo "$as_me: caught signal $ac_signal" + echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core && + rm -rf conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status + ' 0 + for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal + done + ac_signal=0 + + # confdefs.h avoids OS command line length limits that DEFS can exceed. + rm -rf conftest* confdefs.h + # AIX cpp loses on an empty file, so make sure it contains at least a newline. + echo >confdefs.h + + # Predefined preprocessor variables. + + cat >>confdefs.h <<_ACEOF + #define PACKAGE_NAME "$PACKAGE_NAME" + _ACEOF + + + cat >>confdefs.h <<_ACEOF + #define PACKAGE_TARNAME "$PACKAGE_TARNAME" + _ACEOF + + + cat >>confdefs.h <<_ACEOF + #define PACKAGE_VERSION "$PACKAGE_VERSION" + _ACEOF + + + cat >>confdefs.h <<_ACEOF + #define PACKAGE_STRING "$PACKAGE_STRING" + _ACEOF + + + cat >>confdefs.h <<_ACEOF + #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" + _ACEOF + + + # Let the site file select an alternate cache file if it wants to. + # Prefer explicitly selected file to automatically selected ones. + if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi + fi + for ac_site_file in $CONFIG_SITE; do + if test -r "$ac_site_file"; then + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 + echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" + fi + done + + if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 + echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . $cache_file;; + *) . ./$cache_file;; + esac + fi + else + { echo "$as_me:$LINENO: creating cache $cache_file" >&5 + echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file + fi + + # Check that the precious variables saved in the cache have kept the same + # value. + ac_cache_corrupted=false + for ac_var in `(set) 2>&1 | + sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val="\$ac_cv_env_${ac_var}_value" + eval ac_new_val="\$ac_env_${ac_var}_value" + case $ac_old_set,$ac_new_set in + set,) + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 + echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 + echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 + echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 + echo "$as_me: former value: $ac_old_val" >&2;} + { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 + echo "$as_me: current value: $ac_new_val" >&2;} + ac_cache_corrupted=: + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + esac + fi + done + if $ac_cache_corrupted; then + { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 + echo "$as_me: error: changes in the environment can compromise the build" >&2;} + { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 + echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } + fi + + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + + + + + + + + + + + + + + + + + + + am__api_version="1.9" + ac_aux_dir= + for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do + if test -f $ac_dir/install-sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f $ac_dir/install.sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f $ac_dir/shtool; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi + done + if test -z "$ac_aux_dir"; then + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 + echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} + { (exit 1); exit 1; }; } + fi + ac_config_guess="$SHELL $ac_aux_dir/config.guess" + ac_config_sub="$SHELL $ac_aux_dir/config.sub" + ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. + + # Find a good install program. We prefer a C program (faster), + # so one script is as good as another. But avoid the broken or + # incompatible versions: + # SysV /etc/install, /usr/sbin/install + # SunOS /usr/etc/install + # IRIX /sbin/install + # AIX /bin/install + # AmigaOS /C/install, which installs bootblocks on floppy discs + # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag + # AFS /usr/afsws/bin/install, which mishandles nonexistent args + # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" + # OS/2's system install, which has a completely different semantic + # ./install, which can be erroneously created by make from ./install.sh. + echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 + echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 + if test -z "$INSTALL"; then + if test "${ac_cv_path_install+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. + case $as_dir/ in + ./ | .// | /cC/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + done + done + ;; + esac + done + + + fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. We don't cache a + # path for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the path is relative. + INSTALL=$ac_install_sh + fi + fi + echo "$as_me:$LINENO: result: $INSTALL" >&5 + echo "${ECHO_T}$INSTALL" >&6 + + # Use test -z because SunOS4 sh mishandles braces in ${var-val}. + # It thinks the first close brace ends the variable substitution. + test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + + test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + + echo "$as_me:$LINENO: checking whether build environment is sane" >&5 + echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 + # Just in case + sleep 1 + echo timestamp > conftest.file + # Do `set' in a subshell so we don't clobber the current shell's + # arguments. Must try -L first in case configure is actually a + # symlink; some systems play weird games with the mod time of symlinks + # (eg FreeBSD returns the mod time of the symlink's containing + # directory). + if ( + set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftest.file` + fi + rm -f conftest.file + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken + alias in your environment" >&5 + echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken + alias in your environment" >&2;} + { (exit 1); exit 1; }; } + fi + + test "$2" = conftest.file + ) + then + # Ok. + : + else + { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! + Check your system clock" >&5 + echo "$as_me: error: newly created file is older than distributed files! + Check your system clock" >&2;} + { (exit 1); exit 1; }; } + fi + echo "$as_me:$LINENO: result: yes" >&5 + echo "${ECHO_T}yes" >&6 + test "$program_prefix" != NONE && + program_transform_name="s,^,$program_prefix,;$program_transform_name" + # Use a double $ so make ignores it. + test "$program_suffix" != NONE && + program_transform_name="s,\$,$program_suffix,;$program_transform_name" + # Double any \ or $. echo might interpret backslashes. + # By default was `s,x,x', remove it if useless. + cat <<\_ACEOF >conftest.sed + s/[\\$]/&&/g;s/;s,x,x,$// + _ACEOF + program_transform_name=`echo $program_transform_name | sed -f conftest.sed` + rm conftest.sed + + # expand $ac_aux_dir to an absolute path + am_aux_dir=`cd $ac_aux_dir && pwd` + + test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" + # Use eval to expand $SHELL + if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " + else + am_missing_run= + { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 + echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} + fi + + if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in + # $(mkdir_p) $(somedir) + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' + else + # On NextStep and OpenStep, the `mkdir' command does not + # recognize any option. It will interpret all options as + # directories to create, and then abort because `.' already + # exists. + for d in ./-p ./--version; + do + test -d $d && rmdir $d + done + # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. + if test -f "$ac_aux_dir/mkinstalldirs"; then + mkdir_p='$(mkinstalldirs)' + else + mkdir_p='$(install_sh) -d' + fi + fi + + for ac_prog in gawk mawk nawk awk + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 + echo "$as_me:$LINENO: checking for $ac_word" >&5 + echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 + if test "${ac_cv_prog_AWK+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AWK="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done + + fi + fi + AWK=$ac_cv_prog_AWK + if test -n "$AWK"; then + echo "$as_me:$LINENO: result: $AWK" >&5 + echo "${ECHO_T}$AWK" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6 + fi + + test -n "$AWK" && break + done + + echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 + echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 + set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` + if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.make <<\_ACEOF + all: + @echo 'ac_maketemp="$(MAKE)"' + _ACEOF + # GNU make sometimes prints "make[1]: Entering...", which would confuse us. + eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` + if test -n "$ac_maketemp"; then + eval ac_cv_prog_make_${ac_make}_set=yes + else + eval ac_cv_prog_make_${ac_make}_set=no + fi + rm -f conftest.make + fi + if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then + echo "$as_me:$LINENO: result: yes" >&5 + echo "${ECHO_T}yes" >&6 + SET_MAKE= + else + echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6 + SET_MAKE="MAKE=${MAKE-make}" + fi + + rm -rf .tst 2>/dev/null + mkdir .tst 2>/dev/null + if test -d .tst; then + am__leading_dot=. + else + am__leading_dot=_ + fi + rmdir .tst 2>/dev/null + + # test to see if srcdir already configured + if test "`cd $srcdir && pwd`" != "`pwd`" && + test -f $srcdir/config.status; then + { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 + echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} + { (exit 1); exit 1; }; } + fi + + # test whether we have cygpath + if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi + fi + + + # Define the identity of the package. + PACKAGE=fontconfig + VERSION=2.2.2 + + + cat >>confdefs.h <<_ACEOF + #define PACKAGE "$PACKAGE" + _ACEOF + + + cat >>confdefs.h <<_ACEOF + #define VERSION "$VERSION" + _ACEOF + + # Some tools Automake needs. + + ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + + AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + + AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + + AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + + MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + + install_sh=${install_sh-"$am_aux_dir/install-sh"} + + # Installed binaries are usually stripped using `strip' when the user + # run `make install-strip'. However `strip' might not be the right + # tool to use in cross-compilation environments, therefore Automake + # will honor the `STRIP' environment variable to overrule this program. + if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. + set dummy ${ac_tool_prefix}strip; ac_word=$2 + echo "$as_me:$LINENO: checking for $ac_word" >&5 + echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 + if test "${ac_cv_prog_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done + + fi + fi + STRIP=$ac_cv_prog_STRIP + if test -n "$STRIP"; then + echo "$as_me:$LINENO: result: $STRIP" >&5 + echo "${ECHO_T}$STRIP" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6 + fi + + fi + if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. + set dummy strip; ac_word=$2 + echo "$as_me:$LINENO: checking for $ac_word" >&5 + echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 + if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done + + test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" + fi + fi + ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP + if test -n "$ac_ct_STRIP"; then + echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 + echo "${ECHO_T}$ac_ct_STRIP" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6 + fi + + STRIP=$ac_ct_STRIP + else + STRIP="$ac_cv_prog_STRIP" + fi + + fi + INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" + + # We need awk for the "check" target. The system "awk" is bad on + # some platforms. + # Always define AMTAR for backward compatibility. + + AMTAR=${AMTAR-"${am_missing_run}tar"} + + am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' + + + + + + + + LT_CURRENT=1 + LT_REVISION=4 + + + LT_AGE=0 + + LT_VERSION_INFO="$LT_CURRENT:$LT_REVISION:$LT_AGE" + + + LT_CURRENT_MINUS_AGE=`expr $LT_CURRENT - $LT_AGE` + + + + ac_config_headers="$ac_config_headers config.h" + + + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_c_compiler_gnu + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. + set dummy ${ac_tool_prefix}gcc; ac_word=$2 + echo "$as_me:$LINENO: checking for $ac_word" >&5 + echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 + echo "${ECHO_T}$CC" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6 + fi + + fi + if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. + set dummy gcc; ac_word=$2 + echo "$as_me:$LINENO: checking for $ac_word" >&5 + echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done + + fi + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 + echo "${ECHO_T}$ac_ct_CC" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6 + fi + + CC=$ac_ct_CC + else + CC="$ac_cv_prog_CC" + fi + + if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. + set dummy ${ac_tool_prefix}cc; ac_word=$2 + echo "$as_me:$LINENO: checking for $ac_word" >&5 + echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 + echo "${ECHO_T}$CC" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6 + fi + + fi + if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "cc", so it can be a program name with args. + set dummy cc; ac_word=$2 + echo "$as_me:$LINENO: checking for $ac_word" >&5 + echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done + + fi + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 + echo "${ECHO_T}$ac_ct_CC" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6 + fi + + CC=$ac_ct_CC + else + CC="$ac_cv_prog_CC" + fi + + fi + if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. + set dummy cc; ac_word=$2 + echo "$as_me:$LINENO: checking for $ac_word" >&5 + echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. + else + ac_prog_rejected=no + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done + + if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi + fi + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 + echo "${ECHO_T}$CC" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6 + fi + + fi + if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. + set dummy $ac_tool_prefix$ac_prog; ac_word=$2 + echo "$as_me:$LINENO: checking for $ac_word" >&5 + echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 + echo "${ECHO_T}$CC" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6 + fi + + test -n "$CC" && break + done + fi + if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 + echo "$as_me:$LINENO: checking for $ac_word" >&5 + echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done + + fi + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 + echo "${ECHO_T}$ac_ct_CC" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6 + fi + + test -n "$ac_ct_CC" && break + done + + CC=$ac_ct_CC + fi + + fi + + + test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH + See \`config.log' for more details." >&5 + echo "$as_me: error: no acceptable C compiler found in \$PATH + See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + + # Provide some information about the compiler. + echo "$as_me:$LINENO:" \ + "checking for C compiler version" >&5 + ac_compiler=`set X $ac_compile; echo $2` + { (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 + (eval $ac_compiler --version &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + { (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 + (eval $ac_compiler -v &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + { (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 + (eval $ac_compiler -V &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + + int + main () + { + + ; + return 0; + } + _ACEOF + ac_clean_files_save=$ac_clean_files + ac_clean_files="$ac_clean_files a.out a.exe b.out" + # Try to create an executable without -o first, disregard a.out. + # It will help us diagnose broken compilers, and finding out an intuition + # of exeext. + echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 + echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 + ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 + (eval $ac_link_default) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Find the output, starting from the most likely. This scheme is + # not robust to junk in `.', hence go to wildcards (a.*) only as a last + # resort. + + # Be careful to initialize this variable, since it used to be cached. + # Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. + ac_cv_exeext= + # b.out is created by i960 compilers. + for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out + do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) + ;; + conftest.$ac_ext ) + # This is the source file. + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + # FIXME: I believe we export ac_cv_exeext for Libtool, + # but it would be cool to find out if it's true. Does anybody + # maintain Libtool? --akim. + export ac_cv_exeext + break;; + * ) + break;; + esac + done + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + { { echo "$as_me:$LINENO: error: C compiler cannot create executables + See \`config.log' for more details." >&5 + echo "$as_me: error: C compiler cannot create executables + See \`config.log' for more details." >&2;} + { (exit 77); exit 77; }; } + fi + + ac_exeext=$ac_cv_exeext + echo "$as_me:$LINENO: result: $ac_file" >&5 + echo "${ECHO_T}$ac_file" >&6 + + # Check the compiler produces executables we can run. If not, either + # the compiler is broken, or we cross compile. + echo "$as_me:$LINENO: checking whether the C compiler works" >&5 + echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 + # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 + # If not cross compiling, check that we can run a simple program. + if test "$cross_compiling" != yes; then + if { ac_try='./$ac_file' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { echo "$as_me:$LINENO: error: cannot run C compiled programs. + If you meant to cross compile, use \`--host'. + See \`config.log' for more details." >&5 + echo "$as_me: error: cannot run C compiled programs. + If you meant to cross compile, use \`--host'. + See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + fi + fi + fi + echo "$as_me:$LINENO: result: yes" >&5 + echo "${ECHO_T}yes" >&6 + + rm -f a.out a.exe conftest$ac_cv_exeext b.out + ac_clean_files=$ac_clean_files_save + # Check the compiler produces executables we can run. If not, either + # the compiler is broken, or we cross compile. + echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 + echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 + echo "$as_me:$LINENO: result: $cross_compiling" >&5 + echo "${ECHO_T}$cross_compiling" >&6 + + echo "$as_me:$LINENO: checking for suffix of executables" >&5 + echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # If both `conftest.exe' and `conftest' are `present' (well, observable) + # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will + # work properly (i.e., refer to `conftest.exe'), while it won't with + # `rm'. + for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + export ac_cv_exeext + break;; + * ) break;; + esac + done + else + { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link + See \`config.log' for more details." >&5 + echo "$as_me: error: cannot compute suffix of executables: cannot compile and link + See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + fi + + rm -f conftest$ac_cv_exeext + echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 + echo "${ECHO_T}$ac_cv_exeext" >&6 + + rm -f conftest.$ac_ext + EXEEXT=$ac_cv_exeext + ac_exeext=$EXEEXT + echo "$as_me:$LINENO: checking for suffix of object files" >&5 + echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 + if test "${ac_cv_objext+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + + int + main () + { + + ; + return 0; + } + _ACEOF + rm -f conftest.o conftest.obj + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac + done + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + { { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile + See \`config.log' for more details." >&5 + echo "$as_me: error: cannot compute suffix of object files: cannot compile + See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + fi + + rm -f conftest.$ac_cv_objext conftest.$ac_ext + fi + echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 + echo "${ECHO_T}$ac_cv_objext" >&6 + OBJEXT=$ac_cv_objext + ac_objext=$OBJEXT + echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 + echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 + if test "${ac_cv_c_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + + int + main () + { + #ifndef __GNUC__ + choke me + #endif + + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_compiler_gnu=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_compiler_gnu=no + fi + rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cv_c_compiler_gnu=$ac_compiler_gnu + + fi + echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 + echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 + GCC=`test $ac_compiler_gnu = yes && echo yes` + ac_test_CFLAGS=${CFLAGS+set} + ac_save_CFLAGS=$CFLAGS + CFLAGS="-g" + echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 + echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 + if test "${ac_cv_prog_cc_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + + int + main () + { + + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_g=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_prog_cc_g=no + fi + rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + fi + echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 + echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 + if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS + elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi + else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi + fi + echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 + echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 + if test "${ac_cv_prog_cc_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_cv_prog_cc_stdc=no + ac_save_CC=$CC + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include + #include + #include + #include + /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ + struct buf { int x; }; + FILE * (*rcsopen) (struct buf *, struct stat *, int); + static char *e (p, i) + char **p; + int i; + { + return p[i]; + } + static char *f (char * (*g) (char **, int), char **p, ...) + { + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; + } + + /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std1 is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std1. */ + int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + + int test (int i, double x); + struct s1 {int (*f) (int a);}; + struct s2 {int (*f) (double a);}; + int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); + int argc; + char **argv; + int + main () + { + return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; + } + _ACEOF + # Don't try gcc -ansi; that turns off useful extensions and + # breaks some systems' header files. + # AIX -qlanglvl=ansi + # Ultrix and OSF/1 -std1 + # HP-UX 10.20 and later -Ae + # HP-UX older versions -Aa -D_HPUX_SOURCE + # SVR4 -Xc -D__EXTENSIONS__ + for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" + do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_stdc=$ac_arg + break + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + fi + rm -f conftest.err conftest.$ac_objext + done + rm -f conftest.$ac_ext conftest.$ac_objext + CC=$ac_save_CC + + fi + + case "x$ac_cv_prog_cc_stdc" in + x|xno) + echo "$as_me:$LINENO: result: none needed" >&5 + echo "${ECHO_T}none needed" >&6 ;; + *) + echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 + echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 + CC="$CC $ac_cv_prog_cc_stdc" ;; + esac + + # Some people use a C++ compiler to compile C. Since we use `exit', + # in C++ we need to declare it. In case someone uses the same compiler + # for both compiling C and C++ we need to have the C++ compiler decide + # the declaration of exit, since it's the most demanding environment. + cat >conftest.$ac_ext <<_ACEOF + #ifndef __cplusplus + choke me + #endif + _ACEOF + rm -f conftest.$ac_objext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + for ac_declaration in \ + '' \ + 'extern "C" void std::exit (int) throw (); using std::exit;' \ + 'extern "C" void std::exit (int); using std::exit;' \ + 'extern "C" void exit (int) throw ();' \ + 'extern "C" void exit (int);' \ + 'void exit (int);' + do + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_declaration + #include + int + main () + { + exit (42); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + continue + fi + rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_declaration + int + main () + { + exit (42); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + break + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + fi + rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + done + rm -f conftest* + if test -n "$ac_declaration"; then + echo '#ifdef __cplusplus' >>confdefs.h + echo $ac_declaration >>confdefs.h + echo '#endif' >>confdefs.h + fi + + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + fi + rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_c_compiler_gnu + DEPDIR="${am__leading_dot}deps" + + ac_config_commands="$ac_config_commands depfiles" + + + am_make=${MAKE-make} + cat > confinc << 'END' + am__doit: + @echo done + .PHONY: am__doit + END + # If we don't find an include directive, just comment out the code. + echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 + echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 + am__include="#" + am__quote= + _am_result=none + # First try GNU make style include. + echo "include confinc" > confmf + # We grep out `Entering directory' and `Leaving directory' + # messages which can occur if `w' ends up in MAKEFLAGS. + # In particular we don't look at `^make:' because GNU make might + # be invoked under some other name (usually "gmake"), in which + # case it prints its new name instead of `make'. + if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then + am__include=include + am__quote= + _am_result=GNU + fi + # Now try BSD make style include. + if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then + am__include=.include + am__quote="\"" + _am_result=BSD + fi + fi + + + echo "$as_me:$LINENO: result: $_am_result" >&5 + echo "${ECHO_T}$_am_result" >&6 + rm -f confinc confmf + + # Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. + if test "${enable_dependency_tracking+set}" = set; then + enableval="$enable_dependency_tracking" + + fi; + if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + fi + + + if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' + else + AMDEP_TRUE='#' + AMDEP_FALSE= + fi + + + + + depcc="$CC" am_compiler_list= + + echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 + echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 + if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + case $depmode in + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + none) break ;; + esac + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. + if depmode=$depmode \ + source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir + else + am_cv_CC_dependencies_compiler_type=none + fi + + fi + echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 + echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 + CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' + else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= + fi + + + # Find a good install program. We prefer a C program (faster), + # so one script is as good as another. But avoid the broken or + # incompatible versions: + # SysV /etc/install, /usr/sbin/install + # SunOS /usr/etc/install + # IRIX /sbin/install + # AIX /bin/install + # AmigaOS /C/install, which installs bootblocks on floppy discs + # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag + # AFS /usr/afsws/bin/install, which mishandles nonexistent args + # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" + # OS/2's system install, which has a completely different semantic + # ./install, which can be erroneously created by make from ./install.sh. + echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 + echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 + if test -z "$INSTALL"; then + if test "${ac_cv_path_install+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. + case $as_dir/ in + ./ | .// | /cC/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + done + done + ;; + esac + done + + + fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. We don't cache a + # path for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the path is relative. + INSTALL=$ac_install_sh + fi + fi + echo "$as_me:$LINENO: result: $INSTALL" >&5 + echo "${ECHO_T}$INSTALL" >&6 + + # Use test -z because SunOS4 sh mishandles braces in ${var-val}. + # It thinks the first close brace ends the variable substitution. + test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + + test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + + echo "$as_me:$LINENO: checking whether ln -s works" >&5 + echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6 + LN_S=$as_ln_s + if test "$LN_S" = "ln -s"; then + echo "$as_me:$LINENO: result: yes" >&5 + echo "${ECHO_T}yes" >&6 + else + echo "$as_me:$LINENO: result: no, using $LN_S" >&5 + echo "${ECHO_T}no, using $LN_S" >&6 + fi + + + # Check whether --enable-shared or --disable-shared was given. + if test "${enable_shared+set}" = set; then + enableval="$enable_shared" + p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," + for pkg in $enableval; do + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$ac_save_ifs" + ;; + esac + else + enable_shared=yes + fi; + # Check whether --enable-static or --disable-static was given. + if test "${enable_static+set}" = set; then + enableval="$enable_static" + p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," + for pkg in $enableval; do + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$ac_save_ifs" + ;; + esac + else + enable_static=yes + fi; + # Check whether --enable-fast-install or --disable-fast-install was given. + if test "${enable_fast_install+set}" = set; then + enableval="$enable_fast_install" + p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," + for pkg in $enableval; do + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$ac_save_ifs" + ;; + esac + else + enable_fast_install=yes + fi; + # Make sure we can run config.sub. + $ac_config_sub sun4 >/dev/null 2>&1 || + { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 + echo "$as_me: error: cannot run $ac_config_sub" >&2;} + { (exit 1); exit 1; }; } + + echo "$as_me:$LINENO: checking build system type" >&5 + echo $ECHO_N "checking build system type... $ECHO_C" >&6 + if test "${ac_cv_build+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_cv_build_alias=$build_alias + test -z "$ac_cv_build_alias" && + ac_cv_build_alias=`$ac_config_guess` + test -z "$ac_cv_build_alias" && + { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 + echo "$as_me: error: cannot guess build type; you must specify one" >&2;} + { (exit 1); exit 1; }; } + ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 + echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} + { (exit 1); exit 1; }; } + + fi + echo "$as_me:$LINENO: result: $ac_cv_build" >&5 + echo "${ECHO_T}$ac_cv_build" >&6 + build=$ac_cv_build + build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` + build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` + build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + + + echo "$as_me:$LINENO: checking host system type" >&5 + echo $ECHO_N "checking host system type... $ECHO_C" >&6 + if test "${ac_cv_host+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_cv_host_alias=$host_alias + test -z "$ac_cv_host_alias" && + ac_cv_host_alias=$ac_cv_build_alias + ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 + echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} + { (exit 1); exit 1; }; } + + fi + echo "$as_me:$LINENO: result: $ac_cv_host" >&5 + echo "${ECHO_T}$ac_cv_host" >&6 + host=$ac_cv_host + host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` + host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` + host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + + + # Find the correct PATH separator. Usually this is `:', but + # DJGPP uses `;' like DOS. + if test "X${PATH_SEPARATOR+set}" != Xset; then + UNAME=${UNAME-`uname 2>/dev/null`} + case X$UNAME in + *-DOS) lt_cv_sys_path_separator=';' ;; + *) lt_cv_sys_path_separator=':' ;; + esac + PATH_SEPARATOR=$lt_cv_sys_path_separator + fi + + + # Check whether --with-gnu-ld or --without-gnu-ld was given. + if test "${with_gnu_ld+set}" = set; then + withval="$with_gnu_ld" + test "$withval" = no || with_gnu_ld=yes + else + with_gnu_ld=no + fi; + ac_prog=ld + if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + echo "$as_me:$LINENO: checking for ld used by GCC" >&5 + echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6 + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | [A-Za-z]:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the path of ld + ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac + elif test "$with_gnu_ld" = yes; then + echo "$as_me:$LINENO: checking for GNU ld" >&5 + echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 + else + echo "$as_me:$LINENO: checking for non-GNU ld" >&5 + echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 + fi + if test "${lt_cv_path_LD+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -z "$LD"; then + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some GNU ld's only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then + test "$with_gnu_ld" != no && break + else + test "$with_gnu_ld" != yes && break + fi + fi + done + IFS="$ac_save_ifs" + else + lt_cv_path_LD="$LD" # Let the user override the test with a path. + fi + fi + + LD="$lt_cv_path_LD" + if test -n "$LD"; then + echo "$as_me:$LINENO: result: $LD" >&5 + echo "${ECHO_T}$LD" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6 + fi + test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 + echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} + { (exit 1); exit 1; }; } + echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 + echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 + if test "${lt_cv_prog_gnu_ld+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + # I'd rather use --version here, but apparently some GNU ld's only accept -v. + if $LD -v 2>&1 &5; then + lt_cv_prog_gnu_ld=yes + else + lt_cv_prog_gnu_ld=no + fi + fi + echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 + echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 + with_gnu_ld=$lt_cv_prog_gnu_ld + + + echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 + echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6 + if test "${lt_cv_ld_reload_flag+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_ld_reload_flag='-r' + fi + echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 + echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6 + reload_flag=$lt_cv_ld_reload_flag + test -n "$reload_flag" && reload_flag=" $reload_flag" + + echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 + echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6 + if test "${lt_cv_path_NM+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" + else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do + test -z "$ac_dir" && ac_dir=. + tmp_nm=$ac_dir/${ac_tool_prefix}nm + if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then + # AIX needs to suppress demangling for C++ to work correctly + # AIX nm : The default is to demangle all C++ symbol names + # GNU nm : The default is to not demangle low-level symbol names. + case $host_os in + aix*) + # check if we are using GNU nm on AIX + if $tmp_nm -V 2> /dev/null | grep GNU 2>&1 > /dev/null + then + lt_cv_path_NM="$tmp_nm -B" + else + lt_cv_path_NM="$tmp_nm -BC" + fi + ;; + *) + lt_cv_path_NM="$tmp_nm -B" + ;; + esac + break + elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then + lt_cv_path_NM="$tmp_nm -p" + break + else + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + fi + fi + done + IFS="$ac_save_ifs" + test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm + fi + fi + + NM="$lt_cv_path_NM" + echo "$as_me:$LINENO: result: $NM" >&5 + echo "${ECHO_T}$NM" >&6 + + echo "$as_me:$LINENO: checking how to recognise dependant libraries" >&5 + echo $ECHO_N "checking how to recognise dependant libraries... $ECHO_C" >&6 + if test "${lt_cv_deplibs_check_method+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_file_magic_cmd='$MAGIC_CMD' + lt_cv_file_magic_test_file= + lt_cv_deplibs_check_method='unknown' + # Need to set the preceding variable on all platforms that support + # interlibrary dependencies. + # 'none' -- dependencies not supported. + # `unknown' -- same as none, but documents that we really don't know. + # 'pass_all' -- all dependencies passed with no checks. + # 'test_compile' -- check by making test program. + # 'file_magic [[regex]]' -- check by looking for files in library path + # which responds to the $file_magic_cmd with a given egrep regex. + # If you have `file' or equivalent on your system and you're not sure + # whether `pass_all' will *always* work, you probably want this one. + + case $host_os in + aix4* | aix5*) + lt_cv_deplibs_check_method=pass_all + ;; + + beos*) + lt_cv_deplibs_check_method=pass_all + ;; + + bsdi4*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + + cygwin* | mingw* | pw32*) + lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + + darwin* | rhapsody*) + lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' + lt_cv_file_magic_cmd='/usr/bin/file -L' + case "$host_os" in + rhapsody* | darwin1.[012]) + lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1` + ;; + *) # Darwin 1.3 on + lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' + ;; + esac + ;; + + freebsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + + gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + + hpux10.20*|hpux11*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + + irix5* | irix6*) + case $host_os in + irix5*) + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" + ;; + *) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1" + ;; + esac + lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` + lt_cv_deplibs_check_method=pass_all + ;; + + # This must be Linux ELF. + linux-gnu*) + case $host_cpu in + alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* ) + lt_cv_deplibs_check_method=pass_all ;; + *) + # glibc up to 2.1.1 does not perform some relocations on ARM + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; + esac + lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$' + fi + ;; + + newos6*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + + openbsd*) + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object' + else + lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' + fi + ;; + + osf3* | osf4* | osf5*) + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' + lt_cv_file_magic_test_file=/shlib/libc.so + lt_cv_deplibs_check_method=pass_all + ;; + + sco3.2v5*) + lt_cv_deplibs_check_method=pass_all + ;; + + solaris*) + lt_cv_deplibs_check_method=pass_all + lt_cv_file_magic_test_file=/lib/libc.so + ;; + + sysv5uw[78]* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + esac + ;; + esac + + fi + echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 + echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6 + file_magic_cmd=$lt_cv_file_magic_cmd + deplibs_check_method=$lt_cv_deplibs_check_method + + + + + + + + + # Check for command to grab the raw symbol name followed by C symbol from nm. + echo "$as_me:$LINENO: checking command to parse $NM output" >&5 + echo $ECHO_N "checking command to parse $NM output... $ECHO_C" >&6 + if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + + # These are sane defaults that work on at least a few old systems. + # [They come from Ultrix. What could be older than Ultrix?!! ;)] + + # Character class describing NM global symbol codes. + symcode='[BCDEGRST]' + + # Regexp to match symbols that can be accessed directly from C. + sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + + # Transform the above into a raw symbol and a C symbol. + symxfrm='\1 \2\3 \3' + + # Transform an extracted symbol line into a proper C declaration + lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" + + # Transform an extracted symbol line into symbol name and symbol address + lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + + # Define system-specific variables. + case $host_os in + aix*) + symcode='[BCDT]' + ;; + cygwin* | mingw* | pw32*) + symcode='[ABCDGISTW]' + ;; + hpux*) # Its linker distinguishes data from code symbols + lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + ;; + irix*) + symcode='[BCDEGRST]' + ;; + solaris* | sysv5*) + symcode='[BDT]' + ;; + sysv4) + symcode='[DFNSTU]' + ;; + esac + + # Handle CRLF in mingw tool chain + opt_cr= + case $host_os in + mingw*) + opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; + esac + + # If we're using GNU nm, then use its standard symbol codes. + if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then + symcode='[ABCDGISTW]' + fi + + # Try without a prefix undercore, then with it. + for ac_symprfx in "" "_"; do + + # Write the raw and C identifiers. + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" + + # Check to see that the pipe works correctly. + pipe_works=no + rm -f conftest* + cat > conftest.$ac_ext <&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Now try to grab the symbols. + nlist=conftest.nm + if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 + (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if egrep ' nm_test_var$' "$nlist" >/dev/null; then + if egrep ' nm_test_func$' "$nlist" >/dev/null; then + cat < conftest.$ac_ext + #ifdef __cplusplus + extern "C" { + #endif + + EOF + # Now generate the symbol file. + eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext' + + cat <> conftest.$ac_ext + #if defined (__STDC__) && __STDC__ + # define lt_ptr void * + #else + # define lt_ptr char * + # define const + #endif + + /* The mapping between symbol names and symbols. */ + const struct { + const char *name; + lt_ptr address; + } + lt_preloaded_symbols[] = + { + EOF + sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext + cat <<\EOF >> conftest.$ac_ext + {0, (lt_ptr) 0} + }; + + #ifdef __cplusplus + } + #endif + EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + save_LIBS="$LIBS" + save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$no_builtin_flag" + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest; then + pipe_works=yes + fi + LIBS="$save_LIBS" + CFLAGS="$save_CFLAGS" + else + echo "cannot find nm_test_func in $nlist" >&5 + fi + else + echo "cannot find nm_test_var in $nlist" >&5 + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 + fi + else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + fi + rm -f conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi + done + + fi + + global_symbol_pipe="$lt_cv_sys_global_symbol_pipe" + if test -z "$lt_cv_sys_global_symbol_pipe"; then + global_symbol_to_cdecl= + global_symbol_to_c_name_address= + else + global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl" + global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address" + fi + if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address"; + then + echo "$as_me:$LINENO: result: failed" >&5 + echo "${ECHO_T}failed" >&6 + else + echo "$as_me:$LINENO: result: ok" >&5 + echo "${ECHO_T}ok" >&6 + fi + + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_c_compiler_gnu + echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 + echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 + # On Suns, sometimes $CPP names a directory. + if test -n "$CPP" && test -d "$CPP"; then + CPP= + fi + if test -z "$CPP"; then + if test "${ac_cv_prog_CPP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false + for ac_c_preproc_warn_flag in '' yes + do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #ifdef __STDC__ + # include + #else + # include + #endif + Syntax error + _ACEOF + if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi + else + ac_cpp_err=yes + fi + if test -z "$ac_cpp_err"; then + : + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. + continue + fi + rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include + _ACEOF + if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi + else + ac_cpp_err=yes + fi + if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. + continue + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. + ac_preproc_ok=: + break + fi + rm -f conftest.err conftest.$ac_ext + + done + # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. + rm -f conftest.err conftest.$ac_ext + if $ac_preproc_ok; then + break + fi + + done + ac_cv_prog_CPP=$CPP + + fi + CPP=$ac_cv_prog_CPP + else + ac_cv_prog_CPP=$CPP + fi + echo "$as_me:$LINENO: result: $CPP" >&5 + echo "${ECHO_T}$CPP" >&6 + ac_preproc_ok=false + for ac_c_preproc_warn_flag in '' yes + do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #ifdef __STDC__ + # include + #else + # include + #endif + Syntax error + _ACEOF + if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi + else + ac_cpp_err=yes + fi + if test -z "$ac_cpp_err"; then + : + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. + continue + fi + rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include + _ACEOF + if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi + else + ac_cpp_err=yes + fi + if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. + continue + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. + ac_preproc_ok=: + break + fi + rm -f conftest.err conftest.$ac_ext + + done + # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. + rm -f conftest.err conftest.$ac_ext + if $ac_preproc_ok; then + : + else + { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check + See \`config.log' for more details." >&5 + echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check + See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + fi + + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + echo "$as_me:$LINENO: checking for egrep" >&5 + echo $ECHO_N "checking for egrep... $ECHO_C" >&6 + if test "${ac_cv_prog_egrep+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if echo a | (grep -E '(a|b)') >/dev/null 2>&1 + then ac_cv_prog_egrep='grep -E' + else ac_cv_prog_egrep='egrep' + fi + fi + echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 + echo "${ECHO_T}$ac_cv_prog_egrep" >&6 + EGREP=$ac_cv_prog_egrep + + + echo "$as_me:$LINENO: checking for ANSI C header files" >&5 + echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 + if test "${ac_cv_header_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include + #include + #include + #include + + int + main () + { + + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_header_stdc=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_header_stdc=no + fi + rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + + if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include + + _ACEOF + if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then + : + else + ac_cv_header_stdc=no + fi + rm -f conftest* + + fi + + if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include + + _ACEOF + if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then + : + else + ac_cv_header_stdc=no + fi + rm -f conftest* + + fi + + if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then + : + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include + #if ((' ' & 0x0FF) == 0x020) + # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') + # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) + #else + # define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) + # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) + #endif + + #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) + int + main () + { + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + exit(2); + exit (0); + } + _ACEOF + rm -f conftest$ac_exeext + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : + else + echo "$as_me: program exited with status $ac_status" >&5 + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ( exit $ac_status ) + ac_cv_header_stdc=no + fi + rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi + fi + fi + echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 + echo "${ECHO_T}$ac_cv_header_stdc" >&6 + if test $ac_cv_header_stdc = yes; then + + cat >>confdefs.h <<\_ACEOF + #define STDC_HEADERS 1 + _ACEOF + + fi + + # On IRIX 5.3, sys/types and inttypes.h are conflicting. + + + + + + + + + + for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h + do + as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` + echo "$as_me:$LINENO: checking for $ac_header" >&5 + echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 + if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default + + #include <$ac_header> + _ACEOF + rm -f conftest.$ac_objext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_Header=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_Header=no" + fi + rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + fi + echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 + echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 + if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 + _ACEOF + + fi + + done + + + + for ac_header in dlfcn.h + do + as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` + if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo "$as_me:$LINENO: checking for $ac_header" >&5 + echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 + if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi + echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 + echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 + else + # Is the header compilable? + echo "$as_me:$LINENO: checking $ac_header usability" >&5 + echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default + #include <$ac_header> + _ACEOF + rm -f conftest.$ac_objext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_compiler=no + fi + rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 + echo "${ECHO_T}$ac_header_compiler" >&6 + + # Is the header present? + echo "$as_me:$LINENO: checking $ac_header presence" >&5 + echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include <$ac_header> + _ACEOF + if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi + else + ac_cpp_err=yes + fi + if test -z "$ac_cpp_err"; then + ac_header_preproc=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no + fi + rm -f conftest.err conftest.$ac_ext + echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 + echo "${ECHO_T}$ac_header_preproc" >&6 + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 + echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 + echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 + echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 + echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 + echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 + echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 + echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX + ## ------------------------------------------ ## + ## Report this to the AC_PACKAGE_NAME lists. ## + ## ------------------------------------------ ## + _ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; + esac + echo "$as_me:$LINENO: checking for $ac_header" >&5 + echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 + if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + eval "$as_ac_Header=\$ac_header_preproc" + fi + echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 + echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 + + fi + if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 + _ACEOF + + fi + + done + + + + + + # Only perform the check for file, if the check method requires it + case $deplibs_check_method in + file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 + echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6 + if test "${lt_cv_path_MAGIC_CMD+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + case $MAGIC_CMD in + /*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; + ?:/*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. + ;; + *) + ac_save_MAGIC_CMD="$MAGIC_CMD" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="/usr/bin:$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/${ac_tool_prefix}file; then + lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + egrep "$file_magic_regex" > /dev/null; then + : + else + cat <&2 + + *** Warning: the command libtool uses to detect shared libraries, + *** $file_magic_cmd, produces output that libtool cannot recognize. + *** The result is that libtool may fail to recognize shared libraries + *** as such. This will affect the creation of libtool libraries that + *** depend on shared libraries, but programs linked with such libtool + *** libraries will work regardless of this problem. Nevertheless, you + *** may want to report the problem to your system manager and/or to + *** bug-libtool@gnu.org + + EOF + fi ;; + esac + fi + break + fi + done + IFS="$ac_save_ifs" + MAGIC_CMD="$ac_save_MAGIC_CMD" + ;; + esac + fi + + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if test -n "$MAGIC_CMD"; then + echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 + echo "${ECHO_T}$MAGIC_CMD" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6 + fi + + if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + echo "$as_me:$LINENO: checking for file" >&5 + echo $ECHO_N "checking for file... $ECHO_C" >&6 + if test "${lt_cv_path_MAGIC_CMD+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + case $MAGIC_CMD in + /*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; + ?:/*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. + ;; + *) + ac_save_MAGIC_CMD="$MAGIC_CMD" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="/usr/bin:$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/file; then + lt_cv_path_MAGIC_CMD="$ac_dir/file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + egrep "$file_magic_regex" > /dev/null; then + : + else + cat <&2 + + *** Warning: the command libtool uses to detect shared libraries, + *** $file_magic_cmd, produces output that libtool cannot recognize. + *** The result is that libtool may fail to recognize shared libraries + *** as such. This will affect the creation of libtool libraries that + *** depend on shared libraries, but programs linked with such libtool + *** libraries will work regardless of this problem. Nevertheless, you + *** may want to report the problem to your system manager and/or to + *** bug-libtool@gnu.org + + EOF + fi ;; + esac + fi + break + fi + done + IFS="$ac_save_ifs" + MAGIC_CMD="$ac_save_MAGIC_CMD" + ;; + esac + fi + + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if test -n "$MAGIC_CMD"; then + echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 + echo "${ECHO_T}$MAGIC_CMD" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6 + fi + + else + MAGIC_CMD=: + fi + fi + + fi + ;; + esac + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. + set dummy ${ac_tool_prefix}ranlib; ac_word=$2 + echo "$as_me:$LINENO: checking for $ac_word" >&5 + echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 + if test "${ac_cv_prog_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done + + fi + fi + RANLIB=$ac_cv_prog_RANLIB + if test -n "$RANLIB"; then + echo "$as_me:$LINENO: result: $RANLIB" >&5 + echo "${ECHO_T}$RANLIB" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6 + fi + + fi + if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. + set dummy ranlib; ac_word=$2 + echo "$as_me:$LINENO: checking for $ac_word" >&5 + echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 + if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done + + test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" + fi + fi + ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB + if test -n "$ac_ct_RANLIB"; then + echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 + echo "${ECHO_T}$ac_ct_RANLIB" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6 + fi + + RANLIB=$ac_ct_RANLIB + else + RANLIB="$ac_cv_prog_RANLIB" + fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. + set dummy ${ac_tool_prefix}strip; ac_word=$2 + echo "$as_me:$LINENO: checking for $ac_word" >&5 + echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 + if test "${ac_cv_prog_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done + + fi + fi + STRIP=$ac_cv_prog_STRIP + if test -n "$STRIP"; then + echo "$as_me:$LINENO: result: $STRIP" >&5 + echo "${ECHO_T}$STRIP" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6 + fi + + fi + if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. + set dummy strip; ac_word=$2 + echo "$as_me:$LINENO: checking for $ac_word" >&5 + echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 + if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done + + test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" + fi + fi + ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP + if test -n "$ac_ct_STRIP"; then + echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 + echo "${ECHO_T}$ac_ct_STRIP" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6 + fi + + STRIP=$ac_ct_STRIP + else + STRIP="$ac_cv_prog_STRIP" + fi + + + enable_dlopen=no + enable_win32_dll=no + + # Check whether --enable-libtool-lock or --disable-libtool-lock was given. + if test "${enable_libtool_lock+set}" = set; then + enableval="$enable_libtool_lock" + + fi; + test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + + # Some flags need to be propagated to the compiler or linker for good + # libtool support. + case $host in + *-*-irix6*) + # Find out which ABI we are using. + echo '#line 4772 "configure"' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + rm -rf conftest* + ;; + + *-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 + echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6 + if test "${lt_cv_cc_needs_belf+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + + + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_c_compiler_gnu + + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + + int + main () + { + + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + lt_cv_cc_needs_belf=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + lt_cv_cc_needs_belf=no + fi + rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_c_compiler_gnu + + fi + echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 + echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6 + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; + + + esac + + # Sed substitution that helps us do robust quoting. It backslashifies + # metacharacters that are still active within double-quoted strings. + Xsed='sed -e s/^X//' + sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' + + # Same as above, but do not quote variable references. + double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' + + # Sed substitution to delay expansion of an escaped shell variable in a + # double_quote_subst'ed string. + delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + + # Constants: + rm="rm -f" + + # Global variables: + default_ofile=libtool + can_build_shared=yes + + # All known linkers require a `.a' archive for static linking (except M$VC, + # which needs '.lib'). + libext=a + ltmain="$ac_aux_dir/ltmain.sh" + ofile="$default_ofile" + with_gnu_ld="$lt_cv_prog_gnu_ld" + need_locks="$enable_libtool_lock" + + old_CC="$CC" + old_CFLAGS="$CFLAGS" + + # Set sane defaults for various variables + test -z "$AR" && AR=ar + test -z "$AR_FLAGS" && AR_FLAGS=cru + test -z "$AS" && AS=as + test -z "$CC" && CC=cc + test -z "$DLLTOOL" && DLLTOOL=dlltool + test -z "$LD" && LD=ld + test -z "$LN_S" && LN_S="ln -s" + test -z "$MAGIC_CMD" && MAGIC_CMD=file + test -z "$NM" && NM=nm + test -z "$OBJDUMP" && OBJDUMP=objdump + test -z "$RANLIB" && RANLIB=: + test -z "$STRIP" && STRIP=: + test -z "$ac_objext" && ac_objext=o + + if test x"$host" != x"$build"; then + ac_tool_prefix=${host_alias}- + else + ac_tool_prefix= + fi + + # Transform linux* to *-*-linux-gnu*, to support old configure scripts. + case $host_os in + linux-gnu*) ;; + linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` + esac + + case $host_os in + aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; + esac + + # Determine commands to create old-style static archives. + old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' + old_postinstall_cmds='chmod 644 $oldlib' + old_postuninstall_cmds= + + if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" + ;; + *) + old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" + fi + + # Allow CC to be a program name with arguments. + set dummy $CC + compiler="$2" + + echo "$as_me:$LINENO: checking for objdir" >&5 + echo $ECHO_N "checking for objdir... $ECHO_C" >&6 + rm -f .libs 2>/dev/null + mkdir .libs 2>/dev/null + if test -d .libs; then + objdir=.libs + else + # MS-DOS does not allow filenames that begin with a dot. + objdir=_libs + fi + rmdir .libs 2>/dev/null + echo "$as_me:$LINENO: result: $objdir" >&5 + echo "${ECHO_T}$objdir" >&6 + + + + # Check whether --with-pic or --without-pic was given. + if test "${with_pic+set}" = set; then + withval="$with_pic" + pic_mode="$withval" + else + pic_mode=default + fi; + test -z "$pic_mode" && pic_mode=default + + # We assume here that the value for lt_cv_prog_cc_pic will not be cached + # in isolation, and that seeing it set (from the cache) indicates that + # the associated values are set (in the cache) correctly too. + echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 + echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 + if test "${lt_cv_prog_cc_pic+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_prog_cc_pic= + lt_cv_prog_cc_shlib= + lt_cv_prog_cc_wl= + lt_cv_prog_cc_static= + lt_cv_prog_cc_no_builtin= + lt_cv_prog_cc_can_build_shared=$can_build_shared + + if test "$GCC" = yes; then + lt_cv_prog_cc_wl='-Wl,' + lt_cv_prog_cc_static='-static' + + case $host_os in + aix*) + # Below there is a dirty hack to force normal static linking with -ldl + # The problem is because libdl dynamically linked with both libc and + # libC (AIX C++ library), which obviously doesn't included in libraries + # list by gcc. This cause undefined symbols with -static flags. + # This hack allows C programs to be linked with "-static -ldl", but + # not sure about C++ programs. + lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC" + ;; + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4' + ;; + beos* | irix5* | irix6* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_cv_prog_cc_pic='-fno-common' + ;; + cygwin* | mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_cv_prog_cc_pic='-DDLL_EXPORT' + ;; + sysv4*MP*) + if test -d /usr/nec; then + lt_cv_prog_cc_pic=-Kconform_pic + fi + ;; + *) + lt_cv_prog_cc_pic='-fPIC' + ;; + esac + else + # PORTME Check for PIC flags for the system compiler. + case $host_os in + aix3* | aix4* | aix5*) + lt_cv_prog_cc_wl='-Wl,' + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_cv_prog_cc_static='-Bstatic' + else + lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + hpux9* | hpux10* | hpux11*) + # Is there a better lt_cv_prog_cc_static that works with the bundled CC? + lt_cv_prog_cc_wl='-Wl,' + lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive" + lt_cv_prog_cc_pic='+Z' + ;; + + irix5* | irix6*) + lt_cv_prog_cc_wl='-Wl,' + lt_cv_prog_cc_static='-non_shared' + # PIC (with -KPIC) is the default. + ;; + + cygwin* | mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_cv_prog_cc_pic='-DDLL_EXPORT' + ;; + + newsos6) + lt_cv_prog_cc_pic='-KPIC' + lt_cv_prog_cc_static='-Bstatic' + ;; + + osf3* | osf4* | osf5*) + # All OSF/1 code is PIC. + lt_cv_prog_cc_wl='-Wl,' + lt_cv_prog_cc_static='-non_shared' + ;; + + sco3.2v5*) + lt_cv_prog_cc_pic='-Kpic' + lt_cv_prog_cc_static='-dn' + lt_cv_prog_cc_shlib='-belf' + ;; + + solaris*) + lt_cv_prog_cc_pic='-KPIC' + lt_cv_prog_cc_static='-Bstatic' + lt_cv_prog_cc_wl='-Wl,' + ;; + + sunos4*) + lt_cv_prog_cc_pic='-PIC' + lt_cv_prog_cc_static='-Bstatic' + lt_cv_prog_cc_wl='-Qoption ld ' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + lt_cv_prog_cc_pic='-KPIC' + lt_cv_prog_cc_static='-Bstatic' + if test "x$host_vendor" = xsni; then + lt_cv_prog_cc_wl='-LD' + else + lt_cv_prog_cc_wl='-Wl,' + fi + ;; + + uts4*) + lt_cv_prog_cc_pic='-pic' + lt_cv_prog_cc_static='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + lt_cv_prog_cc_pic='-Kconform_pic' + lt_cv_prog_cc_static='-Bstatic' + fi + ;; + + *) + lt_cv_prog_cc_can_build_shared=no + ;; + esac + fi + + fi + + if test -z "$lt_cv_prog_cc_pic"; then + echo "$as_me:$LINENO: result: none" >&5 + echo "${ECHO_T}none" >&6 + else + echo "$as_me:$LINENO: result: $lt_cv_prog_cc_pic" >&5 + echo "${ECHO_T}$lt_cv_prog_cc_pic" >&6 + + # Check to make sure the pic_flag actually works. + echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5 + echo $ECHO_N "checking if $compiler PIC flag $lt_cv_prog_cc_pic works... $ECHO_C" >&6 + if test "${lt_cv_prog_cc_pic_works+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC" + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + + int + main () + { + + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + case $host_os in + hpux9* | hpux10* | hpux11*) + # On HP-UX, both CC and GCC only warn that PIC is supported... then + # they create non-PIC objects. So, if there were any warnings, we + # assume that PIC is not supported. + if test -s conftest.err; then + lt_cv_prog_cc_pic_works=no + else + lt_cv_prog_cc_pic_works=yes + fi + ;; + *) + lt_cv_prog_cc_pic_works=yes + ;; + esac + + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + lt_cv_prog_cc_pic_works=no + + fi + rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + CFLAGS="$save_CFLAGS" + + fi + + + if test "X$lt_cv_prog_cc_pic_works" = Xno; then + lt_cv_prog_cc_pic= + lt_cv_prog_cc_can_build_shared=no + else + lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic" + fi + + echo "$as_me:$LINENO: result: $lt_cv_prog_cc_pic_works" >&5 + echo "${ECHO_T}$lt_cv_prog_cc_pic_works" >&6 + fi + + # Check for any special shared library compilation flags. + if test -n "$lt_cv_prog_cc_shlib"; then + { echo "$as_me:$LINENO: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&5 + echo "$as_me: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&2;} + if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$lt_cv_prog_cc_shlib[ ]" >/dev/null; then : + else + { echo "$as_me:$LINENO: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&5 + echo "$as_me: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&2;} + lt_cv_prog_cc_can_build_shared=no + fi + fi + + echo "$as_me:$LINENO: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5 + echo $ECHO_N "checking if $compiler static flag $lt_cv_prog_cc_static works... $ECHO_C" >&6 + if test "${lt_cv_prog_cc_static_works+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_prog_cc_static_works=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static" + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + + int + main () + { + + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + lt_cv_prog_cc_static_works=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + fi + rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" + + fi + + + # Belt *and* braces to stop my trousers falling down: + test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static= + echo "$as_me:$LINENO: result: $lt_cv_prog_cc_static_works" >&5 + echo "${ECHO_T}$lt_cv_prog_cc_static_works" >&6 + + pic_flag="$lt_cv_prog_cc_pic" + special_shlib_compile_flags="$lt_cv_prog_cc_shlib" + wl="$lt_cv_prog_cc_wl" + link_static_flag="$lt_cv_prog_cc_static" + no_builtin_flag="$lt_cv_prog_cc_no_builtin" + can_build_shared="$lt_cv_prog_cc_can_build_shared" + + + # Check to see if options -o and -c are simultaneously supported by compiler + echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 + echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 + if test "${lt_cv_compiler_c_o+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + + $rm -r conftest 2>/dev/null + mkdir conftest + cd conftest + echo "int some_variable = 0;" > conftest.$ac_ext + mkdir out + # According to Tom Tromey, Ian Lance Taylor reported there are C compilers + # that will create temporary files in the current directory regardless of + # the output directory. Thus, making CWD read-only will cause this test + # to fail, enabling locking or at least warning the user not to do parallel + # builds. + chmod -w . + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" + compiler_c_o=no + if { (eval echo configure:5334: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s out/conftest.err; then + lt_cv_compiler_c_o=no + else + lt_cv_compiler_c_o=yes + fi + else + # Append any errors to the config.log. + cat out/conftest.err 1>&5 + lt_cv_compiler_c_o=no + fi + CFLAGS="$save_CFLAGS" + chmod u+w . + $rm conftest* out/* + rmdir out + cd .. + rmdir conftest + $rm -r conftest 2>/dev/null + + fi + + compiler_c_o=$lt_cv_compiler_c_o + echo "$as_me:$LINENO: result: $compiler_c_o" >&5 + echo "${ECHO_T}$compiler_c_o" >&6 + + if test x"$compiler_c_o" = x"yes"; then + # Check to see if we can write to a .lo + echo "$as_me:$LINENO: checking if $compiler supports -c -o file.lo" >&5 + echo $ECHO_N "checking if $compiler supports -c -o file.lo... $ECHO_C" >&6 + if test "${lt_cv_compiler_o_lo+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + + lt_cv_compiler_o_lo=no + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -c -o conftest.lo" + save_objext="$ac_objext" + ac_objext=lo + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + + int + main () + { + int some_variable = 0; + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + lt_cv_compiler_o_lo=no + else + lt_cv_compiler_o_lo=yes + fi + + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + fi + rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + ac_objext="$save_objext" + CFLAGS="$save_CFLAGS" + + fi + + compiler_o_lo=$lt_cv_compiler_o_lo + echo "$as_me:$LINENO: result: $compiler_o_lo" >&5 + echo "${ECHO_T}$compiler_o_lo" >&6 + else + compiler_o_lo=no + fi + + # Check to see if we can do hard links to lock some files if needed + hard_links="nottested" + if test "$compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 + echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + echo "$as_me:$LINENO: result: $hard_links" >&5 + echo "${ECHO_T}$hard_links" >&6 + if test "$hard_links" = no; then + { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 + echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi + else + need_locks=no + fi + + if test "$GCC" = yes; then + # Check to see if options -fno-rtti -fno-exceptions are supported by compiler + echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 + echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 + echo "int some_variable = 0;" > conftest.$ac_ext + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext" + compiler_rtti_exceptions=no + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + + int + main () + { + int some_variable = 0; + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + compiler_rtti_exceptions=no + else + compiler_rtti_exceptions=yes + fi + + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + fi + rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + CFLAGS="$save_CFLAGS" + echo "$as_me:$LINENO: result: $compiler_rtti_exceptions" >&5 + echo "${ECHO_T}$compiler_rtti_exceptions" >&6 + + if test "$compiler_rtti_exceptions" = "yes"; then + no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' + else + no_builtin_flag=' -fno-builtin' + fi + fi + + # See if the linker supports building shared libraries. + echo "$as_me:$LINENO: checking whether the linker ($LD) supports shared libraries" >&5 + echo $ECHO_N "checking whether the linker ($LD) supports shared libraries... $ECHO_C" >&6 + + allow_undefined_flag= + no_undefined_flag= + need_lib_prefix=unknown + need_version=unknown + # when you set need_version to no, make sure it does not cause -set_version + # flags to be left without arguments + archive_cmds= + archive_expsym_cmds= + old_archive_from_new_cmds= + old_archive_from_expsyms_cmds= + export_dynamic_flag_spec= + use_runtimelinking= + whole_archive_flag_spec= + thread_safe_flag_spec= + hardcode_into_libs=no + hardcode_libdir_flag_spec= + hardcode_libdir_separator= + hardcode_direct=no + hardcode_minus_L=no + hardcode_shlibpath_var=unsupported + runpath_var= + link_all_deplibs=unknown + always_export_symbols=no + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms= + # exclude_expsyms can be an egrep regular expression of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + exclude_expsyms="_GLOBAL_OFFSET_TABLE_" + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + ld_shlibs=yes + if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # See if GNU ld supports shared libraries. + case $host_os in + aix3* | aix4* | aix5*) + # On AIX, the GNU linker is very broken + # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available. + ld_shlibs=no + cat <&2 + + *** Warning: the GNU linker, at least up to release 2.9.1, is reported + *** to be unable to reliably create shared libraries on AIX. + *** Therefore, libtool is disabling shared libraries support. If you + *** really care for shared libraries, you may want to modify your PATH + *** so that a non-GNU linker is found, and then restart. + + EOF + ;; + + amigaos*) + archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + + # Samuel A. Falvo II reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can use + # them. + ld_shlibs=no + ;; + + beos*) + if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; + + cygwin* | mingw* | pw32*) + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + allow_undefined_flag=unsupported + always_export_symbols=yes + + extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ + sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ + test -f $output_objdir/impgen.exe || (cd $output_objdir && \ + if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ + else $CC -o impgen impgen.c ; fi)~ + $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' + + old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' + + # cygwin and mingw dlls have different entry points and sets of symbols + # to exclude. + # FIXME: what about values for MSVC? + dll_entry=__cygwin_dll_entry@12 + dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ + case $host_os in + mingw*) + # mingw values + dll_entry=_DllMainCRTStartup@12 + dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ + ;; + esac + + # mingw and cygwin differ, and it's simplest to just exclude the union + # of the two symbol sets. + dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 + + # recent cygwin and mingw systems supply a stub DllMain which the user + # can override, but on older systems we have to supply one (in ltdll.c) + if test "x$lt_cv_need_dllmain" = "xyes"; then + ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " + ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~ + test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' + else + ltdll_obj= + ltdll_cmds= + fi + + # Extract the symbol export list from an `--export-all' def file, + # then regenerate the def file from the symbol export list, so that + # the compiled dll only exports the symbol export list. + # Be careful not to strip the DATA tag left be newer dlltools. + export_symbols_cmds="$ltdll_cmds"' + $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ + sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' + + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is. + # If DATA tags from a recent dlltool are present, honour them! + archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname-def; + else + echo EXPORTS > $output_objdir/$soname-def; + _lt_hint=1; + cat $export_symbols | while read symbol; do + set dummy \$symbol; + case \$# in + 2) echo " \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; + *) echo " \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;; + esac; + _lt_hint=`expr 1 + \$_lt_hint`; + done; + fi~ + '"$ltdll_cmds"' + $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ + $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ + $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ + $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ + $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris* | sysv5*) + if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <&2 + + *** Warning: The releases 2.8.* of the GNU linker cannot reliably + *** create shared libraries on Solaris systems. Therefore, libtool + *** is disabling shared libraries support. We urge you to upgrade GNU + *** binutils to release 2.9.1 or newer. Another option is to modify + *** your PATH or compiler configuration so that the native linker is + *** used, and then restart. + + EOF + elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + *) + if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + + if test "$ld_shlibs" = yes; then + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec='${wl}--export-dynamic' + case $host_os in + cygwin* | mingw* | pw32*) + # dlltool doesn't understand --whole-archive et. al. + whole_archive_flag_spec= + ;; + *) + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec= + fi + ;; + esac + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes && test -z "$link_static_flag"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + use_runtimelinking="" + else + aix_use_runtimelinking=yes + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + use_runtimelinking='-brtl' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + hardcode_direct=yes + archive_cmds='' + hardcode_libdir_separator=':' + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + hardcode_direct=yes + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + esac + + shared_flag='-shared' + else + # not using gcc + shared_flag='${wl}-G' + fi + + # It seems that -bexpall can do strange things, so it is better to + # generate a list of symbols to export. + always_export_symbols=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='-berok' + hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib' + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $output_objdir/$libname$release.a $output_objdir/$soname' + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib' + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='${wl}-berok' + # This is a bit strange, but is similar to how AIX traditionally builds + # it's shared libraries. + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + # see comment about different semantics on the GNU ld section + ld_shlibs=no + ;; + + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + ;; + + darwin* | rhapsody*) + case "$host_os" in + rhapsody* | darwin1.[012]) + allow_undefined_flag='-undefined suppress' + ;; + *) # Darwin 1.3 on + allow_undefined_flag='-flat_namespace -undefined suppress' + ;; + esac + # FIXME: Relying on posixy $() will cause problems for + # cross-compilation, but unfortunately the echo tests do not + # yet detect zsh echo's removal of \ escapes. + archive_cmds='$nonopt $(test "x$module" = xyes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring' + # We need to add '_' to the symbols in $export_symbols first + #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols' + hardcode_direct=yes + hardcode_shlibpath_var=no + whole_archive_flag_spec='-all_load $convenience' + ;; + + freebsd1*) + ld_shlibs=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd*) + archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + hpux9* | hpux10* | hpux11*) + case $host_os in + hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; + *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;; + esac + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + hardcode_minus_L=yes # Not in the search PATH, but as the default + # location of the library. + export_dynamic_flag_spec='${wl}-E' + ;; + + irix5* | irix6*) + if test "$GCC" = yes; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + link_all_deplibs=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + newsos6) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_shlibpath_var=no + ;; + + openbsd*) + hardcode_direct=yes + hardcode_shlibpath_var=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + else + case "$host_os" in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' + + #Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + hardcode_libdir_separator=: + ;; + + sco3.2v5*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + export_dynamic_flag_spec='${wl}-Bexport' + ;; + + solaris*) + # gcc --version < 3.0 without binutils cannot create self contained + # shared libraries reliably, requiring libgcc.a to resolve some of + # the object symbols generated in some cases. Libraries that use + # assert need libgcc.a to resolve __eprintf, for example. Linking + # a copy of libgcc.a into every shared library to guarantee resolving + # such symbols causes other problems: According to Tim Van Holder + # , C++ libraries end up with a separate + # (to the application) exception stack for one thing. + no_undefined_flag=' -z defs' + if test "$GCC" = yes; then + case `$CC --version 2>/dev/null` in + [12].*) + cat <&2 + + *** Warning: Releases of GCC earlier than version 3.0 cannot reliably + *** create self contained shared libraries on Solaris systems, without + *** introducing a dependency on libgcc.a. Therefore, libtool is disabling + *** -no-undefined support, which will at least allow you to build shared + *** libraries. However, you may find that when you link such libraries + *** into an application without using GCC, you have to manually add + *** \`gcc --print-libgcc-file-name\` to the link command. We urge you to + *** upgrade to a newer version of GCC. Another option is to rebuild your + *** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer. + + EOF + no_undefined_flag= + ;; + esac + fi + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) # Supported since Solaris 2.6 (maybe 2.5.1?) + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; + esac + link_all_deplibs=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + sysv4) + if test "x$host_vendor" = xsno; then + archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes # is this really true??? + else + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + fi + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; + + sysv5*) + no_undefined_flag=' -z text' + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + hardcode_libdir_flag_spec= + hardcode_shlibpath_var=no + runpath_var='LD_RUN_PATH' + ;; + + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs=yes + fi + ;; + + sysv4.2uw2*) + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=no + hardcode_shlibpath_var=no + hardcode_runpath_var=yes + runpath_var=LD_RUN_PATH + ;; + + sysv5uw7* | unixware7*) + no_undefined_flag='${wl}-z ${wl}text' + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + *) + ld_shlibs=no + ;; + esac + fi + echo "$as_me:$LINENO: result: $ld_shlibs" >&5 + echo "${ECHO_T}$ld_shlibs" >&6 + test "$ld_shlibs" = no && can_build_shared=no + + # Check hardcoding attributes. + echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 + echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 + hardcode_action= + if test -n "$hardcode_libdir_flag_spec" || \ + test -n "$runpath_var"; then + + # We can hardcode non-existant directories. + if test "$hardcode_direct" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$hardcode_shlibpath_var" != no && + test "$hardcode_minus_L" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate + fi + else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported + fi + echo "$as_me:$LINENO: result: $hardcode_action" >&5 + echo "${ECHO_T}$hardcode_action" >&6 + + striplib= + old_striplib= + echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 + echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 + if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + echo "$as_me:$LINENO: result: yes" >&5 + echo "${ECHO_T}yes" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6 + fi + + reload_cmds='$LD$reload_flag -o $output$reload_objs' + test -z "$deplibs_check_method" && deplibs_check_method=unknown + + # PORTME Fill in your ld.so characteristics + echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 + echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 + library_names_spec= + libname_spec='lib$name' + soname_spec= + postinstall_cmds= + postuninstall_cmds= + finish_cmds= + finish_eval= + shlibpath_var= + shlibpath_overrides_runpath=unknown + version_type=none + dynamic_linker="$host_os ld.so" + sys_lib_dlsearch_path_spec="/lib /usr/lib" + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + + case $host_os in + aix3*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}.so$major' + ;; + + aix4* | aix5*) + version_type=linux + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # We preserve .a as extension for shared libraries through AIX4.2 + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LIBPATH + hardcode_into_libs=yes + fi + ;; + + amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' + ;; + + beos*) + library_names_spec='${libname}.so' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + + bsdi4*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + export_dynamic_flag_spec=-rdynamic + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + + cygwin* | mingw* | pw32*) + version_type=windows + need_version=no + need_lib_prefix=no + case $GCC,$host_os in + yes,cygwin*) + library_names_spec='$libname.dll.a' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' + postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog .libs/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + ;; + yes,mingw*) + library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"` + ;; + yes,pw32*) + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll' + ;; + *) + library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + + darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + # FIXME: Relying on posixy $() will cause problems for + # cross-compilation, but unfortunately the echo tests do not + # yet detect zsh echo's removal of \ escapes. + library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' + soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + ;; + + freebsd1*) + dynamic_linker=no + ;; + + freebsd*) + objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + *) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + esac + ;; + + gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + + hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + dynamic_linker="$host_os dld.sl" + version_type=sunos + need_lib_prefix=no + need_version=no + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' + soname_spec='${libname}${release}.sl$major' + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + + irix5* | irix6*) + version_type=irix + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}.so$major' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' + case $host_os in + irix5*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + ;; + + # No shared lib support for Linux oldld, aout, or coff. + linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) + dynamic_linker=no + ;; + + # This must be Linux ELF. + linux-gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + + netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' + soname_spec='${libname}${release}.so$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + + newsos6) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + + openbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case "$host_os" in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + ;; + + os2*) + libname_spec='$name' + need_lib_prefix=no + library_names_spec='$libname.dll $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + + osf3* | osf4* | osf5*) + version_type=osf + need_version=no + soname_spec='${libname}${release}.so' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + + sco3.2v5*) + version_type=osf + soname_spec='${libname}${release}.so$major' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + shlibpath_var=LD_LIBRARY_PATH + ;; + + solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + + sunos4*) + version_type=sunos + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + + uts4*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + + dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' + soname_spec='$libname.so.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + + *) + dynamic_linker=no + ;; + esac + echo "$as_me:$LINENO: result: $dynamic_linker" >&5 + echo "${ECHO_T}$dynamic_linker" >&6 + test "$dynamic_linker" = no && can_build_shared=no + + # Report the final consequences. + echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 + echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 + echo "$as_me:$LINENO: result: $can_build_shared" >&5 + echo "${ECHO_T}$can_build_shared" >&6 + + echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 + echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case "$host_os" in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix4* | aix5*) + if test "$host_cpu" != ia64 ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + echo "$as_me:$LINENO: result: $enable_shared" >&5 + echo "${ECHO_T}$enable_shared" >&6 + + echo "$as_me:$LINENO: checking whether to build static libraries" >&5 + echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + echo "$as_me:$LINENO: result: $enable_static" >&5 + echo "${ECHO_T}$enable_static" >&6 + + if test "$hardcode_action" = relink; then + # Fast installation is not supported + enable_fast_install=no + elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless + fi + + variables_saved_for_relink="PATH $shlibpath_var $runpath_var" + if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" + fi + + if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown + else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + cygwin* | mingw* | pw32*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + *) + echo "$as_me:$LINENO: checking for shl_load" >&5 + echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 + if test "${ac_cv_func_shl_load+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + /* Define shl_load to an innocuous variant, in case declares shl_load. + For example, HP-UX 11i declares gettimeofday. */ + #define shl_load innocuous_shl_load + + /* System header to define __stub macros and hopefully few prototypes, + which can conflict with char shl_load (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + + #ifdef __STDC__ + # include + #else + # include + #endif + + #undef shl_load + + /* Override any gcc2 internal prototype to avoid an error. */ + #ifdef __cplusplus + extern "C" + { + #endif + /* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ + char shl_load (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ + #if defined (__stub_shl_load) || defined (__stub___shl_load) + choke me + #else + char (*f) () = shl_load; + #endif + #ifdef __cplusplus + } + #endif + + int + main () + { + return f != shl_load; + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_shl_load=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_func_shl_load=no + fi + rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + fi + echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 + echo "${ECHO_T}$ac_cv_func_shl_load" >&6 + if test $ac_cv_func_shl_load = yes; then + lt_cv_dlopen="shl_load" + else + echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 + echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 + if test "${ac_cv_lib_dld_shl_load+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-ldld $LIBS" + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + + /* Override any gcc2 internal prototype to avoid an error. */ + #ifdef __cplusplus + extern "C" + #endif + /* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ + char shl_load (); + int + main () + { + shl_load (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dld_shl_load=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dld_shl_load=no + fi + rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi + echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 + echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 + if test $ac_cv_lib_dld_shl_load = yes; then + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" + else + echo "$as_me:$LINENO: checking for dlopen" >&5 + echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 + if test "${ac_cv_func_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + /* Define dlopen to an innocuous variant, in case declares dlopen. + For example, HP-UX 11i declares gettimeofday. */ + #define dlopen innocuous_dlopen + + /* System header to define __stub macros and hopefully few prototypes, + which can conflict with char dlopen (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + + #ifdef __STDC__ + # include + #else + # include + #endif + + #undef dlopen + + /* Override any gcc2 internal prototype to avoid an error. */ + #ifdef __cplusplus + extern "C" + { + #endif + /* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ + char dlopen (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ + #if defined (__stub_dlopen) || defined (__stub___dlopen) + choke me + #else + char (*f) () = dlopen; + #endif + #ifdef __cplusplus + } + #endif + + int + main () + { + return f != dlopen; + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_dlopen=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_func_dlopen=no + fi + rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + fi + echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 + echo "${ECHO_T}$ac_cv_func_dlopen" >&6 + if test $ac_cv_func_dlopen = yes; then + lt_cv_dlopen="dlopen" + else + echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 + echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 + if test "${ac_cv_lib_dl_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-ldl $LIBS" + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + + /* Override any gcc2 internal prototype to avoid an error. */ + #ifdef __cplusplus + extern "C" + #endif + /* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ + char dlopen (); + int + main () + { + dlopen (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dl_dlopen=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dl_dlopen=no + fi + rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi + echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 + echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 + if test $ac_cv_lib_dl_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" + else + echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 + echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 + if test "${ac_cv_lib_svld_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lsvld $LIBS" + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + + /* Override any gcc2 internal prototype to avoid an error. */ + #ifdef __cplusplus + extern "C" + #endif + /* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ + char dlopen (); + int + main () + { + dlopen (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_svld_dlopen=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_svld_dlopen=no + fi + rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi + echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 + echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 + if test $ac_cv_lib_svld_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" + else + echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 + echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 + if test "${ac_cv_lib_dld_dld_link+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-ldld $LIBS" + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + + /* Override any gcc2 internal prototype to avoid an error. */ + #ifdef __cplusplus + extern "C" + #endif + /* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ + char dld_link (); + int + main () + { + dld_link (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dld_dld_link=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dld_dld_link=no + fi + rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi + echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 + echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 + if test $ac_cv_lib_dld_dld_link = yes; then + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" + fi + + + fi + + + fi + + + fi + + + fi + + + fi + + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 + echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 + if test "${lt_cv_dlopen_self+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self=cross + else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < + #endif + + #include + + #ifdef RTLD_GLOBAL + # define LT_DLGLOBAL RTLD_GLOBAL + #else + # ifdef DL_GLOBAL + # define LT_DLGLOBAL DL_GLOBAL + # else + # define LT_DLGLOBAL 0 + # endif + #endif + + /* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ + #ifndef LT_DLLAZY_OR_NOW + # ifdef RTLD_LAZY + # define LT_DLLAZY_OR_NOW RTLD_LAZY + # else + # ifdef DL_LAZY + # define LT_DLLAZY_OR_NOW DL_LAZY + # else + # ifdef RTLD_NOW + # define LT_DLLAZY_OR_NOW RTLD_NOW + # else + # ifdef DL_NOW + # define LT_DLLAZY_OR_NOW DL_NOW + # else + # define LT_DLLAZY_OR_NOW 0 + # endif + # endif + # endif + # endif + #endif + + #ifdef __cplusplus + extern "C" void exit (int); + #endif + + void fnord() { int i=42;} + int main () + { + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + + exit (status); + } + EOF + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; + x$lt_unknown|x*) lt_cv_dlopen_self=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self=no + fi + fi + rm -fr conftest* + + + fi + echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 + echo "${ECHO_T}$lt_cv_dlopen_self" >&6 + + if test "x$lt_cv_dlopen_self" = xyes; then + LDFLAGS="$LDFLAGS $link_static_flag" + echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 + echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 + if test "${lt_cv_dlopen_self_static+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self_static=cross + else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < + #endif + + #include + + #ifdef RTLD_GLOBAL + # define LT_DLGLOBAL RTLD_GLOBAL + #else + # ifdef DL_GLOBAL + # define LT_DLGLOBAL DL_GLOBAL + # else + # define LT_DLGLOBAL 0 + # endif + #endif + + /* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ + #ifndef LT_DLLAZY_OR_NOW + # ifdef RTLD_LAZY + # define LT_DLLAZY_OR_NOW RTLD_LAZY + # else + # ifdef DL_LAZY + # define LT_DLLAZY_OR_NOW DL_LAZY + # else + # ifdef RTLD_NOW + # define LT_DLLAZY_OR_NOW RTLD_NOW + # else + # ifdef DL_NOW + # define LT_DLLAZY_OR_NOW DL_NOW + # else + # define LT_DLLAZY_OR_NOW 0 + # endif + # endif + # endif + # endif + #endif + + #ifdef __cplusplus + extern "C" void exit (int); + #endif + + void fnord() { int i=42;} + int main () + { + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + + exit (status); + } + EOF + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self_static=no + fi + fi + rm -fr conftest* + + + fi + echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 + echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac + fi + + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 + echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 + if test "${lt_cv_archive_cmds_need_lc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + $rm conftest* + echo 'static int dummy;' > conftest.$ac_ext + + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_cv_prog_cc_wl + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 + (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + then + lt_cv_archive_cmds_need_lc=no + else + lt_cv_archive_cmds_need_lc=yes + fi + allow_undefined_flag=$save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + fi + + echo "$as_me:$LINENO: result: $lt_cv_archive_cmds_need_lc" >&5 + echo "${ECHO_T}$lt_cv_archive_cmds_need_lc" >&6 + ;; + esac + fi + need_lc=${lt_cv_archive_cmds_need_lc-yes} + + # The second clause should only fire when bootstrapping the + # libtool distribution, otherwise you forgot to ship ltmain.sh + # with your package, and you will get complaints that there are + # no rules to generate ltmain.sh. + if test -f "$ltmain"; then + : + else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + test -f Makefile && make "$ltmain" + fi + + if test -f "$ltmain"; then + trap "$rm \"${ofile}T\"; exit 1" 1 2 15 + $rm -f "${ofile}T" + + echo creating $ofile + + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. + for var in echo old_CC old_CFLAGS \ + AR AR_FLAGS CC LD LN_S NM SHELL \ + reload_flag reload_cmds wl \ + pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ + use_runtimelinking \ + thread_safe_flag_spec whole_archive_flag_spec libname_spec \ + library_names_spec soname_spec \ + RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ + old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \ + postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \ + old_striplib striplib file_magic_cmd export_symbols_cmds \ + deplibs_check_method allow_undefined_flag no_undefined_flag \ + finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ + global_symbol_to_c_name_address \ + hardcode_libdir_flag_spec hardcode_libdir_separator \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do + + case $var in + reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ + extract_expsyms_cmds | old_archive_from_expsyms_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done + + cat <<__EOF__ > "${ofile}T" + #! $SHELL + + # `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. + # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) + # NOTE: Changes made to this file will be lost: look at ltmain.sh. + # + # Copyright (C) 1996-2000 Free Software Foundation, Inc. + # Originally by Gordon Matzigkeit , 1996 + # + # This program is free software; you can redistribute it and/or modify + # it under the terms of the GNU General Public License as published by + # the Free Software Foundation; either version 2 of the License, or + # (at your option) any later version. + # + # This program is distributed in the hope that it will be useful, but + # WITHOUT ANY WARRANTY; without even the implied warranty of + # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + # General Public License for more details. + # + # You should have received a copy of the GNU General Public License + # along with this program; if not, write to the Free Software + # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + # + # As a special exception to the GNU General Public License, if you + # distribute this file as part of a program that contains a + # configuration script generated by Autoconf, you may include it under + # the same distribution terms that you use for the rest of that program. + + # Sed that helps us avoid accidentally triggering echo(1) options like -n. + Xsed="sed -e s/^X//" + + # The HP-UX ksh and POSIX shell print the target directory to stdout + # if CDPATH is set. + if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi + + # ### BEGIN LIBTOOL CONFIG + + # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + + # Shell to use when invoking shell scripts. + SHELL=$lt_SHELL + + # Whether or not to build shared libraries. + build_libtool_libs=$enable_shared + + # Whether or not to build static libraries. + build_old_libs=$enable_static + + # Whether or not to add -lc for building shared libraries. + build_libtool_need_lc=$need_lc + + # Whether or not to optimize for fast installation. + fast_install=$enable_fast_install + + # The host system. + host_alias=$host_alias + host=$host + + # An echo program that does not interpret backslashes. + echo=$lt_echo + + # The archiver. + AR=$lt_AR + AR_FLAGS=$lt_AR_FLAGS + + # The default C compiler. + CC=$lt_CC + + # Is the compiler the GNU C compiler? + with_gcc=$GCC + + # The linker used to build libraries. + LD=$lt_LD + + # Whether we need hard or soft links. + LN_S=$lt_LN_S + + # A BSD-compatible nm program. + NM=$lt_NM + + # A symbol stripping program + STRIP=$STRIP + + # Used to examine libraries when file_magic_cmd begins "file" + MAGIC_CMD=$MAGIC_CMD + + # Used on cygwin: DLL creation program. + DLLTOOL="$DLLTOOL" + + # Used on cygwin: object dumper. + OBJDUMP="$OBJDUMP" + + # Used on cygwin: assembler. + AS="$AS" + + # The name of the directory that contains temporary libtool files. + objdir=$objdir + + # How to create reloadable object files. + reload_flag=$lt_reload_flag + reload_cmds=$lt_reload_cmds + + # How to pass a linker flag through the compiler. + wl=$lt_wl + + # Object file suffix (normally "o"). + objext="$ac_objext" + + # Old archive suffix (normally "a"). + libext="$libext" + + # Executable file suffix (normally ""). + exeext="$exeext" + + # Additional compiler flags for building library objects. + pic_flag=$lt_pic_flag + pic_mode=$pic_mode + + # Does compiler simultaneously support -c and -o options? + compiler_c_o=$lt_compiler_c_o + + # Can we write directly to a .lo ? + compiler_o_lo=$lt_compiler_o_lo + + # Must we lock files when doing compilation ? + need_locks=$lt_need_locks + + # Do we need the lib prefix for modules? + need_lib_prefix=$need_lib_prefix + + # Do we need a version for libraries? + need_version=$need_version + + # Whether dlopen is supported. + dlopen_support=$enable_dlopen + + # Whether dlopen of programs is supported. + dlopen_self=$enable_dlopen_self + + # Whether dlopen of statically linked programs is supported. + dlopen_self_static=$enable_dlopen_self_static + + # Compiler flag to prevent dynamic linking. + link_static_flag=$lt_link_static_flag + + # Compiler flag to turn off builtin functions. + no_builtin_flag=$lt_no_builtin_flag + + # Compiler flag to allow reflexive dlopens. + export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + + # Compiler flag to allow runtime linking + use_runtimelinking=$lt_use_runtimelinking + + # Compiler flag to generate shared objects directly from archives. + whole_archive_flag_spec=$lt_whole_archive_flag_spec + + # Compiler flag to generate thread-safe objects. + thread_safe_flag_spec=$lt_thread_safe_flag_spec + + # Library versioning type. + version_type=$version_type + + # Format of library name prefix. + libname_spec=$lt_libname_spec + + # List of archive names. First name is the real one, the rest are links. + # The last name is the one that the linker finds with -lNAME. + library_names_spec=$lt_library_names_spec + + # The coded name of the library, if different from the real name. + soname_spec=$lt_soname_spec + + # Commands used to build and install an old-style archive. + RANLIB=$lt_RANLIB + old_archive_cmds=$lt_old_archive_cmds + old_postinstall_cmds=$lt_old_postinstall_cmds + old_postuninstall_cmds=$lt_old_postuninstall_cmds + + # Create an old-style archive from a shared archive. + old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + + # Create a temporary old-style archive to link instead of a shared archive. + old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + + # Commands used to build and install a shared archive. + archive_cmds=$lt_archive_cmds + archive_expsym_cmds=$lt_archive_expsym_cmds + postinstall_cmds=$lt_postinstall_cmds + postuninstall_cmds=$lt_postuninstall_cmds + + # Commands to strip libraries. + old_striplib=$lt_old_striplib + striplib=$lt_striplib + + # Method to check whether dependent libraries are shared objects. + deplibs_check_method=$lt_deplibs_check_method + + # Command to use when deplibs_check_method == file_magic. + file_magic_cmd=$lt_file_magic_cmd + + # Flag that allows shared libraries with undefined symbols to be built. + allow_undefined_flag=$lt_allow_undefined_flag + + # Flag that forces no undefined symbols. + no_undefined_flag=$lt_no_undefined_flag + + # Commands used to finish a libtool library installation in a directory. + finish_cmds=$lt_finish_cmds + + # Same as above, but a single script fragment to be evaled but not shown. + finish_eval=$lt_finish_eval + + # Take the output of nm and produce a listing of raw symbols and C names. + global_symbol_pipe=$lt_global_symbol_pipe + + # Transform the output of nm in a proper C declaration + global_symbol_to_cdecl=$lt_global_symbol_to_cdecl + + # Transform the output of nm in a C name address pair + global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address + + # This is the shared library runtime path variable. + runpath_var=$runpath_var + + # This is the shared library path variable. + shlibpath_var=$shlibpath_var + + # Is shlibpath searched before the hard-coded library search path? + shlibpath_overrides_runpath=$shlibpath_overrides_runpath + + # How to hardcode a shared library path into an executable. + hardcode_action=$hardcode_action + + # Whether we should hardcode library paths into libraries. + hardcode_into_libs=$hardcode_into_libs + + # Flag to hardcode \$libdir into a binary during linking. + # This must work even if \$libdir does not exist. + hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + + # Whether we need a single -rpath flag with a separated argument. + hardcode_libdir_separator=$lt_hardcode_libdir_separator + + # Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the + # resulting binary. + hardcode_direct=$hardcode_direct + + # Set to yes if using the -LDIR flag during linking hardcodes DIR into the + # resulting binary. + hardcode_minus_L=$hardcode_minus_L + + # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into + # the resulting binary. + hardcode_shlibpath_var=$hardcode_shlibpath_var + + # Variables whose values should be saved in libtool wrapper scripts and + # restored at relink time. + variables_saved_for_relink="$variables_saved_for_relink" + + # Whether libtool must link a program against all its dependency libraries. + link_all_deplibs=$link_all_deplibs + + # Compile-time system search path for libraries + sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + + # Run-time system search path for libraries + sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + + # Fix the shell variable \$srcfile for the compiler. + fix_srcfile_path="$fix_srcfile_path" + + # Set to yes if exported symbols are required. + always_export_symbols=$always_export_symbols + + # The commands to list exported symbols. + export_symbols_cmds=$lt_export_symbols_cmds + + # The commands to extract the exported symbol list from a shared archive. + extract_expsyms_cmds=$lt_extract_expsyms_cmds + + # Symbols that should not be listed in the preloaded symbols. + exclude_expsyms=$lt_exclude_expsyms + + # Symbols that must always be exported. + include_expsyms=$lt_include_expsyms + + # ### END LIBTOOL CONFIG + + __EOF__ + + case $host_os in + aix3*) + cat <<\EOF >> "${ofile}T" + + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + EOF + ;; + esac + + case $host_os in + cygwin* | mingw* | pw32* | os2*) + cat <<'EOF' >> "${ofile}T" + # This is a source program that is used to create dlls on Windows + # Don't remove nor modify the starting and closing comments + # /* ltdll.c starts here */ + # #define WIN32_LEAN_AND_MEAN + # #include + # #undef WIN32_LEAN_AND_MEAN + # #include + # + # #ifndef __CYGWIN__ + # # ifdef __CYGWIN32__ + # # define __CYGWIN__ __CYGWIN32__ + # # endif + # #endif + # + # #ifdef __cplusplus + # extern "C" { + # #endif + # BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); + # #ifdef __cplusplus + # } + # #endif + # + # #ifdef __CYGWIN__ + # #include + # DECLARE_CYGWIN_DLL( DllMain ); + # #endif + # HINSTANCE __hDllInstance_base; + # + # BOOL APIENTRY + # DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) + # { + # __hDllInstance_base = hInst; + # return TRUE; + # } + # /* ltdll.c ends here */ + # This is a source program that is used to create import libraries + # on Windows for dlls which lack them. Don't remove nor modify the + # starting and closing comments + # /* impgen.c starts here */ + # /* Copyright (C) 1999-2000 Free Software Foundation, Inc. + # + # This file is part of GNU libtool. + # + # This program is free software; you can redistribute it and/or modify + # it under the terms of the GNU General Public License as published by + # the Free Software Foundation; either version 2 of the License, or + # (at your option) any later version. + # + # This program is distributed in the hope that it will be useful, + # but WITHOUT ANY WARRANTY; without even the implied warranty of + # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + # GNU General Public License for more details. + # + # You should have received a copy of the GNU General Public License + # along with this program; if not, write to the Free Software + # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + # */ + # + # #include /* for printf() */ + # #include /* for open(), lseek(), read() */ + # #include /* for O_RDONLY, O_BINARY */ + # #include /* for strdup() */ + # + # /* O_BINARY isn't required (or even defined sometimes) under Unix */ + # #ifndef O_BINARY + # #define O_BINARY 0 + # #endif + # + # static unsigned int + # pe_get16 (fd, offset) + # int fd; + # int offset; + # { + # unsigned char b[2]; + # lseek (fd, offset, SEEK_SET); + # read (fd, b, 2); + # return b[0] + (b[1]<<8); + # } + # + # static unsigned int + # pe_get32 (fd, offset) + # int fd; + # int offset; + # { + # unsigned char b[4]; + # lseek (fd, offset, SEEK_SET); + # read (fd, b, 4); + # return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); + # } + # + # static unsigned int + # pe_as32 (ptr) + # void *ptr; + # { + # unsigned char *b = ptr; + # return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); + # } + # + # int + # main (argc, argv) + # int argc; + # char *argv[]; + # { + # int dll; + # unsigned long pe_header_offset, opthdr_ofs, num_entries, i; + # unsigned long export_rva, export_size, nsections, secptr, expptr; + # unsigned long name_rvas, nexp; + # unsigned char *expdata, *erva; + # char *filename, *dll_name; + # + # filename = argv[1]; + # + # dll = open(filename, O_RDONLY|O_BINARY); + # if (dll < 1) + # return 1; + # + # dll_name = filename; + # + # for (i=0; filename[i]; i++) + # if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') + # dll_name = filename + i +1; + # + # pe_header_offset = pe_get32 (dll, 0x3c); + # opthdr_ofs = pe_header_offset + 4 + 20; + # num_entries = pe_get32 (dll, opthdr_ofs + 92); + # + # if (num_entries < 1) /* no exports */ + # return 1; + # + # export_rva = pe_get32 (dll, opthdr_ofs + 96); + # export_size = pe_get32 (dll, opthdr_ofs + 100); + # nsections = pe_get16 (dll, pe_header_offset + 4 +2); + # secptr = (pe_header_offset + 4 + 20 + + # pe_get16 (dll, pe_header_offset + 4 + 16)); + # + # expptr = 0; + # for (i = 0; i < nsections; i++) + # { + # char sname[8]; + # unsigned long secptr1 = secptr + 40 * i; + # unsigned long vaddr = pe_get32 (dll, secptr1 + 12); + # unsigned long vsize = pe_get32 (dll, secptr1 + 16); + # unsigned long fptr = pe_get32 (dll, secptr1 + 20); + # lseek(dll, secptr1, SEEK_SET); + # read(dll, sname, 8); + # if (vaddr <= export_rva && vaddr+vsize > export_rva) + # { + # expptr = fptr + (export_rva - vaddr); + # if (export_rva + export_size > vaddr + vsize) + # export_size = vsize - (export_rva - vaddr); + # break; + # } + # } + # + # expdata = (unsigned char*)malloc(export_size); + # lseek (dll, expptr, SEEK_SET); + # read (dll, expdata, export_size); + # erva = expdata - export_rva; + # + # nexp = pe_as32 (expdata+24); + # name_rvas = pe_as32 (expdata+32); + # + # printf ("EXPORTS\n"); + # for (i = 0; i> "${ofile}T" || (rm -f "${ofile}T"; exit 1) + + mv -f "${ofile}T" "$ofile" || \ + (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T") + chmod +x "$ofile" + fi + + + + + + # This can be used to rebuild libtool when needed + LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" + + # Always use our own libtool. + LIBTOOL='$(SHELL) $(top_builddir)/libtool' + + # Prevent multiple expansion + + + echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 + echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 + set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` + if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.make <<\_ACEOF + all: + @echo 'ac_maketemp="$(MAKE)"' + _ACEOF + # GNU make sometimes prints "make[1]: Entering...", which would confuse us. + eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` + if test -n "$ac_maketemp"; then + eval ac_cv_prog_make_${ac_make}_set=yes + else + eval ac_cv_prog_make_${ac_make}_set=no + fi + rm -f conftest.make + fi + if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then + echo "$as_me:$LINENO: result: yes" >&5 + echo "${ECHO_T}yes" >&6 + SET_MAKE= + else + echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6 + SET_MAKE="MAKE=${MAKE-make}" + fi + + + + case "$host" in + *-*-mingw*) + os_win32=yes + ;; + *) + os_win32=no + esac + + + if test "$os_win32" = "yes"; then + OS_WIN32_TRUE= + OS_WIN32_FALSE='#' + else + OS_WIN32_TRUE='#' + OS_WIN32_FALSE= + fi + + + if test "$os_win32" = "yes"; then + # Extract the first word of "lib.exe", so it can be a program name with args. + set dummy lib.exe; ac_word=$2 + echo "$as_me:$LINENO: checking for $ac_word" >&5 + echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 + if test "${ac_cv_prog_ms_librarian+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$ms_librarian"; then + ac_cv_prog_ms_librarian="$ms_librarian" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ms_librarian="yes" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done + + test -z "$ac_cv_prog_ms_librarian" && ac_cv_prog_ms_librarian="no" + fi + fi + ms_librarian=$ac_cv_prog_ms_librarian + if test -n "$ms_librarian"; then + echo "$as_me:$LINENO: result: $ms_librarian" >&5 + echo "${ECHO_T}$ms_librarian" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6 + fi + + fi + + + if test x$ms_librarian = xyes; then + MS_LIB_AVAILABLE_TRUE= + MS_LIB_AVAILABLE_FALSE='#' + else + MS_LIB_AVAILABLE_TRUE='#' + MS_LIB_AVAILABLE_FALSE= + fi + + + + # Checks for header files. + + + + + + ac_header_dirent=no + for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do + as_ac_Header=`echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh` + echo "$as_me:$LINENO: checking for $ac_hdr that defines DIR" >&5 + echo $ECHO_N "checking for $ac_hdr that defines DIR... $ECHO_C" >&6 + if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include + #include <$ac_hdr> + + int + main () + { + if ((DIR *) 0) + return 0; + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_Header=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_Header=no" + fi + rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + fi + echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 + echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 + if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_hdr" | $as_tr_cpp` 1 + _ACEOF + + ac_header_dirent=$ac_hdr; break + fi + + done + # Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. + if test $ac_header_dirent = dirent.h; then + echo "$as_me:$LINENO: checking for library containing opendir" >&5 + echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6 + if test "${ac_cv_search_opendir+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_func_search_save_LIBS=$LIBS + ac_cv_search_opendir=no + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + + /* Override any gcc2 internal prototype to avoid an error. */ + #ifdef __cplusplus + extern "C" + #endif + /* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ + char opendir (); + int + main () + { + opendir (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_search_opendir="none required" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + fi + rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test "$ac_cv_search_opendir" = no; then + for ac_lib in dir; do + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + + /* Override any gcc2 internal prototype to avoid an error. */ + #ifdef __cplusplus + extern "C" + #endif + /* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ + char opendir (); + int + main () + { + opendir (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_search_opendir="-l$ac_lib" + break + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + fi + rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + done + fi + LIBS=$ac_func_search_save_LIBS + fi + echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5 + echo "${ECHO_T}$ac_cv_search_opendir" >&6 + if test "$ac_cv_search_opendir" != no; then + test "$ac_cv_search_opendir" = "none required" || LIBS="$ac_cv_search_opendir $LIBS" + + fi + + else + echo "$as_me:$LINENO: checking for library containing opendir" >&5 + echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6 + if test "${ac_cv_search_opendir+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_func_search_save_LIBS=$LIBS + ac_cv_search_opendir=no + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + + /* Override any gcc2 internal prototype to avoid an error. */ + #ifdef __cplusplus + extern "C" + #endif + /* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ + char opendir (); + int + main () + { + opendir (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_search_opendir="none required" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + fi + rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test "$ac_cv_search_opendir" = no; then + for ac_lib in x; do + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + + /* Override any gcc2 internal prototype to avoid an error. */ + #ifdef __cplusplus + extern "C" + #endif + /* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ + char opendir (); + int + main () + { + opendir (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_search_opendir="-l$ac_lib" + break + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + fi + rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + done + fi + LIBS=$ac_func_search_save_LIBS + fi + echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5 + echo "${ECHO_T}$ac_cv_search_opendir" >&6 + if test "$ac_cv_search_opendir" != no; then + test "$ac_cv_search_opendir" = "none required" || LIBS="$ac_cv_search_opendir $LIBS" + + fi + + fi + + echo "$as_me:$LINENO: checking for ANSI C header files" >&5 + echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 + if test "${ac_cv_header_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include + #include + #include + #include + + int + main () + { + + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_header_stdc=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_header_stdc=no + fi + rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + + if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include + + _ACEOF + if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then + : + else + ac_cv_header_stdc=no + fi + rm -f conftest* + + fi + + if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include + + _ACEOF + if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then + : + else + ac_cv_header_stdc=no + fi + rm -f conftest* + + fi + + if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then + : + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include + #if ((' ' & 0x0FF) == 0x020) + # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') + # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) + #else + # define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) + # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) + #endif + + #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) + int + main () + { + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + exit(2); + exit (0); + } + _ACEOF + rm -f conftest$ac_exeext + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : + else + echo "$as_me: program exited with status $ac_status" >&5 + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ( exit $ac_status ) + ac_cv_header_stdc=no + fi + rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi + fi + fi + echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 + echo "${ECHO_T}$ac_cv_header_stdc" >&6 + if test $ac_cv_header_stdc = yes; then + + cat >>confdefs.h <<\_ACEOF + #define STDC_HEADERS 1 + _ACEOF + + fi + + + + + + for ac_header in fcntl.h stdlib.h string.h unistd.h + do + as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` + if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo "$as_me:$LINENO: checking for $ac_header" >&5 + echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 + if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi + echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 + echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 + else + # Is the header compilable? + echo "$as_me:$LINENO: checking $ac_header usability" >&5 + echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default + #include <$ac_header> + _ACEOF + rm -f conftest.$ac_objext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_compiler=no + fi + rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 + echo "${ECHO_T}$ac_header_compiler" >&6 + + # Is the header present? + echo "$as_me:$LINENO: checking $ac_header presence" >&5 + echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include <$ac_header> + _ACEOF + if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi + else + ac_cpp_err=yes + fi + if test -z "$ac_cpp_err"; then + ac_header_preproc=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no + fi + rm -f conftest.err conftest.$ac_ext + echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 + echo "${ECHO_T}$ac_header_preproc" >&6 + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 + echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 + echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 + echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 + echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 + echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 + echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 + echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX + ## ------------------------------------------ ## + ## Report this to the AC_PACKAGE_NAME lists. ## + ## ------------------------------------------ ## + _ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; + esac + echo "$as_me:$LINENO: checking for $ac_header" >&5 + echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 + if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + eval "$as_ac_Header=\$ac_header_preproc" + fi + echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 + echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 + + fi + if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 + _ACEOF + + fi + + done + + + # Checks for typedefs, structures, and compiler characteristics. + echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 + echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6 + if test "${ac_cv_c_const+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + + int + main () + { + /* FIXME: Include the comments suggested by Paul. */ + #ifndef __cplusplus + /* Ultrix mips cc rejects this. */ + typedef int charset[2]; + const charset x; + /* SunOS 4.1.1 cc rejects this. */ + char const *const *ccp; + char **p; + /* NEC SVR4.0.2 mips cc rejects this. */ + struct point {int x, y;}; + static struct point const zero = {0,0}; + /* AIX XL C 1.02.0.0 rejects this. + It does not let you subtract one const X* pointer from another in + an arm of an if-expression whose if-part is not a constant + expression */ + const char *g = "string"; + ccp = &g + (g ? g-g : 0); + /* HPUX 7.0 cc rejects these. */ + ++ccp; + p = (char**) ccp; + ccp = (char const *const *) p; + { /* SCO 3.2v4 cc rejects this. */ + char *t; + char const *s = 0 ? (char *) 0 : (char const *) 0; + + *t++ = 0; + } + { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ + int x[] = {25, 17}; + const int *foo = &x[0]; + ++foo; + } + { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ + typedef const int *iptr; + iptr p = 0; + ++p; + } + { /* AIX XL C 1.02.0.0 rejects this saying + "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ + struct s { int j; const int *ap[3]; }; + struct s *b; b->j = 5; + } + { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ + const int foo = 10; + } + #endif + + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_c_const=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_c_const=no + fi + rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + fi + echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 + echo "${ECHO_T}$ac_cv_c_const" >&6 + if test $ac_cv_c_const = no; then + + cat >>confdefs.h <<\_ACEOF + #define const + _ACEOF + + fi + + echo "$as_me:$LINENO: checking for pid_t" >&5 + echo $ECHO_N "checking for pid_t... $ECHO_C" >&6 + if test "${ac_cv_type_pid_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default + int + main () + { + if ((pid_t *) 0) + return 0; + if (sizeof (pid_t)) + return 0; + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_type_pid_t=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_type_pid_t=no + fi + rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + fi + echo "$as_me:$LINENO: result: $ac_cv_type_pid_t" >&5 + echo "${ECHO_T}$ac_cv_type_pid_t" >&6 + if test $ac_cv_type_pid_t = yes; then + : + else + + cat >>confdefs.h <<_ACEOF + #define pid_t int + _ACEOF + + fi + + + # Checks for library functions. + + for ac_func in vprintf + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` + echo "$as_me:$LINENO: checking for $ac_func" >&5 + echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 + if eval "test \"\${$as_ac_var+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + /* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ + #define $ac_func innocuous_$ac_func + + /* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + + #ifdef __STDC__ + # include + #else + # include + #endif + + #undef $ac_func + + /* Override any gcc2 internal prototype to avoid an error. */ + #ifdef __cplusplus + extern "C" + { + #endif + /* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ + char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ + #if defined (__stub_$ac_func) || defined (__stub___$ac_func) + choke me + #else + char (*f) () = $ac_func; + #endif + #ifdef __cplusplus + } + #endif + + int + main () + { + return f != $ac_func; + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_var=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_var=no" + fi + rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + fi + echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 + echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 + if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 + _ACEOF + + echo "$as_me:$LINENO: checking for _doprnt" >&5 + echo $ECHO_N "checking for _doprnt... $ECHO_C" >&6 + if test "${ac_cv_func__doprnt+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + /* Define _doprnt to an innocuous variant, in case declares _doprnt. + For example, HP-UX 11i declares gettimeofday. */ + #define _doprnt innocuous__doprnt + + /* System header to define __stub macros and hopefully few prototypes, + which can conflict with char _doprnt (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + + #ifdef __STDC__ + # include + #else + # include + #endif + + #undef _doprnt + + /* Override any gcc2 internal prototype to avoid an error. */ + #ifdef __cplusplus + extern "C" + { + #endif + /* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ + char _doprnt (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ + #if defined (__stub__doprnt) || defined (__stub____doprnt) + choke me + #else + char (*f) () = _doprnt; + #endif + #ifdef __cplusplus + } + #endif + + int + main () + { + return f != _doprnt; + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func__doprnt=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_func__doprnt=no + fi + rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + fi + echo "$as_me:$LINENO: result: $ac_cv_func__doprnt" >&5 + echo "${ECHO_T}$ac_cv_func__doprnt" >&6 + if test $ac_cv_func__doprnt = yes; then + + cat >>confdefs.h <<\_ACEOF + #define HAVE_DOPRNT 1 + _ACEOF + + fi + + fi + done + + + + + + + + + + + + + + for ac_func in geteuid getuid link memmove memset mkstemp strchr strrchr strtol getopt getopt_long + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` + echo "$as_me:$LINENO: checking for $ac_func" >&5 + echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 + if eval "test \"\${$as_ac_var+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + /* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ + #define $ac_func innocuous_$ac_func + + /* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + + #ifdef __STDC__ + # include + #else + # include + #endif + + #undef $ac_func + + /* Override any gcc2 internal prototype to avoid an error. */ + #ifdef __cplusplus + extern "C" + { + #endif + /* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ + char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ + #if defined (__stub_$ac_func) || defined (__stub___$ac_func) + choke me + #else + char (*f) () = $ac_func; + #endif + #ifdef __cplusplus + } + #endif + + int + main () + { + return f != $ac_func; + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_var=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_var=no" + fi + rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + fi + echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 + echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 + if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 + _ACEOF + + fi + done + + + # + # Checks for FreeType + # + + + # Check whether --with-freetype-config or --without-freetype-config was given. + if test "${with_freetype_config+set}" = set; then + withval="$with_freetype_config" + freetype_config=$withval + else + freetype_config=yes + fi; + + if test "$freetype_config" = "yes"; then + # Extract the first word of "freetype-config", so it can be a program name with args. + set dummy freetype-config; ac_word=$2 + echo "$as_me:$LINENO: checking for $ac_word" >&5 + echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 + if test "${ac_cv_path_ft_config+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + case $ft_config in + [\\/]* | ?:[\\/]*) + ac_cv_path_ft_config="$ft_config" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_ft_config="$as_dir/$ac_word$ac_exec_ext" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done + + test -z "$ac_cv_path_ft_config" && ac_cv_path_ft_config="no" + ;; + esac + fi + ft_config=$ac_cv_path_ft_config + + if test -n "$ft_config"; then + echo "$as_me:$LINENO: result: $ft_config" >&5 + echo "${ECHO_T}$ft_config" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6 + fi + + if test "$ft_config" = "no"; then + { { echo "$as_me:$LINENO: error: You must have freetype installed; see http://www.freetype.org/" >&5 + echo "$as_me: error: You must have freetype installed; see http://www.freetype.org/" >&2;} + { (exit 1); exit 1; }; } + fi + else + ft_config="$freetype_config" + fi + + FREETYPE_CFLAGS="`$ft_config --cflags`" + FREETYPE_LIBS="`$ft_config --libs`" + + + + + # + # Check to see whether we have FT_Get_First_Char(), new in 2.0.9 + # + + fontconfig_save_libs=$LIBS + LIBS="$LIBS $FREETYPE_LIBS" + + for ac_func in FT_Get_First_Char + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` + echo "$as_me:$LINENO: checking for $ac_func" >&5 + echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 + if eval "test \"\${$as_ac_var+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + /* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ + #define $ac_func innocuous_$ac_func + + /* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + + #ifdef __STDC__ + # include + #else + # include + #endif + + #undef $ac_func + + /* Override any gcc2 internal prototype to avoid an error. */ + #ifdef __cplusplus + extern "C" + { + #endif + /* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ + char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ + #if defined (__stub_$ac_func) || defined (__stub___$ac_func) + choke me + #else + char (*f) () = $ac_func; + #endif + #ifdef __cplusplus + } + #endif + + int + main () + { + return f != $ac_func; + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_var=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_var=no" + fi + rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + fi + echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 + echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 + if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 + _ACEOF + + fi + done + + LIBS=$fontconfig_save_libs + + # + # Check expat configuration + # + + + # Check whether --with-expat or --without-expat was given. + if test "${with_expat+set}" = set; then + withval="$with_expat" + expat=$withval + else + expat=yes + fi; + + # Check whether --with-expat-includes or --without-expat-includes was given. + if test "${with_expat_includes+set}" = set; then + withval="$with_expat_includes" + expat_includes=$withval + else + expat_includes=yes + fi; + + # Check whether --with-expat-lib or --without-expat-lib was given. + if test "${with_expat_lib+set}" = set; then + withval="$with_expat_lib" + expat_lib=$withval + else + expat_lib=yes + fi; + + case "$expat" in + no) + ;; + *) + case "$expat_includes" in + yes|no) + EXPAT_CFLAGS="" + ;; + *) + EXPAT_CFLAGS="-I$expat_includes" + ;; + esac + case "$expat_lib" in + yes) + case "$expat" in + yes) + EXPAT_LIBS="-lexpat" + ;; + *) + EXPAT_LIBS="-L$expat/lib -lexpat" + ;; + esac + ;; + no) + ;; + *) + EXPAT_LIBS="-L$expat_lib -lexpat" + ;; + esac + + expatsaved_CPPFLAGS="$CPPFLAGS" + CPPFLAGS="$CPPFLAGS $EXPAT_CFLAGS" + expatsaved_LIBS="$LIBS" + LIBS="$LIBS $EXPAT_LIBS" + + if test "${ac_cv_header_expat_h+set}" = set; then + echo "$as_me:$LINENO: checking for expat.h" >&5 + echo $ECHO_N "checking for expat.h... $ECHO_C" >&6 + if test "${ac_cv_header_expat_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi + echo "$as_me:$LINENO: result: $ac_cv_header_expat_h" >&5 + echo "${ECHO_T}$ac_cv_header_expat_h" >&6 + else + # Is the header compilable? + echo "$as_me:$LINENO: checking expat.h usability" >&5 + echo $ECHO_N "checking expat.h usability... $ECHO_C" >&6 + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default + #include + _ACEOF + rm -f conftest.$ac_objext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_compiler=no + fi + rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 + echo "${ECHO_T}$ac_header_compiler" >&6 + + # Is the header present? + echo "$as_me:$LINENO: checking expat.h presence" >&5 + echo $ECHO_N "checking expat.h presence... $ECHO_C" >&6 + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include + _ACEOF + if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi + else + ac_cpp_err=yes + fi + if test -z "$ac_cpp_err"; then + ac_header_preproc=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no + fi + rm -f conftest.err conftest.$ac_ext + echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 + echo "${ECHO_T}$ac_header_preproc" >&6 + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: expat.h: accepted by the compiler, rejected by the preprocessor!" >&5 + echo "$as_me: WARNING: expat.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: expat.h: proceeding with the compiler's result" >&5 + echo "$as_me: WARNING: expat.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: expat.h: present but cannot be compiled" >&5 + echo "$as_me: WARNING: expat.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: expat.h: check for missing prerequisite headers?" >&5 + echo "$as_me: WARNING: expat.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: expat.h: see the Autoconf documentation" >&5 + echo "$as_me: WARNING: expat.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: expat.h: section \"Present But Cannot Be Compiled\"" >&5 + echo "$as_me: WARNING: expat.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: expat.h: proceeding with the preprocessor's result" >&5 + echo "$as_me: WARNING: expat.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: expat.h: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: expat.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX + ## ------------------------------------------ ## + ## Report this to the AC_PACKAGE_NAME lists. ## + ## ------------------------------------------ ## + _ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; + esac + echo "$as_me:$LINENO: checking for expat.h" >&5 + echo $ECHO_N "checking for expat.h... $ECHO_C" >&6 + if test "${ac_cv_header_expat_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_cv_header_expat_h=$ac_header_preproc + fi + echo "$as_me:$LINENO: result: $ac_cv_header_expat_h" >&5 + echo "${ECHO_T}$ac_cv_header_expat_h" >&6 + + fi + + + case "$ac_cv_header_expat_h" in + no) + if test "${ac_cv_header_xmlparse_h+set}" = set; then + echo "$as_me:$LINENO: checking for xmlparse.h" >&5 + echo $ECHO_N "checking for xmlparse.h... $ECHO_C" >&6 + if test "${ac_cv_header_xmlparse_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi + echo "$as_me:$LINENO: result: $ac_cv_header_xmlparse_h" >&5 + echo "${ECHO_T}$ac_cv_header_xmlparse_h" >&6 + else + # Is the header compilable? + echo "$as_me:$LINENO: checking xmlparse.h usability" >&5 + echo $ECHO_N "checking xmlparse.h usability... $ECHO_C" >&6 + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default + #include + _ACEOF + rm -f conftest.$ac_objext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_compiler=no + fi + rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 + echo "${ECHO_T}$ac_header_compiler" >&6 + + # Is the header present? + echo "$as_me:$LINENO: checking xmlparse.h presence" >&5 + echo $ECHO_N "checking xmlparse.h presence... $ECHO_C" >&6 + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include + _ACEOF + if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi + else + ac_cpp_err=yes + fi + if test -z "$ac_cpp_err"; then + ac_header_preproc=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no + fi + rm -f conftest.err conftest.$ac_ext + echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 + echo "${ECHO_T}$ac_header_preproc" >&6 + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: xmlparse.h: accepted by the compiler, rejected by the preprocessor!" >&5 + echo "$as_me: WARNING: xmlparse.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: xmlparse.h: proceeding with the compiler's result" >&5 + echo "$as_me: WARNING: xmlparse.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: xmlparse.h: present but cannot be compiled" >&5 + echo "$as_me: WARNING: xmlparse.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: xmlparse.h: check for missing prerequisite headers?" >&5 + echo "$as_me: WARNING: xmlparse.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: xmlparse.h: see the Autoconf documentation" >&5 + echo "$as_me: WARNING: xmlparse.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: xmlparse.h: section \"Present But Cannot Be Compiled\"" >&5 + echo "$as_me: WARNING: xmlparse.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: xmlparse.h: proceeding with the preprocessor's result" >&5 + echo "$as_me: WARNING: xmlparse.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: xmlparse.h: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: xmlparse.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX + ## ------------------------------------------ ## + ## Report this to the AC_PACKAGE_NAME lists. ## + ## ------------------------------------------ ## + _ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; + esac + echo "$as_me:$LINENO: checking for xmlparse.h" >&5 + echo $ECHO_N "checking for xmlparse.h... $ECHO_C" >&6 + if test "${ac_cv_header_xmlparse_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_cv_header_xmlparse_h=$ac_header_preproc + fi + echo "$as_me:$LINENO: result: $ac_cv_header_xmlparse_h" >&5 + echo "${ECHO_T}$ac_cv_header_xmlparse_h" >&6 + + fi + + + case "$ac_cv_header_xmlparse_h" in + no) + have_expat_header=no; + ;; + yes) + HAVE_XMLPARSE_H=1 + + + cat >>confdefs.h <<_ACEOF + #define HAVE_XMLPARSE_H $HAVE_XMLPARSE_H + _ACEOF + + have_expat_header=yes + ;; + esac + ;; + yes) + have_expat_header=yes + ;; + esac + case "$have_expat_header" in + no) + expat=no + ;; + yes) + + for ac_func in XML_ParserCreate + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` + echo "$as_me:$LINENO: checking for $ac_func" >&5 + echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 + if eval "test \"\${$as_ac_var+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + /* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ + #define $ac_func innocuous_$ac_func + + /* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + + #ifdef __STDC__ + # include + #else + # include + #endif + + #undef $ac_func + + /* Override any gcc2 internal prototype to avoid an error. */ + #ifdef __cplusplus + extern "C" + { + #endif + /* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ + char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ + #if defined (__stub_$ac_func) || defined (__stub___$ac_func) + choke me + #else + char (*f) () = $ac_func; + #endif + #ifdef __cplusplus + } + #endif + + int + main () + { + return f != $ac_func; + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_var=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_var=no" + fi + rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + fi + echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 + echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 + if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 + _ACEOF + + fi + done + + case "$ac_cv_func_XML_ParserCreate" in + no) + expat=no + ;; + yes) + HAVE_EXPAT=1 + + + cat >>confdefs.h <<_ACEOF + #define HAVE_EXPAT $HAVE_EXPAT + _ACEOF + + ;; + esac + ;; + esac + CPPFLAGS="$expatsaved_CPPFLAGS" + LIBS="$expatsaved_LIBS" + ;; + esac + + + + case "$expat" in + no) + { { echo "$as_me:$LINENO: error: cannot find expat library" >&5 + echo "$as_me: error: cannot find expat library" >&2;} + { (exit 1); exit 1; }; } + ;; + esac + + # + # Set default font directory + # + + + # Check whether --with-default-fonts or --without-default-fonts was given. + if test "${with_default_fonts+set}" = set; then + withval="$with_default_fonts" + default_fonts="$withval" + else + default_fonts=yes + fi; + + case "$default_fonts" in + yes) + FC_DEFAULT_FONTS="/usr/share/fonts" + + cat >>confdefs.h <<_ACEOF + #define FC_DEFAULT_FONTS "/usr/share/fonts" + _ACEOF + + ;; + *) + FC_DEFAULT_FONTS="$default_fonts" + + cat >>confdefs.h <<_ACEOF + #define FC_DEFAULT_FONTS "$default_fonts" + _ACEOF + + ;; + esac + + + + # + # Add more fonts if available. By default, add only the directories + # with outline fonts; those with bitmaps can be added as desired in + # local.conf or ~/.fonts.conf + # + + # Check whether --with-add-fonts or --without-add-fonts was given. + if test "${with_add_fonts+set}" = set; then + withval="$with_add_fonts" + add_fonts="$withval" + else + add_fonts=yes + fi; + + case "$add_fonts" in + yes) + FC_ADD_FONTS="" + for dir in /usr/X11R6/lib/X11 /usr/X11/lib/X11 /usr/lib/X11; do + case x"$FC_ADD_FONTS" in + x) + if test -d "$dir/fonts"; then + for sub in "$dir"/fonts/*; do + if ls "$sub" | grep -q -i '\.pf\|\.tt\|\.ot'; then + case x$FC_ADD_FONTS in + x) + FC_ADD_FONTS="$sub" + ;; + *) + FC_ADD_FONTS="$FC_ADD_FONTS,$sub" + ;; + esac + fi + done + fi + ;; + esac + done + + cat >>confdefs.h <<_ACEOF + #define FC_ADD_FONTS "$add_fonts" + _ACEOF + + ;; + no) + FC_ADD_FONTS="" + ;; + *) + FC_ADD_FONTS="$add_fonts" + + cat >>confdefs.h <<_ACEOF + #define FC_ADD_FONTS "$add_fonts" + _ACEOF + + ;; + esac + + + + FC_FONTPATH="" + + case "$FC_ADD_FONTS" in + "") + ;; + *) + FC_FONTPATH=`echo $FC_ADD_FONTS | + sed -e 's/^//' -e 's/$/<\/dir>/' -e 's/,/<\/dir> /g'` + ;; + esac + + + + FC_FONTDATE=`date` + + + + + # Check whether --with-confdir or --without-confdir was given. + if test "${with_confdir+set}" = set; then + withval="$with_confdir" + confdir="$withval" + else + confdir=yes + fi; + + # + # Set CONFDIR and FONTCONFIG_PATH + # + + case "$confdir" in + no|yes) + confdir='${sysconfdir}'/fonts + ;; + *) + ;; + esac + + CONFDIR=${confdir} + + cat >>confdefs.h <<_ACEOF + #define CONFDIR "$CONFDIR" + _ACEOF + + + + # + # Find out what language orthographies are included + # + + ORTH_FILES=`cd ${srcdir}/fc-lang && echo *.orth` + + + # + # Let people not build/install docs if they don't have docbook + # + + # Extract the first word of "docbook2html", so it can be a program name with args. + set dummy docbook2html; ac_word=$2 + echo "$as_me:$LINENO: checking for $ac_word" >&5 + echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 + if test "${ac_cv_prog_HASDOCBOOK+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$HASDOCBOOK"; then + ac_cv_prog_HASDOCBOOK="$HASDOCBOOK" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_HASDOCBOOK="yes" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done + + test -z "$ac_cv_prog_HASDOCBOOK" && ac_cv_prog_HASDOCBOOK="no" + fi + fi + HASDOCBOOK=$ac_cv_prog_HASDOCBOOK + if test -n "$HASDOCBOOK"; then + echo "$as_me:$LINENO: result: $HASDOCBOOK" >&5 + echo "${ECHO_T}$HASDOCBOOK" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6 + fi + + + # Check whether --enable-docs or --disable-docs was given. + if test "${enable_docs+set}" = set; then + enableval="$enable_docs" + + else + enable_docs=yes + fi; + + if test "x$enable_docs" = xyes; then + if test "x$HASDOCBOOK" != xyes; then + enable_docs=no + fi + fi + + + + if test "x$enable_docs" = xyes; then + ENABLE_DOCS_TRUE= + ENABLE_DOCS_FALSE='#' + else + ENABLE_DOCS_TRUE='#' + ENABLE_DOCS_FALSE= + fi + + + # + # Figure out where to install documentation + # + + + # Check whether --with-docdir or --without-docdir was given. + if test "${with_docdir+set}" = set; then + withval="$with_docdir" + confdir="$withval" + fi; + + if test "x$with_docdir" = "x" ; then + DOCDIR='${datadir}/doc/fontconfig' + else + DOCDIR=$with_docdir + fi + + + + ac_config_files="$ac_config_files Makefile fontconfig/Makefile fc-lang/Makefile src/Makefile src/fontconfig.def fc-cache/Makefile fc-list/Makefile doc/Makefile doc/version.sgml test/Makefile fontconfig.spec fontconfig.pc fonts.conf fontconfig-zip" + cat >confcache <<\_ACEOF + # This file is a shell script that caches the results of configure + # tests run on this system so they can be shared between configure + # scripts and configure runs, see configure's option --config-cache. + # It is not useful on other systems. If it contains results you don't + # want to keep, you may remove or edit it. + # + # config.status only pays attention to the cache file if you give it + # the --recheck option to rerun configure. + # + # `ac_cv_env_foo' variables (set or unset) will be overridden when + # loading this file, other *unset* `ac_cv_foo' will be assigned the + # following values. + + _ACEOF + + # The following way of writing the cache mishandles newlines in values, + # but we know of no workaround that is simple, portable, and efficient. + # So, don't put newlines in cache variables' values. + # Ultrix sh set writes to stderr and can't be redirected directly, + # and sets the high bit in the cache file unless we assign to the vars. + { + (set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; + } | + sed ' + t clear + : clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + : end' >>confcache + if diff $cache_file confcache >/dev/null 2>&1; then :; else + if test -w $cache_file; then + test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" + cat confcache >$cache_file + else + echo "not updating unwritable cache $cache_file" + fi + fi + rm -f confcache + + test "x$prefix" = xNONE && prefix=$ac_default_prefix + # Let make expand exec_prefix. + test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + + # VPATH may cause trouble with some makes, so we remove $(srcdir), + # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and + # trailing colons and then remove the whole line if VPATH becomes empty + # (actually we leave an empty line to preserve line numbers). + if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=/{ + s/:*\$(srcdir):*/:/; + s/:*\${srcdir}:*/:/; + s/:*@srcdir@:*/:/; + s/^\([^=]*=[ ]*\):*/\1/; + s/:*$//; + s/^[^=]*=[ ]*$//; + }' + fi + + DEFS=-DHAVE_CONFIG_H + + ac_libobjs= + ac_ltlibobjs= + for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_i=`echo "$ac_i" | + sed 's/\$U\././;s/\.o$//;s/\.obj$//'` + # 2. Add them. + ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' + done + LIBOBJS=$ac_libobjs + + LTLIBOBJS=$ac_ltlibobjs + + + if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. + Usually this means the macro was only invoked conditionally." >&5 + echo "$as_me: error: conditional \"AMDEP\" was never defined. + Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } + fi + if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. + Usually this means the macro was only invoked conditionally." >&5 + echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. + Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } + fi + if test -z "${OS_WIN32_TRUE}" && test -z "${OS_WIN32_FALSE}"; then + { { echo "$as_me:$LINENO: error: conditional \"OS_WIN32\" was never defined. + Usually this means the macro was only invoked conditionally." >&5 + echo "$as_me: error: conditional \"OS_WIN32\" was never defined. + Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } + fi + if test -z "${MS_LIB_AVAILABLE_TRUE}" && test -z "${MS_LIB_AVAILABLE_FALSE}"; then + { { echo "$as_me:$LINENO: error: conditional \"MS_LIB_AVAILABLE\" was never defined. + Usually this means the macro was only invoked conditionally." >&5 + echo "$as_me: error: conditional \"MS_LIB_AVAILABLE\" was never defined. + Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } + fi + if test -z "${ENABLE_DOCS_TRUE}" && test -z "${ENABLE_DOCS_FALSE}"; then + { { echo "$as_me:$LINENO: error: conditional \"ENABLE_DOCS\" was never defined. + Usually this means the macro was only invoked conditionally." >&5 + echo "$as_me: error: conditional \"ENABLE_DOCS\" was never defined. + Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } + fi + + : ${CONFIG_STATUS=./config.status} + ac_clean_files_save=$ac_clean_files + ac_clean_files="$ac_clean_files $CONFIG_STATUS" + { echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 + echo "$as_me: creating $CONFIG_STATUS" >&6;} + cat >$CONFIG_STATUS <<_ACEOF + #! $SHELL + # Generated by $as_me. + # Run this file to recreate the current configuration. + # Compiler output produced by configure, useful for debugging + # configure, is in config.log if it exists. + + debug=false + ac_cs_recheck=false + ac_cs_silent=false + SHELL=\${CONFIG_SHELL-$SHELL} + _ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF + ## --------------------- ## + ## M4sh Initialization. ## + ## --------------------- ## + + # Be Bourne compatible + if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix + fi + DUALCASE=1; export DUALCASE # for MKS sh + + # Support unset when possible. + if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset + else + as_unset=false + fi + + + # Work around bugs in pre-3.0 UWIN ksh. + $as_unset ENV MAIL MAILPATH + PS1='$ ' + PS2='> ' + PS4='+ ' + + # NLS nuisances. + for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME + do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi + done + + # Required to use basename. + if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr + else + as_expr=false + fi + + if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename + else + as_basename=false + fi + + + # Name of the executable. + as_me=`$as_basename "$0" || + $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || + echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + + # PATH needs CR, and LINENO needs CR and PATH. + # Avoid depending upon Character Ranges. + as_cr_letters='abcdefghijklmnopqrstuvwxyz' + as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' + as_cr_Letters=$as_cr_letters$as_cr_LETTERS + as_cr_digits='0123456789' + as_cr_alnum=$as_cr_Letters$as_cr_digits + + # The user is always right. + if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh + fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 + echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done + done + ;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 + echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit + } + + + case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' + ' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; + esac + + if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr + else + as_expr=false + fi + + rm -f conf$$ conf$$.exe conf$$.file + echo >conf$$.file + if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi + rm -f conf$$ conf$$.exe conf$$.file + + if mkdir -p . 2>/dev/null; then + as_mkdir_p=: + else + test -d ./-p && rmdir ./-p + as_mkdir_p=false + fi + + as_executable_p="test -f" + + # Sed expression to map a string onto a valid CPP name. + as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + + # Sed expression to map a string onto a valid variable name. + as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + + # IFS + # We need space, tab and new line, in precisely that order. + as_nl=' + ' + IFS=" $as_nl" + + # CDPATH. + $as_unset CDPATH + + exec 6>&1 + + # Open the log real soon, to keep \$[0] and so on meaningful, and to + # report actual input values of CONFIG_FILES etc. instead of their + # values after options handling. Logging --version etc. is OK. + exec 5>>config.log + { + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX + ## Running $as_me. ## + _ASBOX + } >&5 + cat >&5 <<_CSEOF + + This file was extended by $as_me, which was + generated by GNU Autoconf 2.59. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + + _CSEOF + echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 + echo >&5 + _ACEOF + + # Files that config.status was made for. + if test -n "$ac_config_files"; then + echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS + fi + + if test -n "$ac_config_headers"; then + echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS + fi + + if test -n "$ac_config_links"; then + echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS + fi + + if test -n "$ac_config_commands"; then + echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS + fi + + cat >>$CONFIG_STATUS <<\_ACEOF + + ac_cs_usage="\ + \`$as_me' instantiates files from templates according to the + current configuration. + + Usage: $0 [OPTIONS] [FILE]... + + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + + Configuration files: + $config_files + + Configuration headers: + $config_headers + + Configuration commands: + $config_commands + + Report bugs to ." + _ACEOF + + cat >>$CONFIG_STATUS <<_ACEOF + ac_cs_version="\\ + config.status + configured by $0, generated by GNU Autoconf 2.59, + with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" + + Copyright (C) 2003 Free Software Foundation, Inc. + This config.status script is free software; the Free Software Foundation + gives unlimited permission to copy, distribute and modify it." + srcdir=$srcdir + INSTALL="$INSTALL" + _ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF + # If no file are specified by the user, then we need to provide default + # value. By we need to know if files were specified by the user. + ac_need_defaults=: + while test $# != 0 + do + case $1 in + --*=*) + ac_option=`expr "x$1" : 'x\([^=]*\)='` + ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` + ac_shift=: + ;; + -*) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + *) # This is not an option, so the user has probably given explicit + # arguments. + ac_option=$1 + ac_need_defaults=false;; + esac + + case $ac_option in + # Handling of the options. + _ACEOF + cat >>$CONFIG_STATUS <<\_ACEOF + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --vers* | -V ) + echo "$ac_cs_version"; exit 0 ;; + --he | --h) + # Conflict between --help and --header + { { echo "$as_me:$LINENO: error: ambiguous option: $1 + Try \`$0 --help' for more information." >&5 + echo "$as_me: error: ambiguous option: $1 + Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; };; + --help | --hel | -h ) + echo "$ac_cs_usage"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + CONFIG_FILES="$CONFIG_FILES $ac_optarg" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" + ac_need_defaults=false;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 + Try \`$0 --help' for more information." >&5 + echo "$as_me: error: unrecognized option: $1 + Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; } ;; + + *) ac_config_targets="$ac_config_targets $1" ;; + + esac + shift + done + + ac_configure_extra_args= + + if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" + fi + + _ACEOF + cat >>$CONFIG_STATUS <<_ACEOF + if \$ac_cs_recheck; then + echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 + exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + fi + + _ACEOF + + cat >>$CONFIG_STATUS <<_ACEOF + # + # INIT-COMMANDS section. + # + + AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" + + _ACEOF + + + + cat >>$CONFIG_STATUS <<\_ACEOF + for ac_config_target in $ac_config_targets + do + case "$ac_config_target" in + # Handling of arguments. + "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "fontconfig/Makefile" ) CONFIG_FILES="$CONFIG_FILES fontconfig/Makefile" ;; + "fc-lang/Makefile" ) CONFIG_FILES="$CONFIG_FILES fc-lang/Makefile" ;; + "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; + "src/fontconfig.def" ) CONFIG_FILES="$CONFIG_FILES src/fontconfig.def" ;; + "fc-cache/Makefile" ) CONFIG_FILES="$CONFIG_FILES fc-cache/Makefile" ;; + "fc-list/Makefile" ) CONFIG_FILES="$CONFIG_FILES fc-list/Makefile" ;; + "doc/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; + "doc/version.sgml" ) CONFIG_FILES="$CONFIG_FILES doc/version.sgml" ;; + "test/Makefile" ) CONFIG_FILES="$CONFIG_FILES test/Makefile" ;; + "fontconfig.spec" ) CONFIG_FILES="$CONFIG_FILES fontconfig.spec" ;; + "fontconfig.pc" ) CONFIG_FILES="$CONFIG_FILES fontconfig.pc" ;; + "fonts.conf" ) CONFIG_FILES="$CONFIG_FILES fonts.conf" ;; + "fontconfig-zip" ) CONFIG_FILES="$CONFIG_FILES fontconfig-zip" ;; + "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 + echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac + done + + # If the user did not use the arguments to specify the items to instantiate, + # then the envvar interface is used. Set only those that are not. + # We use the long form for the default assignment because of an extremely + # bizarre bug on SunOS 4.1.3. + if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands + fi + + # Have a temporary directory for convenience. Make it in the build tree + # simply because there is no reason to put it here, and in addition, + # creating and moving files from /tmp can sometimes cause problems. + # Create a temporary directory, and hook for its removal unless debugging. + $debug || + { + trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 + } + + # Create a (secure) tmp directory for tmp files. + + { + tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" + } || + { + tmp=./confstat$$-$RANDOM + (umask 077 && mkdir $tmp) + } || + { + echo "$me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } + } + + _ACEOF + + cat >>$CONFIG_STATUS <<_ACEOF + + # + # CONFIG_FILES section. + # + + # No need to generate the scripts if there are no CONFIG_FILES. + # This happens for instance when ./config.status config.h + if test -n "\$CONFIG_FILES"; then + # Protect against being on the right side of a sed subst in config.status. + sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; + s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF + s,@SHELL@,$SHELL,;t t + s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t + s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t + s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t + s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t + s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t + s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t + s,@exec_prefix@,$exec_prefix,;t t + s,@prefix@,$prefix,;t t + s,@program_transform_name@,$program_transform_name,;t t + s,@bindir@,$bindir,;t t + s,@sbindir@,$sbindir,;t t + s,@libexecdir@,$libexecdir,;t t + s,@datadir@,$datadir,;t t + s,@sysconfdir@,$sysconfdir,;t t + s,@sharedstatedir@,$sharedstatedir,;t t + s,@localstatedir@,$localstatedir,;t t + s,@libdir@,$libdir,;t t + s,@includedir@,$includedir,;t t + s,@oldincludedir@,$oldincludedir,;t t + s,@infodir@,$infodir,;t t + s,@mandir@,$mandir,;t t + s,@build_alias@,$build_alias,;t t + s,@host_alias@,$host_alias,;t t + s,@target_alias@,$target_alias,;t t + s,@DEFS@,$DEFS,;t t + s,@ECHO_C@,$ECHO_C,;t t + s,@ECHO_N@,$ECHO_N,;t t + s,@ECHO_T@,$ECHO_T,;t t + s,@LIBS@,$LIBS,;t t + s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t + s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t + s,@INSTALL_DATA@,$INSTALL_DATA,;t t + s,@CYGPATH_W@,$CYGPATH_W,;t t + s,@PACKAGE@,$PACKAGE,;t t + s,@VERSION@,$VERSION,;t t + s,@ACLOCAL@,$ACLOCAL,;t t + s,@AUTOCONF@,$AUTOCONF,;t t + s,@AUTOMAKE@,$AUTOMAKE,;t t + s,@AUTOHEADER@,$AUTOHEADER,;t t + s,@MAKEINFO@,$MAKEINFO,;t t + s,@install_sh@,$install_sh,;t t + s,@STRIP@,$STRIP,;t t + s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t + s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t + s,@mkdir_p@,$mkdir_p,;t t + s,@AWK@,$AWK,;t t + s,@SET_MAKE@,$SET_MAKE,;t t + s,@am__leading_dot@,$am__leading_dot,;t t + s,@AMTAR@,$AMTAR,;t t + s,@am__tar@,$am__tar,;t t + s,@am__untar@,$am__untar,;t t + s,@LT_CURRENT@,$LT_CURRENT,;t t + s,@LT_REVISION@,$LT_REVISION,;t t + s,@LT_VERSION_INFO@,$LT_VERSION_INFO,;t t + s,@LT_CURRENT_MINUS_AGE@,$LT_CURRENT_MINUS_AGE,;t t + s,@CC@,$CC,;t t + s,@CFLAGS@,$CFLAGS,;t t + s,@LDFLAGS@,$LDFLAGS,;t t + s,@CPPFLAGS@,$CPPFLAGS,;t t + s,@ac_ct_CC@,$ac_ct_CC,;t t + s,@EXEEXT@,$EXEEXT,;t t + s,@OBJEXT@,$OBJEXT,;t t + s,@DEPDIR@,$DEPDIR,;t t + s,@am__include@,$am__include,;t t + s,@am__quote@,$am__quote,;t t + s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t + s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t + s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t + s,@CCDEPMODE@,$CCDEPMODE,;t t + s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t + s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t + s,@LN_S@,$LN_S,;t t + s,@build@,$build,;t t + s,@build_cpu@,$build_cpu,;t t + s,@build_vendor@,$build_vendor,;t t + s,@build_os@,$build_os,;t t + s,@host@,$host,;t t + s,@host_cpu@,$host_cpu,;t t + s,@host_vendor@,$host_vendor,;t t + s,@host_os@,$host_os,;t t + s,@ECHO@,$ECHO,;t t + s,@RANLIB@,$RANLIB,;t t + s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t + s,@CPP@,$CPP,;t t + s,@EGREP@,$EGREP,;t t + s,@LIBTOOL@,$LIBTOOL,;t t + s,@OS_WIN32_TRUE@,$OS_WIN32_TRUE,;t t + s,@OS_WIN32_FALSE@,$OS_WIN32_FALSE,;t t + s,@ms_librarian@,$ms_librarian,;t t + s,@MS_LIB_AVAILABLE_TRUE@,$MS_LIB_AVAILABLE_TRUE,;t t + s,@MS_LIB_AVAILABLE_FALSE@,$MS_LIB_AVAILABLE_FALSE,;t t + s,@ft_config@,$ft_config,;t t + s,@FREETYPE_LIBS@,$FREETYPE_LIBS,;t t + s,@FREETYPE_CFLAGS@,$FREETYPE_CFLAGS,;t t + s,@HAVE_XMLPARSE_H@,$HAVE_XMLPARSE_H,;t t + s,@HAVE_EXPAT@,$HAVE_EXPAT,;t t + s,@EXPAT_LIBS@,$EXPAT_LIBS,;t t + s,@EXPAT_CFLAGS@,$EXPAT_CFLAGS,;t t + s,@FC_DEFAULT_FONTS@,$FC_DEFAULT_FONTS,;t t + s,@FC_ADD_FONTS@,$FC_ADD_FONTS,;t t + s,@FC_FONTPATH@,$FC_FONTPATH,;t t + s,@FC_FONTDATE@,$FC_FONTDATE,;t t + s,@confdir@,$confdir,;t t + s,@CONFDIR@,$CONFDIR,;t t + s,@ORTH_FILES@,$ORTH_FILES,;t t + s,@HASDOCBOOK@,$HASDOCBOOK,;t t + s,@ENABLE_DOCS_TRUE@,$ENABLE_DOCS_TRUE,;t t + s,@ENABLE_DOCS_FALSE@,$ENABLE_DOCS_FALSE,;t t + s,@DOCDIR@,$DOCDIR,;t t + s,@LIBOBJS@,$LIBOBJS,;t t + s,@LTLIBOBJS@,$LTLIBOBJS,;t t + CEOF + + _ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF + # Split the substitutions into bite-sized pieces for seds with + # small command number limits, like on Digital OSF/1 and HP-UX. + ac_max_sed_lines=48 + ac_sed_frag=1 # Number of current file. + ac_beg=1 # First line for current file. + ac_end=$ac_max_sed_lines # Line after last line for current file. + ac_more_lines=: + ac_sed_cmds= + while $ac_more_lines; do + if test $ac_beg -gt 1; then + sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag + else + sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag + fi + if test ! -s $tmp/subs.frag; then + ac_more_lines=false + else + # The purpose of the label and of the branching condition is to + # speed up the sed processing (if there are no `@' at all, there + # is no need to browse any of the substitutions). + # These are the two extra sed commands mentioned above. + (echo ':t + /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed + if test -z "$ac_sed_cmds"; then + ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" + else + ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" + fi + ac_sed_frag=`expr $ac_sed_frag + 1` + ac_beg=$ac_end + ac_end=`expr $ac_end + $ac_max_sed_lines` + fi + done + if test -z "$ac_sed_cmds"; then + ac_sed_cmds=cat + fi + fi # test -n "$CONFIG_FILES" + + _ACEOF + cat >>$CONFIG_STATUS <<\_ACEOF + for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case $ac_file in + - | *:- | *:-:* ) # input from stdin + cat >$tmp/stdin + ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + * ) ac_file_in=$ac_file.in ;; + esac + + # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. + ac_dir=`(dirname "$ac_file") 2>/dev/null || + $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || + echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || + $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || + echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 + echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } + + ac_builddir=. + + if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` + else + ac_dir_suffix= ac_top_builddir= + fi + + case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; + esac + + # Do not use `cd foo && pwd` to compute absolute paths, because + # the directories may not exist. + case `pwd` in + .) ac_abs_builddir="$ac_dir";; + *) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; + esac + case $ac_abs_builddir in + .) ac_abs_top_builddir=${ac_top_builddir}.;; + *) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; + esac + case $ac_abs_builddir in + .) ac_abs_srcdir=$ac_srcdir;; + *) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; + esac + case $ac_abs_builddir in + .) ac_abs_top_srcdir=$ac_top_srcdir;; + *) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; + esac + + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_builddir$INSTALL ;; + esac + + if test x"$ac_file" != x-; then + { echo "$as_me:$LINENO: creating $ac_file" >&5 + echo "$as_me: creating $ac_file" >&6;} + rm -f "$ac_file" + fi + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + if test x"$ac_file" = x-; then + configure_input= + else + configure_input="$ac_file. " + fi + configure_input=$configure_input"Generated from `echo $ac_file_in | + sed 's,.*/,,'` by configure." + + # First look for the input files in the build tree, otherwise in the + # src tree. + ac_file_inputs=`IFS=: + for f in $ac_file_in; do + case $f in + -) echo $tmp/stdin ;; + [\\/$]*) + # Absolute (can't be DOS-style, as IFS=:) + test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 + echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + echo "$f";; + *) # Relative + if test -f "$f"; then + # Build tree + echo "$f" + elif test -f "$srcdir/$f"; then + # Source tree + echo "$srcdir/$f" + else + # /dev/null tree + { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 + echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + fi;; + esac + done` || { (exit 1); exit 1; } + _ACEOF + cat >>$CONFIG_STATUS <<_ACEOF + sed "$ac_vpsub + $extrasub + _ACEOF + cat >>$CONFIG_STATUS <<\_ACEOF + :t + /@[a-zA-Z_][a-zA-Z_0-9]*@/!b + s,@configure_input@,$configure_input,;t t + s,@srcdir@,$ac_srcdir,;t t + s,@abs_srcdir@,$ac_abs_srcdir,;t t + s,@top_srcdir@,$ac_top_srcdir,;t t + s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t + s,@builddir@,$ac_builddir,;t t + s,@abs_builddir@,$ac_abs_builddir,;t t + s,@top_builddir@,$ac_top_builddir,;t t + s,@abs_top_builddir@,$ac_abs_top_builddir,;t t + s,@INSTALL@,$ac_INSTALL,;t t + " $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out + rm -f $tmp/stdin + if test x"$ac_file" != x-; then + mv $tmp/out $ac_file + else + cat $tmp/out + rm -f $tmp/out + fi + + done + _ACEOF + cat >>$CONFIG_STATUS <<\_ACEOF + + # + # CONFIG_HEADER section. + # + + # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where + # NAME is the cpp macro being defined and VALUE is the value it is being given. + # + # ac_d sets the value in "#define NAME VALUE" lines. + ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' + ac_dB='[ ].*$,\1#\2' + ac_dC=' ' + ac_dD=',;t' + # ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". + ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' + ac_uB='$,\1#\2define\3' + ac_uC=' ' + ac_uD=',;t' + + for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case $ac_file in + - | *:- | *:-:* ) # input from stdin + cat >$tmp/stdin + ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + * ) ac_file_in=$ac_file.in ;; + esac + + test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 + echo "$as_me: creating $ac_file" >&6;} + + # First look for the input files in the build tree, otherwise in the + # src tree. + ac_file_inputs=`IFS=: + for f in $ac_file_in; do + case $f in + -) echo $tmp/stdin ;; + [\\/$]*) + # Absolute (can't be DOS-style, as IFS=:) + test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 + echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + # Do quote $f, to prevent DOS paths from being IFS'd. + echo "$f";; + *) # Relative + if test -f "$f"; then + # Build tree + echo "$f" + elif test -f "$srcdir/$f"; then + # Source tree + echo "$srcdir/$f" + else + # /dev/null tree + { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 + echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + fi;; + esac + done` || { (exit 1); exit 1; } + # Remove the trailing spaces. + sed 's/[ ]*$//' $ac_file_inputs >$tmp/in + + _ACEOF + + # Transform confdefs.h into two sed scripts, `conftest.defines' and + # `conftest.undefs', that substitutes the proper values into + # config.h.in to produce config.h. The first handles `#define' + # templates, and the second `#undef' templates. + # And first: Protect against being on the right side of a sed subst in + # config.status. Protect against being in an unquoted here document + # in config.status. + rm -f conftest.defines conftest.undefs + # Using a here document instead of a string reduces the quoting nightmare. + # Putting comments in sed scripts is not portable. + # + # `end' is used to avoid that the second main sed command (meant for + # 0-ary CPP macros) applies to n-ary macro definitions. + # See the Autoconf documentation for `clear'. + cat >confdef2sed.sed <<\_ACEOF + s/[\\&,]/\\&/g + s,[\\$`],\\&,g + t clear + : clear + s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp + t end + s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp + : end + _ACEOF + # If some macros were called several times there might be several times + # the same #defines, which is useless. Nevertheless, we may not want to + # sort them, since we want the *last* AC-DEFINE to be honored. + uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines + sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs + rm -f confdef2sed.sed + + # This sed command replaces #undef with comments. This is necessary, for + # example, in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. + cat >>conftest.undefs <<\_ACEOF + s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, + _ACEOF + + # Break up conftest.defines because some shells have a limit on the size + # of here documents, and old seds have small limits too (100 cmds). + echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS + echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS + echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS + echo ' :' >>$CONFIG_STATUS + rm -f conftest.tail + while grep . conftest.defines >/dev/null + do + # Write a limited-size here document to $tmp/defines.sed. + echo ' cat >$tmp/defines.sed <>$CONFIG_STATUS + # Speed up: don't consider the non `#define' lines. + echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS + # Work around the forget-to-reset-the-flag bug. + echo 't clr' >>$CONFIG_STATUS + echo ': clr' >>$CONFIG_STATUS + sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS + echo 'CEOF + sed -f $tmp/defines.sed $tmp/in >$tmp/out + rm -f $tmp/in + mv $tmp/out $tmp/in + ' >>$CONFIG_STATUS + sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail + rm -f conftest.defines + mv conftest.tail conftest.defines + done + rm -f conftest.defines + echo ' fi # grep' >>$CONFIG_STATUS + echo >>$CONFIG_STATUS + + # Break up conftest.undefs because some shells have a limit on the size + # of here documents, and old seds have small limits too (100 cmds). + echo ' # Handle all the #undef templates' >>$CONFIG_STATUS + rm -f conftest.tail + while grep . conftest.undefs >/dev/null + do + # Write a limited-size here document to $tmp/undefs.sed. + echo ' cat >$tmp/undefs.sed <>$CONFIG_STATUS + # Speed up: don't consider the non `#undef' + echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS + # Work around the forget-to-reset-the-flag bug. + echo 't clr' >>$CONFIG_STATUS + echo ': clr' >>$CONFIG_STATUS + sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS + echo 'CEOF + sed -f $tmp/undefs.sed $tmp/in >$tmp/out + rm -f $tmp/in + mv $tmp/out $tmp/in + ' >>$CONFIG_STATUS + sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail + rm -f conftest.undefs + mv conftest.tail conftest.undefs + done + rm -f conftest.undefs + + cat >>$CONFIG_STATUS <<\_ACEOF + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + if test x"$ac_file" = x-; then + echo "/* Generated by configure. */" >$tmp/config.h + else + echo "/* $ac_file. Generated by configure. */" >$tmp/config.h + fi + cat $tmp/in >>$tmp/config.h + rm -f $tmp/in + if test x"$ac_file" != x-; then + if diff $ac_file $tmp/config.h >/dev/null 2>&1; then + { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 + echo "$as_me: $ac_file is unchanged" >&6;} + else + ac_dir=`(dirname "$ac_file") 2>/dev/null || + $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || + echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || + $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || + echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 + echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } + + rm -f $ac_file + mv $tmp/config.h $ac_file + fi + else + cat $tmp/config.h + rm -f $tmp/config.h + fi + # Compute $ac_file's index in $config_headers. + _am_stamp_count=1 + for _am_header in $config_headers :; do + case $_am_header in + $ac_file | $ac_file:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac + done + echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null || + $as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X$ac_file : 'X\(//\)[^/]' \| \ + X$ac_file : 'X\(//\)$' \| \ + X$ac_file : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || + echo X$ac_file | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'`/stamp-h$_am_stamp_count + done + _ACEOF + cat >>$CONFIG_STATUS <<\_ACEOF + + # + # CONFIG_COMMANDS section. + # + for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue + ac_dest=`echo "$ac_file" | sed 's,:.*,,'` + ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_dir=`(dirname "$ac_dest") 2>/dev/null || + $as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_dest" : 'X\(//\)[^/]' \| \ + X"$ac_dest" : 'X\(//\)$' \| \ + X"$ac_dest" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || + echo X"$ac_dest" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || + $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || + echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 + echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } + + ac_builddir=. + + if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` + else + ac_dir_suffix= ac_top_builddir= + fi + + case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; + esac + + # Do not use `cd foo && pwd` to compute absolute paths, because + # the directories may not exist. + case `pwd` in + .) ac_abs_builddir="$ac_dir";; + *) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; + esac + case $ac_abs_builddir in + .) ac_abs_top_builddir=${ac_top_builddir}.;; + *) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; + esac + case $ac_abs_builddir in + .) ac_abs_srcdir=$ac_srcdir;; + *) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; + esac + case $ac_abs_builddir in + .) ac_abs_top_srcdir=$ac_top_srcdir;; + *) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; + esac + + + { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 + echo "$as_me: executing $ac_dest commands" >&6;} + case $ac_dest in + depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # So let's grep whole file. + if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then + dirpart=`(dirname "$mf") 2>/dev/null || + $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ + X"$mf" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || + echo X"$mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`(dirname "$file") 2>/dev/null || + $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ + X"$file" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || + echo X"$file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p $dirpart/$fdir + else + as_dir=$dirpart/$fdir + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || + $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || + echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5 + echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} + { (exit 1); exit 1; }; }; } + + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done + ;; + esac + done + _ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF + + { (exit 0); exit 0; } + _ACEOF + chmod +x $CONFIG_STATUS + ac_clean_files=$ac_clean_files_save + + + # configure is writing to config.log, and then calls config.status. + # config.status does its own redirection, appending to config.log. + # Unfortunately, on DOS this fails, as config.log is still kept open + # by configure, so config.status won't be able to write to it; its + # output is simply discarded. So we exec the FD to /dev/null, + # effectively closing config.log, so it can be properly (re)opened and + # appended to by config.status. When coming back to configure, we + # need to make the FD available again. + if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || { (exit 1); exit 1; } + fi + diff -crN ./OTHERS/fontconfig/doc/Makefile.in /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/doc/Makefile.in *** ./OTHERS/fontconfig/doc/Makefile.in Thu Jan 1 01:00:00 1970 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/doc/Makefile.in Tue Nov 15 17:05:51 2005 *************** *** 0 **** --- 1,683 ---- + # Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, + # 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + + # This program is distributed in the hope that it will be useful, + # but WITHOUT ANY WARRANTY, to the extent permitted by law; without + # even the implied warranty of MERCHANTABILITY or FITNESS FOR A + # PARTICULAR PURPOSE. + + @SET_MAKE@ + + srcdir = @srcdir@ + top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ + top_builddir = .. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c + INSTALL_HEADER = $(INSTALL_DATA) + transform = $(program_transform_name) + NORMAL_INSTALL = : + PRE_INSTALL = : + POST_INSTALL = : + NORMAL_UNINSTALL = : + PRE_UNINSTALL = : + POST_UNINSTALL = : + build_triplet = @build@ + host_triplet = @host@ + noinst_PROGRAMS = edit-sgml$(EXEEXT) + subdir = doc + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(srcdir)/version.sgml.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/configure.in + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(install_sh) -d + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = version.sgml + PROGRAMS = $(noinst_PROGRAMS) + am_edit_sgml_OBJECTS = edit-sgml.$(OBJEXT) + edit_sgml_OBJECTS = $(am_edit_sgml_OBJECTS) + edit_sgml_LDADD = $(LDADD) + DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) + depcomp = + am__depfiles_maybe = + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) + LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) + CCLD = $(CC) + LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ + SOURCES = $(edit_sgml_SOURCES) + DIST_SOURCES = $(edit_sgml_SOURCES) + man3dir = $(mandir)/man3 + am__installdirs = "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(man5dir)" + man5dir = $(mandir)/man5 + NROFF = nroff + MANS = $(man_MANS) + ETAGS = etags + CTAGS = ctags + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + AMDEP_FALSE = @AMDEP_FALSE@ + AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AUTOCONF = @AUTOCONF@ + AUTOHEADER = @AUTOHEADER@ + AUTOMAKE = @AUTOMAKE@ + AWK = @AWK@ + CC = @CC@ + CCDEPMODE = @CCDEPMODE@ + CFLAGS = @CFLAGS@ + CONFDIR = @CONFDIR@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DEFS = @DEFS@ + DEPDIR = @DEPDIR@ + DOCDIR = @DOCDIR@ + ECHO = @ECHO@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ + ENABLE_DOCS_FALSE = @ENABLE_DOCS_FALSE@ + ENABLE_DOCS_TRUE = @ENABLE_DOCS_TRUE@ + EXEEXT = @EXEEXT@ + EXPAT_CFLAGS = @EXPAT_CFLAGS@ + EXPAT_LIBS = @EXPAT_LIBS@ + FC_ADD_FONTS = @FC_ADD_FONTS@ + FC_DEFAULT_FONTS = @FC_DEFAULT_FONTS@ + FC_FONTDATE = @FC_FONTDATE@ + FC_FONTPATH = @FC_FONTPATH@ + FREETYPE_CFLAGS = @FREETYPE_CFLAGS@ + FREETYPE_LIBS = @FREETYPE_LIBS@ + HASDOCBOOK = @HASDOCBOOK@ + HAVE_EXPAT = @HAVE_EXPAT@ + HAVE_XMLPARSE_H = @HAVE_XMLPARSE_H@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + LDFLAGS = @LDFLAGS@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + LT_CURRENT = @LT_CURRENT@ + LT_CURRENT_MINUS_AGE = @LT_CURRENT_MINUS_AGE@ + LT_REVISION = @LT_REVISION@ + LT_VERSION_INFO = @LT_VERSION_INFO@ + MAKEINFO = @MAKEINFO@ + MS_LIB_AVAILABLE_FALSE = @MS_LIB_AVAILABLE_FALSE@ + MS_LIB_AVAILABLE_TRUE = @MS_LIB_AVAILABLE_TRUE@ + OBJEXT = @OBJEXT@ + ORTH_FILES = @ORTH_FILES@ + OS_WIN32_FALSE = @OS_WIN32_FALSE@ + OS_WIN32_TRUE = @OS_WIN32_TRUE@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + RANLIB = @RANLIB@ + SET_MAKE = @SET_MAKE@ + SHELL = @SHELL@ + STRIP = @STRIP@ + VERSION = @VERSION@ + ac_ct_CC = @ac_ct_CC@ + ac_ct_RANLIB = @ac_ct_RANLIB@ + ac_ct_STRIP = @ac_ct_STRIP@ + am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ + am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ + am__tar = @am__tar@ + am__untar = @am__untar@ + bindir = @bindir@ + build = @build@ + build_alias = @build_alias@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ + confdir = @confdir@ + datadir = @datadir@ + exec_prefix = @exec_prefix@ + ft_config = @ft_config@ + host = @host@ + host_alias = @host_alias@ + host_cpu = @host_cpu@ + host_os = @host_os@ + host_vendor = @host_vendor@ + includedir = @includedir@ + infodir = @infodir@ + install_sh = @install_sh@ + libdir = @libdir@ + libexecdir = @libexecdir@ + localstatedir = @localstatedir@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + ms_librarian = @ms_librarian@ + oldincludedir = @oldincludedir@ + prefix = @prefix@ + program_transform_name = @program_transform_name@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ + DOC_SRC = $(srcdir) + DOC_MODULE = fontconfig + DOC2HTML = docbook2html + DOC2TXT = docbook2txt + DOC2MAN = docbook2man + TXT = fontconfig-user.txt fontconfig-devel.txt + HTML_FILES = fontconfig-user.html + HTML_DIRS = fontconfig-devel + SGML = fontconfig-user.sgml fontconfig-devel.sgml + FNCS_TMPL = ${DOC_SRC}/func.sgml + DOC_FUNCS_FNCS = \ + fcatomic.fncs \ + fcblanks.fncs \ + fccharset.fncs \ + fcconfig.fncs \ + fcconstant.fncs \ + fcfile.fncs \ + fcfontset.fncs \ + fcfreetype.fncs \ + fcinit.fncs \ + fcmatrix.fncs \ + fcobjectset.fncs \ + fcobjecttype.fncs \ + fcpattern.fncs \ + fcstring.fncs \ + fcstrset.fncs \ + fcvalue.fncs + + DOC_FUNCS_SGML = \ + fcatomic.sgml \ + fcblanks.sgml \ + fccharset.sgml \ + fcconfig.sgml \ + fcconstant.sgml \ + fcfile.sgml \ + fcfontset.sgml \ + fcfreetype.sgml \ + fcinit.sgml \ + fcmatrix.sgml \ + fcobjectset.sgml \ + fcobjecttype.sgml \ + fcpattern.sgml \ + fcstring.sgml \ + fcstrset.sgml \ + fcvalue.sgml + + man_MANS = fonts-conf.5 \ + FcAtomicCreate.3 FcAtomicDeleteNew.3 FcAtomicDestroy.3 FcAtomicLock.3 \ + FcAtomicNewFile.3 FcAtomicOrigFile.3 FcAtomicReplaceOrig.3 FcAtomicUnlock.3 \ + FcBlanksAdd.3 FcBlanksCreate.3 FcBlanksDestroy.3 FcBlanksIsMember.3 \ + FcCharSetAddChar.3 FcCharSetCopy.3 FcCharSetCount.3 FcCharSetCreate.3 \ + FcCharSetDestroy.3 FcCharSetEqual.3 FcCharSetFirstPage.3 FcCharSetHasChar.3 \ + FcCharSetIntersect.3 FcCharSetIntersectCount.3 FcCharSetIsSubset.3 \ + FcCharSetNextPage.3 FcCharSetSubtract.3 FcCharSetSubtractCount.3 \ + FcCharSetUnion.3 FcConfigAppFontAddDir.3 FcConfigAppFontAddFile.3 \ + FcConfigAppFontClear.3 FcConfigBuildFonts.3 FcConfigCreate.3 \ + FcConfigDestroy.3 FcConfigFilename.3 FcConfigGetBlanks.3 FcConfigGetCache.3 \ + FcConfigGetConfigDirs.3 FcConfigGetConfigFiles.3 FcConfigGetCurrent.3 \ + FcConfigGetFontDirs.3 FcConfigGetFonts.3 FcConfigGetRescanInverval.3 \ + FcConfigParseAndLoad.3 FcConfigSetCurrent.3 FcConfigSetRescanInverval.3 \ + FcConfigSubstitute.3 FcConfigSubstituteWithPat.3 FcConfigUptoDate.3 \ + FcDefaultSubstitute.3 FcDirCacheValid.3 FcDirSave.3 FcDirScan.3 FcFileScan.3 \ + FcFontList.3 FcFontMatch.3 FcFontRenderPrepare.3 FcFontSetAdd.3 \ + FcFontSetCreate.3 FcFontSetDestroy.3 FcFontSort.3 FcFreeTypeCharIndex.3 \ + FcFreeTypeCharSet.3 FcFreeTypeQuery.3 FcGetVersion.3 FcInit.3 \ + FcInitBringUptoDate.3 FcInitLoadConfig.3 FcInitLoadConfigAndFonts.3 \ + FcInitReinitialize.3 FcMatrixCopy.3 FcMatrixEqual.3 FcMatrixInit.3 \ + FcMatrixMultiply.3 FcMatrixRotate.3 FcMatrixScale.3 FcMatrixShear.3 \ + FcNameConstant.3 FcNameGetConstant.3 FcNameGetObjectType.3 FcNameParse.3 \ + FcNameRegisterConstants.3 FcNameRegisterObjectTypes.3 FcNameUnparse.3 \ + FcNameUnregisterConstants.3 FcNameUnregisterObjectTypes.3 FcObjectSetAdd.3 \ + FcObjectSetBuild.3 FcObjectSetCreate.3 FcObjectSetDestroy.3 \ + FcPatternAdd-Type.3 FcPatternAdd.3 FcPatternAddWeak.3 FcPatternBuild.3 \ + FcPatternCreate.3 FcPatternDel.3 FcPatternDestroy.3 FcPatternEqual.3 \ + FcPatternEqualSubset.3 FcPatternGet-Type.3 FcPatternGet.3 FcPatternHash.3 \ + FcPatternPrint.3 FcStrBasename.3 FcStrCmpIgnoreCase.3 FcStrCopy.3 \ + FcStrCopyFilename.3 FcStrDirname.3 FcStrListCreate.3 FcStrListDone.3 \ + FcStrListNext.3 FcStrSetAdd.3 FcStrSetAddFilename.3 FcStrSetCreate.3 \ + FcStrSetDel.3 FcStrSetDestroy.3 FcStrSetMember.3 FcUcs4ToUtf8.3 FcUtf16Len.3 \ + FcUtf16ToUcs4.3 FcUtf8Len.3 FcUtf8ToUcs4.3 FcValueDestroy.3 FcValueSave.3 + + edit_sgml_SOURCES = edit-sgml.c + DOC_FILES = $(TXT) $(HTML_FILES) + DOC_DIRS = $(HTML_DIRS) + LOCAL_DOCS = $(man_MANS) $(DOC_FILES) $(DOC_DIRS) + EXTRA_DIST = $(LOCAL_DOCS) $(SGML) $(DOC_FUNCS_FNCS) $(FNCS_TMPL) + SUFFIXES = .fncs .sgml .txt .html + @ENABLE_DOCS_TRUE@CLEANFILES = confdir.sgml local-fontconfig-user.sgml local-fontconfig-devel.sgml + all: all-am + + .SUFFIXES: + .SUFFIXES: .fncs .sgml .txt .html .c .lo .o .obj + $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu --ignore-deps doc/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu --ignore-deps doc/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + + $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + + $(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + version.sgml: $(top_builddir)/config.status $(srcdir)/version.sgml.in + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ + + clean-noinstPROGRAMS: + @list='$(noinst_PROGRAMS)'; for p in $$list; do \ + f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f $$p $$f"; \ + rm -f $$p $$f ; \ + done + edit-sgml$(EXEEXT): $(edit_sgml_OBJECTS) $(edit_sgml_DEPENDENCIES) + @rm -f edit-sgml$(EXEEXT) + $(LINK) $(edit_sgml_LDFLAGS) $(edit_sgml_OBJECTS) $(edit_sgml_LDADD) $(LIBS) + + mostlyclean-compile: + -rm -f *.$(OBJEXT) + + distclean-compile: + -rm -f *.tab.c + + .c.o: + $(COMPILE) -c $< + + .c.obj: + $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: + $(LTCOMPILE) -c -o $@ $< + + mostlyclean-libtool: + -rm -f *.lo + + clean-libtool: + -rm -rf .libs _libs + + distclean-libtool: + -rm -f libtool + uninstall-info-am: + install-man3: $(man3_MANS) $(man_MANS) + @$(NORMAL_INSTALL) + test -z "$(man3dir)" || $(mkdir_p) "$(DESTDIR)$(man3dir)" + @list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \ + l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ + for i in $$l2; do \ + case "$$i" in \ + *.3*) list="$$list $$i" ;; \ + esac; \ + done; \ + for i in $$list; do \ + if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ + else file=$$i; fi; \ + ext=`echo $$i | sed -e 's/^.*\\.//'`; \ + case "$$ext" in \ + 3*) ;; \ + *) ext='3' ;; \ + esac; \ + inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ + inst=`echo $$inst | sed -e 's/^.*\///'`; \ + inst=`echo $$inst | sed '$(transform)'`.$$ext; \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst"; \ + done + uninstall-man3: + @$(NORMAL_UNINSTALL) + @list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \ + l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ + for i in $$l2; do \ + case "$$i" in \ + *.3*) list="$$list $$i" ;; \ + esac; \ + done; \ + for i in $$list; do \ + ext=`echo $$i | sed -e 's/^.*\\.//'`; \ + case "$$ext" in \ + 3*) ;; \ + *) ext='3' ;; \ + esac; \ + inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ + inst=`echo $$inst | sed -e 's/^.*\///'`; \ + inst=`echo $$inst | sed '$(transform)'`.$$ext; \ + echo " rm -f '$(DESTDIR)$(man3dir)/$$inst'"; \ + rm -f "$(DESTDIR)$(man3dir)/$$inst"; \ + done + install-man5: $(man5_MANS) $(man_MANS) + @$(NORMAL_INSTALL) + test -z "$(man5dir)" || $(mkdir_p) "$(DESTDIR)$(man5dir)" + @list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \ + l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ + for i in $$l2; do \ + case "$$i" in \ + *.5*) list="$$list $$i" ;; \ + esac; \ + done; \ + for i in $$list; do \ + if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ + else file=$$i; fi; \ + ext=`echo $$i | sed -e 's/^.*\\.//'`; \ + case "$$ext" in \ + 5*) ;; \ + *) ext='5' ;; \ + esac; \ + inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ + inst=`echo $$inst | sed -e 's/^.*\///'`; \ + inst=`echo $$inst | sed '$(transform)'`.$$ext; \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst"; \ + done + uninstall-man5: + @$(NORMAL_UNINSTALL) + @list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \ + l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ + for i in $$l2; do \ + case "$$i" in \ + *.5*) list="$$list $$i" ;; \ + esac; \ + done; \ + for i in $$list; do \ + ext=`echo $$i | sed -e 's/^.*\\.//'`; \ + case "$$ext" in \ + 5*) ;; \ + *) ext='5' ;; \ + esac; \ + inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ + inst=`echo $$inst | sed -e 's/^.*\///'`; \ + inst=`echo $$inst | sed '$(transform)'`.$$ext; \ + echo " rm -f '$(DESTDIR)$(man5dir)/$$inst'"; \ + rm -f "$(DESTDIR)$(man5dir)/$$inst"; \ + done + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + mkid -fID $$unique + tags: TAGS + + TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi + ctags: CTAGS + CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) + $(mkdir_p) $(distdir)/${DOC_SRC} + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ + list='$(DISTFILES)'; for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ + esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkdir_p) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + check-am: all-am + check: check-am + all-am: Makefile $(PROGRAMS) $(MANS) all-local + installdirs: + for dir in "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(man5dir)"; do \ + test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: install-am + install-exec: install-exec-am + install-data: install-data-am + uninstall: uninstall-am + + install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + + installcheck: installcheck-am + install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + mostlyclean-generic: + + clean-generic: + -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + clean: clean-am + + clean-am: clean-generic clean-libtool clean-local clean-noinstPROGRAMS \ + mostlyclean-am + + distclean: distclean-am + -rm -f Makefile + distclean-am: clean-am distclean-compile distclean-generic \ + distclean-libtool distclean-tags + + dvi: dvi-am + + dvi-am: + + html: html-am + + info: info-am + + info-am: + + install-data-am: install-data-local install-man + + install-exec-am: + + install-info: install-info-am + + install-man: install-man3 install-man5 + + installcheck-am: + + maintainer-clean: maintainer-clean-am + -rm -f Makefile + maintainer-clean-am: distclean-am maintainer-clean-generic + + mostlyclean: mostlyclean-am + + mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + + pdf: pdf-am + + pdf-am: + + ps: ps-am + + ps-am: + + uninstall-am: uninstall-info-am uninstall-man + + uninstall-man: uninstall-man3 uninstall-man5 + + .PHONY: CTAGS GTAGS all all-am all-local check check-am clean \ + clean-generic clean-libtool clean-local clean-noinstPROGRAMS \ + ctags distclean distclean-compile distclean-generic \ + distclean-libtool distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-data-local install-exec \ + install-exec-am install-info install-info-am install-man \ + install-man3 install-man5 install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + tags uninstall uninstall-am uninstall-info-am uninstall-man \ + uninstall-man3 uninstall-man5 + + + @ENABLE_DOCS_TRUE@.fncs.sgml: + @ENABLE_DOCS_TRUE@ $(RM) $@ + @ENABLE_DOCS_TRUE@ ./edit-sgml $(FNCS_TMPL) < '$<' > $*.sgml + + @ENABLE_DOCS_TRUE@.sgml.txt: + @ENABLE_DOCS_TRUE@ $(RM) $@ + @ENABLE_DOCS_TRUE@ $(DOC2TXT) $< + + @ENABLE_DOCS_TRUE@$(man_MANS): func.refs + + @ENABLE_DOCS_TRUE@func.refs: local-fontconfig-devel.sgml $(DOC_FUNCS_SGML) version.sgml + @ENABLE_DOCS_TRUE@ $(RM) func.refs + @ENABLE_DOCS_TRUE@ $(DOC2MAN) local-fontconfig-devel.sgml + @ENABLE_DOCS_TRUE@ mv manpage.refs func.refs + @ENABLE_DOCS_TRUE@ $(RM) manpage.links + + @ENABLE_DOCS_TRUE@$(DOC_FUNCS_SGML): edit-sgml $(FNCS_TMPL) + + @ENABLE_DOCS_TRUE@fonts-conf.5: local-fontconfig-user.sgml version.sgml + @ENABLE_DOCS_TRUE@ $(RM) file.refs + @ENABLE_DOCS_TRUE@ $(DOC2MAN) local-fontconfig-user.sgml + @ENABLE_DOCS_TRUE@ $(RM) manpage.refs manpage.links + + @ENABLE_DOCS_TRUE@local-fontconfig-user.sgml: fontconfig-user.sgml + @ENABLE_DOCS_TRUE@ $(LN_S) $< $@ + + @ENABLE_DOCS_TRUE@all-local: $(LOCAL_DOCS) + + @ENABLE_DOCS_TRUE@clean-local: + @ENABLE_DOCS_TRUE@ $(RM) $(man_MANS) $(DOC_FILES) $(DOC_FUNCS_SGML) func.refs + @ENABLE_DOCS_TRUE@ $(RM) -r $(DOC_DIRS) + + @ENABLE_DOCS_TRUE@fontconfig-devel: local-fontconfig-devel.sgml $(DOCS_FUNCS_SGML) version.sgml + @ENABLE_DOCS_TRUE@ $(RM) -r fontconfig-devel + @ENABLE_DOCS_TRUE@ $(DOC2HTML) -o fontconfig-devel local-fontconfig-devel.sgml + + @ENABLE_DOCS_TRUE@local-fontconfig-devel.sgml: fontconfig-devel.sgml + @ENABLE_DOCS_TRUE@ $(LN_S) $< $@ + + @ENABLE_DOCS_TRUE@fontconfig-devel.txt: local-fontconfig-devel.sgml version.sgml + @ENABLE_DOCS_TRUE@ $(RM) $@ + @ENABLE_DOCS_TRUE@ $(DOC2TXT) local-fontconfig-devel.sgml + @ENABLE_DOCS_TRUE@ mv local-fontconfig-devel.txt $@ + + @ENABLE_DOCS_TRUE@fontconfig-user.html: local-fontconfig-user.sgml version.sgml + @ENABLE_DOCS_TRUE@ $(RM) $@ local-$@ $@.tmp + @ENABLE_DOCS_TRUE@ $(DOC2HTML) -u local-fontconfig-user.sgml > $@.tmp + @ENABLE_DOCS_TRUE@ -test -f local-$@ && mv local-$@ $@ + @ENABLE_DOCS_TRUE@ -test -f $@ || mv $@.tmp $@ + @ENABLE_DOCS_TRUE@ -test -f $@.tmp && $(RM) $@.tmp + + @ENABLE_DOCS_TRUE@fontconfig-user.txt: local-fontconfig-user.sgml version.sgml + @ENABLE_DOCS_TRUE@ $(RM) $@ + @ENABLE_DOCS_TRUE@ $(DOC2TXT) local-fontconfig-user.sgml + @ENABLE_DOCS_TRUE@ mv local-fontconfig-user.txt $@ + + @ENABLE_DOCS_FALSE@all-local: + @ENABLE_DOCS_FALSE@clean-local: + + install-data-local: + $(mkinstalldirs) $(DESTDIR)$(DOCDIR) + for i in $(DOC_FILES); do \ + echo '-- Installing '$(srcdir)/$$i ; \ + $(INSTALL_DATA) $(srcdir)/$$i $(DESTDIR)$(DOCDIR)/$$i; \ + done + for i in $(srcdir)/$(DOC_DIRS); do \ + $(mkinstalldirs) $(DESTDIR)$(DOCDIR)/$$i ; \ + for f in $$i/*; do \ + echo '-- Installing '$$f ; \ + $(INSTALL_DATA) $$f $(DESTDIR)$(DOCDIR)/$$f; \ + done \ + done + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: diff -crN ./OTHERS/fontconfig/fc-cache/Makefile.in /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/fc-cache/Makefile.in *** ./OTHERS/fontconfig/fc-cache/Makefile.in Thu Jan 1 01:00:00 1970 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/fc-cache/Makefile.in Tue Nov 15 17:05:52 2005 *************** *** 0 **** --- 1,518 ---- + # Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, + # 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + + # This program is distributed in the hope that it will be useful, + # but WITHOUT ANY WARRANTY, to the extent permitted by law; without + # even the implied warranty of MERCHANTABILITY or FITNESS FOR A + # PARTICULAR PURPOSE. + + @SET_MAKE@ + + # + # $Id: Makefile.am,v 1.3 2003/03/07 20:04:13 keithp Exp $ + # + # Copyright © 2003 Keith Packard + # + # Permission to use, copy, modify, distribute, and sell this software and its + # documentation for any purpose is hereby granted without fee, provided that + # the above copyright notice appear in all copies and that both that + # copyright notice and this permission notice appear in supporting + # documentation, and that the name of Keith Packard not be used in + # advertising or publicity pertaining to distribution of the software without + # specific, written prior permission. Keith Packard makes no + # representations about the suitability of this software for any purpose. It + # is provided "as is" without express or implied warranty. + # + # KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + # INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + # EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR + # CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + # DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + # TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + # PERFORMANCE OF THIS SOFTWARE. + + srcdir = @srcdir@ + top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ + top_builddir = .. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c + INSTALL_HEADER = $(INSTALL_DATA) + transform = $(program_transform_name) + NORMAL_INSTALL = : + PRE_INSTALL = : + POST_INSTALL = : + NORMAL_UNINSTALL = : + PRE_UNINSTALL = : + POST_UNINSTALL = : + build_triplet = @build@ + host_triplet = @host@ + bin_PROGRAMS = fc-cache$(EXEEXT) + subdir = fc-cache + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/configure.in + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(install_sh) -d + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = + am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" + binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) + PROGRAMS = $(bin_PROGRAMS) + fc_cache_SOURCES = fc-cache.c + fc_cache_OBJECTS = fc-cache.$(OBJEXT) + fc_cache_DEPENDENCIES = ../src/libfontconfig.la + DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) + depcomp = + am__depfiles_maybe = + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) + LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) + CCLD = $(CC) + LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ + SOURCES = fc-cache.c + DIST_SOURCES = fc-cache.c + man1dir = $(mandir)/man1 + NROFF = nroff + MANS = $(man1_MANS) + ETAGS = etags + CTAGS = ctags + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + AMDEP_FALSE = @AMDEP_FALSE@ + AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AUTOCONF = @AUTOCONF@ + AUTOHEADER = @AUTOHEADER@ + AUTOMAKE = @AUTOMAKE@ + AWK = @AWK@ + CC = @CC@ + CCDEPMODE = @CCDEPMODE@ + CFLAGS = @CFLAGS@ + CONFDIR = @CONFDIR@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DEFS = @DEFS@ + DEPDIR = @DEPDIR@ + DOCDIR = @DOCDIR@ + ECHO = @ECHO@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ + ENABLE_DOCS_FALSE = @ENABLE_DOCS_FALSE@ + ENABLE_DOCS_TRUE = @ENABLE_DOCS_TRUE@ + EXEEXT = @EXEEXT@ + EXPAT_CFLAGS = @EXPAT_CFLAGS@ + EXPAT_LIBS = @EXPAT_LIBS@ + FC_ADD_FONTS = @FC_ADD_FONTS@ + FC_DEFAULT_FONTS = @FC_DEFAULT_FONTS@ + FC_FONTDATE = @FC_FONTDATE@ + FC_FONTPATH = @FC_FONTPATH@ + FREETYPE_CFLAGS = @FREETYPE_CFLAGS@ + FREETYPE_LIBS = @FREETYPE_LIBS@ + HASDOCBOOK = @HASDOCBOOK@ + HAVE_EXPAT = @HAVE_EXPAT@ + HAVE_XMLPARSE_H = @HAVE_XMLPARSE_H@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + LDFLAGS = @LDFLAGS@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + LT_CURRENT = @LT_CURRENT@ + LT_CURRENT_MINUS_AGE = @LT_CURRENT_MINUS_AGE@ + LT_REVISION = @LT_REVISION@ + LT_VERSION_INFO = @LT_VERSION_INFO@ + MAKEINFO = @MAKEINFO@ + MS_LIB_AVAILABLE_FALSE = @MS_LIB_AVAILABLE_FALSE@ + MS_LIB_AVAILABLE_TRUE = @MS_LIB_AVAILABLE_TRUE@ + OBJEXT = @OBJEXT@ + ORTH_FILES = @ORTH_FILES@ + OS_WIN32_FALSE = @OS_WIN32_FALSE@ + OS_WIN32_TRUE = @OS_WIN32_TRUE@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + RANLIB = @RANLIB@ + SET_MAKE = @SET_MAKE@ + SHELL = @SHELL@ + STRIP = @STRIP@ + VERSION = @VERSION@ + ac_ct_CC = @ac_ct_CC@ + ac_ct_RANLIB = @ac_ct_RANLIB@ + ac_ct_STRIP = @ac_ct_STRIP@ + am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ + am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ + am__tar = @am__tar@ + am__untar = @am__untar@ + bindir = @bindir@ + build = @build@ + build_alias = @build_alias@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ + confdir = @confdir@ + datadir = @datadir@ + exec_prefix = @exec_prefix@ + ft_config = @ft_config@ + host = @host@ + host_alias = @host_alias@ + host_cpu = @host_cpu@ + host_os = @host_os@ + host_vendor = @host_vendor@ + includedir = @includedir@ + infodir = @infodir@ + install_sh = @install_sh@ + libdir = @libdir@ + libexecdir = @libexecdir@ + localstatedir = @localstatedir@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + ms_librarian = @ms_librarian@ + oldincludedir = @oldincludedir@ + prefix = @prefix@ + program_transform_name = @program_transform_name@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ + INCLUDES = $(FREETYPE_CFLAGS) + man1_MANS = fc-cache.man + EXTRA_DIST = $(man1_MANS) + fc_cache_LDADD = ../src/libfontconfig.la + all: all-am + + .SUFFIXES: + .SUFFIXES: .c .lo .o .obj + $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu --ignore-deps fc-cache/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu --ignore-deps fc-cache/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + + $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + + $(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)" + @list='$(bin_PROGRAMS)'; for p in $$list; do \ + p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ + if test -f $$p \ + || test -f $$p1 \ + ; then \ + f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ + echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \ + $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \ + else :; fi; \ + done + + uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + @list='$(bin_PROGRAMS)'; for p in $$list; do \ + f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ + echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ + rm -f "$(DESTDIR)$(bindir)/$$f"; \ + done + + clean-binPROGRAMS: + @list='$(bin_PROGRAMS)'; for p in $$list; do \ + f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f $$p $$f"; \ + rm -f $$p $$f ; \ + done + fc-cache$(EXEEXT): $(fc_cache_OBJECTS) $(fc_cache_DEPENDENCIES) + @rm -f fc-cache$(EXEEXT) + $(LINK) $(fc_cache_LDFLAGS) $(fc_cache_OBJECTS) $(fc_cache_LDADD) $(LIBS) + + mostlyclean-compile: + -rm -f *.$(OBJEXT) + + distclean-compile: + -rm -f *.tab.c + + .c.o: + $(COMPILE) -c $< + + .c.obj: + $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: + $(LTCOMPILE) -c -o $@ $< + + mostlyclean-libtool: + -rm -f *.lo + + clean-libtool: + -rm -rf .libs _libs + + distclean-libtool: + -rm -f libtool + uninstall-info-am: + install-man1: $(man1_MANS) $(man_MANS) + @$(NORMAL_INSTALL) + test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)" + @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ + l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ + for i in $$l2; do \ + case "$$i" in \ + *.1*) list="$$list $$i" ;; \ + esac; \ + done; \ + for i in $$list; do \ + if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ + else file=$$i; fi; \ + ext=`echo $$i | sed -e 's/^.*\\.//'`; \ + case "$$ext" in \ + 1*) ;; \ + *) ext='1' ;; \ + esac; \ + inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ + inst=`echo $$inst | sed -e 's/^.*\///'`; \ + inst=`echo $$inst | sed '$(transform)'`.$$ext; \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \ + done + uninstall-man1: + @$(NORMAL_UNINSTALL) + @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ + l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ + for i in $$l2; do \ + case "$$i" in \ + *.1*) list="$$list $$i" ;; \ + esac; \ + done; \ + for i in $$list; do \ + ext=`echo $$i | sed -e 's/^.*\\.//'`; \ + case "$$ext" in \ + 1*) ;; \ + *) ext='1' ;; \ + esac; \ + inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ + inst=`echo $$inst | sed -e 's/^.*\///'`; \ + inst=`echo $$inst | sed '$(transform)'`.$$ext; \ + echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \ + rm -f "$(DESTDIR)$(man1dir)/$$inst"; \ + done + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + mkid -fID $$unique + tags: TAGS + + TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi + ctags: CTAGS + CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ + list='$(DISTFILES)'; for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ + esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkdir_p) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + check-am: all-am + check: check-am + all-am: Makefile $(PROGRAMS) $(MANS) + installdirs: + for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \ + test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: install-am + install-exec: install-exec-am + install-data: install-data-am + uninstall: uninstall-am + + install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + + installcheck: installcheck-am + install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + mostlyclean-generic: + + clean-generic: + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + clean: clean-am + + clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am + + distclean: distclean-am + -rm -f Makefile + distclean-am: clean-am distclean-compile distclean-generic \ + distclean-libtool distclean-tags + + dvi: dvi-am + + dvi-am: + + html: html-am + + info: info-am + + info-am: + + install-data-am: install-man + + install-exec-am: install-binPROGRAMS + + install-info: install-info-am + + install-man: install-man1 + + installcheck-am: + + maintainer-clean: maintainer-clean-am + -rm -f Makefile + maintainer-clean-am: distclean-am maintainer-clean-generic + + mostlyclean: mostlyclean-am + + mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + + pdf: pdf-am + + pdf-am: + + ps: ps-am + + ps-am: + + uninstall-am: uninstall-binPROGRAMS uninstall-info-am uninstall-man + + uninstall-man: uninstall-man1 + + .PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ + clean-generic clean-libtool ctags distclean distclean-compile \ + distclean-generic distclean-libtool distclean-tags distdir dvi \ + dvi-am html html-am info info-am install install-am \ + install-binPROGRAMS install-data install-data-am install-exec \ + install-exec-am install-info install-info-am install-man \ + install-man1 install-strip installcheck installcheck-am \ + installdirs maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \ + uninstall-am uninstall-binPROGRAMS uninstall-info-am \ + uninstall-man uninstall-man1 + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: diff -crN ./OTHERS/fontconfig/fc-lang/Makefile.in /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/fc-lang/Makefile.in *** ./OTHERS/fontconfig/fc-lang/Makefile.in Thu Jan 1 01:00:00 1970 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/fc-lang/Makefile.in Tue Nov 15 17:05:54 2005 *************** *** 0 **** --- 1,456 ---- + # Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, + # 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + + # This program is distributed in the hope that it will be useful, + # but WITHOUT ANY WARRANTY, to the extent permitted by law; without + # even the implied warranty of MERCHANTABILITY or FITNESS FOR A + # PARTICULAR PURPOSE. + + @SET_MAKE@ + + # + # $Id $ + # + # Copyright © 2003 Keith Packard + # + # Permission to use, copy, modify, distribute, and sell this software and its + # documentation for any purpose is hereby granted without fee, provided that + # the above copyright notice appear in all copies and that both that + # copyright notice and this permission notice appear in supporting + # documentation, and that the name of Keith Packard not be used in + # advertising or publicity pertaining to distribution of the software without + # specific, written prior permission. Keith Packard makes no + # representations about the suitability of this software for any purpose. It + # is provided "as is" without express or implied warranty. + # + # KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + # INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + # EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR + # CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + # DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + # TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + # PERFORMANCE OF THIS SOFTWARE. + # + + + srcdir = @srcdir@ + top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ + top_builddir = .. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c + INSTALL_HEADER = $(INSTALL_DATA) + transform = $(program_transform_name) + NORMAL_INSTALL = : + PRE_INSTALL = : + POST_INSTALL = : + NORMAL_UNINSTALL = : + PRE_UNINSTALL = : + POST_UNINSTALL = : + build_triplet = @build@ + host_triplet = @host@ + noinst_PROGRAMS = fc-lang$(EXEEXT) + subdir = fc-lang + DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/configure.in + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(install_sh) -d + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = + PROGRAMS = $(noinst_PROGRAMS) + fc_lang_SOURCES = fc-lang.c + fc_lang_OBJECTS = fc-lang.$(OBJEXT) + fc_lang_LDADD = $(LDADD) + DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) + depcomp = + am__depfiles_maybe = + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) + LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) + CCLD = $(CC) + LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ + SOURCES = fc-lang.c + DIST_SOURCES = fc-lang.c + HEADERS = $(noinst_HEADERS) + ETAGS = etags + CTAGS = ctags + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + AMDEP_FALSE = @AMDEP_FALSE@ + AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AUTOCONF = @AUTOCONF@ + AUTOHEADER = @AUTOHEADER@ + AUTOMAKE = @AUTOMAKE@ + AWK = @AWK@ + CC = @CC@ + CCDEPMODE = @CCDEPMODE@ + CFLAGS = @CFLAGS@ + CONFDIR = @CONFDIR@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DEFS = @DEFS@ + DEPDIR = @DEPDIR@ + DOCDIR = @DOCDIR@ + ECHO = @ECHO@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ + ENABLE_DOCS_FALSE = @ENABLE_DOCS_FALSE@ + ENABLE_DOCS_TRUE = @ENABLE_DOCS_TRUE@ + EXEEXT = @EXEEXT@ + EXPAT_CFLAGS = @EXPAT_CFLAGS@ + EXPAT_LIBS = @EXPAT_LIBS@ + FC_ADD_FONTS = @FC_ADD_FONTS@ + FC_DEFAULT_FONTS = @FC_DEFAULT_FONTS@ + FC_FONTDATE = @FC_FONTDATE@ + FC_FONTPATH = @FC_FONTPATH@ + FREETYPE_CFLAGS = @FREETYPE_CFLAGS@ + FREETYPE_LIBS = @FREETYPE_LIBS@ + HASDOCBOOK = @HASDOCBOOK@ + HAVE_EXPAT = @HAVE_EXPAT@ + HAVE_XMLPARSE_H = @HAVE_XMLPARSE_H@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + LDFLAGS = @LDFLAGS@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + LT_CURRENT = @LT_CURRENT@ + LT_CURRENT_MINUS_AGE = @LT_CURRENT_MINUS_AGE@ + LT_REVISION = @LT_REVISION@ + LT_VERSION_INFO = @LT_VERSION_INFO@ + MAKEINFO = @MAKEINFO@ + MS_LIB_AVAILABLE_FALSE = @MS_LIB_AVAILABLE_FALSE@ + MS_LIB_AVAILABLE_TRUE = @MS_LIB_AVAILABLE_TRUE@ + OBJEXT = @OBJEXT@ + ORTH_FILES = @ORTH_FILES@ + OS_WIN32_FALSE = @OS_WIN32_FALSE@ + OS_WIN32_TRUE = @OS_WIN32_TRUE@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + RANLIB = @RANLIB@ + SET_MAKE = @SET_MAKE@ + SHELL = @SHELL@ + STRIP = @STRIP@ + VERSION = @VERSION@ + ac_ct_CC = @ac_ct_CC@ + ac_ct_RANLIB = @ac_ct_RANLIB@ + ac_ct_STRIP = @ac_ct_STRIP@ + am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ + am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ + am__tar = @am__tar@ + am__untar = @am__untar@ + bindir = @bindir@ + build = @build@ + build_alias = @build_alias@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ + confdir = @confdir@ + datadir = @datadir@ + exec_prefix = @exec_prefix@ + ft_config = @ft_config@ + host = @host@ + host_alias = @host_alias@ + host_cpu = @host_cpu@ + host_os = @host_os@ + host_vendor = @host_vendor@ + includedir = @includedir@ + infodir = @infodir@ + install_sh = @install_sh@ + libdir = @libdir@ + libexecdir = @libexecdir@ + localstatedir = @localstatedir@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + ms_librarian = @ms_librarian@ + oldincludedir = @oldincludedir@ + prefix = @prefix@ + program_transform_name = @program_transform_name@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ + INCLUDES = -I${top_srcdir}/src -I${top_srcdir} $(FREETYPE_CFLAGS) + TMPL = fclang.tmpl.h + STMPL = ${top_srcdir}/fc-lang/fclang.tmpl.h + TARG = fclang.h + noinst_HEADERS = $(TARG) + noinst_MANS = fc-lang.man + ORTH = @ORTH_FILES@ + EXTRA_DIST = $(TMPL) $(ORTH) + CLEANFILES = $(TARG) + all: all-am + + .SUFFIXES: + .SUFFIXES: .c .lo .o .obj + $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu --ignore-deps fc-lang/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu --ignore-deps fc-lang/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + + $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + + $(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + + clean-noinstPROGRAMS: + @list='$(noinst_PROGRAMS)'; for p in $$list; do \ + f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f $$p $$f"; \ + rm -f $$p $$f ; \ + done + fc-lang$(EXEEXT): $(fc_lang_OBJECTS) $(fc_lang_DEPENDENCIES) + @rm -f fc-lang$(EXEEXT) + $(LINK) $(fc_lang_LDFLAGS) $(fc_lang_OBJECTS) $(fc_lang_LDADD) $(LIBS) + + mostlyclean-compile: + -rm -f *.$(OBJEXT) + + distclean-compile: + -rm -f *.tab.c + + .c.o: + $(COMPILE) -c $< + + .c.obj: + $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: + $(LTCOMPILE) -c -o $@ $< + + mostlyclean-libtool: + -rm -f *.lo + + clean-libtool: + -rm -rf .libs _libs + + distclean-libtool: + -rm -f libtool + uninstall-info-am: + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + mkid -fID $$unique + tags: TAGS + + TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi + ctags: CTAGS + CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ + list='$(DISTFILES)'; for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ + esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkdir_p) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + check-am: all-am + check: check-am + all-am: Makefile $(PROGRAMS) $(HEADERS) + installdirs: + install: install-am + install-exec: install-exec-am + install-data: install-data-am + uninstall: uninstall-am + + install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + + installcheck: installcheck-am + install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + mostlyclean-generic: + + clean-generic: + -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + clean: clean-am + + clean-am: clean-generic clean-libtool clean-noinstPROGRAMS \ + mostlyclean-am + + distclean: distclean-am + -rm -f Makefile + distclean-am: clean-am distclean-compile distclean-generic \ + distclean-libtool distclean-tags + + dvi: dvi-am + + dvi-am: + + html: html-am + + info: info-am + + info-am: + + install-data-am: + + install-exec-am: + + install-info: install-info-am + + install-man: + + installcheck-am: + + maintainer-clean: maintainer-clean-am + -rm -f Makefile + maintainer-clean-am: distclean-am maintainer-clean-generic + + mostlyclean: mostlyclean-am + + mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + + pdf: pdf-am + + pdf-am: + + ps: ps-am + + ps-am: + + uninstall-am: uninstall-info-am + + .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ + clean-libtool clean-noinstPROGRAMS ctags distclean \ + distclean-compile distclean-generic distclean-libtool \ + distclean-tags distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-exec \ + install-exec-am install-info install-info-am install-man \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ + pdf pdf-am ps ps-am tags uninstall uninstall-am \ + uninstall-info-am + + + $(TARG): $(STMPL) fc-lang $(ORTH) + rm -f $(TARG) + dir=`pwd`; (cd ${srcdir} && $${dir}/fc-lang $(ORTH)) < $(STMPL) > $(TARG) + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: diff -crN ./OTHERS/fontconfig/fc-list/Makefile.in /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/fc-list/Makefile.in *** ./OTHERS/fontconfig/fc-list/Makefile.in Thu Jan 1 01:00:00 1970 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/fc-list/Makefile.in Tue Nov 15 17:05:55 2005 *************** *** 0 **** --- 1,518 ---- + # Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, + # 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + + # This program is distributed in the hope that it will be useful, + # but WITHOUT ANY WARRANTY, to the extent permitted by law; without + # even the implied warranty of MERCHANTABILITY or FITNESS FOR A + # PARTICULAR PURPOSE. + + @SET_MAKE@ + + # + # $Id: Makefile.am,v 1.3 2003/03/10 06:56:32 keithp Exp $ + # + # Copyright © 2003 Keith Packard + # + # Permission to use, copy, modify, distribute, and sell this software and its + # documentation for any purpose is hereby granted without fee, provided that + # the above copyright notice appear in all copies and that both that + # copyright notice and this permission notice appear in supporting + # documentation, and that the name of Keith Packard not be used in + # advertising or publicity pertaining to distribution of the software without + # specific, written prior permission. Keith Packard makes no + # representations about the suitability of this software for any purpose. It + # is provided "as is" without express or implied warranty. + # + # KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + # INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + # EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR + # CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + # DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + # TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + # PERFORMANCE OF THIS SOFTWARE. + + srcdir = @srcdir@ + top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ + top_builddir = .. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c + INSTALL_HEADER = $(INSTALL_DATA) + transform = $(program_transform_name) + NORMAL_INSTALL = : + PRE_INSTALL = : + POST_INSTALL = : + NORMAL_UNINSTALL = : + PRE_UNINSTALL = : + POST_UNINSTALL = : + build_triplet = @build@ + host_triplet = @host@ + bin_PROGRAMS = fc-list$(EXEEXT) + subdir = fc-list + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/configure.in + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(install_sh) -d + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = + am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" + binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) + PROGRAMS = $(bin_PROGRAMS) + fc_list_SOURCES = fc-list.c + fc_list_OBJECTS = fc-list.$(OBJEXT) + fc_list_DEPENDENCIES = ../src/libfontconfig.la + DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) + depcomp = + am__depfiles_maybe = + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) + LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) + CCLD = $(CC) + LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ + SOURCES = fc-list.c + DIST_SOURCES = fc-list.c + man1dir = $(mandir)/man1 + NROFF = nroff + MANS = $(man1_MANS) + ETAGS = etags + CTAGS = ctags + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + AMDEP_FALSE = @AMDEP_FALSE@ + AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AUTOCONF = @AUTOCONF@ + AUTOHEADER = @AUTOHEADER@ + AUTOMAKE = @AUTOMAKE@ + AWK = @AWK@ + CC = @CC@ + CCDEPMODE = @CCDEPMODE@ + CFLAGS = @CFLAGS@ + CONFDIR = @CONFDIR@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DEFS = @DEFS@ + DEPDIR = @DEPDIR@ + DOCDIR = @DOCDIR@ + ECHO = @ECHO@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ + ENABLE_DOCS_FALSE = @ENABLE_DOCS_FALSE@ + ENABLE_DOCS_TRUE = @ENABLE_DOCS_TRUE@ + EXEEXT = @EXEEXT@ + EXPAT_CFLAGS = @EXPAT_CFLAGS@ + EXPAT_LIBS = @EXPAT_LIBS@ + FC_ADD_FONTS = @FC_ADD_FONTS@ + FC_DEFAULT_FONTS = @FC_DEFAULT_FONTS@ + FC_FONTDATE = @FC_FONTDATE@ + FC_FONTPATH = @FC_FONTPATH@ + FREETYPE_CFLAGS = @FREETYPE_CFLAGS@ + FREETYPE_LIBS = @FREETYPE_LIBS@ + HASDOCBOOK = @HASDOCBOOK@ + HAVE_EXPAT = @HAVE_EXPAT@ + HAVE_XMLPARSE_H = @HAVE_XMLPARSE_H@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + LDFLAGS = @LDFLAGS@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + LT_CURRENT = @LT_CURRENT@ + LT_CURRENT_MINUS_AGE = @LT_CURRENT_MINUS_AGE@ + LT_REVISION = @LT_REVISION@ + LT_VERSION_INFO = @LT_VERSION_INFO@ + MAKEINFO = @MAKEINFO@ + MS_LIB_AVAILABLE_FALSE = @MS_LIB_AVAILABLE_FALSE@ + MS_LIB_AVAILABLE_TRUE = @MS_LIB_AVAILABLE_TRUE@ + OBJEXT = @OBJEXT@ + ORTH_FILES = @ORTH_FILES@ + OS_WIN32_FALSE = @OS_WIN32_FALSE@ + OS_WIN32_TRUE = @OS_WIN32_TRUE@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + RANLIB = @RANLIB@ + SET_MAKE = @SET_MAKE@ + SHELL = @SHELL@ + STRIP = @STRIP@ + VERSION = @VERSION@ + ac_ct_CC = @ac_ct_CC@ + ac_ct_RANLIB = @ac_ct_RANLIB@ + ac_ct_STRIP = @ac_ct_STRIP@ + am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ + am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ + am__tar = @am__tar@ + am__untar = @am__untar@ + bindir = @bindir@ + build = @build@ + build_alias = @build_alias@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ + confdir = @confdir@ + datadir = @datadir@ + exec_prefix = @exec_prefix@ + ft_config = @ft_config@ + host = @host@ + host_alias = @host_alias@ + host_cpu = @host_cpu@ + host_os = @host_os@ + host_vendor = @host_vendor@ + includedir = @includedir@ + infodir = @infodir@ + install_sh = @install_sh@ + libdir = @libdir@ + libexecdir = @libexecdir@ + localstatedir = @localstatedir@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + ms_librarian = @ms_librarian@ + oldincludedir = @oldincludedir@ + prefix = @prefix@ + program_transform_name = @program_transform_name@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ + man1_MANS = fc-list.man + INCLUDES = $(FREETYPE_CFLAGS) + EXTRA_DIST = $(man1_MANS) + fc_list_LDADD = ../src/libfontconfig.la + all: all-am + + .SUFFIXES: + .SUFFIXES: .c .lo .o .obj + $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu --ignore-deps fc-list/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu --ignore-deps fc-list/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + + $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + + $(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)" + @list='$(bin_PROGRAMS)'; for p in $$list; do \ + p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ + if test -f $$p \ + || test -f $$p1 \ + ; then \ + f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ + echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \ + $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \ + else :; fi; \ + done + + uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + @list='$(bin_PROGRAMS)'; for p in $$list; do \ + f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ + echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ + rm -f "$(DESTDIR)$(bindir)/$$f"; \ + done + + clean-binPROGRAMS: + @list='$(bin_PROGRAMS)'; for p in $$list; do \ + f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f $$p $$f"; \ + rm -f $$p $$f ; \ + done + fc-list$(EXEEXT): $(fc_list_OBJECTS) $(fc_list_DEPENDENCIES) + @rm -f fc-list$(EXEEXT) + $(LINK) $(fc_list_LDFLAGS) $(fc_list_OBJECTS) $(fc_list_LDADD) $(LIBS) + + mostlyclean-compile: + -rm -f *.$(OBJEXT) + + distclean-compile: + -rm -f *.tab.c + + .c.o: + $(COMPILE) -c $< + + .c.obj: + $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: + $(LTCOMPILE) -c -o $@ $< + + mostlyclean-libtool: + -rm -f *.lo + + clean-libtool: + -rm -rf .libs _libs + + distclean-libtool: + -rm -f libtool + uninstall-info-am: + install-man1: $(man1_MANS) $(man_MANS) + @$(NORMAL_INSTALL) + test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)" + @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ + l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ + for i in $$l2; do \ + case "$$i" in \ + *.1*) list="$$list $$i" ;; \ + esac; \ + done; \ + for i in $$list; do \ + if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ + else file=$$i; fi; \ + ext=`echo $$i | sed -e 's/^.*\\.//'`; \ + case "$$ext" in \ + 1*) ;; \ + *) ext='1' ;; \ + esac; \ + inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ + inst=`echo $$inst | sed -e 's/^.*\///'`; \ + inst=`echo $$inst | sed '$(transform)'`.$$ext; \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \ + done + uninstall-man1: + @$(NORMAL_UNINSTALL) + @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ + l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ + for i in $$l2; do \ + case "$$i" in \ + *.1*) list="$$list $$i" ;; \ + esac; \ + done; \ + for i in $$list; do \ + ext=`echo $$i | sed -e 's/^.*\\.//'`; \ + case "$$ext" in \ + 1*) ;; \ + *) ext='1' ;; \ + esac; \ + inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ + inst=`echo $$inst | sed -e 's/^.*\///'`; \ + inst=`echo $$inst | sed '$(transform)'`.$$ext; \ + echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \ + rm -f "$(DESTDIR)$(man1dir)/$$inst"; \ + done + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + mkid -fID $$unique + tags: TAGS + + TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi + ctags: CTAGS + CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ + list='$(DISTFILES)'; for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ + esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkdir_p) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + check-am: all-am + check: check-am + all-am: Makefile $(PROGRAMS) $(MANS) + installdirs: + for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \ + test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: install-am + install-exec: install-exec-am + install-data: install-data-am + uninstall: uninstall-am + + install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + + installcheck: installcheck-am + install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + mostlyclean-generic: + + clean-generic: + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + clean: clean-am + + clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am + + distclean: distclean-am + -rm -f Makefile + distclean-am: clean-am distclean-compile distclean-generic \ + distclean-libtool distclean-tags + + dvi: dvi-am + + dvi-am: + + html: html-am + + info: info-am + + info-am: + + install-data-am: install-man + + install-exec-am: install-binPROGRAMS + + install-info: install-info-am + + install-man: install-man1 + + installcheck-am: + + maintainer-clean: maintainer-clean-am + -rm -f Makefile + maintainer-clean-am: distclean-am maintainer-clean-generic + + mostlyclean: mostlyclean-am + + mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + + pdf: pdf-am + + pdf-am: + + ps: ps-am + + ps-am: + + uninstall-am: uninstall-binPROGRAMS uninstall-info-am uninstall-man + + uninstall-man: uninstall-man1 + + .PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ + clean-generic clean-libtool ctags distclean distclean-compile \ + distclean-generic distclean-libtool distclean-tags distdir dvi \ + dvi-am html html-am info info-am install install-am \ + install-binPROGRAMS install-data install-data-am install-exec \ + install-exec-am install-info install-info-am install-man \ + install-man1 install-strip installcheck installcheck-am \ + installdirs maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \ + uninstall-am uninstall-binPROGRAMS uninstall-info-am \ + uninstall-man uninstall-man1 + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: diff -crN ./OTHERS/fontconfig/fontconfig/Makefile.in /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/fontconfig/Makefile.in *** ./OTHERS/fontconfig/fontconfig/Makefile.in Thu Jan 1 01:00:00 1970 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/fontconfig/Makefile.in Tue Nov 15 17:05:56 2005 *************** *** 0 **** --- 1,410 ---- + # Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, + # 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + + # This program is distributed in the hope that it will be useful, + # but WITHOUT ANY WARRANTY, to the extent permitted by law; without + # even the implied warranty of MERCHANTABILITY or FITNESS FOR A + # PARTICULAR PURPOSE. + + @SET_MAKE@ + + srcdir = @srcdir@ + top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ + top_builddir = .. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c + INSTALL_HEADER = $(INSTALL_DATA) + transform = $(program_transform_name) + NORMAL_INSTALL = : + PRE_INSTALL = : + POST_INSTALL = : + NORMAL_UNINSTALL = : + PRE_UNINSTALL = : + POST_UNINSTALL = : + build_triplet = @build@ + host_triplet = @host@ + subdir = fontconfig + DIST_COMMON = $(fontconfiginclude_HEADERS) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/configure.in + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(install_sh) -d + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = + depcomp = + am__depfiles_maybe = + SOURCES = + DIST_SOURCES = + am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; + am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; + am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; + am__installdirs = "$(DESTDIR)$(fontconfigincludedir)" + fontconfigincludeHEADERS_INSTALL = $(INSTALL_HEADER) + HEADERS = $(fontconfiginclude_HEADERS) + ETAGS = etags + CTAGS = ctags + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + AMDEP_FALSE = @AMDEP_FALSE@ + AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AUTOCONF = @AUTOCONF@ + AUTOHEADER = @AUTOHEADER@ + AUTOMAKE = @AUTOMAKE@ + AWK = @AWK@ + CC = @CC@ + CCDEPMODE = @CCDEPMODE@ + CFLAGS = @CFLAGS@ + CONFDIR = @CONFDIR@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DEFS = @DEFS@ + DEPDIR = @DEPDIR@ + DOCDIR = @DOCDIR@ + ECHO = @ECHO@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ + ENABLE_DOCS_FALSE = @ENABLE_DOCS_FALSE@ + ENABLE_DOCS_TRUE = @ENABLE_DOCS_TRUE@ + EXEEXT = @EXEEXT@ + EXPAT_CFLAGS = @EXPAT_CFLAGS@ + EXPAT_LIBS = @EXPAT_LIBS@ + FC_ADD_FONTS = @FC_ADD_FONTS@ + FC_DEFAULT_FONTS = @FC_DEFAULT_FONTS@ + FC_FONTDATE = @FC_FONTDATE@ + FC_FONTPATH = @FC_FONTPATH@ + FREETYPE_CFLAGS = @FREETYPE_CFLAGS@ + FREETYPE_LIBS = @FREETYPE_LIBS@ + HASDOCBOOK = @HASDOCBOOK@ + HAVE_EXPAT = @HAVE_EXPAT@ + HAVE_XMLPARSE_H = @HAVE_XMLPARSE_H@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + LDFLAGS = @LDFLAGS@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + LT_CURRENT = @LT_CURRENT@ + LT_CURRENT_MINUS_AGE = @LT_CURRENT_MINUS_AGE@ + LT_REVISION = @LT_REVISION@ + LT_VERSION_INFO = @LT_VERSION_INFO@ + MAKEINFO = @MAKEINFO@ + MS_LIB_AVAILABLE_FALSE = @MS_LIB_AVAILABLE_FALSE@ + MS_LIB_AVAILABLE_TRUE = @MS_LIB_AVAILABLE_TRUE@ + OBJEXT = @OBJEXT@ + ORTH_FILES = @ORTH_FILES@ + OS_WIN32_FALSE = @OS_WIN32_FALSE@ + OS_WIN32_TRUE = @OS_WIN32_TRUE@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + RANLIB = @RANLIB@ + SET_MAKE = @SET_MAKE@ + SHELL = @SHELL@ + STRIP = @STRIP@ + VERSION = @VERSION@ + ac_ct_CC = @ac_ct_CC@ + ac_ct_RANLIB = @ac_ct_RANLIB@ + ac_ct_STRIP = @ac_ct_STRIP@ + am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ + am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ + am__tar = @am__tar@ + am__untar = @am__untar@ + bindir = @bindir@ + build = @build@ + build_alias = @build_alias@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ + confdir = @confdir@ + datadir = @datadir@ + exec_prefix = @exec_prefix@ + ft_config = @ft_config@ + host = @host@ + host_alias = @host_alias@ + host_cpu = @host_cpu@ + host_os = @host_os@ + host_vendor = @host_vendor@ + includedir = @includedir@ + infodir = @infodir@ + install_sh = @install_sh@ + libdir = @libdir@ + libexecdir = @libexecdir@ + localstatedir = @localstatedir@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + ms_librarian = @ms_librarian@ + oldincludedir = @oldincludedir@ + prefix = @prefix@ + program_transform_name = @program_transform_name@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ + fontconfigincludedir = $(includedir)/fontconfig + fontconfig_headers = \ + fontconfig.h \ + fcfreetype.h \ + fcprivate.h + + fontconfiginclude_HEADERS = $(fontconfig_headers) + all: all-am + + .SUFFIXES: + $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu --ignore-deps fontconfig/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu --ignore-deps fontconfig/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + + $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + + $(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + + mostlyclean-libtool: + -rm -f *.lo + + clean-libtool: + -rm -rf .libs _libs + + distclean-libtool: + -rm -f libtool + uninstall-info-am: + install-fontconfigincludeHEADERS: $(fontconfiginclude_HEADERS) + @$(NORMAL_INSTALL) + test -z "$(fontconfigincludedir)" || $(mkdir_p) "$(DESTDIR)$(fontconfigincludedir)" + @list='$(fontconfiginclude_HEADERS)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ + echo " $(fontconfigincludeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(fontconfigincludedir)/$$f'"; \ + $(fontconfigincludeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(fontconfigincludedir)/$$f"; \ + done + + uninstall-fontconfigincludeHEADERS: + @$(NORMAL_UNINSTALL) + @list='$(fontconfiginclude_HEADERS)'; for p in $$list; do \ + f=$(am__strip_dir) \ + echo " rm -f '$(DESTDIR)$(fontconfigincludedir)/$$f'"; \ + rm -f "$(DESTDIR)$(fontconfigincludedir)/$$f"; \ + done + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + mkid -fID $$unique + tags: TAGS + + TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi + ctags: CTAGS + CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ + list='$(DISTFILES)'; for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ + esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkdir_p) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + check-am: all-am + check: check-am + all-am: Makefile $(HEADERS) + installdirs: + for dir in "$(DESTDIR)$(fontconfigincludedir)"; do \ + test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: install-am + install-exec: install-exec-am + install-data: install-data-am + uninstall: uninstall-am + + install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + + installcheck: installcheck-am + install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + mostlyclean-generic: + + clean-generic: + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + clean: clean-am + + clean-am: clean-generic clean-libtool mostlyclean-am + + distclean: distclean-am + -rm -f Makefile + distclean-am: clean-am distclean-generic distclean-libtool \ + distclean-tags + + dvi: dvi-am + + dvi-am: + + html: html-am + + info: info-am + + info-am: + + install-data-am: install-fontconfigincludeHEADERS + + install-exec-am: + + install-info: install-info-am + + install-man: + + installcheck-am: + + maintainer-clean: maintainer-clean-am + -rm -f Makefile + maintainer-clean-am: distclean-am maintainer-clean-generic + + mostlyclean: mostlyclean-am + + mostlyclean-am: mostlyclean-generic mostlyclean-libtool + + pdf: pdf-am + + pdf-am: + + ps: ps-am + + ps-am: + + uninstall-am: uninstall-fontconfigincludeHEADERS uninstall-info-am + + .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ + clean-libtool ctags distclean distclean-generic \ + distclean-libtool distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-exec install-exec-am \ + install-fontconfigincludeHEADERS install-info install-info-am \ + install-man install-strip installcheck installcheck-am \ + installdirs maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ + ps ps-am tags uninstall uninstall-am \ + uninstall-fontconfigincludeHEADERS uninstall-info-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: diff -crN ./OTHERS/fontconfig/install-sh /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/install-sh *** ./OTHERS/fontconfig/install-sh Thu Jan 1 01:00:00 1970 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/install-sh Tue Nov 15 17:05:50 2005 *************** *** 0 **** --- 1,251 ---- + #!/bin/sh + # + # install - install a program, script, or datafile + # This comes from X11R5 (mit/util/scripts/install.sh). + # + # Copyright 1991 by the Massachusetts Institute of Technology + # + # Permission to use, copy, modify, distribute, and sell this software and its + # documentation for any purpose is hereby granted without fee, provided that + # the above copyright notice appear in all copies and that both that + # copyright notice and this permission notice appear in supporting + # documentation, and that the name of M.I.T. not be used in advertising or + # publicity pertaining to distribution of the software without specific, + # written prior permission. M.I.T. makes no representations about the + # suitability of this software for any purpose. It is provided "as is" + # without express or implied warranty. + # + # Calling this script install-sh is preferred over install.sh, to prevent + # `make' implicit rules from creating a file called install from it + # when there is no Makefile. + # + # This script is compatible with the BSD install script, but was written + # from scratch. It can only install one file at a time, a restriction + # shared with many OS's install programs. + + + # set DOITPROG to echo to test this script + + # Don't use :- since 4.3BSD and earlier shells don't like it. + doit="${DOITPROG-}" + + + # put in absolute paths if you don't have them in your path; or use env. vars. + + mvprog="${MVPROG-mv}" + cpprog="${CPPROG-cp}" + chmodprog="${CHMODPROG-chmod}" + chownprog="${CHOWNPROG-chown}" + chgrpprog="${CHGRPPROG-chgrp}" + stripprog="${STRIPPROG-strip}" + rmprog="${RMPROG-rm}" + mkdirprog="${MKDIRPROG-mkdir}" + + transformbasename="" + transform_arg="" + instcmd="$mvprog" + chmodcmd="$chmodprog 0755" + chowncmd="" + chgrpcmd="" + stripcmd="" + rmcmd="$rmprog -f" + mvcmd="$mvprog" + src="" + dst="" + dir_arg="" + + while [ x"$1" != x ]; do + case $1 in + -c) instcmd="$cpprog" + shift + continue;; + + -d) dir_arg=true + shift + continue;; + + -m) chmodcmd="$chmodprog $2" + shift + shift + continue;; + + -o) chowncmd="$chownprog $2" + shift + shift + continue;; + + -g) chgrpcmd="$chgrpprog $2" + shift + shift + continue;; + + -s) stripcmd="$stripprog" + shift + continue;; + + -t=*) transformarg=`echo $1 | sed 's/-t=//'` + shift + continue;; + + -b=*) transformbasename=`echo $1 | sed 's/-b=//'` + shift + continue;; + + *) if [ x"$src" = x ] + then + src=$1 + else + # this colon is to work around a 386BSD /bin/sh bug + : + dst=$1 + fi + shift + continue;; + esac + done + + if [ x"$src" = x ] + then + echo "install: no input file specified" + exit 1 + else + true + fi + + if [ x"$dir_arg" != x ]; then + dst=$src + src="" + + if [ -d $dst ]; then + instcmd=: + chmodcmd="" + else + instcmd=mkdir + fi + else + + # Waiting for this to be detected by the "$instcmd $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + + if [ -f $src -o -d $src ] + then + true + else + echo "install: $src does not exist" + exit 1 + fi + + if [ x"$dst" = x ] + then + echo "install: no destination specified" + exit 1 + else + true + fi + + # If destination is a directory, append the input filename; if your system + # does not like double slashes in filenames, you may need to add some logic + + if [ -d $dst ] + then + dst="$dst"/`basename $src` + else + true + fi + fi + + ## this sed command emulates the dirname command + dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` + + # Make sure that the destination directory exists. + # this part is taken from Noah Friedman's mkinstalldirs script + + # Skip lots of stat calls in the usual case. + if [ ! -d "$dstdir" ]; then + defaultIFS=' + ' + IFS="${IFS-${defaultIFS}}" + + oIFS="${IFS}" + # Some sh's can't handle IFS=/ for some reason. + IFS='%' + set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` + IFS="${oIFS}" + + pathcomp='' + + while [ $# -ne 0 ] ; do + pathcomp="${pathcomp}${1}" + shift + + if [ ! -d "${pathcomp}" ] ; + then + $mkdirprog "${pathcomp}" + else + true + fi + + pathcomp="${pathcomp}/" + done + fi + + if [ x"$dir_arg" != x ] + then + $doit $instcmd $dst && + + if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst || true; else true ; fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi + else + + # If we're going to rename the final executable, determine the name now. + + if [ x"$transformarg" = x ] + then + dstfile=`basename $dst` + else + dstfile=`basename $dst $transformbasename | + sed $transformarg`$transformbasename + fi + + # don't allow the sed command to completely eliminate the filename + + if [ x"$dstfile" = x ] + then + dstfile=`basename $dst` + else + true + fi + + # Make a temp file name in the proper directory. + + dsttmp=$dstdir/#inst.$$# + + # Move or copy the file name to the temp name + + $doit $instcmd $src $dsttmp && + + trap "rm -f ${dsttmp}" 0 && + + # and set any options; do chmod last to preserve setuid bits + + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $instcmd $src $dsttmp" command. + + if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp || true; else true;fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && + + # Now rename the file to the real destination. + + $doit $rmcmd -f $dstdir/$dstfile && + $doit $mvcmd $dsttmp $dstdir/$dstfile + + fi && + + + exit 0 diff -crN ./OTHERS/fontconfig/ltmain.sh /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/ltmain.sh *** ./OTHERS/fontconfig/ltmain.sh Thu Jan 1 01:00:00 1970 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/ltmain.sh Tue Nov 15 17:05:07 2005 *************** *** 0 **** --- 1,5002 ---- + # ltmain.sh - Provide generalized library-building support services. + # NOTE: Changing this file will not affect anything until you rerun configure. + # + # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 + # Free Software Foundation, Inc. + # Originally by Gordon Matzigkeit , 1996 + # + # This program is free software; you can redistribute it and/or modify + # it under the terms of the GNU General Public License as published by + # the Free Software Foundation; either version 2 of the License, or + # (at your option) any later version. + # + # This program is distributed in the hope that it will be useful, but + # WITHOUT ANY WARRANTY; without even the implied warranty of + # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + # General Public License for more details. + # + # You should have received a copy of the GNU General Public License + # along with this program; if not, write to the Free Software + # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + # + # As a special exception to the GNU General Public License, if you + # distribute this file as part of a program that contains a + # configuration script generated by Autoconf, you may include it under + # the same distribution terms that you use for the rest of that program. + + # Check that we have a working $echo. + if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift + elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : + elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then + # Yippee, $echo works! + : + else + # Restart under the correct shell, and then maybe $echo will work. + exec $SHELL "$0" --no-reexec ${1+"$@"} + fi + + if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat <&2 + echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit 1 + fi + + # Global variables. + mode=$default_mode + nonopt= + prev= + prevopt= + run= + show="$echo" + show_help= + execute_dlfiles= + lo2o="s/\\.lo\$/.${objext}/" + o2lo="s/\\.${objext}\$/.lo/" + + # Parse our command line options once, thoroughly. + while test $# -gt 0 + do + arg="$1" + shift + + case $arg in + -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; + *) optarg= ;; + esac + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + execute_dlfiles) + execute_dlfiles="$execute_dlfiles $arg" + ;; + *) + eval "$prev=\$arg" + ;; + esac + + prev= + prevopt= + continue + fi + + # Have we seen a non-optional argument yet? + case $arg in + --help) + show_help=yes + ;; + + --version) + echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" + exit 0 + ;; + + --config) + sed -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0 + exit 0 + ;; + + --debug) + echo "$progname: enabling shell trace mode" + set -x + ;; + + --dry-run | -n) + run=: + ;; + + --features) + echo "host: $host" + if test "$build_libtool_libs" = yes; then + echo "enable shared libraries" + else + echo "disable shared libraries" + fi + if test "$build_old_libs" = yes; then + echo "enable static libraries" + else + echo "disable static libraries" + fi + exit 0 + ;; + + --finish) mode="finish" ;; + + --mode) prevopt="--mode" prev=mode ;; + --mode=*) mode="$optarg" ;; + + --quiet | --silent) + show=: + ;; + + -dlopen) + prevopt="-dlopen" + prev=execute_dlfiles + ;; + + -*) + $echo "$modename: unrecognized option \`$arg'" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; + + *) + nonopt="$arg" + break + ;; + esac + done + + if test -n "$prevopt"; then + $echo "$modename: option \`$prevopt' requires an argument" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + # If this variable is set in any of the actions, the command in it + # will be execed at the end. This prevents here-documents from being + # left over by shells. + exec_cmd= + + if test -z "$show_help"; then + + # Infer the operation mode. + if test -z "$mode"; then + case $nonopt in + *cc | *++ | gcc* | *-gcc*) + mode=link + for arg + do + case $arg in + -c) + mode=compile + break + ;; + esac + done + ;; + *db | *dbx | *strace | *truss) + mode=execute + ;; + *install*|cp|mv) + mode=install + ;; + *rm) + mode=uninstall + ;; + *) + # If we have no mode, but dlfiles were specified, then do execute mode. + test -n "$execute_dlfiles" && mode=execute + + # Just use the default operation mode. + if test -z "$mode"; then + if test -n "$nonopt"; then + $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 + else + $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 + fi + fi + ;; + esac + fi + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$execute_dlfiles" && test "$mode" != execute; then + $echo "$modename: unrecognized option \`-dlopen'" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + # Change the help message to a mode-specific one. + generic_help="$help" + help="Try \`$modename --help --mode=$mode' for more information." + + # These modes are in order of execution frequency so that they run quickly. + case $mode in + # libtool compile mode + compile) + modename="$modename: compile" + # Get the compilation command and the source file. + base_compile= + prev= + lastarg= + srcfile="$nonopt" + suppress_output= + + user_target=no + for arg + do + case $prev in + "") ;; + xcompiler) + # Aesthetically quote the previous argument. + prev= + lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + + case $arg in + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + + # Add the previous argument to base_compile. + if test -z "$base_compile"; then + base_compile="$lastarg" + else + base_compile="$base_compile $lastarg" + fi + continue + ;; + esac + + # Accept any command-line options. + case $arg in + -o) + if test "$user_target" != "no"; then + $echo "$modename: you cannot specify \`-o' more than once" 1>&2 + exit 1 + fi + user_target=next + ;; + + -static) + build_old_libs=yes + continue + ;; + + -prefer-pic) + pic_mode=yes + continue + ;; + + -prefer-non-pic) + pic_mode=no + continue + ;; + + -Xcompiler) + prev=xcompiler + continue + ;; + + -Wc,*) + args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` + lastarg= + save_ifs="$IFS"; IFS=',' + for arg in $args; do + IFS="$save_ifs" + + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + lastarg="$lastarg $arg" + done + IFS="$save_ifs" + lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` + + # Add the arguments to base_compile. + if test -z "$base_compile"; then + base_compile="$lastarg" + else + base_compile="$base_compile $lastarg" + fi + continue + ;; + esac + + case $user_target in + next) + # The next one is the -o target name + user_target=yes + continue + ;; + yes) + # We got the output file + user_target=set + libobj="$arg" + continue + ;; + esac + + # Accept the current argument as the source file. + lastarg="$srcfile" + srcfile="$arg" + + # Aesthetically quote the previous argument. + + # Backslashify any backslashes, double quotes, and dollar signs. + # These are the only characters that are still specially + # interpreted inside of double-quoted scrings. + lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` + + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + case $lastarg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + lastarg="\"$lastarg\"" + ;; + esac + + # Add the previous argument to base_compile. + if test -z "$base_compile"; then + base_compile="$lastarg" + else + base_compile="$base_compile $lastarg" + fi + done + + case $user_target in + set) + ;; + no) + # Get the name of the library object. + libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` + ;; + *) + $echo "$modename: you must specify a target with \`-o'" 1>&2 + exit 1 + ;; + esac + + # Recognize several different file suffixes. + # If the user specifies -o file.o, it is replaced with file.lo + xform='[cCFSfmso]' + case $libobj in + *.ada) xform=ada ;; + *.adb) xform=adb ;; + *.ads) xform=ads ;; + *.asm) xform=asm ;; + *.c++) xform=c++ ;; + *.cc) xform=cc ;; + *.cpp) xform=cpp ;; + *.cxx) xform=cxx ;; + *.f90) xform=f90 ;; + *.for) xform=for ;; + esac + + libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` + + case $libobj in + *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; + *) + $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 + exit 1 + ;; + esac + + if test -z "$base_compile"; then + $echo "$modename: you must specify a compilation command" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + # Delete any leftover library objects. + if test "$build_old_libs" = yes; then + removelist="$obj $libobj" + else + removelist="$libobj" + fi + + $run $rm $removelist + trap "$run $rm $removelist; exit 1" 1 2 15 + + # On Cygwin there's no "real" PIC flag so we must build both object types + case $host_os in + cygwin* | mingw* | pw32* | os2*) + pic_mode=default + ;; + esac + if test $pic_mode = no && test "$deplibs_check_method" != pass_all; then + # non-PIC code in shared libraries is not supported + pic_mode=default + fi + + # Calculate the filename of the output object if compiler does + # not support -o with -c + if test "$compiler_c_o" = no; then + output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} + lockfile="$output_obj.lock" + removelist="$removelist $output_obj $lockfile" + trap "$run $rm $removelist; exit 1" 1 2 15 + else + need_locks=no + lockfile= + fi + + # Lock this critical section if it is needed + # We use this script file to make the link, it avoids creating a new file + if test "$need_locks" = yes; then + until $run ln "$0" "$lockfile" 2>/dev/null; do + $show "Waiting for $lockfile to be removed" + sleep 2 + done + elif test "$need_locks" = warn; then + if test -f "$lockfile"; then + echo "\ + *** ERROR, $lockfile exists and contains: + `cat $lockfile 2>/dev/null` + + This indicates that another process is trying to use the same + temporary object file, and libtool could not work around it because + your compiler does not support \`-c' and \`-o' together. If you + repeat this compilation, it may succeed, by chance, but you had better + avoid parallel builds (make -j) in this platform, or get a better + compiler." + + $run $rm $removelist + exit 1 + fi + echo $srcfile > "$lockfile" + fi + + if test -n "$fix_srcfile_path"; then + eval srcfile=\"$fix_srcfile_path\" + fi + + # Only build a PIC object if we are building libtool libraries. + if test "$build_libtool_libs" = yes; then + # Without this assignment, base_compile gets emptied. + fbsd_hideous_sh_bug=$base_compile + + if test "$pic_mode" != no; then + # All platforms use -DPIC, to notify preprocessed assembler code. + command="$base_compile $srcfile $pic_flag -DPIC" + else + # Don't build PIC code + command="$base_compile $srcfile" + fi + if test "$build_old_libs" = yes; then + lo_libobj="$libobj" + dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` + if test "X$dir" = "X$libobj"; then + dir="$objdir" + else + dir="$dir/$objdir" + fi + libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` + + if test -d "$dir"; then + $show "$rm $libobj" + $run $rm $libobj + else + $show "$mkdir $dir" + $run $mkdir $dir + status=$? + if test $status -ne 0 && test ! -d $dir; then + exit $status + fi + fi + fi + if test "$compiler_o_lo" = yes; then + output_obj="$libobj" + command="$command -o $output_obj" + elif test "$compiler_c_o" = yes; then + output_obj="$obj" + command="$command -o $output_obj" + fi + + $run $rm "$output_obj" + $show "$command" + if $run eval "$command"; then : + else + test -n "$output_obj" && $run $rm $removelist + exit 1 + fi + + if test "$need_locks" = warn && + test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then + echo "\ + *** ERROR, $lockfile contains: + `cat $lockfile 2>/dev/null` + + but it should contain: + $srcfile + + This indicates that another process is trying to use the same + temporary object file, and libtool could not work around it because + your compiler does not support \`-c' and \`-o' together. If you + repeat this compilation, it may succeed, by chance, but you had better + avoid parallel builds (make -j) in this platform, or get a better + compiler." + + $run $rm $removelist + exit 1 + fi + + # Just move the object if needed, then go on to compile the next one + if test x"$output_obj" != x"$libobj"; then + $show "$mv $output_obj $libobj" + if $run $mv $output_obj $libobj; then : + else + error=$? + $run $rm $removelist + exit $error + fi + fi + + # If we have no pic_flag, then copy the object into place and finish. + if (test -z "$pic_flag" || test "$pic_mode" != default) && + test "$build_old_libs" = yes; then + # Rename the .lo from within objdir to obj + if test -f $obj; then + $show $rm $obj + $run $rm $obj + fi + + $show "$mv $libobj $obj" + if $run $mv $libobj $obj; then : + else + error=$? + $run $rm $removelist + exit $error + fi + + xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$obj"; then + xdir="." + else + xdir="$xdir" + fi + baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"` + libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"` + # Now arrange that obj and lo_libobj become the same file + $show "(cd $xdir && $LN_S $baseobj $libobj)" + if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then + # Unlock the critical section if it was locked + if test "$need_locks" != no; then + $run $rm "$lockfile" + fi + exit 0 + else + error=$? + $run $rm $removelist + exit $error + fi + fi + + # Allow error messages only from the first compilation. + suppress_output=' >/dev/null 2>&1' + fi + + # Only build a position-dependent object if we build old libraries. + if test "$build_old_libs" = yes; then + if test "$pic_mode" != yes; then + # Don't build PIC code + command="$base_compile $srcfile" + else + # All platforms use -DPIC, to notify preprocessed assembler code. + command="$base_compile $srcfile $pic_flag -DPIC" + fi + if test "$compiler_c_o" = yes; then + command="$command -o $obj" + output_obj="$obj" + fi + + # Suppress compiler output if we already did a PIC compilation. + command="$command$suppress_output" + $run $rm "$output_obj" + $show "$command" + if $run eval "$command"; then : + else + $run $rm $removelist + exit 1 + fi + + if test "$need_locks" = warn && + test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then + echo "\ + *** ERROR, $lockfile contains: + `cat $lockfile 2>/dev/null` + + but it should contain: + $srcfile + + This indicates that another process is trying to use the same + temporary object file, and libtool could not work around it because + your compiler does not support \`-c' and \`-o' together. If you + repeat this compilation, it may succeed, by chance, but you had better + avoid parallel builds (make -j) in this platform, or get a better + compiler." + + $run $rm $removelist + exit 1 + fi + + # Just move the object if needed + if test x"$output_obj" != x"$obj"; then + $show "$mv $output_obj $obj" + if $run $mv $output_obj $obj; then : + else + error=$? + $run $rm $removelist + exit $error + fi + fi + + # Create an invalid libtool object if no PIC, so that we do not + # accidentally link it into a program. + if test "$build_libtool_libs" != yes; then + $show "echo timestamp > $libobj" + $run eval "echo timestamp > \$libobj" || exit $? + else + # Move the .lo from within objdir + $show "$mv $libobj $lo_libobj" + if $run $mv $libobj $lo_libobj; then : + else + error=$? + $run $rm $removelist + exit $error + fi + fi + fi + + # Unlock the critical section if it was locked + if test "$need_locks" != no; then + $run $rm "$lockfile" + fi + + exit 0 + ;; + + # libtool link mode + link | relink) + modename="$modename: link" + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + # It is impossible to link a dll without this setting, and + # we shouldn't force the makefile maintainer to figure out + # which system we are compiling for in order to pass an extra + # flag for every libtool invokation. + # allow_undefined=no + + # FIXME: Unfortunately, there are problems with the above when trying + # to make a dll which has undefined symbols, in which case not + # even a static library is built. For now, we need to specify + # -no-undefined on the libtool link line when we can be certain + # that all symbols are satisfied, otherwise we get a static library. + allow_undefined=yes + ;; + *) + allow_undefined=yes + ;; + esac + libtool_args="$nonopt" + compile_command="$nonopt" + finalize_command="$nonopt" + + compile_rpath= + finalize_rpath= + compile_shlibpath= + finalize_shlibpath= + convenience= + old_convenience= + deplibs= + old_deplibs= + compiler_flags= + linker_flags= + dllsearchpath= + lib_search_path=`pwd` + + avoid_version=no + dlfiles= + dlprefiles= + dlself=no + export_dynamic=no + export_symbols= + export_symbols_regex= + generated= + libobjs= + ltlibs= + module=no + no_install=no + objs= + prefer_static_libs=no + preload=no + prev= + prevarg= + release= + rpath= + xrpath= + perm_rpath= + temp_rpath= + thread_safe=no + vinfo= + + # We need to know -static, to get the right output filenames. + for arg + do + case $arg in + -all-static | -static) + if test "X$arg" = "X-all-static"; then + if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then + $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2 + fi + if test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + else + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + fi + build_libtool_libs=no + build_old_libs=yes + prefer_static_libs=yes + break + ;; + esac + done + + # See if our shared archives depend on static archives. + test -n "$old_archive_from_new_cmds" && build_old_libs=yes + + # Go through the arguments, transforming them on the way. + while test $# -gt 0; do + arg="$1" + shift + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test + ;; + *) qarg=$arg ;; + esac + libtool_args="$libtool_args $qarg" + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + output) + compile_command="$compile_command @OUTPUT@" + finalize_command="$finalize_command @OUTPUT@" + ;; + esac + + case $prev in + dlfiles|dlprefiles) + if test "$preload" = no; then + # Add the symbol object into the linking commands. + compile_command="$compile_command @SYMFILE@" + finalize_command="$finalize_command @SYMFILE@" + preload=yes + fi + case $arg in + *.la | *.lo) ;; # We handle these cases below. + force) + if test "$dlself" = no; then + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + self) + if test "$prev" = dlprefiles; then + dlself=yes + elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then + dlself=yes + else + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + *) + if test "$prev" = dlfiles; then + dlfiles="$dlfiles $arg" + else + dlprefiles="$dlprefiles $arg" + fi + prev= + continue + ;; + esac + ;; + expsyms) + export_symbols="$arg" + if test ! -f "$arg"; then + $echo "$modename: symbol file \`$arg' does not exist" + exit 1 + fi + prev= + continue + ;; + expsyms_regex) + export_symbols_regex="$arg" + prev= + continue + ;; + release) + release="-$arg" + prev= + continue + ;; + rpath | xrpath) + # We need an absolute path. + case $arg in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + $echo "$modename: only absolute run-paths are allowed" 1>&2 + exit 1 + ;; + esac + if test "$prev" = rpath; then + case "$rpath " in + *" $arg "*) ;; + *) rpath="$rpath $arg" ;; + esac + else + case "$xrpath " in + *" $arg "*) ;; + *) xrpath="$xrpath $arg" ;; + esac + fi + prev= + continue + ;; + xcompiler) + compiler_flags="$compiler_flags $qarg" + prev= + compile_command="$compile_command $qarg" + finalize_command="$finalize_command $qarg" + continue + ;; + xlinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $wl$qarg" + prev= + compile_command="$compile_command $wl$qarg" + finalize_command="$finalize_command $wl$qarg" + continue + ;; + *) + eval "$prev=\"\$arg\"" + prev= + continue + ;; + esac + fi # test -n $prev + + prevarg="$arg" + + case $arg in + -all-static) + if test -n "$link_static_flag"; then + compile_command="$compile_command $link_static_flag" + finalize_command="$finalize_command $link_static_flag" + fi + continue + ;; + + -allow-undefined) + # FIXME: remove this flag sometime in the future. + $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 + continue + ;; + + -avoid-version) + avoid_version=yes + continue + ;; + + -dlopen) + prev=dlfiles + continue + ;; + + -dlpreopen) + prev=dlprefiles + continue + ;; + + -export-dynamic) + export_dynamic=yes + case $host in + *aix*) + # add the -bexpall linker option + export_dynamic_flag_spec='-bexpall' + ;; + *) + ;; + esac + continue + ;; + + -export-symbols | -export-symbols-regex) + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + $echo "$modename: more than one -exported-symbols argument is not allowed" + exit 1 + fi + if test "X$arg" = "X-export-symbols"; then + prev=expsyms + else + prev=expsyms_regex + fi + continue + ;; + + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* + # so, if we see these flags be careful not to treat them like -L + -L[A-Z][A-Z]*:*) + case $with_gcc/$host in + no/*-*-irix*) + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + ;; + esac + continue + ;; + + -L*) + dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 + exit 1 + fi + dir="$absdir" + ;; + esac + case "$deplibs " in + *" -L$dir "*) ;; + *) + deplibs="$deplibs -L$dir" + lib_search_path="$lib_search_path $dir" + ;; + esac + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + case :$dllsearchpath: in + *":$dir:"*) ;; + *) dllsearchpath="$dllsearchpath:$dir";; + esac + ;; + esac + continue + ;; + + -l*) + if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then + case $host in + *-*-cygwin* | *-*-pw32* | *-*-beos*) + # These systems don't actually have a C or math library (as such) + continue + ;; + *-*-mingw* | *-*-os2*) + # These systems don't actually have a C library (as such) + test "X$arg" = "X-lc" && continue + ;; + *-*-openbsd*) + # Do not include libc due to us having libc/libc_r. + test "X$arg" = "X-lc" && continue + ;; + esac + elif test "X$arg" = "X-lc_r"; then + case $host in + *-*-openbsd*) + # Do not include libc_r directly, use -pthread flag. + continue + ;; + esac + fi + deplibs="$deplibs $arg" + continue + ;; + + -module) + module=yes + continue + ;; + + -no-fast-install) + fast_install=no + continue + ;; + + -no-install) + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + # The PATH hackery in wrapper scripts is required on Windows + # in order for the loader to find any dlls it needs. + $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 + $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 + fast_install=no + ;; + *) no_install=yes ;; + esac + continue + ;; + + -no-undefined) + allow_undefined=no + continue + ;; + + -o) prev=output ;; + + -release) + prev=release + continue + ;; + + -rpath) + prev=rpath + continue + ;; + + -R) + prev=xrpath + continue + ;; + + -R*) + dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + $echo "$modename: only absolute run-paths are allowed" 1>&2 + exit 1 + ;; + esac + case "$xrpath " in + *" $dir "*) ;; + *) xrpath="$xrpath $dir" ;; + esac + continue + ;; + + -static) + # The effects of -static are defined in a previous loop. + # We used to do the same as -all-static on platforms that + # didn't have a PIC flag, but the assumption that the effects + # would be equivalent was wrong. It would break on at least + # Digital Unix and AIX. + continue + ;; + + -thread-safe) + thread_safe=yes + continue + ;; + + -version-info) + prev=vinfo + continue + ;; + + -Wc,*) + args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + case $flag in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + flag="\"$flag\"" + ;; + esac + arg="$arg $wl$flag" + compiler_flags="$compiler_flags $flag" + done + IFS="$save_ifs" + arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + ;; + + -Wl,*) + args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + case $flag in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + flag="\"$flag\"" + ;; + esac + arg="$arg $wl$flag" + compiler_flags="$compiler_flags $wl$flag" + linker_flags="$linker_flags $flag" + done + IFS="$save_ifs" + arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + ;; + + -Xcompiler) + prev=xcompiler + continue + ;; + + -Xlinker) + prev=xlinker + continue + ;; + + # Some other compiler flag. + -* | +*) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + ;; + + *.lo | *.$objext) + # A library or standard object. + if test "$prev" = dlfiles; then + # This file was specified with -dlopen. + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $arg" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"` + prev= + else + case $arg in + *.lo) libobjs="$libobjs $arg" ;; + *) objs="$objs $arg" ;; + esac + fi + ;; + + *.$libext) + # An archive. + deplibs="$deplibs $arg" + old_deplibs="$old_deplibs $arg" + continue + ;; + + *.la) + # A libtool-controlled library. + + if test "$prev" = dlfiles; then + # This library was specified with -dlopen. + dlfiles="$dlfiles $arg" + prev= + elif test "$prev" = dlprefiles; then + # The library was specified with -dlpreopen. + dlprefiles="$dlprefiles $arg" + prev= + else + deplibs="$deplibs $arg" + fi + continue + ;; + + # Some other compiler argument. + *) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + ;; + esac # arg + + # Now actually substitute the argument into the commands. + if test -n "$arg"; then + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + fi + done # argument parsing loop + + if test -n "$prev"; then + $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then + eval arg=\"$export_dynamic_flag_spec\" + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + fi + + # calculate the name of the file, without its directory + outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` + libobjs_save="$libobjs" + + if test -n "$shlibpath_var"; then + # get the directories listed in $shlibpath_var + eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` + else + shlib_search_path= + fi + eval sys_lib_search_path=\"$sys_lib_search_path_spec\" + eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + + output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` + if test "X$output_objdir" = "X$output"; then + output_objdir="$objdir" + else + output_objdir="$output_objdir/$objdir" + fi + # Create the object directory. + if test ! -d $output_objdir; then + $show "$mkdir $output_objdir" + $run $mkdir $output_objdir + status=$? + if test $status -ne 0 && test ! -d $output_objdir; then + exit $status + fi + fi + + # Determine the type of output + case $output in + "") + $echo "$modename: you must specify an output file" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; + *.$libext) linkmode=oldlib ;; + *.lo | *.$objext) linkmode=obj ;; + *.la) linkmode=lib ;; + *) linkmode=prog ;; # Anything else should be a program. + esac + + specialdeplibs= + libs= + # Find all interdependent deplibs by searching for libraries + # that are linked more than once (e.g. -la -lb -la) + for deplib in $deplibs; do + case "$libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + libs="$libs $deplib" + done + deplibs= + newdependency_libs= + newlib_search_path= + need_relink=no # whether we're linking any uninstalled libtool libraries + notinst_deplibs= # not-installed libtool libraries + notinst_path= # paths that contain not-installed libtool libraries + case $linkmode in + lib) + passes="conv link" + for file in $dlfiles $dlprefiles; do + case $file in + *.la) ;; + *) + $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 + exit 1 + ;; + esac + done + ;; + prog) + compile_deplibs= + finalize_deplibs= + alldeplibs=no + newdlfiles= + newdlprefiles= + passes="conv scan dlopen dlpreopen link" + ;; + *) passes="conv" + ;; + esac + for pass in $passes; do + if test $linkmode = prog; then + # Determine which files to process + case $pass in + dlopen) + libs="$dlfiles" + save_deplibs="$deplibs" # Collect dlpreopened libraries + deplibs= + ;; + dlpreopen) libs="$dlprefiles" ;; + link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; + esac + fi + for deplib in $libs; do + lib= + found=no + case $deplib in + -l*) + if test $linkmode = oldlib && test $linkmode = obj; then + $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2 + continue + fi + if test $pass = conv; then + deplibs="$deplib $deplibs" + continue + fi + name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` + for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do + # Search the libtool library + lib="$searchdir/lib${name}.la" + if test -f "$lib"; then + found=yes + break + fi + done + if test "$found" != yes; then + # deplib doesn't seem to be a libtool library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test $linkmode = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + ;; # -l + -L*) + case $linkmode in + lib) + deplibs="$deplib $deplibs" + test $pass = conv && continue + newdependency_libs="$deplib $newdependency_libs" + newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + ;; + prog) + if test $pass = conv; then + deplibs="$deplib $deplibs" + continue + fi + if test $pass = scan; then + deplibs="$deplib $deplibs" + newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + ;; + *) + $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2 + ;; + esac # linkmode + continue + ;; # -L + -R*) + if test $pass = link; then + dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` + # Make sure the xrpath contains only unique directories. + case "$xrpath " in + *" $dir "*) ;; + *) xrpath="$xrpath $dir" ;; + esac + fi + deplibs="$deplib $deplibs" + continue + ;; + *.la) lib="$deplib" ;; + *.$libext) + if test $pass = conv; then + deplibs="$deplib $deplibs" + continue + fi + case $linkmode in + lib) + if test "$deplibs_check_method" != pass_all; then + echo + echo "*** Warning: This library needs some functionality provided by $deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." + else + echo + echo "*** Warning: Linking the shared library $output against the" + echo "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + fi + continue + ;; + prog) + if test $pass != link; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + continue + ;; + esac # linkmode + ;; # *.$libext + *.lo | *.$objext) + if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + newdlprefiles="$newdlprefiles $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + newdlfiles="$newdlfiles $deplib" + fi + continue + ;; + %DEPLIBS%) + alldeplibs=yes + continue + ;; + esac # case $deplib + if test $found = yes || test -f "$lib"; then : + else + $echo "$modename: cannot find the library \`$lib'" 1>&2 + exit 1 + fi + + # Check to see that this really is a libtool archive. + if (sed -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit 1 + fi + + ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` + test "X$ladir" = "X$lib" && ladir="." + + dlname= + dlopen= + dlpreopen= + libdir= + library_names= + old_library= + # If the library was installed with an old release of libtool, + # it will not redefine variable installed. + installed=yes + + # Read the .la file + case $lib in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan" || + { test $linkmode = oldlib && test $linkmode = obj; }; then + # Add dl[pre]opened files of deplib + test -n "$dlopen" && dlfiles="$dlfiles $dlopen" + test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" + fi + + if test $pass = conv; then + # Only check for convenience libraries + deplibs="$lib $deplibs" + if test -z "$libdir"; then + if test -z "$old_library"; then + $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 + exit 1 + fi + # It is a libtool convenience library, so add in its objects. + convenience="$convenience $ladir/$objdir/$old_library" + old_convenience="$old_convenience $ladir/$objdir/$old_library" + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + tmp_libs="$tmp_libs $deplib" + done + elif test $linkmode != prog && test $linkmode != lib; then + $echo "$modename: \`$lib' is not a convenience library" 1>&2 + exit 1 + fi + continue + fi # $pass = conv + + # Get the name of the library we link against. + linklib= + for l in $old_library $library_names; do + linklib="$l" + done + if test -z "$linklib"; then + $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 + exit 1 + fi + + # This library was specified with -dlopen. + if test $pass = dlopen; then + if test -z "$libdir"; then + $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 + exit 1 + fi + if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlname, no dlopen support or we're linking + # statically, we need to preload. + dlprefiles="$dlprefiles $lib" + else + newdlfiles="$newdlfiles $lib" + fi + continue + fi # $pass = dlopen + + # We need an absolute path. + case $ladir in + [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; + *) + abs_ladir=`cd "$ladir" && pwd` + if test -z "$abs_ladir"; then + $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 + $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 + abs_ladir="$ladir" + fi + ;; + esac + laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + + # Find the relevant object directory and library name. + if test "X$installed" = Xyes; then + if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + $echo "$modename: warning: library \`$lib' was moved." 1>&2 + dir="$ladir" + absdir="$abs_ladir" + libdir="$abs_ladir" + else + dir="$libdir" + absdir="$libdir" + fi + else + dir="$ladir/$objdir" + absdir="$abs_ladir/$objdir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + fi # $installed = yes + name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + + # This library was specified with -dlpreopen. + if test $pass = dlpreopen; then + if test -z "$libdir"; then + $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 + exit 1 + fi + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + newdlprefiles="$newdlprefiles $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + newdlprefiles="$newdlprefiles $dir/$dlname" + else + newdlprefiles="$newdlprefiles $dir/$linklib" + fi + fi # $pass = dlpreopen + + if test -z "$libdir"; then + # Link the convenience library + if test $linkmode = lib; then + deplibs="$dir/$old_library $deplibs" + elif test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$dir/$old_library $compile_deplibs" + finalize_deplibs="$dir/$old_library $finalize_deplibs" + else + deplibs="$lib $deplibs" + fi + continue + fi + + if test $linkmode = prog && test $pass != link; then + newlib_search_path="$newlib_search_path $ladir" + deplibs="$lib $deplibs" + + linkalldeplibs=no + if test "$link_all_deplibs" != no || test -z "$library_names" || + test "$build_libtool_libs" = no; then + linkalldeplibs=yes + fi + + tmp_libs= + for deplib in $dependency_libs; do + case $deplib in + -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test + esac + # Need to link against all dependency_libs? + if test $linkalldeplibs = yes; then + deplibs="$deplib $deplibs" + else + # Need to hardcode shared library paths + # or/and link against static libraries + newdependency_libs="$deplib $newdependency_libs" + fi + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + tmp_libs="$tmp_libs $deplib" + done # for deplib + continue + fi # $linkmode = prog... + + link_static=no # Whether the deplib will be linked statically + if test -n "$library_names" && + { test "$prefer_static_libs" = no || test -z "$old_library"; }; then + # Link against this shared library + + if test "$linkmode,$pass" = "prog,link" || + { test $linkmode = lib && test $hardcode_into_libs = yes; }; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + if test $linkmode = prog; then + # We need to hardcode the library path + if test -n "$shlibpath_var"; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath " in + *" $dir "*) ;; + *" $absdir "*) ;; + *) temp_rpath="$temp_rpath $dir" ;; + esac + fi + fi + fi # $linkmode,$pass = prog,link... + + if test "$alldeplibs" = yes && + { test "$deplibs_check_method" = pass_all || + { test "$build_libtool_libs" = yes && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + + if test "$installed" = no; then + notinst_deplibs="$notinst_deplibs $lib" + need_relink=yes + fi + + if test -n "$old_archive_from_expsyms_cmds"; then + # figure out the soname + set dummy $library_names + realname="$2" + shift; shift + libname=`eval \\$echo \"$libname_spec\"` + # use dlname if we got it. it's perfectly good, no? + if test -n "$dlname"; then + soname="$dlname" + elif test -n "$soname_spec"; then + # bleh windows + case $host in + *cygwin*) + major=`expr $current - $age` + versuffix="-$major" + ;; + esac + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + + # Make a new name for the extract_expsyms_cmds to use + soroot="$soname" + soname=`echo $soroot | sed -e 's/^.*\///'` + newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a" + + # If the library has no export list, then create one now + if test -f "$output_objdir/$soname-def"; then : + else + $show "extracting exported symbol list from \`$soname'" + save_ifs="$IFS"; IFS='~' + eval cmds=\"$extract_expsyms_cmds\" + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + + # Create $newlib + if test -f "$output_objdir/$newlib"; then :; else + $show "generating import library for \`$soname'" + save_ifs="$IFS"; IFS='~' + eval cmds=\"$old_archive_from_expsyms_cmds\" + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + # make sure the library variables are pointing to the new library + dir=$output_objdir + linklib=$newlib + fi # test -n $old_archive_from_expsyms_cmds + + if test $linkmode = prog || test "$mode" != relink; then + add_shlibpath= + add_dir= + add= + lib_linked=yes + case $hardcode_action in + immediate | unsupported) + if test "$hardcode_direct" = no; then + add="$dir/$linklib" + elif test "$hardcode_minus_L" = no; then + case $host in + *-*-sunos*) add_shlibpath="$dir" ;; + esac + add_dir="-L$dir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = no; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + relink) + if test "$hardcode_direct" = yes; then + add="$dir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$dir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + *) lib_linked=no ;; + esac + + if test "$lib_linked" != yes; then + $echo "$modename: configuration error: unsupported hardcode properties" + exit 1 + fi + + if test -n "$add_shlibpath"; then + case :$compile_shlibpath: in + *":$add_shlibpath:"*) ;; + *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; + esac + fi + if test $linkmode = prog; then + test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" + test -n "$add" && compile_deplibs="$add $compile_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + if test "$hardcode_direct" != yes && \ + test "$hardcode_minus_L" != yes && \ + test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + fi + fi + fi + + if test $linkmode = prog || test "$mode" = relink; then + add_shlibpath= + add_dir= + add= + # Finalize command for both is simple: just hardcode it. + if test "$hardcode_direct" = yes; then + add="$libdir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$libdir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + add="-l$name" + else + # We cannot seem to hardcode it, guess we'll fake it. + add_dir="-L$libdir" + add="-l$name" + fi + + if test $linkmode = prog; then + test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" + test -n "$add" && finalize_deplibs="$add $finalize_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + fi + fi + elif test $linkmode = prog; then + if test "$alldeplibs" = yes && + { test "$deplibs_check_method" = pass_all || + { test "$build_libtool_libs" = yes && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + + # Try to link the static library + # Here we assume that one of hardcode_direct or hardcode_minus_L + # is not unsupported. This is valid on all known static and + # shared platforms. + if test "$hardcode_direct" != unsupported; then + test -n "$old_library" && linklib="$old_library" + compile_deplibs="$dir/$linklib $compile_deplibs" + finalize_deplibs="$dir/$linklib $finalize_deplibs" + else + compile_deplibs="-l$name -L$dir $compile_deplibs" + finalize_deplibs="-l$name -L$dir $finalize_deplibs" + fi + elif test "$build_libtool_libs" = yes; then + # Not a shared library + if test "$deplibs_check_method" != pass_all; then + # We're trying link a shared library against a static one + # but the system doesn't support it. + + # Just print a warning and add the library to dependency_libs so + # that the program can be linked against the static library. + echo + echo "*** Warning: This library needs some functionality provided by $lib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." + if test "$module" = yes; then + echo "*** Therefore, libtool will create a static module, that should work " + echo "*** as long as the dlopening application is linked with the -dlopen flag." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + else + convenience="$convenience $dir/$old_library" + old_convenience="$old_convenience $dir/$old_library" + deplibs="$dir/$old_library $deplibs" + link_static=yes + fi + fi # link shared/static library? + + if test $linkmode = lib; then + if test -n "$dependency_libs" && + { test $hardcode_into_libs != yes || test $build_old_libs = yes || + test $link_static = yes; }; then + # Extract -R from dependency_libs + temp_deplibs= + for libdir in $dependency_libs; do + case $libdir in + -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` + case " $xrpath " in + *" $temp_xrpath "*) ;; + *) xrpath="$xrpath $temp_xrpath";; + esac;; + *) temp_deplibs="$temp_deplibs $libdir";; + esac + done + dependency_libs="$temp_deplibs" + fi + + newlib_search_path="$newlib_search_path $absdir" + # Link against this library + test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" + # ... and its dependency_libs + tmp_libs= + for deplib in $dependency_libs; do + newdependency_libs="$deplib $newdependency_libs" + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + tmp_libs="$tmp_libs $deplib" + done + + if test $link_all_deplibs != no; then + # Add the search paths of all dependency libraries + for deplib in $dependency_libs; do + case $deplib in + -L*) path="$deplib" ;; + *.la) + dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$deplib" && dir="." + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 + absdir="$dir" + fi + ;; + esac + if grep "^installed=no" $deplib > /dev/null; then + path="-L$absdir/$objdir" + else + eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + if test -z "$libdir"; then + $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 + exit 1 + fi + if test "$absdir" != "$libdir"; then + $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 + fi + path="-L$absdir" + fi + ;; + *) continue ;; + esac + case " $deplibs " in + *" $path "*) ;; + *) deplibs="$deplibs $path" ;; + esac + done + fi # link_all_deplibs != no + fi # linkmode = lib + done # for deplib in $libs + if test $pass = dlpreopen; then + # Link the dlpreopened libraries before other libraries + for deplib in $save_deplibs; do + deplibs="$deplib $deplibs" + done + fi + if test $pass != dlopen; then + test $pass != scan && dependency_libs="$newdependency_libs" + if test $pass != conv; then + # Make sure lib_search_path contains only unique directories. + lib_search_path= + for dir in $newlib_search_path; do + case "$lib_search_path " in + *" $dir "*) ;; + *) lib_search_path="$lib_search_path $dir" ;; + esac + done + newlib_search_path= + fi + + if test "$linkmode,$pass" != "prog,link"; then + vars="deplibs" + else + vars="compile_deplibs finalize_deplibs" + fi + for var in $vars dependency_libs; do + # Add libraries to $var in reverse order + eval tmp_libs=\"\$$var\" + new_libs= + for deplib in $tmp_libs; do + case $deplib in + -L*) new_libs="$deplib $new_libs" ;; + *) + case " $specialdeplibs " in + *" $deplib "*) new_libs="$deplib $new_libs" ;; + *) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$deplib $new_libs" ;; + esac + ;; + esac + ;; + esac + done + tmp_libs= + for deplib in $new_libs; do + case $deplib in + -L*) + case " $tmp_libs " in + *" $deplib "*) ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + done + eval $var=\"$tmp_libs\" + done # for var + fi + if test "$pass" = "conv" && + { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then + libs="$deplibs" # reset libs + deplibs= + fi + done # for pass + if test $linkmode = prog; then + dlfiles="$newdlfiles" + dlprefiles="$newdlprefiles" + fi + + case $linkmode in + oldlib) + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 + fi + + if test -n "$rpath"; then + $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 + fi + + if test -n "$xrpath"; then + $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 + fi + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 + fi + + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 + fi + + # Now set the variables for building old libraries. + build_libtool_libs=no + oldlibs="$output" + objs="$objs$old_deplibs" + ;; + + lib) + # Make sure we only generate libraries of the form `libNAME.la'. + case $outputname in + lib*) + name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + eval libname=\"$libname_spec\" + ;; + *) + if test "$module" = no; then + $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + if test "$need_lib_prefix" != no; then + # Add the "lib" prefix for modules if required + name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` + eval libname=\"$libname_spec\" + else + libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` + fi + ;; + esac + + if test -n "$objs"; then + if test "$deplibs_check_method" != pass_all; then + $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 + exit 1 + else + echo + echo "*** Warning: Linking the shared library $output against the non-libtool" + echo "*** objects $objs is not portable!" + libobjs="$libobjs $objs" + fi + fi + + if test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 + fi + + set dummy $rpath + if test $# -gt 2; then + $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 + fi + install_libdir="$2" + + oldlibs= + if test -z "$rpath"; then + if test "$build_libtool_libs" = yes; then + # Building a libtool convenience library. + libext=al + oldlibs="$output_objdir/$libname.$libext $oldlibs" + build_libtool_libs=convenience + build_old_libs=yes + fi + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 + fi + else + + # Parse the version information argument. + save_ifs="$IFS"; IFS=':' + set dummy $vinfo 0 0 0 + IFS="$save_ifs" + + if test -n "$8"; then + $echo "$modename: too many parameters to \`-version-info'" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + current="$2" + revision="$3" + age="$4" + + # Check that each of the things are valid numbers. + case $current in + 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9]) ;; + *) + $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit 1 + ;; + esac + + case $revision in + 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9]) ;; + *) + $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit 1 + ;; + esac + + case $age in + 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9]) ;; + *) + $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit 1 + ;; + esac + + if test $age -gt $current; then + $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit 1 + fi + + # Calculate the version variables. + major= + versuffix= + verstring= + case $version_type in + none) ;; + + darwin) + # Like Linux, but with the current version available in + # verstring for coding it into the library header + major=.`expr $current - $age` + versuffix="$major.$age.$revision" + # Darwin ld doesn't like 0 for these options... + minor_current=`expr $current + 1` + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + ;; + + freebsd-aout) + major=".$current" + versuffix=".$current.$revision"; + ;; + + freebsd-elf) + major=".$current" + versuffix=".$current"; + ;; + + irix) + major=`expr $current - $age + 1` + verstring="sgi$major.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$revision + while test $loop != 0; do + iface=`expr $revision - $loop` + loop=`expr $loop - 1` + verstring="sgi$major.$iface:$verstring" + done + + # Before this point, $major must not contain `.'. + major=.$major + versuffix="$major.$revision" + ;; + + linux) + major=.`expr $current - $age` + versuffix="$major.$age.$revision" + ;; + + osf) + major=`expr $current - $age` + versuffix=".$current.$age.$revision" + verstring="$current.$age.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$age + while test $loop != 0; do + iface=`expr $current - $loop` + loop=`expr $loop - 1` + verstring="$verstring:${iface}.0" + done + + # Make executables depend on our current version. + verstring="$verstring:${current}.0" + ;; + + sunos) + major=".$current" + versuffix=".$current.$revision" + ;; + + windows) + # Use '-' rather than '.', since we only want one + # extension on DOS 8.3 filesystems. + major=`expr $current - $age` + versuffix="-$major" + ;; + + *) + $echo "$modename: unknown library version type \`$version_type'" 1>&2 + echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit 1 + ;; + esac + + # Clear the version info if we defaulted, and they specified a release. + if test -z "$vinfo" && test -n "$release"; then + major= + verstring="0.0" + case $version_type in + darwin) + # we can't check for "0.0" in archive_cmds due to quoting + # problems, so we reset it completely + verstring="" + ;; + *) + verstring="0.0" + ;; + esac + if test "$need_version" = no; then + versuffix= + else + versuffix=".0.0" + fi + fi + + # Remove version info from name if versioning should be avoided + if test "$avoid_version" = yes && test "$need_version" = no; then + major= + versuffix= + verstring="" + fi + + # Check to see if the archive will have undefined symbols. + if test "$allow_undefined" = yes; then + if test "$allow_undefined_flag" = unsupported; then + $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 + build_libtool_libs=no + build_old_libs=yes + fi + else + # Don't allow undefined symbols. + allow_undefined_flag="$no_undefined_flag" + fi + fi + + if test "$mode" != relink; then + # Remove our outputs. + $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*" + $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.* + fi + + # Now set the variables for building old libraries. + if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then + oldlibs="$oldlibs $output_objdir/$libname.$libext" + + # Transform .lo files to .o files. + oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` + fi + + # Eliminate all temporary directories. + for path in $notinst_path; do + lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'` + deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'` + dependency_libs=`echo "$dependency_libs " | sed -e 's% -L$path % %g'` + done + + if test -n "$xrpath"; then + # If the user specified any rpath flags, then add them. + temp_xrpath= + for libdir in $xrpath; do + temp_xrpath="$temp_xrpath -R$libdir" + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done + if test $hardcode_into_libs != yes || test $build_old_libs = yes; then + dependency_libs="$temp_xrpath $dependency_libs" + fi + fi + + # Make sure dlfiles contains only unique files that won't be dlpreopened + old_dlfiles="$dlfiles" + dlfiles= + for lib in $old_dlfiles; do + case " $dlprefiles $dlfiles " in + *" $lib "*) ;; + *) dlfiles="$dlfiles $lib" ;; + esac + done + + # Make sure dlprefiles contains only unique files + old_dlprefiles="$dlprefiles" + dlprefiles= + for lib in $old_dlprefiles; do + case "$dlprefiles " in + *" $lib "*) ;; + *) dlprefiles="$dlprefiles $lib" ;; + esac + done + + if test "$build_libtool_libs" = yes; then + if test -n "$rpath"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) + # these systems don't actually have a c library (as such)! + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C library is in the System framework + deplibs="$deplibs -framework System" + ;; + *-*-netbsd*) + # Don't link with libc until the a.out ld.so is fixed. + ;; + *-*-openbsd*) + # Do not include libc due to us having libc/libc_r. + ;; + *) + # Add libc to deplibs on all other systems if necessary. + if test $build_libtool_need_lc = "yes"; then + deplibs="$deplibs -lc" + fi + ;; + esac + fi + + # Transform deplibs into only deplibs that can be linked in shared. + name_save=$name + libname_save=$libname + release_save=$release + versuffix_save=$versuffix + major_save=$major + # I'm not sure if I'm treating the release correctly. I think + # release should show up in the -l (ie -lgmp5) so we don't want to + # add it in twice. Is that correct? + release="" + versuffix="" + major="" + newdeplibs= + droppeddeps=no + case $deplibs_check_method in + pass_all) + # Don't check for shared/static. Everything works. + # This might be a little naive. We might want to check + # whether the library exists or not. But this is on + # osf3 & osf4 and I'm not really sure... Just + # implementing what was already the behaviour. + newdeplibs=$deplibs + ;; + test_compile) + # This code stresses the "libraries are programs" paradigm to its + # limits. Maybe even breaks it. We compile a program, linking it + # against the deplibs as a proxy for the library. Then we can check + # whether they linked in statically or dynamically with ldd. + $rm conftest.c + cat > conftest.c </dev/null` + for potent_lib in $potential_libs; do + # Follow soft links. + if ls -lLd "$potent_lib" 2>/dev/null \ + | grep " -> " >/dev/null; then + continue + fi + # The statement above tries to avoid entering an + # endless loop below, in case of cyclic links. + # We might still enter an endless loop, since a link + # loop can be closed while we follow links, + # but so what? + potlib="$potent_lib" + while test -h "$potlib" 2>/dev/null; do + potliblink=`ls -ld $potlib | sed 's/.* -> //'` + case $potliblink in + [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; + *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; + esac + done + if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ + | sed 10q \ + | egrep "$file_magic_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done + done + if test -n "$a_deplib" ; then + droppeddeps=yes + echo + echo "*** Warning: This library needs some functionality provided by $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." + fi + else + # Add a -L argument. + newdeplibs="$newdeplibs $a_deplib" + fi + done # Gone through all deplibs. + ;; + match_pattern*) + set dummy $deplibs_check_method + match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` + for a_deplib in $deplibs; do + name="`expr $a_deplib : '-l\(.*\)'`" + # If $name is empty we are operating on a -L argument. + if test -n "$name" && test "$name" != "0"; then + libname=`eval \\$echo \"$libname_spec\"` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + if eval echo \"$potent_lib\" 2>/dev/null \ + | sed 10q \ + | egrep "$match_pattern_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done + done + if test -n "$a_deplib" ; then + droppeddeps=yes + echo + echo "*** Warning: This library needs some functionality provided by $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." + fi + else + # Add a -L argument. + newdeplibs="$newdeplibs $a_deplib" + fi + done # Gone through all deplibs. + ;; + none | unknown | *) + newdeplibs="" + if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ + -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' | + grep . >/dev/null; then + echo + if test "X$deplibs_check_method" = "Xnone"; then + echo "*** Warning: inter-library dependencies are not supported in this platform." + else + echo "*** Warning: inter-library dependencies are not known to be supported." + fi + echo "*** All declared inter-library dependencies are being dropped." + droppeddeps=yes + fi + ;; + esac + versuffix=$versuffix_save + major=$major_save + release=$release_save + libname=$libname_save + name=$name_save + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` + ;; + esac + + if test "$droppeddeps" = yes; then + if test "$module" = yes; then + echo + echo "*** Warning: libtool could not satisfy all declared inter-library" + echo "*** dependencies of module $libname. Therefore, libtool will create" + echo "*** a static module, that should work as long as the dlopening" + echo "*** application is linked with the -dlopen flag." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + else + echo "*** The inter-library dependencies that have been dropped here will be" + echo "*** automatically added whenever a program is linked with this library" + echo "*** or is declared to -dlopen it." + + if test $allow_undefined = no; then + echo + echo "*** Since this library must not contain undefined symbols," + echo "*** because either the platform does not support them or" + echo "*** it was explicitly requested with -no-undefined," + echo "*** libtool will only create a static version of it." + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + fi + fi + # Done checking deplibs! + deplibs=$newdeplibs + fi + + # All the library-specific variables (install_libdir is set above). + library_names= + old_library= + dlname= + + # Test again, we may have decided not to build it any more + if test "$build_libtool_libs" = yes; then + if test $hardcode_into_libs = yes; then + # Hardcode the library paths + hardcode_libdirs= + dep_rpath= + rpath="$finalize_rpath" + test "$mode" != relink && rpath="$compile_rpath$rpath" + for libdir in $rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + dep_rpath="$dep_rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval dep_rpath=\"$hardcode_libdir_flag_spec\" + fi + if test -n "$runpath_var" && test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + rpath="$rpath$dir:" + done + eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" + fi + test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" + fi + + shlibpath="$finalize_shlibpath" + test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + if test -n "$shlibpath"; then + eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" + fi + + # Get the real and link names of the library. + eval library_names=\"$library_names_spec\" + set dummy $library_names + realname="$2" + shift; shift + + if test -n "$soname_spec"; then + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + test -z "$dlname" && dlname=$soname + + lib="$output_objdir/$realname" + for link + do + linknames="$linknames $link" + done + + # Ensure that we have .o objects for linkers which dislike .lo + # (e.g. aix) in case we are running --disable-static + for obj in $libobjs; do + xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$obj"; then + xdir="." + else + xdir="$xdir" + fi + baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` + oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` + if test ! -f $xdir/$oldobj; then + $show "(cd $xdir && ${LN_S} $baseobj $oldobj)" + $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $? + fi + done + + # Use standard objects if they are pic + test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then + $show "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $run $rm $export_symbols + eval cmds=\"$export_symbols_cmds\" + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + if test -n "$export_symbols_regex"; then + $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" + $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + $show "$mv \"${export_symbols}T\" \"$export_symbols\"" + $run eval '$mv "${export_symbols}T" "$export_symbols"' + fi + fi + fi + + if test -n "$export_symbols" && test -n "$include_expsyms"; then + $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' + fi + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + else + gentop="$output_objdir/${outputname}x" + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + $show "mkdir $gentop" + $run mkdir "$gentop" + status=$? + if test $status -ne 0 && test ! -d "$gentop"; then + exit $status + fi + generated="$generated $gentop" + + for xlib in $convenience; do + # Extract the objects. + case $xlib in + [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; + *) xabs=`pwd`"/$xlib" ;; + esac + xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` + xdir="$gentop/$xlib" + + $show "${rm}r $xdir" + $run ${rm}r "$xdir" + $show "mkdir $xdir" + $run mkdir "$xdir" + status=$? + if test $status -ne 0 && test ! -d "$xdir"; then + exit $status + fi + $show "(cd $xdir && $AR x $xabs)" + $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? + + libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` + done + fi + fi + + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then + eval flag=\"$thread_safe_flag_spec\" + linker_flags="$linker_flags $flag" + fi + + # Make a backup of the uninstalled library when relinking + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? + fi + + # Do each of the archive commands. + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval cmds=\"$archive_expsym_cmds\" + else + eval cmds=\"$archive_cmds\" + fi + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? + exit 0 + fi + + # Create links to the real library. + for linkname in $linknames; do + if test "$realname" != "$linkname"; then + $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" + $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? + fi + done + + # If -module or -export-dynamic was specified, set the dlname. + if test "$module" = yes || test "$export_dynamic" = yes; then + # On all known operating systems, these are identical. + dlname="$soname" + fi + fi + ;; + + obj) + if test -n "$deplibs"; then + $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 + fi + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 + fi + + if test -n "$rpath"; then + $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 + fi + + if test -n "$xrpath"; then + $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 + fi + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 + fi + + case $output in + *.lo) + if test -n "$objs$old_deplibs"; then + $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 + exit 1 + fi + libobj="$output" + obj=`$echo "X$output" | $Xsed -e "$lo2o"` + ;; + *) + libobj= + obj="$output" + ;; + esac + + # Delete the old objects. + $run $rm $obj $libobj + + # Objects from convenience libraries. This assumes + # single-version convenience libraries. Whenever we create + # different ones for PIC/non-PIC, this we'll have to duplicate + # the extraction. + reload_conv_objs= + gentop= + # reload_cmds runs $LD directly, so let us get rid of + # -Wl from whole_archive_flag_spec + wl= + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" + else + gentop="$output_objdir/${obj}x" + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + $show "mkdir $gentop" + $run mkdir "$gentop" + status=$? + if test $status -ne 0 && test ! -d "$gentop"; then + exit $status + fi + generated="$generated $gentop" + + for xlib in $convenience; do + # Extract the objects. + case $xlib in + [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; + *) xabs=`pwd`"/$xlib" ;; + esac + xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` + xdir="$gentop/$xlib" + + $show "${rm}r $xdir" + $run ${rm}r "$xdir" + $show "mkdir $xdir" + $run mkdir "$xdir" + status=$? + if test $status -ne 0 && test ! -d "$xdir"; then + exit $status + fi + $show "(cd $xdir && $AR x $xabs)" + $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? + + reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` + done + fi + fi + + # Create the old-style object. + reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + + output="$obj" + eval cmds=\"$reload_cmds\" + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + + # Exit if we aren't doing a library object file. + if test -z "$libobj"; then + if test -n "$gentop"; then + $show "${rm}r $gentop" + $run ${rm}r $gentop + fi + + exit 0 + fi + + if test "$build_libtool_libs" != yes; then + if test -n "$gentop"; then + $show "${rm}r $gentop" + $run ${rm}r $gentop + fi + + # Create an invalid libtool object if no PIC, so that we don't + # accidentally link it into a program. + $show "echo timestamp > $libobj" + $run eval "echo timestamp > $libobj" || exit $? + exit 0 + fi + + if test -n "$pic_flag" || test "$pic_mode" != default; then + # Only do commands if we really have different PIC objects. + reload_objs="$libobjs $reload_conv_objs" + output="$libobj" + eval cmds=\"$reload_cmds\" + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + else + # Just create a symlink. + $show $rm $libobj + $run $rm $libobj + xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$libobj"; then + xdir="." + else + xdir="$xdir" + fi + baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` + oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` + $show "(cd $xdir && $LN_S $oldobj $baseobj)" + $run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $? + fi + + if test -n "$gentop"; then + $show "${rm}r $gentop" + $run ${rm}r $gentop + fi + + exit 0 + ;; + + prog) + case $host in + *cygwin*) output=`echo $output | sed -e 's,.exe$,,;s,$,.exe,'` ;; + esac + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 + fi + + if test "$preload" = yes; then + if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && + test "$dlopen_self_static" = unknown; then + $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." + fi + fi + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` + finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` + ;; + esac + + # AIX needs explicit runtime linking option + + compile_command="$compile_command $use_runtimelinking" + finalize_command="$finalize_command $use_runtimelinking" + + compile_command="$compile_command $compile_deplibs" + finalize_command="$finalize_command $finalize_deplibs" + + if test -n "$rpath$xrpath"; then + # If the user specified any rpath flags, then add them. + for libdir in $rpath $xrpath; do + # This is the magic to use -rpath. + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done + fi + + # Now hardcode the library paths + rpath= + hardcode_libdirs= + for libdir in $compile_rpath $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + rpath="$rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + case :$dllsearchpath: in + *":$libdir:"*) ;; + *) dllsearchpath="$dllsearchpath:$libdir";; + esac + ;; + esac + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + compile_rpath="$rpath" + + rpath= + hardcode_libdirs= + for libdir in $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + rpath="$rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$finalize_perm_rpath " in + *" $libdir "*) ;; + *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + finalize_rpath="$rpath" + + if test -n "$libobjs" && test "$build_old_libs" = yes; then + # Transform all the library objects into standard objects. + compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + fi + + dlsyms= + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + if test -n "$NM" && test -n "$global_symbol_pipe"; then + dlsyms="${outputname}S.c" + else + $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 + fi + fi + + if test -n "$dlsyms"; then + case $dlsyms in + "") ;; + *.c) + # Discover the nlist of each of the dlfiles. + nlist="$output_objdir/${outputname}.nm" + + $show "$rm $nlist ${nlist}S ${nlist}T" + $run $rm "$nlist" "${nlist}S" "${nlist}T" + + # Parse the name list into a source file. + $show "creating $output_objdir/$dlsyms" + + test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ + /* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ + /* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ + + #ifdef __cplusplus + extern \"C\" { + #endif + + /* Prevent the only kind of declaration conflicts we can make. */ + #define lt_preloaded_symbols some_other_symbol + + /* External symbol declarations for the compiler. */\ + " + + if test "$dlself" = yes; then + $show "generating symbol list for \`$output'" + + test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" + + # Add our own program objects to the symbol list. + progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + for arg in $progfiles; do + $show "extracting global C symbols from \`$arg'" + $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" + done + + if test -n "$exclude_expsyms"; then + $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + $run eval '$mv "$nlist"T "$nlist"' + fi + + if test -n "$export_symbols_regex"; then + $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T' + $run eval '$mv "$nlist"T "$nlist"' + fi + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + export_symbols="$output_objdir/$output.exp" + $run $rm $export_symbols + $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + else + $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"' + $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T' + $run eval 'mv "$nlist"T "$nlist"' + fi + fi + + for arg in $dlprefiles; do + $show "extracting global C symbols from \`$arg'" + name=`echo "$arg" | sed -e 's%^.*/%%'` + $run eval 'echo ": $name " >> "$nlist"' + $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" + done + + if test -z "$run"; then + # Make sure we have at least an empty file. + test -f "$nlist" || : > "$nlist" + + if test -n "$exclude_expsyms"; then + egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $mv "$nlist"T "$nlist" + fi + + # Try sorting and uniquifying the output. + if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then + : + else + grep -v "^: " < "$nlist" > "$nlist"S + fi + + if test -f "$nlist"S; then + eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' + else + echo '/* NONE */' >> "$output_objdir/$dlsyms" + fi + + $echo >> "$output_objdir/$dlsyms" "\ + + #undef lt_preloaded_symbols + + #if defined (__STDC__) && __STDC__ + # define lt_ptr void * + #else + # define lt_ptr char * + # define const + #endif + + /* The mapping between symbol names and symbols. */ + const struct { + const char *name; + lt_ptr address; + } + lt_preloaded_symbols[] = + {\ + " + + eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" + + $echo >> "$output_objdir/$dlsyms" "\ + {0, (lt_ptr) 0} + }; + + /* This works around a problem in FreeBSD linker */ + #ifdef FREEBSD_WORKAROUND + static const void *lt_preloaded_setup() { + return lt_preloaded_symbols; + } + #endif + + #ifdef __cplusplus + } + #endif\ + " + fi + + pic_flag_for_symtable= + case $host in + # compiling the symbol table file with pic_flag works around + # a FreeBSD bug that causes programs to crash when -lm is + # linked before any other PIC object. But we must not use + # pic_flag when linking with -static. The problem exists in + # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. + *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + case "$compile_command " in + *" -static "*) ;; + *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";; + esac;; + *-*-hpux*) + case "$compile_command " in + *" -static "*) ;; + *) pic_flag_for_symtable=" $pic_flag -DPIC";; + esac + esac + + # Now compile the dynamic symbol file. + $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" + $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? + + # Clean up the generated files. + $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" + $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" + + # Transform the symbol file into the correct name. + compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + ;; + *) + $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 + exit 1 + ;; + esac + else + # We keep going just in case the user didn't refer to + # lt_preloaded_symbols. The linker will fail if global_symbol_pipe + # really was required. + + # Nullify the symbol file. + compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` + fi + + if test $need_relink = no || test "$build_libtool_libs" != yes; then + # Replace the output file specification. + compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + link_command="$compile_command$compile_rpath" + + # We have no uninstalled library dependencies, so finalize right now. + $show "$link_command" + $run eval "$link_command" + status=$? + + # Delete the generated files. + if test -n "$dlsyms"; then + $show "$rm $output_objdir/${outputname}S.${objext}" + $run $rm "$output_objdir/${outputname}S.${objext}" + fi + + exit $status + fi + + if test -n "$shlibpath_var"; then + # We should set the shlibpath_var + rpath= + for dir in $temp_rpath; do + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) + # Absolute path. + rpath="$rpath$dir:" + ;; + *) + # Relative path: add a thisdir entry. + rpath="$rpath\$thisdir/$dir:" + ;; + esac + done + temp_rpath="$rpath" + fi + + if test -n "$compile_shlibpath$finalize_shlibpath"; then + compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" + fi + if test -n "$finalize_shlibpath"; then + finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" + fi + + compile_var= + finalize_var= + if test -n "$runpath_var"; then + if test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + rpath="$rpath$dir:" + done + compile_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + if test -n "$finalize_perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $finalize_perm_rpath; do + rpath="$rpath$dir:" + done + finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + fi + + if test "$no_install" = yes; then + # We don't need to create a wrapper script. + link_command="$compile_var$compile_command$compile_rpath" + # Replace the output file specification. + link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + # Delete the old output file. + $run $rm $output + # Link the executable and exit + $show "$link_command" + $run eval "$link_command" || exit $? + exit 0 + fi + + if test "$hardcode_action" = relink; then + # Fast installation is not supported + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + + $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 + $echo "$modename: \`$output' will be relinked during installation" 1>&2 + else + if test "$fast_install" != no; then + link_command="$finalize_var$compile_command$finalize_rpath" + if test "$fast_install" = yes; then + relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` + else + # fast_install is set to needless + relink_command= + fi + else + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + fi + fi + + # Replace the output file specification. + link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + + # Delete the old output files. + $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname + + $show "$link_command" + $run eval "$link_command" || exit $? + + # Now create the wrapper script. + $show "creating $output" + + # Quote the relink command for shipping. + if test -n "$relink_command"; then + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` + relink_command="$var=\"$var_value\"; export $var; $relink_command" + fi + done + relink_command="cd `pwd`; $relink_command" + relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` + fi + + # Quote $echo for shipping. + if test "X$echo" = "X$SHELL $0 --fallback-echo"; then + case $0 in + [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";; + *) qecho="$SHELL `pwd`/$0 --fallback-echo";; + esac + qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` + else + qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` + fi + + # Only actually do things if our run command is non-null. + if test -z "$run"; then + # win32 will think the script is a binary if it has + # a .exe suffix, so we strip it off here. + case $output in + *.exe) output=`echo $output|sed 's,.exe$,,'` ;; + esac + # test for cygwin because mv fails w/o .exe extensions + case $host in + *cygwin*) exeext=.exe ;; + *) exeext= ;; + esac + $rm $output + trap "$rm $output; exit 1" 1 2 15 + + $echo > $output "\ + #! $SHELL + + # $output - temporary wrapper script for $objdir/$outputname + # Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP + # + # The $output program cannot be directly executed until all the libtool + # libraries that it depends on are installed. + # + # This wrapper script should never be moved out of the build directory. + # If it is, it will not operate correctly. + + # Sed substitution that helps us do robust quoting. It backslashifies + # metacharacters that are still active within double-quoted strings. + Xsed='sed -e 1s/^X//' + sed_quote_subst='$sed_quote_subst' + + # The HP-UX ksh and POSIX shell print the target directory to stdout + # if CDPATH is set. + if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi + + relink_command=\"$relink_command\" + + # This environment variable determines our operation mode. + if test \"\$libtool_install_magic\" = \"$magic\"; then + # install mode needs the following variable: + notinst_deplibs='$notinst_deplibs' + else + # When we are sourced in execute mode, \$file and \$echo are already set. + if test \"\$libtool_execute_magic\" != \"$magic\"; then + echo=\"$qecho\" + file=\"\$0\" + # Make sure echo works. + if test \"X\$1\" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift + elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then + # Yippee, \$echo works! + : + else + # Restart under the correct shell, and then maybe \$echo will work. + exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} + fi + fi\ + " + $echo >> $output "\ + + # Find the directory that this script lives in. + thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` + test \"x\$thisdir\" = \"x\$file\" && thisdir=. + + # Follow symbolic links until we get to the real thisdir. + file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\` + while test -n \"\$file\"; do + destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` + + # If there was a directory component, then change thisdir. + if test \"x\$destdir\" != \"x\$file\"; then + case \"\$destdir\" in + [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; + *) thisdir=\"\$thisdir/\$destdir\" ;; + esac + fi + + file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\` + done + + # Try to get the absolute directory name. + absdir=\`cd \"\$thisdir\" && pwd\` + test -n \"\$absdir\" && thisdir=\"\$absdir\" + " + + if test "$fast_install" = yes; then + echo >> $output "\ + program=lt-'$outputname'$exeext + progdir=\"\$thisdir/$objdir\" + + if test ! -f \"\$progdir/\$program\" || \\ + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\ + test \"X\$file\" != \"X\$progdir/\$program\"; }; then + + file=\"\$\$-\$program\" + + if test ! -d \"\$progdir\"; then + $mkdir \"\$progdir\" + else + $rm \"\$progdir/\$file\" + fi" + + echo >> $output "\ + + # relink executable if necessary + if test -n \"\$relink_command\"; then + if relink_command_output=\`eval \$relink_command 2>&1\`; then : + else + $echo \"\$relink_command_output\" >&2 + $rm \"\$progdir/\$file\" + exit 1 + fi + fi + + $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || + { $rm \"\$progdir/\$program\"; + $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } + $rm \"\$progdir/\$file\" + fi" + else + echo >> $output "\ + program='$outputname' + progdir=\"\$thisdir/$objdir\" + " + fi + + echo >> $output "\ + + if test -f \"\$progdir/\$program\"; then" + + # Export our shlibpath_var if we have one. + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + $echo >> $output "\ + # Add our own library path to $shlibpath_var + $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + + # Some systems cannot cope with colon-terminated $shlibpath_var + # The second colon is a workaround for a bug in BeOS R4 sed + $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` + + export $shlibpath_var + " + fi + + # fixup the dll searchpath if we need to. + if test -n "$dllsearchpath"; then + $echo >> $output "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH + " + fi + + $echo >> $output "\ + if test \"\$libtool_execute_magic\" != \"$magic\"; then + # Run the actual program with our arguments. + " + case $host in + # win32 systems need to use the prog path for dll + # lookup to work + *-*-cygwin* | *-*-pw32*) + $echo >> $output "\ + exec \$progdir/\$program \${1+\"\$@\"} + " + ;; + + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2*) + $echo >> $output "\ + exec \$progdir\\\\\$program \${1+\"\$@\"} + " + ;; + + *) + $echo >> $output "\ + # Export the path to the program. + PATH=\"\$progdir:\$PATH\" + export PATH + + exec \$program \${1+\"\$@\"} + " + ;; + esac + $echo >> $output "\ + \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" + exit 1 + fi + else + # The program doesn't exist. + \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 + \$echo \"This script is just a wrapper for \$program.\" 1>&2 + echo \"See the $PACKAGE documentation for more information.\" 1>&2 + exit 1 + fi + fi\ + " + chmod +x $output + fi + exit 0 + ;; + esac + + # See if we need to build an old-fashioned archive. + for oldlib in $oldlibs; do + + if test "$build_libtool_libs" = convenience; then + oldobjs="$libobjs_save" + addlibs="$convenience" + build_libtool_libs=no + else + if test "$build_libtool_libs" = module; then + oldobjs="$libobjs_save" + build_libtool_libs=no + else + oldobjs="$objs$old_deplibs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP` + fi + addlibs="$old_convenience" + fi + + if test -n "$addlibs"; then + gentop="$output_objdir/${outputname}x" + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + $show "mkdir $gentop" + $run mkdir "$gentop" + status=$? + if test $status -ne 0 && test ! -d "$gentop"; then + exit $status + fi + generated="$generated $gentop" + + # Add in members from convenience archives. + for xlib in $addlibs; do + # Extract the objects. + case $xlib in + [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; + *) xabs=`pwd`"/$xlib" ;; + esac + xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` + xdir="$gentop/$xlib" + + $show "${rm}r $xdir" + $run ${rm}r "$xdir" + $show "mkdir $xdir" + $run mkdir "$xdir" + status=$? + if test $status -ne 0 && test ! -d "$xdir"; then + exit $status + fi + $show "(cd $xdir && $AR x $xabs)" + $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? + + oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP` + done + fi + + # Do each command in the archive commands. + if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then + eval cmds=\"$old_archive_from_new_cmds\" + else + # Ensure that we have .o objects in place in case we decided + # not to build a shared library, and have fallen back to building + # static libs even though --disable-static was passed! + for oldobj in $oldobjs; do + if test ! -f $oldobj; then + xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$oldobj"; then + xdir="." + else + xdir="$xdir" + fi + baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'` + obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"` + $show "(cd $xdir && ${LN_S} $obj $baseobj)" + $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $? + fi + done + + eval cmds=\"$old_archive_cmds\" + fi + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + done + + if test -n "$generated"; then + $show "${rm}r$generated" + $run ${rm}r$generated + fi + + # Now create the libtool archive. + case $output in + *.la) + old_library= + test "$build_old_libs" = yes && old_library="$libname.$libext" + $show "creating $output" + + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` + relink_command="$var=\"$var_value\"; export $var; $relink_command" + fi + done + # Quote the link command for shipping. + relink_command="cd `pwd`; $SHELL $0 --mode=relink $libtool_args" + relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` + + # Only create the output if not a dry run. + if test -z "$run"; then + for installed in no yes; do + if test "$installed" = yes; then + if test -z "$install_libdir"; then + break + fi + output="$output_objdir/$outputname"i + # Replace all uninstalled libtool libraries with the installed ones + newdependency_libs= + for deplib in $dependency_libs; do + case $deplib in + *.la) + name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` + eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + if test -z "$libdir"; then + $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 + exit 1 + fi + newdependency_libs="$newdependency_libs $libdir/$name" + ;; + *) newdependency_libs="$newdependency_libs $deplib" ;; + esac + done + dependency_libs="$newdependency_libs" + newdlfiles= + for lib in $dlfiles; do + name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + if test -z "$libdir"; then + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit 1 + fi + newdlfiles="$newdlfiles $libdir/$name" + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + if test -z "$libdir"; then + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit 1 + fi + newdlprefiles="$newdlprefiles $libdir/$name" + done + dlprefiles="$newdlprefiles" + fi + $rm $output + # place dlname in correct position for cygwin + tdlname=$dlname + case $host,$output,$installed,$module,$dlname in + *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; + *aix*,*,*,*,*) tdlname=$realname\($dlname\) ;; + esac + $echo > $output "\ + # $outputname - a libtool library file + # Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP + # + # Please DO NOT delete this file! + # It is necessary for linking the library. + + # The name that we can dlopen(3). + dlname='$tdlname' + + # Names of this library. + library_names='$library_names' + + # The name of the static archive. + old_library='$old_library' + + # Libraries that this one depends upon. + dependency_libs='$dependency_libs' + + # Version information for $libname. + current=$current + age=$age + revision=$revision + + # Is this an already installed library? + installed=$installed + + # Files to dlopen/dlpreopen + dlopen='$dlfiles' + dlpreopen='$dlprefiles' + + # Directory that this library needs to be installed in: + libdir='$install_libdir'" + if test "$installed" = no && test $need_relink = yes; then + $echo >> $output "\ + relink_command=\"$relink_command\"" + fi + done + fi + + # Do a symbolic link so that the libtool archive can be found in + # LD_LIBRARY_PATH before the program is installed. + $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" + $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? + ;; + esac + exit 0 + ;; + + # libtool install mode + install) + modename="$modename: install" + + # There may be an optional sh(1) argument at the beginning of + # install_prog (especially on Windows NT). + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + # Allow the use of GNU shtool's install command. + $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then + # Aesthetically quote it. + arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + arg="\"$arg\"" + ;; + esac + install_prog="$arg " + arg="$1" + shift + else + install_prog= + arg="$nonopt" + fi + + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + arg="\"$arg\"" + ;; + esac + install_prog="$install_prog$arg" + + # We need to accept at least all the BSD install flags. + dest= + files= + opts= + prev= + install_type= + isdir=no + stripme= + for arg + do + if test -n "$dest"; then + files="$files $dest" + dest="$arg" + continue + fi + + case $arg in + -d) isdir=yes ;; + -f) prev="-f" ;; + -g) prev="-g" ;; + -m) prev="-m" ;; + -o) prev="-o" ;; + -s) + stripme=" -s" + continue + ;; + -*) ;; + + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + prev= + else + dest="$arg" + continue + fi + ;; + esac + + # Aesthetically quote the argument. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + arg="\"$arg\"" + ;; + esac + install_prog="$install_prog $arg" + done + + if test -z "$install_prog"; then + $echo "$modename: you must specify an install program" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + if test -n "$prev"; then + $echo "$modename: the \`$prev' option requires an argument" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + if test -z "$files"; then + if test -z "$dest"; then + $echo "$modename: no file or destination specified" 1>&2 + else + $echo "$modename: you must specify a destination" 1>&2 + fi + $echo "$help" 1>&2 + exit 1 + fi + + # Strip any trailing slash from the destination. + dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` + + # Check to see that the destination is a directory. + test -d "$dest" && isdir=yes + if test "$isdir" = yes; then + destdir="$dest" + destname= + else + destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` + test "X$destdir" = "X$dest" && destdir=. + destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` + + # Not a directory, so check to see that there is only one file specified. + set dummy $files + if test $# -gt 2; then + $echo "$modename: \`$dest' is not a directory" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + fi + case $destdir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + for file in $files; do + case $file in + *.lo) ;; + *) + $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; + esac + done + ;; + esac + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + staticlibs= + future_libdirs= + current_libdirs= + for file in $files; do + + # Do each installation. + case $file in + *.$libext) + # Do the static libraries later. + staticlibs="$staticlibs $file" + ;; + + *.la) + # Check to see that this really is a libtool archive. + if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + library_names= + old_library= + relink_command= + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Add the libdir to current_libdirs if it is the destination. + if test "X$destdir" = "X$libdir"; then + case "$current_libdirs " in + *" $libdir "*) ;; + *) current_libdirs="$current_libdirs $libdir" ;; + esac + else + # Note the libdir as a future libdir. + case "$future_libdirs " in + *" $libdir "*) ;; + *) future_libdirs="$future_libdirs $libdir" ;; + esac + fi + + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ + test "X$dir" = "X$file/" && dir= + dir="$dir$objdir" + + # BEGIN WORKAROUND DESTDIR + # if test -n "$relink_command"; then + # $echo "$modename: warning: relinking \`$file'" 1>&2 + # $show "$relink_command" + # if $run eval "$relink_command"; then : + # else + # $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 + # continue + # fi + # fi + # END WORKAROUND DESTDIR + + # See the names of the shared library. + set dummy $library_names + if test -n "$2"; then + realname="$2" + shift + shift + + srcname="$realname" + # BEGIN WORKAROUND DESTDIR + # test -n "$relink_command" && srcname="$realname"T + # END WORKAROUND DESTDIR + + # Install the shared library and build the symlinks. + $show "$install_prog $dir/$srcname $destdir/$realname" + $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? + if test -n "$stripme" && test -n "$striplib"; then + $show "$striplib $destdir/$realname" + $run eval "$striplib $destdir/$realname" || exit $? + fi + + if test $# -gt 0; then + # Delete the old symlinks, and create new ones. + for linkname + do + if test "$linkname" != "$realname"; then + $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" + $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" + fi + done + fi + + # Do each command in the postinstall commands. + lib="$destdir/$realname" + eval cmds=\"$postinstall_cmds\" + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + + # Install the pseudo-library for information purposes. + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + instname="$dir/$name"i + $show "$install_prog $instname $destdir/$name" + $run eval "$install_prog $instname $destdir/$name" || exit $? + + # Maybe install the static library, too. + test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" + ;; + + *.lo) + # Install (i.e. copy) a libtool object. + + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + destfile="$destdir/$destfile" + fi + + # Deduce the name of the destination old-style object file. + case $destfile in + *.lo) + staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` + ;; + *.$objext) + staticdest="$destfile" + destfile= + ;; + *) + $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; + esac + + # Install the libtool object if requested. + if test -n "$destfile"; then + $show "$install_prog $file $destfile" + $run eval "$install_prog $file $destfile" || exit $? + fi + + # Install the old object if enabled. + if test "$build_old_libs" = yes; then + # Deduce the name of the old-style object file. + staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` + + $show "$install_prog $staticobj $staticdest" + $run eval "$install_prog \$staticobj \$staticdest" || exit $? + fi + exit 0 + ;; + + *) + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + destfile="$destdir/$destfile" + fi + + # Do a test to see if this is really a libtool program. + if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + notinst_deplibs= + relink_command= + + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Check the variables that should have been set. + if test -z "$notinst_deplibs"; then + $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2 + exit 1 + fi + + finalize=yes + for lib in $notinst_deplibs; do + # Check to see that each library is installed. + libdir= + if test -f "$lib"; then + # If there is no directory component, then add one. + case $lib in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + fi + libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test + if test -n "$libdir" && test ! -f "$libfile"; then + $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 + finalize=no + fi + done + + relink_command= + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + outputname= + if test "$fast_install" = no && test -n "$relink_command"; then + if test "$finalize" = yes && test -z "$run"; then + tmpdir="/tmp" + test -n "$TMPDIR" && tmpdir="$TMPDIR" + tmpdir="$tmpdir/libtool-$$" + if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then : + else + $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 + continue + fi + file=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + outputname="$tmpdir/$file" + # Replace the output file specification. + relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` + + $show "$relink_command" + if $run eval "$relink_command"; then : + else + $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 + ${rm}r "$tmpdir" + continue + fi + file="$outputname" + else + $echo "$modename: warning: cannot relink \`$file'" 1>&2 + fi + else + # Install the binary that we compiled earlier. + file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` + fi + fi + + # remove .exe since cygwin /usr/bin/install will append another + # one anyways + case $install_prog,$host in + /usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok + ;; + *.exe:*) + destfile=$destfile.exe + ;; + *:*.exe) + destfile=`echo $destfile | sed -e 's,.exe$,,'` + ;; + esac + ;; + esac + $show "$install_prog$stripme $file $destfile" + $run eval "$install_prog\$stripme \$file \$destfile" || exit $? + test -n "$outputname" && ${rm}r "$tmpdir" + ;; + esac + done + + for file in $staticlibs; do + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + + # Set up the ranlib parameters. + oldlib="$destdir/$name" + + $show "$install_prog $file $oldlib" + $run eval "$install_prog \$file \$oldlib" || exit $? + + if test -n "$stripme" && test -n "$striplib"; then + $show "$old_striplib $oldlib" + $run eval "$old_striplib $oldlib" || exit $? + fi + + # Do each command in the postinstall commands. + eval cmds=\"$old_postinstall_cmds\" + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + done + + if test -n "$future_libdirs"; then + $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 + fi + + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + test -n "$run" && current_libdirs=" -n$current_libdirs" + exec_cmd='$SHELL $0 --finish$current_libdirs' + else + exit 0 + fi + ;; + + # libtool finish mode + finish) + modename="$modename: finish" + libdirs="$nonopt" + admincmds= + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for dir + do + libdirs="$libdirs $dir" + done + + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. + eval cmds=\"$finish_cmds\" + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || admincmds="$admincmds + $cmd" + done + IFS="$save_ifs" + fi + if test -n "$finish_eval"; then + # Do the single finish_eval. + eval cmds=\"$finish_eval\" + $run eval "$cmds" || admincmds="$admincmds + $cmds" + fi + done + fi + + # Exit here if they wanted silent mode. + test "$show" = ":" && exit 0 + + echo "----------------------------------------------------------------------" + echo "Libraries have been installed in:" + for libdir in $libdirs; do + echo " $libdir" + done + echo + echo "If you ever happen to want to link against installed libraries" + echo "in a given directory, LIBDIR, you must either use libtool, and" + echo "specify the full pathname of the library, or use the \`-LLIBDIR'" + echo "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + echo " - add LIBDIR to the \`$shlibpath_var' environment variable" + echo " during execution" + fi + if test -n "$runpath_var"; then + echo " - add LIBDIR to the \`$runpath_var' environment variable" + echo " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" + + echo " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then + echo " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi + echo + echo "See any operating system documentation about shared libraries for" + echo "more information, such as the ld(1) and ld.so(8) manual pages." + echo "----------------------------------------------------------------------" + exit 0 + ;; + + # libtool execute mode + execute) + modename="$modename: execute" + + # The first argument is the command name. + cmd="$nonopt" + if test -z "$cmd"; then + $echo "$modename: you must specify a COMMAND" 1>&2 + $echo "$help" + exit 1 + fi + + # Handle -dlopen flags immediately. + for file in $execute_dlfiles; do + if test ! -f "$file"; then + $echo "$modename: \`$file' is not a file" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + dir= + case $file in + *.la) + # Check to see that this really is a libtool archive. + if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + # Read the libtool library. + dlname= + library_names= + + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Skip this library if it cannot be dlopened. + if test -z "$dlname"; then + # Warn if it was a shared library. + test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" + continue + fi + + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$file" && dir=. + + if test -f "$dir/$objdir/$dlname"; then + dir="$dir/$objdir" + else + $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 + exit 1 + fi + ;; + + *.lo) + # Just add the directory containing the .lo file. + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$file" && dir=. + ;; + + *) + $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 + continue + ;; + esac + + # Get the absolute pathname. + absdir=`cd "$dir" && pwd` + test -n "$absdir" && dir="$absdir" + + # Now add the directory to shlibpath_var. + if eval "test -z \"\$$shlibpath_var\""; then + eval "$shlibpath_var=\"\$dir\"" + else + eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" + fi + done + + # This variable tells wrapper scripts just to set shlibpath_var + # rather than running their programs. + libtool_execute_magic="$magic" + + # Check if any of the arguments is a wrapper script. + args= + for file + do + case $file in + -*) ;; + *) + # Do a test to see if this is really a libtool program. + if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Transform arg to wrapped name. + file="$progdir/$program" + fi + ;; + esac + # Quote arguments (to preserve shell metacharacters). + file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` + args="$args \"$file\"" + done + + if test -z "$run"; then + if test -n "$shlibpath_var"; then + # Export the shlibpath_var. + eval "export $shlibpath_var" + fi + + # Restore saved enviroment variables + if test "${save_LC_ALL+set}" = set; then + LC_ALL="$save_LC_ALL"; export LC_ALL + fi + if test "${save_LANG+set}" = set; then + LANG="$save_LANG"; export LANG + fi + + # Now prepare to actually exec the command. + exec_cmd='"$cmd"$args' + else + # Display what would be done. + if test -n "$shlibpath_var"; then + eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" + $echo "export $shlibpath_var" + fi + $echo "$cmd$args" + exit 0 + fi + ;; + + # libtool clean and uninstall mode + clean | uninstall) + modename="$modename: $mode" + rm="$nonopt" + files= + rmforce= + exit_status=0 + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + for arg + do + case $arg in + -f) rm="$rm $arg"; rmforce=yes ;; + -*) rm="$rm $arg" ;; + *) files="$files $arg" ;; + esac + done + + if test -z "$rm"; then + $echo "$modename: you must specify an RM program" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + rmdirs= + + for file in $files; do + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + if test "X$dir" = "X$file"; then + dir=. + objdir="$objdir" + else + objdir="$dir/$objdir" + fi + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + test $mode = uninstall && objdir="$dir" + + # Remember objdir for removal later, being careful to avoid duplicates + if test $mode = clean; then + case " $rmdirs " in + *" $objdir "*) ;; + *) rmdirs="$rmdirs $objdir" ;; + esac + fi + + # Don't error if the file doesn't exist and rm -f was used. + if (test -L "$file") >/dev/null 2>&1 \ + || (test -h "$file") >/dev/null 2>&1 \ + || test -f "$file"; then + : + elif test -d "$file"; then + exit_status=1 + continue + elif test "$rmforce" = yes; then + continue + fi + + rmfiles="$file" + + case $name in + *.la) + # Possibly a libtool archive, so verify it. + if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + . $dir/$name + + # Delete the libtool libraries and symlinks. + for n in $library_names; do + rmfiles="$rmfiles $objdir/$n" + done + test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" + test $mode = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" + + if test $mode = uninstall; then + if test -n "$library_names"; then + # Do each command in the postuninstall commands. + eval cmds=\"$postuninstall_cmds\" + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" + if test $? != 0 && test "$rmforce" != yes; then + exit_status=1 + fi + done + IFS="$save_ifs" + fi + + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. + eval cmds=\"$old_postuninstall_cmds\" + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" + if test $? != 0 && test "$rmforce" != yes; then + exit_status=1 + fi + done + IFS="$save_ifs" + fi + # FIXME: should reinstall the best remaining shared library. + fi + fi + ;; + + *.lo) + if test "$build_old_libs" = yes; then + oldobj=`$echo "X$name" | $Xsed -e "$lo2o"` + rmfiles="$rmfiles $dir/$oldobj" + fi + ;; + + *) + # Do a test to see if this is a libtool program. + if test $mode = clean && + (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + relink_command= + . $dir/$file + + rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" + if test "$fast_install" = yes && test -n "$relink_command"; then + rmfiles="$rmfiles $objdir/lt-$name" + fi + fi + ;; + esac + $show "$rm $rmfiles" + $run $rm $rmfiles || exit_status=1 + done + + # Try to remove the ${objdir}s in the directories where we deleted files + for dir in $rmdirs; do + if test -d "$dir"; then + $show "rmdir $dir" + $run rmdir $dir >/dev/null 2>&1 + fi + done + + exit $exit_status + ;; + + "") + $echo "$modename: you must specify a MODE" 1>&2 + $echo "$generic_help" 1>&2 + exit 1 + ;; + esac + + if test -z "$exec_cmd"; then + $echo "$modename: invalid operation mode \`$mode'" 1>&2 + $echo "$generic_help" 1>&2 + exit 1 + fi + fi # test -z "$show_help" + + if test -n "$exec_cmd"; then + eval exec $exec_cmd + exit 1 + fi + + # We need to display help for each of the modes. + case $mode in + "") $echo \ + "Usage: $modename [OPTION]... [MODE-ARG]... + + Provide generalized library-building support services. + + --config show all configuration variables + --debug enable verbose shell tracing + -n, --dry-run display commands without modifying any files + --features display basic configuration information and exit + --finish same as \`--mode=finish' + --help display this help message and exit + --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] + --quiet same as \`--silent' + --silent don't print informational messages + --version print version information + + MODE must be one of the following: + + clean remove files from the build directory + compile compile a source file into a libtool object + execute automatically set library path, then run a program + finish complete the installation of libtool libraries + install install libraries or executables + link create a library or an executable + uninstall remove libraries from an installed directory + + MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for + a more detailed description of MODE." + exit 0 + ;; + + clean) + $echo \ + "Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... + + Remove files from the build directory. + + RM is the name of the program to use to delete files associated with each FILE + (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed + to RM. + + If FILE is a libtool library, object or program, all the files associated + with it are deleted. Otherwise, only FILE itself is deleted using RM." + ;; + + compile) + $echo \ + "Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE + + Compile a source file into a libtool library object. + + This mode accepts the following additional options: + + -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -prefer-pic try to building PIC objects only + -prefer-non-pic try to building non-PIC objects only + -static always build a \`.o' file suitable for static linking + + COMPILE-COMMAND is a command to be used in creating a \`standard' object file + from the given SOURCEFILE. + + The output file name is determined by removing the directory component from + SOURCEFILE, then substituting the C source code suffix \`.c' with the + library object suffix, \`.lo'." + ;; + + execute) + $echo \ + "Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... + + Automatically set library path, then run a program. + + This mode accepts the following additional options: + + -dlopen FILE add the directory containing FILE to the library path + + This mode sets the library path environment variable according to \`-dlopen' + flags. + + If any of the ARGS are libtool executable wrappers, then they are translated + into their corresponding uninstalled binary, and any of their required library + directories are added to the library path. + + Then, COMMAND is executed, with ARGS as arguments." + ;; + + finish) + $echo \ + "Usage: $modename [OPTION]... --mode=finish [LIBDIR]... + + Complete the installation of libtool libraries. + + Each LIBDIR is a directory that contains libtool libraries. + + The commands that this mode executes may require superuser privileges. Use + the \`--dry-run' option if you just want to see what would be executed." + ;; + + install) + $echo \ + "Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... + + Install executables or libraries. + + INSTALL-COMMAND is the installation command. The first component should be + either the \`install' or \`cp' program. + + The rest of the components are interpreted as arguments to that command (only + BSD-compatible install options are recognized)." + ;; + + link) + $echo \ + "Usage: $modename [OPTION]... --mode=link LINK-COMMAND... + + Link object files or libraries together to form another library, or to + create an executable program. + + LINK-COMMAND is a command using the C compiler that you would use to create + a program from several object files. + + The following components of LINK-COMMAND are treated specially: + + -all-static do not do any dynamic linking at all + -avoid-version do not add a version suffix if possible + -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE + try to export only the symbols listed in SYMFILE + -export-symbols-regex REGEX + try to export only the symbols matching REGEX + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened + -no-fast-install disable the fast-install mode + -no-install link a not-installable executable + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries + -static do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] + specify library version info [each variable defaults to 0] + + All other options (arguments beginning with \`-') are ignored. + + Every other argument is treated as a filename. Files ending in \`.la' are + treated as uninstalled libtool libraries, other files are standard or library + object files. + + If the OUTPUT-FILE ends in \`.la', then a libtool library is created, + only library objects (\`.lo' files) may be specified, and \`-rpath' is + required, except when creating a convenience library. + + If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created + using \`ar' and \`ranlib', or on Windows using \`lib'. + + If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file + is created, otherwise an executable program is created." + ;; + + uninstall) + $echo \ + "Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... + + Remove libraries from an installation directory. + + RM is the name of the program to use to delete files associated with each FILE + (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed + to RM. + + If FILE is a libtool library, all the files associated with it are deleted. + Otherwise, only FILE itself is deleted using RM." + ;; + + *) + $echo "$modename: invalid operation mode \`$mode'" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; + esac + + echo + $echo "Try \`$modename --help' for more information about other modes." + + exit 0 + + # Local Variables: + # mode:shell-script + # sh-indentation:2 + # End: diff -crN ./OTHERS/fontconfig/missing /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/missing *** ./OTHERS/fontconfig/missing Thu Jan 1 01:00:00 1970 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/missing Tue Nov 15 17:05:50 2005 *************** *** 0 **** --- 1,360 ---- + #! /bin/sh + # Common stub for a few missing GNU programs while installing. + + scriptversion=2005-06-08.21 + + # Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005 + # Free Software Foundation, Inc. + # Originally by Fran,cois Pinard , 1996. + + # This program is free software; you can redistribute it and/or modify + # it under the terms of the GNU General Public License as published by + # the Free Software Foundation; either version 2, or (at your option) + # any later version. + + # This program is distributed in the hope that it will be useful, + # but WITHOUT ANY WARRANTY; without even the implied warranty of + # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + # GNU General Public License for more details. + + # You should have received a copy of the GNU General Public License + # along with this program; if not, write to the Free Software + # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + # 02110-1301, USA. + + # As a special exception to the GNU General Public License, if you + # distribute this file as part of a program that contains a + # configuration script generated by Autoconf, you may include it under + # the same distribution terms that you use for the rest of that program. + + if test $# -eq 0; then + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 + fi + + run=: + + # In the cases where this matters, `missing' is being run in the + # srcdir already. + if test -f configure.ac; then + configure_ac=configure.ac + else + configure_ac=configure.in + fi + + msg="missing on your system" + + case "$1" in + --run) + # Try to run requested program, and just exit if it succeeds. + run= + shift + "$@" && exit 0 + # Exit code 63 means version mismatch. This often happens + # when the user try to use an ancient version of a tool on + # a file that requires a minimum version. In this case we + # we should proceed has if the program had been absent, or + # if --run hadn't been passed. + if test $? = 63; then + run=: + msg="probably too old" + fi + ;; + + -h|--h|--he|--hel|--help) + echo "\ + $0 [OPTION]... PROGRAM [ARGUMENT]... + + Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an + error status if there is no known handling for PROGRAM. + + Options: + -h, --help display this help and exit + -v, --version output version information and exit + --run try to run the given command, and emulate it if it fails + + Supported PROGRAM values: + aclocal touch file \`aclocal.m4' + autoconf touch file \`configure' + autoheader touch file \`config.h.in' + automake touch all \`Makefile.in' files + bison create \`y.tab.[ch]', if possible, from existing .[ch] + flex create \`lex.yy.c', if possible, from existing .c + help2man touch the output file + lex create \`lex.yy.c', if possible, from existing .c + makeinfo touch the output file + tar try tar, gnutar, gtar, then tar without non-portable flags + yacc create \`y.tab.[ch]', if possible, from existing .[ch] + + Send bug reports to ." + exit $? + ;; + + -v|--v|--ve|--ver|--vers|--versi|--versio|--version) + echo "missing $scriptversion (GNU Automake)" + exit $? + ;; + + -*) + echo 1>&2 "$0: Unknown \`$1' option" + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 + ;; + + esac + + # Now exit if we have it, but it failed. Also exit now if we + # don't have it and --version was passed (most likely to detect + # the program). + case "$1" in + lex|yacc) + # Not GNU programs, they don't have --version. + ;; + + tar) + if test -n "$run"; then + echo 1>&2 "ERROR: \`tar' requires --run" + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + exit 1 + fi + ;; + + *) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + # Could not run --version or --help. This is probably someone + # running `$TOOL --version' or `$TOOL --help' to check whether + # $TOOL exists and not knowing $TOOL uses missing. + exit 1 + fi + ;; + esac + + # If it does not exist, or fails to run (possibly an outdated version), + # try to emulate it. + case "$1" in + aclocal*) + echo 1>&2 "\ + WARNING: \`$1' is $msg. You should only need it if + you modified \`acinclude.m4' or \`${configure_ac}'. You might want + to install the \`Automake' and \`Perl' packages. Grab them from + any GNU archive site." + touch aclocal.m4 + ;; + + autoconf) + echo 1>&2 "\ + WARNING: \`$1' is $msg. You should only need it if + you modified \`${configure_ac}'. You might want to install the + \`Autoconf' and \`GNU m4' packages. Grab them from any GNU + archive site." + touch configure + ;; + + autoheader) + echo 1>&2 "\ + WARNING: \`$1' is $msg. You should only need it if + you modified \`acconfig.h' or \`${configure_ac}'. You might want + to install the \`Autoconf' and \`GNU m4' packages. Grab them + from any GNU archive site." + files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` + test -z "$files" && files="config.h" + touch_files= + for f in $files; do + case "$f" in + *:*) touch_files="$touch_files "`echo "$f" | + sed -e 's/^[^:]*://' -e 's/:.*//'`;; + *) touch_files="$touch_files $f.in";; + esac + done + touch $touch_files + ;; + + automake*) + echo 1>&2 "\ + WARNING: \`$1' is $msg. You should only need it if + you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. + You might want to install the \`Automake' and \`Perl' packages. + Grab them from any GNU archive site." + find . -type f -name Makefile.am -print | + sed 's/\.am$/.in/' | + while read f; do touch "$f"; done + ;; + + autom4te) + echo 1>&2 "\ + WARNING: \`$1' is needed, but is $msg. + You might have modified some files without having the + proper tools for further handling them. + You can get \`$1' as part of \`Autoconf' from any GNU + archive site." + + file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` + test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo "#! /bin/sh" + echo "# Created by GNU Automake missing as a replacement of" + echo "# $ $@" + echo "exit 0" + chmod +x $file + exit 1 + fi + ;; + + bison|yacc) + echo 1>&2 "\ + WARNING: \`$1' $msg. You should only need it if + you modified a \`.y' file. You may need the \`Bison' package + in order for those modifications to take effect. You can get + \`Bison' from any GNU archive site." + rm -f y.tab.c y.tab.h + if [ $# -ne 1 ]; then + eval LASTARG="\${$#}" + case "$LASTARG" in + *.y) + SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" y.tab.c + fi + SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" y.tab.h + fi + ;; + esac + fi + if [ ! -f y.tab.h ]; then + echo >y.tab.h + fi + if [ ! -f y.tab.c ]; then + echo 'main() { return 0; }' >y.tab.c + fi + ;; + + lex|flex) + echo 1>&2 "\ + WARNING: \`$1' is $msg. You should only need it if + you modified a \`.l' file. You may need the \`Flex' package + in order for those modifications to take effect. You can get + \`Flex' from any GNU archive site." + rm -f lex.yy.c + if [ $# -ne 1 ]; then + eval LASTARG="\${$#}" + case "$LASTARG" in + *.l) + SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" lex.yy.c + fi + ;; + esac + fi + if [ ! -f lex.yy.c ]; then + echo 'main() { return 0; }' >lex.yy.c + fi + ;; + + help2man) + echo 1>&2 "\ + WARNING: \`$1' is $msg. You should only need it if + you modified a dependency of a manual page. You may need the + \`Help2man' package in order for those modifications to take + effect. You can get \`Help2man' from any GNU archive site." + + file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + if test -z "$file"; then + file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` + fi + if [ -f "$file" ]; then + touch $file + else + test -z "$file" || exec >$file + echo ".ab help2man is required to generate this page" + exit 1 + fi + ;; + + makeinfo) + echo 1>&2 "\ + WARNING: \`$1' is $msg. You should only need it if + you modified a \`.texi' or \`.texinfo' file, or any other file + indirectly affecting the aspect of the manual. The spurious + call might also be the consequence of using a buggy \`make' (AIX, + DU, IRIX). You might want to install the \`Texinfo' package or + the \`GNU make' package. Grab either from any GNU archive site." + # The file to touch is that specified with -o ... + file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + if test -z "$file"; then + # ... or it is the one specified with @setfilename ... + infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` + file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile` + # ... or it is derived from the source name (dir/f.texi becomes f.info) + test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info + fi + # If the file does not exist, the user really needs makeinfo; + # let's fail without touching anything. + test -f $file || exit 1 + touch $file + ;; + + tar) + shift + + # We have already tried tar in the generic part. + # Look for gnutar/gtar before invocation to avoid ugly error + # messages. + if (gnutar --version > /dev/null 2>&1); then + gnutar "$@" && exit 0 + fi + if (gtar --version > /dev/null 2>&1); then + gtar "$@" && exit 0 + fi + firstarg="$1" + if shift; then + case "$firstarg" in + *o*) + firstarg=`echo "$firstarg" | sed s/o//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + case "$firstarg" in + *h*) + firstarg=`echo "$firstarg" | sed s/h//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + fi + + echo 1>&2 "\ + WARNING: I can't seem to be able to run \`tar' with the given arguments. + You may want to install GNU tar or Free paxutils, or check the + command line arguments." + exit 1 + ;; + + *) + echo 1>&2 "\ + WARNING: \`$1' is needed, and is $msg. + You might have modified some files without having the + proper tools for further handling them. Check the \`README' file, + it often tells you about the needed prerequisites for installing + this package. You may also peek at any GNU archive site, in case + some other package would contain this missing \`$1' program." + exit 1 + ;; + esac + + exit 0 + + # Local variables: + # eval: (add-hook 'write-file-hooks 'time-stamp) + # time-stamp-start: "scriptversion=" + # time-stamp-format: "%:y-%02m-%02d.%02H" + # time-stamp-end: "$" + # End: diff -crN ./OTHERS/fontconfig/src/Makefile.in /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/src/Makefile.in *** ./OTHERS/fontconfig/src/Makefile.in Thu Jan 1 01:00:00 1970 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/src/Makefile.in Tue Nov 15 17:05:58 2005 *************** *** 0 **** --- 1,526 ---- + # Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, + # 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + + # This program is distributed in the hope that it will be useful, + # but WITHOUT ANY WARRANTY, to the extent permitted by law; without + # even the implied warranty of MERCHANTABILITY or FITNESS FOR A + # PARTICULAR PURPOSE. + + @SET_MAKE@ + + + + srcdir = @srcdir@ + top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ + top_builddir = .. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c + INSTALL_HEADER = $(INSTALL_DATA) + transform = $(program_transform_name) + NORMAL_INSTALL = : + PRE_INSTALL = : + POST_INSTALL = : + NORMAL_UNINSTALL = : + PRE_UNINSTALL = : + POST_UNINSTALL = : + build_triplet = @build@ + host_triplet = @host@ + subdir = src + DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(srcdir)/fontconfig.def.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/configure.in + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(install_sh) -d + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = fontconfig.def + am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; + am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; + am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; + am__installdirs = "$(DESTDIR)$(libdir)" + libLTLIBRARIES_INSTALL = $(INSTALL) + LTLIBRARIES = $(lib_LTLIBRARIES) + am__DEPENDENCIES_1 = + libfontconfig_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \ + $(am__DEPENDENCIES_1) + am_libfontconfig_la_OBJECTS = fcatomic.lo fcblanks.lo fccache.lo \ + fccfg.lo fccharset.lo fcdbg.lo fcdefault.lo fcdir.lo \ + fcfreetype.lo fcfs.lo fcinit.lo fclang.lo fclist.lo fcmatch.lo \ + fcmatrix.lo fcname.lo fcpat.lo fcstr.lo fcxml.lo + libfontconfig_la_OBJECTS = $(am_libfontconfig_la_OBJECTS) + DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) + depcomp = + am__depfiles_maybe = + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) + LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) + CCLD = $(CC) + LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ + SOURCES = $(libfontconfig_la_SOURCES) + DIST_SOURCES = $(libfontconfig_la_SOURCES) + DATA = $(noinst_DATA) + HEADERS = $(noinst_HEADERS) + ETAGS = etags + CTAGS = ctags + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + AMDEP_FALSE = @AMDEP_FALSE@ + AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AUTOCONF = @AUTOCONF@ + AUTOHEADER = @AUTOHEADER@ + AUTOMAKE = @AUTOMAKE@ + AWK = @AWK@ + CC = @CC@ + CCDEPMODE = @CCDEPMODE@ + CFLAGS = @CFLAGS@ + CONFDIR = @CONFDIR@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DEFS = @DEFS@ + DEPDIR = @DEPDIR@ + DOCDIR = @DOCDIR@ + ECHO = @ECHO@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ + ENABLE_DOCS_FALSE = @ENABLE_DOCS_FALSE@ + ENABLE_DOCS_TRUE = @ENABLE_DOCS_TRUE@ + EXEEXT = @EXEEXT@ + EXPAT_CFLAGS = @EXPAT_CFLAGS@ + EXPAT_LIBS = @EXPAT_LIBS@ + FC_ADD_FONTS = @FC_ADD_FONTS@ + FC_DEFAULT_FONTS = @FC_DEFAULT_FONTS@ + FC_FONTDATE = @FC_FONTDATE@ + FC_FONTPATH = @FC_FONTPATH@ + FREETYPE_CFLAGS = @FREETYPE_CFLAGS@ + FREETYPE_LIBS = @FREETYPE_LIBS@ + HASDOCBOOK = @HASDOCBOOK@ + HAVE_EXPAT = @HAVE_EXPAT@ + HAVE_XMLPARSE_H = @HAVE_XMLPARSE_H@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + LDFLAGS = @LDFLAGS@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + LT_CURRENT = @LT_CURRENT@ + LT_CURRENT_MINUS_AGE = @LT_CURRENT_MINUS_AGE@ + LT_REVISION = @LT_REVISION@ + LT_VERSION_INFO = @LT_VERSION_INFO@ + MAKEINFO = @MAKEINFO@ + MS_LIB_AVAILABLE_FALSE = @MS_LIB_AVAILABLE_FALSE@ + MS_LIB_AVAILABLE_TRUE = @MS_LIB_AVAILABLE_TRUE@ + OBJEXT = @OBJEXT@ + ORTH_FILES = @ORTH_FILES@ + OS_WIN32_FALSE = @OS_WIN32_FALSE@ + OS_WIN32_TRUE = @OS_WIN32_TRUE@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + RANLIB = @RANLIB@ + SET_MAKE = @SET_MAKE@ + SHELL = @SHELL@ + STRIP = @STRIP@ + VERSION = @VERSION@ + ac_ct_CC = @ac_ct_CC@ + ac_ct_RANLIB = @ac_ct_RANLIB@ + ac_ct_STRIP = @ac_ct_STRIP@ + am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ + am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ + am__tar = @am__tar@ + am__untar = @am__untar@ + bindir = @bindir@ + build = @build@ + build_alias = @build_alias@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ + confdir = @confdir@ + datadir = @datadir@ + exec_prefix = @exec_prefix@ + ft_config = @ft_config@ + host = @host@ + host_alias = @host_alias@ + host_cpu = @host_cpu@ + host_os = @host_os@ + host_vendor = @host_vendor@ + includedir = @includedir@ + infodir = @infodir@ + install_sh = @install_sh@ + libdir = @libdir@ + libexecdir = @libexecdir@ + localstatedir = @localstatedir@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + ms_librarian = @ms_librarian@ + oldincludedir = @oldincludedir@ + prefix = @prefix@ + program_transform_name = @program_transform_name@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ + @OS_WIN32_TRUE@no_undefined = -no-undefined + @OS_WIN32_TRUE@export_symbols = -export-symbols fontconfig.def + + # Microsoft import library install/uninstall + @MS_LIB_AVAILABLE_TRUE@noinst_DATA = fontconfig.lib + INCLUDES = \ + $(FREETYPE_CFLAGS) \ + $(EXPAT_CFLAGS) \ + -DFONTCONFIG_PATH='"$(CONFDIR)"' \ + -I$(top_srcdir) \ + -I$(top_srcdir)/src + + EXTRA_DIST = fontconfig.def.in + noinst_HEADERS = fcint.h + libfontconfig_la_SOURCES = \ + fcatomic.c \ + fcblanks.c \ + fccache.c \ + fccfg.c \ + fccharset.c \ + fcdbg.c \ + fcdefault.c \ + fcdir.c \ + fcfreetype.c \ + fcfs.c \ + fcinit.c \ + fclang.c \ + fclist.c \ + fcmatch.c \ + fcmatrix.c \ + fcname.c \ + fcpat.c \ + fcstr.c \ + fcxml.c + + lib_LTLIBRARIES = libfontconfig.la + libfontconfig_la_LDFLAGS = \ + -version-info @LT_VERSION_INFO@ $(no_undefined) $(export_symbols) + + libfontconfig_la_LIBADD = $(FREETYPE_LIBS) $(EXPAT_LIBS) + all: all-am + + .SUFFIXES: + .SUFFIXES: .c .lo .o .obj + $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu --ignore-deps src/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu --ignore-deps src/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + + $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + + $(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + fontconfig.def: $(top_builddir)/config.status $(srcdir)/fontconfig.def.in + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ + install-libLTLIBRARIES: $(lib_LTLIBRARIES) + @$(NORMAL_INSTALL) + test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)" + @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + if test -f $$p; then \ + f=$(am__strip_dir) \ + echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \ + $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \ + else :; fi; \ + done + + uninstall-libLTLIBRARIES: + @$(NORMAL_UNINSTALL) + @set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + p=$(am__strip_dir) \ + echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \ + $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \ + done + + clean-libLTLIBRARIES: + -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) + @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ + test "$$dir" != "$$p" || dir=.; \ + echo "rm -f \"$${dir}/so_locations\""; \ + rm -f "$${dir}/so_locations"; \ + done + libfontconfig.la: $(libfontconfig_la_OBJECTS) $(libfontconfig_la_DEPENDENCIES) + $(LINK) -rpath $(libdir) $(libfontconfig_la_LDFLAGS) $(libfontconfig_la_OBJECTS) $(libfontconfig_la_LIBADD) $(LIBS) + + mostlyclean-compile: + -rm -f *.$(OBJEXT) + + distclean-compile: + -rm -f *.tab.c + + .c.o: + $(COMPILE) -c $< + + .c.obj: + $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: + $(LTCOMPILE) -c -o $@ $< + + mostlyclean-libtool: + -rm -f *.lo + + clean-libtool: + -rm -rf .libs _libs + + distclean-libtool: + -rm -f libtool + uninstall-info-am: + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + mkid -fID $$unique + tags: TAGS + + TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi + ctags: CTAGS + CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ + list='$(DISTFILES)'; for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ + esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkdir_p) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + check-am: all-am + check: check-am + all-am: Makefile $(LTLIBRARIES) $(DATA) $(HEADERS) + installdirs: + for dir in "$(DESTDIR)$(libdir)"; do \ + test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: install-am + install-exec: install-exec-am + install-data: install-data-am + uninstall: uninstall-am + + install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + + installcheck: installcheck-am + install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + mostlyclean-generic: + + clean-generic: + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + clean: clean-am + + clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \ + mostlyclean-am + + distclean: distclean-am + -rm -f Makefile + distclean-am: clean-am distclean-compile distclean-generic \ + distclean-libtool distclean-tags + + dvi: dvi-am + + dvi-am: + + html: html-am + + info: info-am + + info-am: + + install-data-am: install-data-local + + install-exec-am: install-libLTLIBRARIES + + install-info: install-info-am + + install-man: + + installcheck-am: + + maintainer-clean: maintainer-clean-am + -rm -f Makefile + maintainer-clean-am: distclean-am maintainer-clean-generic + + mostlyclean: mostlyclean-am + + mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + + pdf: pdf-am + + pdf-am: + + ps: ps-am + + ps-am: + + uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES \ + uninstall-local + + .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ + clean-libLTLIBRARIES clean-libtool ctags distclean \ + distclean-compile distclean-generic distclean-libtool \ + distclean-tags distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am \ + install-data-local install-exec install-exec-am install-info \ + install-info-am install-libLTLIBRARIES install-man \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ + pdf pdf-am ps ps-am tags uninstall uninstall-am \ + uninstall-info-am uninstall-libLTLIBRARIES uninstall-local + + + # gcc import library install/uninstall + + @OS_WIN32_TRUE@install-libtool-import-lib: + @OS_WIN32_TRUE@ $(INSTALL) .libs/libfontconfig.dll.a $(DESTDIR)$(libdir) + @OS_WIN32_TRUE@ $(INSTALL) fontconfig.def $(DESTDIR)$(libdir)/glib-2.0.def + + @OS_WIN32_TRUE@uninstall-libtool-import-lib: + @OS_WIN32_TRUE@ -rm $(DESTDIR)$(libdir)/libfontconfig.dll.a $(DESTDIR)$(libdir)/fontconfig.def + + @OS_WIN32_FALSE@install-libtool-import-lib: + @OS_WIN32_FALSE@uninstall-libtool-import-lib: + + @MS_LIB_AVAILABLE_TRUE@fontconfig.lib : libfontconfig.la + @MS_LIB_AVAILABLE_TRUE@ lib -name:libfontconfig-$(lt_current_minus_age).dll -def:fontconfig.def -out:$@ + + @MS_LIB_AVAILABLE_TRUE@install-ms-import-lib: + @MS_LIB_AVAILABLE_TRUE@ $(INSTALL) fontconfig.lib $(DESTDIR)$(libdir) + + @MS_LIB_AVAILABLE_TRUE@uninstall-ms-import-lib: + @MS_LIB_AVAILABLE_TRUE@ -rm $(DESTDIR)$(libdir)/fontconfig.lib + + @MS_LIB_AVAILABLE_FALSE@install-ms-import-lib: + @MS_LIB_AVAILABLE_FALSE@uninstall-ms-import-lib: + + install-data-local: install-ms-import-lib install-libtool-import-lib + + uninstall-local: uninstall-ms-import-lib uninstall-libtool-import-lib + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: diff -crN ./OTHERS/fontconfig/test/Makefile.in /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/test/Makefile.in *** ./OTHERS/fontconfig/test/Makefile.in Thu Jan 1 01:00:00 1970 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./OTHERS/fontconfig/test/Makefile.in Tue Nov 15 17:05:59 2005 *************** *** 0 **** --- 1,405 ---- + # Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, + # 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + + # This program is distributed in the hope that it will be useful, + # but WITHOUT ANY WARRANTY, to the extent permitted by law; without + # even the implied warranty of MERCHANTABILITY or FITNESS FOR A + # PARTICULAR PURPOSE. + + @SET_MAKE@ + srcdir = @srcdir@ + top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ + top_builddir = .. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c + INSTALL_HEADER = $(INSTALL_DATA) + transform = $(program_transform_name) + NORMAL_INSTALL = : + PRE_INSTALL = : + POST_INSTALL = : + NORMAL_UNINSTALL = : + PRE_UNINSTALL = : + POST_UNINSTALL = : + build_triplet = @build@ + host_triplet = @host@ + subdir = test + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/configure.in + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(install_sh) -d + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = + depcomp = + am__depfiles_maybe = + SOURCES = + DIST_SOURCES = + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + AMDEP_FALSE = @AMDEP_FALSE@ + AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AUTOCONF = @AUTOCONF@ + AUTOHEADER = @AUTOHEADER@ + AUTOMAKE = @AUTOMAKE@ + AWK = @AWK@ + CC = @CC@ + CCDEPMODE = @CCDEPMODE@ + CFLAGS = @CFLAGS@ + CONFDIR = @CONFDIR@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DEFS = @DEFS@ + DEPDIR = @DEPDIR@ + DOCDIR = @DOCDIR@ + ECHO = @ECHO@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ + ENABLE_DOCS_FALSE = @ENABLE_DOCS_FALSE@ + ENABLE_DOCS_TRUE = @ENABLE_DOCS_TRUE@ + EXEEXT = @EXEEXT@ + EXPAT_CFLAGS = @EXPAT_CFLAGS@ + EXPAT_LIBS = @EXPAT_LIBS@ + FC_ADD_FONTS = @FC_ADD_FONTS@ + FC_DEFAULT_FONTS = @FC_DEFAULT_FONTS@ + FC_FONTDATE = @FC_FONTDATE@ + FC_FONTPATH = @FC_FONTPATH@ + FREETYPE_CFLAGS = @FREETYPE_CFLAGS@ + FREETYPE_LIBS = @FREETYPE_LIBS@ + HASDOCBOOK = @HASDOCBOOK@ + HAVE_EXPAT = @HAVE_EXPAT@ + HAVE_XMLPARSE_H = @HAVE_XMLPARSE_H@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + LDFLAGS = @LDFLAGS@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + LT_CURRENT = @LT_CURRENT@ + LT_CURRENT_MINUS_AGE = @LT_CURRENT_MINUS_AGE@ + LT_REVISION = @LT_REVISION@ + LT_VERSION_INFO = @LT_VERSION_INFO@ + MAKEINFO = @MAKEINFO@ + MS_LIB_AVAILABLE_FALSE = @MS_LIB_AVAILABLE_FALSE@ + MS_LIB_AVAILABLE_TRUE = @MS_LIB_AVAILABLE_TRUE@ + OBJEXT = @OBJEXT@ + ORTH_FILES = @ORTH_FILES@ + OS_WIN32_FALSE = @OS_WIN32_FALSE@ + OS_WIN32_TRUE = @OS_WIN32_TRUE@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + RANLIB = @RANLIB@ + SET_MAKE = @SET_MAKE@ + SHELL = @SHELL@ + STRIP = @STRIP@ + VERSION = @VERSION@ + ac_ct_CC = @ac_ct_CC@ + ac_ct_RANLIB = @ac_ct_RANLIB@ + ac_ct_STRIP = @ac_ct_STRIP@ + am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ + am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ + am__tar = @am__tar@ + am__untar = @am__untar@ + bindir = @bindir@ + build = @build@ + build_alias = @build_alias@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ + confdir = @confdir@ + datadir = @datadir@ + exec_prefix = @exec_prefix@ + ft_config = @ft_config@ + host = @host@ + host_alias = @host_alias@ + host_cpu = @host_cpu@ + host_os = @host_os@ + host_vendor = @host_vendor@ + includedir = @includedir@ + infodir = @infodir@ + install_sh = @install_sh@ + libdir = @libdir@ + libexecdir = @libexecdir@ + localstatedir = @localstatedir@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + ms_librarian = @ms_librarian@ + oldincludedir = @oldincludedir@ + prefix = @prefix@ + program_transform_name = @program_transform_name@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ + check_SCRIPTS = run-test.sh + TESTS_ENVIRONMENT = sh + TESTS = run-test.sh + TESTDATA = 4x6.pcf 8x16.pcf out.expected fonts.conf.in + EXTRA_DIST = $(check_SCRIPTS) $(TESTDATA) + all: all-am + + .SUFFIXES: + $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu --ignore-deps test/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu --ignore-deps test/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + + $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + + $(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + + mostlyclean-libtool: + -rm -f *.lo + + clean-libtool: + -rm -rf .libs _libs + + distclean-libtool: + -rm -f libtool + uninstall-info-am: + tags: TAGS + TAGS: + + ctags: CTAGS + CTAGS: + + + check-TESTS: $(TESTS) + @failed=0; all=0; xfail=0; xpass=0; skip=0; \ + srcdir=$(srcdir); export srcdir; \ + list='$(TESTS)'; \ + if test -n "$$list"; then \ + for tst in $$list; do \ + if test -f ./$$tst; then dir=./; \ + elif test -f $$tst; then dir=; \ + else dir="$(srcdir)/"; fi; \ + if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \ + all=`expr $$all + 1`; \ + case " $(XFAIL_TESTS) " in \ + *" $$tst "*) \ + xpass=`expr $$xpass + 1`; \ + failed=`expr $$failed + 1`; \ + echo "XPASS: $$tst"; \ + ;; \ + *) \ + echo "PASS: $$tst"; \ + ;; \ + esac; \ + elif test $$? -ne 77; then \ + all=`expr $$all + 1`; \ + case " $(XFAIL_TESTS) " in \ + *" $$tst "*) \ + xfail=`expr $$xfail + 1`; \ + echo "XFAIL: $$tst"; \ + ;; \ + *) \ + failed=`expr $$failed + 1`; \ + echo "FAIL: $$tst"; \ + ;; \ + esac; \ + else \ + skip=`expr $$skip + 1`; \ + echo "SKIP: $$tst"; \ + fi; \ + done; \ + if test "$$failed" -eq 0; then \ + if test "$$xfail" -eq 0; then \ + banner="All $$all tests passed"; \ + else \ + banner="All $$all tests behaved as expected ($$xfail expected failures)"; \ + fi; \ + else \ + if test "$$xpass" -eq 0; then \ + banner="$$failed of $$all tests failed"; \ + else \ + banner="$$failed of $$all tests did not behave as expected ($$xpass unexpected passes)"; \ + fi; \ + fi; \ + dashes="$$banner"; \ + skipped=""; \ + if test "$$skip" -ne 0; then \ + skipped="($$skip tests were not run)"; \ + test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \ + dashes="$$skipped"; \ + fi; \ + report=""; \ + if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \ + report="Please report to $(PACKAGE_BUGREPORT)"; \ + test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \ + dashes="$$report"; \ + fi; \ + dashes=`echo "$$dashes" | sed s/./=/g`; \ + echo "$$dashes"; \ + echo "$$banner"; \ + test -z "$$skipped" || echo "$$skipped"; \ + test -z "$$report" || echo "$$report"; \ + echo "$$dashes"; \ + test "$$failed" -eq 0; \ + else :; fi + + distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ + list='$(DISTFILES)'; for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ + esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkdir_p) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + check-am: all-am + $(MAKE) $(AM_MAKEFLAGS) $(check_SCRIPTS) + $(MAKE) $(AM_MAKEFLAGS) check-TESTS + check: check-am + all-am: Makefile + installdirs: + install: install-am + install-exec: install-exec-am + install-data: install-data-am + uninstall: uninstall-am + + install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + + installcheck: installcheck-am + install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + mostlyclean-generic: + + clean-generic: + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + clean: clean-am + + clean-am: clean-generic clean-libtool mostlyclean-am + + distclean: distclean-am + -rm -f Makefile + distclean-am: clean-am distclean-generic distclean-libtool + + dvi: dvi-am + + dvi-am: + + html: html-am + + info: info-am + + info-am: + + install-data-am: + + install-exec-am: + + install-info: install-info-am + + install-man: + + installcheck-am: + + maintainer-clean: maintainer-clean-am + -rm -f Makefile + maintainer-clean-am: distclean-am maintainer-clean-generic + + mostlyclean: mostlyclean-am + + mostlyclean-am: mostlyclean-generic mostlyclean-libtool + + pdf: pdf-am + + pdf-am: + + ps: ps-am + + ps-am: + + uninstall-am: uninstall-info-am + + .PHONY: all all-am check check-TESTS check-am clean clean-generic \ + clean-libtool distclean distclean-generic distclean-libtool \ + distdir dvi dvi-am html html-am info info-am install \ + install-am install-data install-data-am install-exec \ + install-exec-am install-info install-info-am install-man \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + uninstall uninstall-am uninstall-info-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: