diff -crN ./acme/Makefile.in /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./acme/Makefile.in *** ./acme/Makefile.in Sun Feb 2 01:33:24 2003 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./acme/Makefile.in Sun Aug 10 00:04:04 2003 *************** *** 1,6 **** ! # Makefile.in generated automatically by automake 1.4-p6 from Makefile.am ! # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. --- 1,7 ---- ! # Makefile.in generated automatically by automake 1.5 from Makefile.am. ! # Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 ! # Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. *************** *** 10,15 **** --- 11,17 ---- # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. + @SET_MAKE@ SHELL = @SHELL@ *************** *** 31,43 **** mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include - - DESTDIR = - pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ - top_builddir = . ACLOCAL = @ACLOCAL@ --- 33,41 ---- *************** *** 46,56 **** AUTOHEADER = @AUTOHEADER@ INSTALL = @INSTALL@ ! INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ transform = @program_transform_name@ - NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : --- 44,54 ---- AUTOHEADER = @AUTOHEADER@ INSTALL = @INSTALL@ ! INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ + INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : *************** *** 59,68 **** --- 57,70 ---- POST_UNINSTALL = : ALSA_CFLAGS = @ALSA_CFLAGS@ ALSA_LIBS = @ALSA_LIBS@ + AMTAR = @AMTAR@ + AWK = @AWK@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ DATADIRNAME = @DATADIRNAME@ + DEPDIR = @DEPDIR@ + EXEEXT = @EXEEXT@ EXTRA_GNOME_CFLAGS = @EXTRA_GNOME_CFLAGS@ EXTRA_GNOME_LIBS = @EXTRA_GNOME_LIBS@ GCONFTOOL = @GCONFTOOL@ *************** *** 72,77 **** --- 74,80 ---- GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GOB2 = @GOB2@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ *************** *** 92,99 **** INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ - MAKEINFO = @MAKEINFO@ MKINSTALLDIRS = @MKINSTALLDIRS@ PACKAGE = @PACKAGE@ PKG_CONFIG = @PKG_CONFIG@ POFILES = @POFILES@ --- 95,102 ---- INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ MKINSTALLDIRS = @MKINSTALLDIRS@ + OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PKG_CONFIG = @PKG_CONFIG@ POFILES = @POFILES@ *************** *** 102,173 **** PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ SUBDIRS = po src ! EXTRA_DIST = autogen.sh intltool-extract.in intltool-merge.in intltool-update.in AUTHORS acme.spec.in acme.spec CLEANFILES = acme.spec ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = config.h ! CONFIG_CLEAN_FILES = acme.spec ! DIST_COMMON = README ./stamp-h.in AUTHORS COPYING ChangeLog INSTALL \ ! Makefile.am Makefile.in NEWS aclocal.m4 acme.spec.in config.h.in \ ! configure configure.in install-sh missing mkinstalldirs ! ! ! DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) - TAR = tar - GZIP_ENV = --best - all: all-redirect .SUFFIXES: ! $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) ! cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps Makefile ! ! Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status ! cd $(top_builddir) \ ! && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status ! $(ACLOCAL_M4): configure.in ! cd $(srcdir) && $(ACLOCAL) ! ! config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck ! $(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) cd $(srcdir) && $(AUTOCONF) config.h: stamp-h @if test ! -f $@; then \ rm -f stamp-h; \ $(MAKE) stamp-h; \ else :; fi stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES= CONFIG_HEADERS=config.h \ $(SHELL) ./config.status ! @echo timestamp > stamp-h 2> /dev/null ! $(srcdir)/config.h.in: $(srcdir)/stamp-h.in @if test ! -f $@; then \ ! rm -f $(srcdir)/stamp-h.in; \ ! $(MAKE) $(srcdir)/stamp-h.in; \ else :; fi ! $(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) cd $(top_srcdir) && $(AUTOHEADER) ! @echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null ! ! mostlyclean-hdr: ! ! clean-hdr: distclean-hdr: -rm -f config.h - - maintainer-clean-hdr: acme.spec: $(top_builddir)/config.status acme.spec.in ! cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. --- 105,195 ---- PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ + X_CFLAGS = @X_CFLAGS@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ + am__include = @am__include@ + am__quote = @am__quote@ + install_sh = @install_sh@ SUBDIRS = po src ! EXTRA_DIST = \ ! autogen.sh \ ! intltool-extract.in \ ! intltool-merge.in \ ! intltool-update.in \ ! AUTHORS \ ! acme.spec.in \ ! acme.spec CLEANFILES = acme.spec + subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = config.h ! CONFIG_CLEAN_FILES = acme.spec ! depcomp = ! DIST_SOURCES = ! ! RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \ ! uninstall-info-recursive all-recursive install-data-recursive \ ! install-exec-recursive installdirs-recursive install-recursive \ ! uninstall-recursive check-recursive installcheck-recursive ! DIST_COMMON = README ./stamp-h.in AUTHORS COPYING ChangeLog INSTALL \ ! Makefile.am Makefile.in NEWS aclocal.m4 acme.spec.in \ ! config.guess config.h.in config.sub configure configure.in \ ! install-sh ltmain.sh missing mkinstalldirs ! DIST_SUBDIRS = $(SUBDIRS) ! all: config.h ! $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: ! $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) ! cd $(top_srcdir) && \ ! $(AUTOMAKE) --gnu --ignore-deps Makefile ! Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status ! cd $(top_builddir) && \ ! CONFIG_HEADERS= CONFIG_LINKS= \ ! CONFIG_FILES=$@ $(SHELL) ./config.status ! $(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck ! $(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) cd $(srcdir) && $(AUTOCONF) + $(ACLOCAL_M4): configure.in + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) config.h: stamp-h @if test ! -f $@; then \ rm -f stamp-h; \ $(MAKE) stamp-h; \ else :; fi stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status + @rm -f stamp-h stamp-hT + @echo timestamp > stamp-hT 2> /dev/null cd $(top_builddir) \ && CONFIG_FILES= CONFIG_HEADERS=config.h \ $(SHELL) ./config.status ! @mv stamp-hT stamp-h ! $(srcdir)/config.h.in: $(srcdir)/./stamp-h.in @if test ! -f $@; then \ ! rm -f $(srcdir)/./stamp-h.in; \ ! $(MAKE) $(srcdir)/./stamp-h.in; \ else :; fi ! $(srcdir)/./stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) ! @rm -f $(srcdir)/./stamp-h.in $(srcdir)/./stamp-h.inT ! @echo timestamp > $(srcdir)/./stamp-h.inT 2> /dev/null cd $(top_srcdir) && $(AUTOHEADER) ! @mv $(srcdir)/./stamp-h.inT $(srcdir)/./stamp-h.in distclean-hdr: -rm -f config.h acme.spec: $(top_builddir)/config.status acme.spec.in ! cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= CONFIG_LINKS= $(SHELL) ./config.status ! uninstall-info-am: # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. *************** *** 175,186 **** # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. ! ! @SET_MAKE@ ! ! all-recursive install-data-recursive install-exec-recursive \ ! installdirs-recursive install-recursive uninstall-recursive \ ! check-recursive installcheck-recursive info-recursive dvi-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ --- 197,203 ---- # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. ! $(RECURSIVE_TARGETS): @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ *************** *** 203,213 **** maintainer-clean-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ ! rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ ! rev="$$subdir $$rev"; \ ! test "$$subdir" != "." || dot_seen=yes; \ done; \ ! test "$$dot_seen" = "no" && rev=". $$rev"; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ --- 220,235 ---- maintainer-clean-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ ! case "$@" in \ ! distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ ! *) list='$(SUBDIRS)' ;; \ ! esac; \ ! rev=''; for subdir in $$list; do \ ! if test "$$subdir" = "."; then :; else \ ! rev="$$subdir $$rev"; \ ! fi; \ done; \ ! rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ *************** *** 226,309 **** tags: TAGS ! ID: $(HEADERS) $(SOURCES) $(LISP) ! list='$(SOURCES) $(HEADERS)'; \ ! unique=`for i in $$list; do echo $$i; done | \ ! awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ ! here=`pwd` && cd $(srcdir) \ ! && mkid -f$$here/ID $$unique $(LISP) ! TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ ! if test "$$subdir" = .; then :; else \ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ ! fi; \ done; \ ! list='$(SOURCES) $(HEADERS)'; \ ! unique=`for i in $$list; do echo $$i; done | \ ! awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \ ! || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP)) ! ! mostlyclean-tags: ! clean-tags: distclean-tags: ! -rm -f TAGS ID ! maintainer-clean-tags: distdir = $(PACKAGE)-$(VERSION) - top_distdir = $(distdir) ! # This target untars the dist file and tries a VPATH configuration. Then ! # it guarantees that the distribution is self-contained by making another ! # tarfile. ! distcheck: dist ! -rm -rf $(distdir) ! GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz ! mkdir $(distdir)/=build ! mkdir $(distdir)/=inst ! dc_install_base=`cd $(distdir)/=inst && pwd`; \ ! cd $(distdir)/=build \ ! && ../configure --srcdir=.. --prefix=$$dc_install_base \ ! && $(MAKE) $(AM_MAKEFLAGS) \ ! && $(MAKE) $(AM_MAKEFLAGS) dvi \ ! && $(MAKE) $(AM_MAKEFLAGS) check \ ! && $(MAKE) $(AM_MAKEFLAGS) install \ ! && $(MAKE) $(AM_MAKEFLAGS) installcheck \ ! && $(MAKE) $(AM_MAKEFLAGS) dist ! -rm -rf $(distdir) ! @banner="$(distdir).tar.gz is ready for distribution"; \ ! dashes=`echo "$$banner" | sed s/./=/g`; \ ! echo "$$dashes"; \ ! echo "$$banner"; \ ! echo "$$dashes" ! dist: distdir ! -chmod -R a+r $(distdir) ! GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) ! -rm -rf $(distdir) ! dist-all: distdir ! -chmod -R a+r $(distdir) ! GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) ! -rm -rf $(distdir) distdir: $(DISTFILES) ! -rm -rf $(distdir) mkdir $(distdir) ! -chmod 777 $(distdir) @for file in $(DISTFILES); do \ ! d=$(srcdir); \ if test -d $$d/$$file; then \ ! cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ ! || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ ! || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done for subdir in $(SUBDIRS); do \ --- 248,313 ---- tags: TAGS ! ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) ! list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \ ! unique=`for i in $$list; do \ ! if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ! done | \ ! $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ ! mkid -fID $$unique $(LISP) ! TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ ! $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ ! if test "$$subdir" = .; then :; else \ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ ! fi; \ done; \ ! list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \ ! unique=`for i in $$list; do \ ! if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ! done | \ ! $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \ ! || etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) ! GTAGS: ! here=`CDPATH=: && cd $(top_builddir) && pwd` \ ! && cd $(top_srcdir) \ ! && gtags -i $(GTAGS_ARGS) $$here distclean-tags: ! -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH ! DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + top_distdir = . + # Avoid unsightly `./'. distdir = $(PACKAGE)-$(VERSION) ! GZIP_ENV = --best ! distdir: $(DISTFILES) ! -chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir) mkdir $(distdir) ! $(mkinstalldirs) $(distdir)/. $(distdir)/po @for file in $(DISTFILES); do \ ! if test -f $$file; then d=.; else d=$(srcdir); fi; \ ! dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ! if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ! $(mkinstalldirs) "$(distdir)/$$dir"; \ ! fi; \ if test -d $$d/$$file; then \ ! cp -pR $$d/$$file $(distdir) \ ! || exit 1; \ else \ test -f $(distdir)/$$file \ ! || cp -p $$d/$$file $(distdir)/$$file \ ! || exit 1; \ fi; \ done for subdir in $(SUBDIRS); do \ *************** *** 311,400 **** test -d $(distdir)/$$subdir \ || mkdir $(distdir)/$$subdir \ || exit 1; \ ! chmod 777 $(distdir)/$$subdir; \ ! (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \ || exit 1; \ fi; \ done ! info-am: ! info: info-recursive ! dvi-am: ! dvi: dvi-recursive check-am: all-am check: check-recursive ! installcheck-am: ! installcheck: installcheck-recursive ! all-recursive-am: config.h ! $(MAKE) $(AM_MAKEFLAGS) all-recursive ! install-exec-am: install-exec: install-exec-recursive - - install-data-am: install-data-local install-data: install-data-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - install: install-recursive - uninstall-am: - uninstall: uninstall-recursive - all-am: Makefile config.h - all-redirect: all-recursive-am - install-strip: - $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install - installdirs: installdirs-recursive - installdirs-am: - mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: ! -rm -f Makefile $(CONFIG_CLEAN_FILES) ! -rm -f config.cache config.log stamp-h stamp-h[0-9]* maintainer-clean-generic: ! mostlyclean-am: mostlyclean-hdr mostlyclean-tags mostlyclean-generic ! mostlyclean: mostlyclean-recursive ! clean-am: clean-hdr clean-tags clean-generic mostlyclean-am ! clean: clean-recursive ! distclean-am: distclean-hdr distclean-tags distclean-generic clean-am ! distclean: distclean-recursive ! -rm -f config.status ! maintainer-clean-am: maintainer-clean-hdr maintainer-clean-tags \ ! maintainer-clean-generic distclean-am ! @echo "This command is intended for maintainers to use;" ! @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-recursive - -rm -f config.status ! .PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \ ! install-data-recursive uninstall-data-recursive install-exec-recursive \ ! uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \ ! all-recursive check-recursive installcheck-recursive info-recursive \ ! dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \ ! maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ ! distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ ! dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \ ! install-exec-am install-exec install-data-local install-data-am \ ! install-data install-am install uninstall-am uninstall all-redirect \ ! all-am all installdirs-am installdirs mostlyclean-generic \ ! distclean-generic clean-generic maintainer-clean-generic clean \ ! mostlyclean distclean maintainer-clean install-data-local: @$(NORMAL_INSTALL) - # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: --- 315,458 ---- test -d $(distdir)/$$subdir \ || mkdir $(distdir)/$$subdir \ || exit 1; \ ! (cd $$subdir && \ ! $(MAKE) $(AM_MAKEFLAGS) \ ! top_distdir="$(top_distdir)" \ ! distdir=../$(distdir)/$$subdir \ ! distdir) \ || exit 1; \ fi; \ done ! -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ ! ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ ! || chmod -R a+r $(distdir) ! dist: distdir ! $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz ! -chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir) ! ! # This target untars the dist file and tries a VPATH configuration. Then ! # it guarantees that the distribution is self-contained by making another ! # tarfile. ! distcheck: dist ! -chmod -R a+w $(distdir) > /dev/null 2>&1; rm -rf $(distdir) ! GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ! chmod -R a-w $(distdir); chmod a+w $(distdir) ! mkdir $(distdir)/=build ! mkdir $(distdir)/=inst ! chmod a-w $(distdir) ! dc_install_base=`CDPATH=: && cd $(distdir)/=inst && pwd` \ ! && cd $(distdir)/=build \ ! && ../configure --srcdir=.. --prefix=$$dc_install_base \ ! && $(MAKE) $(AM_MAKEFLAGS) \ ! && $(MAKE) $(AM_MAKEFLAGS) dvi \ ! && $(MAKE) $(AM_MAKEFLAGS) check \ ! && $(MAKE) $(AM_MAKEFLAGS) install \ ! && $(MAKE) $(AM_MAKEFLAGS) installcheck \ ! && $(MAKE) $(AM_MAKEFLAGS) uninstall \ ! && (test `find $$dc_install_base -type f -print | wc -l` -le 1 \ ! || (echo "Error: files left after uninstall" 1>&2; \ ! exit 1) ) \ ! && $(MAKE) $(AM_MAKEFLAGS) dist \ ! && $(MAKE) $(AM_MAKEFLAGS) distclean \ ! && rm -f $(distdir).tar.gz \ ! && (test `find . -type f -print | wc -l` -eq 0 \ ! || (echo "Error: files left after distclean" 1>&2; \ ! exit 1) ) ! -chmod -R a+w $(distdir) > /dev/null 2>&1; rm -rf $(distdir) ! @echo "$(distdir).tar.gz is ready for distribution" | \ ! sed 'h;s/./=/g;p;x;p;x' check-am: all-am check: check-recursive ! all-am: Makefile config.h ! installdirs: installdirs-recursive ! installdirs-am: ! install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive + uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + installcheck: installcheck-recursive + install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: ! -rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]* maintainer-clean-generic: ! @echo "This command is intended for maintainers to use" ! @echo "it deletes files that may require special tools to rebuild." ! clean: clean-recursive ! clean-am: clean-generic mostlyclean-am ! dist-all: distdir ! $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz ! -chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir) ! distclean: distclean-recursive ! -rm -f config.status config.cache config.log ! distclean-am: clean-am distclean-generic distclean-hdr distclean-tags ! dvi: dvi-recursive ! dvi-am: ! info: info-recursive ! info-am: ! ! install-data-am: install-data-local ! ! install-exec-am: ! ! install-info: install-info-recursive ! ! install-man: ! ! installcheck-am: maintainer-clean: maintainer-clean-recursive ! maintainer-clean-am: distclean-am maintainer-clean-generic ! ! mostlyclean: mostlyclean-recursive ! ! mostlyclean-am: mostlyclean-generic ! ! uninstall-am: uninstall-info-am ! ! uninstall-info: uninstall-info-recursive ! ! .PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \ ! clean-generic clean-recursive dist dist-all distcheck distclean \ ! distclean-generic distclean-hdr distclean-recursive \ ! distclean-tags distdir dvi dvi-am dvi-recursive info info-am \ ! info-recursive install install-am install-data install-data-am \ ! install-data-local install-data-recursive install-exec \ ! install-exec-am install-exec-recursive install-info \ ! install-info-am install-info-recursive install-man \ ! install-recursive install-strip installcheck installcheck-am \ ! installdirs installdirs-am installdirs-recursive \ ! maintainer-clean maintainer-clean-generic \ ! maintainer-clean-recursive mostlyclean mostlyclean-generic \ ! mostlyclean-recursive tags tags-recursive uninstall \ ! uninstall-am uninstall-info-am uninstall-info-recursive \ ! uninstall-recursive install-data-local: @$(NORMAL_INSTALL) # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diff -crN ./acme/aclocal.m4 /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./acme/aclocal.m4 *** ./acme/aclocal.m4 Sat Feb 1 19:14:30 2003 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./acme/aclocal.m4 Sun Aug 10 00:03:48 2003 *************** *** 1,100 **** ! dnl aclocal.m4 generated automatically by aclocal 1.4-p6 ! dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. ! dnl This file is free software; the Free Software Foundation ! dnl gives unlimited permission to copy and/or distribute it, ! dnl with or without modifications, as long as this notice is preserved. ! ! dnl This program is distributed in the hope that it will be useful, ! dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without ! dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A ! dnl PARTICULAR PURPOSE. # Do all the work for Automake. This macro actually does too much -- # some checks are only needed if your package does certain things. # But this isn't really a big deal. ! # serial 1 - dnl Usage: - dnl AM_INIT_AUTOMAKE(package,version, [no-define]) AC_DEFUN([AM_INIT_AUTOMAKE], ! [AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl ! AC_REQUIRE([AC_PROG_INSTALL]) ! PACKAGE=[$1] ! AC_SUBST(PACKAGE) ! VERSION=[$2] ! AC_SUBST(VERSION) ! dnl test to see if srcdir already configured ! if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then ! AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi - ifelse([$3],, - AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) - AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])) - AC_REQUIRE([AM_SANITY_CHECK]) - AC_REQUIRE([AC_ARG_PROGRAM]) - dnl FIXME This is truly gross. - missing_dir=`cd $ac_aux_dir && pwd` - AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}, $missing_dir) - AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) - AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}, $missing_dir) - AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) - AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) - AC_REQUIRE([AC_PROG_MAKE_SET])]) - - # Copyright 2002 Free Software Foundation, Inc. - - # This program is free software; you can redistribute it and/or modify - # it under the terms of the GNU General Public License as published by - # the Free Software Foundation; either version 2, or (at your option) - # any later version. ! # This program is distributed in the hope that it will be useful, ! # but WITHOUT ANY WARRANTY; without even the implied warranty of ! # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ! # GNU General Public License for more details. ! ! # You should have received a copy of the GNU General Public License ! # along with this program; if not, write to the Free Software ! # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA ! ! # AM_AUTOMAKE_VERSION(VERSION) ! # ---------------------------- ! # Automake X.Y traces this macro to ensure aclocal.m4 has been ! # generated from the m4 files accompanying Automake X.Y. ! AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.4"]) ! # AM_SET_CURRENT_AUTOMAKE_VERSION ! # ------------------------------- ! # Call AM_AUTOMAKE_VERSION so it can be traced. ! # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. ! AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], ! [AM_AUTOMAKE_VERSION([1.4-p6])]) # # Check to make sure that the build environment is sane. # AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 ! echo timestamp > conftestfile # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( ! set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` ! if test "[$]*" = "X"; then # -L didn't work. ! set X `ls -t $srcdir/configure conftestfile` fi ! if test "[$]*" != "X $srcdir/configure conftestfile" \ ! && test "[$]*" != "X conftestfile $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a --- 1,133 ---- ! # aclocal.m4 generated automatically by aclocal 1.5 ! # Copyright 1996, 1997, 1998, 1999, 2000, 2001 ! # Free Software Foundation, Inc. ! # This file is free software; the Free Software Foundation ! # gives unlimited permission to copy and/or distribute it, ! # with or without modifications, as long as this notice is preserved. ! ! # This program is distributed in the hope that it will be useful, ! # but WITHOUT ANY WARRANTY, to the extent permitted by law; without ! # even the implied warranty of MERCHANTABILITY or FITNESS FOR A ! # PARTICULAR PURPOSE. # Do all the work for Automake. This macro actually does too much -- # some checks are only needed if your package does certain things. # But this isn't really a big deal. ! # serial 5 ! ! # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be ! # written in clear, in which case automake, when reading aclocal.m4, ! # will think it sees a *use*, and therefore will trigger all it's ! # C support machinery. Also note that it means that autoscan, seeing ! # CC etc. in the Makefile, will ask for an AC_PROG_CC use... ! ! ! # We require 2.13 because we rely on SHELL being computed by configure. ! AC_PREREQ([2.13]) ! ! # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) ! # ----------------------------------------------------------- ! # If MACRO-NAME is provided do IF-PROVIDED, else IF-NOT-PROVIDED. ! # The purpose of this macro is to provide the user with a means to ! # check macros which are provided without letting her know how the ! # information is coded. ! # If this macro is not defined by Autoconf, define it here. ! ifdef([AC_PROVIDE_IFELSE], ! [], ! [define([AC_PROVIDE_IFELSE], ! [ifdef([AC_PROVIDE_$1], ! [$2], [$3])])]) + # AM_INIT_AUTOMAKE(PACKAGE,VERSION, [NO-DEFINE]) + # ---------------------------------------------- AC_DEFUN([AM_INIT_AUTOMAKE], ! [AC_REQUIRE([AC_PROG_INSTALL])dnl ! # test to see if srcdir already configured ! if test "`CDPATH=:; cd $srcdir && pwd`" != "`pwd`" && ! test -f $srcdir/config.status; then ! AC_MSG_ERROR([source directory already configured; run \"make distclean\" there first]) fi ! # Define the identity of the package. ! PACKAGE=$1 ! AC_SUBST(PACKAGE)dnl ! VERSION=$2 ! AC_SUBST(VERSION)dnl ! ifelse([$3],, ! [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) ! AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])]) ! # Autoconf 2.50 wants to disallow AM_ names. We explicitly allow ! # the ones we care about. ! ifdef([m4_pattern_allow], ! [m4_pattern_allow([^AM_[A-Z]+FLAGS])])dnl ! ! # Autoconf 2.50 always computes EXEEXT. However we need to be ! # compatible with 2.13, for now. So we always define EXEEXT, but we ! # don't compute it. ! AC_SUBST(EXEEXT) ! # Similar for OBJEXT -- only we only use OBJEXT if the user actually ! # requests that it be used. This is a bit dumb. ! : ${OBJEXT=o} ! AC_SUBST(OBJEXT) ! ! # Some tools Automake needs. ! AC_REQUIRE([AM_SANITY_CHECK])dnl ! AC_REQUIRE([AC_ARG_PROGRAM])dnl ! AM_MISSING_PROG(ACLOCAL, aclocal) ! AM_MISSING_PROG(AUTOCONF, autoconf) ! AM_MISSING_PROG(AUTOMAKE, automake) ! AM_MISSING_PROG(AUTOHEADER, autoheader) ! AM_MISSING_PROG(MAKEINFO, makeinfo) ! AM_MISSING_PROG(AMTAR, tar) ! AM_PROG_INSTALL_SH ! AM_PROG_INSTALL_STRIP ! # We need awk for the "check" target. The system "awk" is bad on ! # some platforms. ! AC_REQUIRE([AC_PROG_AWK])dnl ! AC_REQUIRE([AC_PROG_MAKE_SET])dnl ! AC_REQUIRE([AM_DEP_TRACK])dnl ! AC_REQUIRE([AM_SET_DEPDIR])dnl ! AC_PROVIDE_IFELSE([AC_PROG_][CC], ! [_AM_DEPENDENCIES(CC)], ! [define([AC_PROG_][CC], ! defn([AC_PROG_][CC])[_AM_DEPENDENCIES(CC)])])dnl ! AC_PROVIDE_IFELSE([AC_PROG_][CXX], ! [_AM_DEPENDENCIES(CXX)], ! [define([AC_PROG_][CXX], ! defn([AC_PROG_][CXX])[_AM_DEPENDENCIES(CXX)])])dnl ! ]) # # Check to make sure that the build environment is sane. # + # serial 3 + + # AM_SANITY_CHECK + # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 ! echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( ! set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` ! if test "$[*]" = "X"; then # -L didn't work. ! set X `ls -t $srcdir/configure conftest.file` fi ! rm -f conftest.file ! if test "$[*]" != "X $srcdir/configure conftest.file" \ ! && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a *************** *** 104,110 **** alias in your environment]) fi ! test "[$]2" = conftestfile ) then # Ok. --- 137,143 ---- alias in your environment]) fi ! test "$[2]" = conftest.file ) then # Ok. *************** *** 113,159 **** AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi - rm -f conftest* AC_MSG_RESULT(yes)]) ! dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) ! dnl The program must properly implement --version. AC_DEFUN([AM_MISSING_PROG], ! [AC_MSG_CHECKING(for working $2) ! # Run test in a subshell; some versions of sh will print an error if ! # an executable is not found, even if stderr is redirected. ! # Redirect stdin to placate older versions of autoconf. Sigh. ! if ($2 --version) < /dev/null > /dev/null 2>&1; then ! $1=$2 ! AC_MSG_RESULT(found) else ! $1="$3/missing $2" ! AC_MSG_RESULT(missing) fi ! AC_SUBST($1)]) # Like AC_CONFIG_HEADER, but automatically create stamp file. AC_DEFUN([AM_CONFIG_HEADER], ! [AC_PREREQ([2.12]) ! AC_CONFIG_HEADER([$1]) ! dnl When config.status generates a header, we must update the stamp-h file. ! dnl This file resides in the same directory as the config header ! dnl that is generated. We must strip everything past the first ":", ! dnl and everything past the last "/". ! AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl ! ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>, ! <>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>, ! <>; do ! case " <<$>>CONFIG_HEADERS " in ! *" <<$>>am_file "*<<)>> ! echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx ;; esac ! am_indx=`expr "<<$>>am_indx" + 1` ! done<<>>dnl>>) ! changequote([,]))]) dnl AC_PROG_INTLTOOL([MINIMUM-VERSION]) --- 146,563 ---- AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT(yes)]) ! ! # serial 2 ! ! # AM_MISSING_PROG(NAME, PROGRAM) ! # ------------------------------ AC_DEFUN([AM_MISSING_PROG], ! [AC_REQUIRE([AM_MISSING_HAS_RUN]) ! $1=${$1-"${am_missing_run}$2"} ! AC_SUBST($1)]) ! ! ! # AM_MISSING_HAS_RUN ! # ------------------ ! # Define MISSING if not defined so far and test if it supports --run. ! # If it does, set am_missing_run to use it, otherwise, to nothing. ! AC_DEFUN([AM_MISSING_HAS_RUN], ! [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ! test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" ! # Use eval to expand $SHELL ! if eval "$MISSING --run true"; then ! am_missing_run="$MISSING --run " else ! am_missing_run= ! am_backtick='`' ! AC_MSG_WARN([${am_backtick}missing' script is too old or missing]) fi ! ]) ! ! # AM_AUX_DIR_EXPAND ! ! # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets ! # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to ! # `$srcdir', `$srcdir/..', or `$srcdir/../..'. ! # ! # Of course, Automake must honor this variable whenever it calls a ! # tool from the auxiliary directory. The problem is that $srcdir (and ! # therefore $ac_aux_dir as well) can be either absolute or relative, ! # depending on how configure is run. This is pretty annoying, since ! # it makes $ac_aux_dir quite unusable in subdirectories: in the top ! # source directory, any form will work fine, but in subdirectories a ! # relative path needs to be adjusted first. ! # ! # $ac_aux_dir/missing ! # fails when called from a subdirectory if $ac_aux_dir is relative ! # $top_srcdir/$ac_aux_dir/missing ! # fails if $ac_aux_dir is absolute, ! # fails when called from a subdirectory in a VPATH build with ! # a relative $ac_aux_dir ! # ! # The reason of the latter failure is that $top_srcdir and $ac_aux_dir ! # are both prefixed by $srcdir. In an in-source build this is usually ! # harmless because $srcdir is `.', but things will broke when you ! # start a VPATH build or use an absolute $srcdir. ! # ! # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, ! # iff we strip the leading $srcdir from $ac_aux_dir. That would be: ! # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` ! # and then we would define $MISSING as ! # MISSING="\${SHELL} $am_aux_dir/missing" ! # This will work as long as MISSING is not called from configure, because ! # unfortunately $(top_srcdir) has no meaning in configure. ! # However there are other variables, like CC, which are often used in ! # configure, and could therefore not use this "fixed" $ac_aux_dir. ! # ! # Another solution, used here, is to always expand $ac_aux_dir to an ! # absolute PATH. The drawback is that using absolute paths prevent a ! # configured tree to be moved without reconfiguration. ! ! AC_DEFUN([AM_AUX_DIR_EXPAND], [ ! # expand $ac_aux_dir to an absolute path ! am_aux_dir=`CDPATH=:; cd $ac_aux_dir && pwd` ! ]) ! ! # AM_PROG_INSTALL_SH ! # ------------------ ! # Define $install_sh. ! AC_DEFUN([AM_PROG_INSTALL_SH], ! [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ! install_sh=${install_sh-"$am_aux_dir/install-sh"} ! AC_SUBST(install_sh)]) ! ! # One issue with vendor `install' (even GNU) is that you can't ! # specify the program used to strip binaries. This is especially ! # annoying in cross-compiling environments, where the build's strip ! # is unlikely to handle the host's binaries. ! # Fortunately install-sh will honor a STRIPPROG variable, so we ! # always use install-sh in `make install-strip', and initialize ! # STRIPPROG with the value of the STRIP variable (set by the user). ! AC_DEFUN([AM_PROG_INSTALL_STRIP], ! [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl ! INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" ! AC_SUBST([INSTALL_STRIP_PROGRAM])]) ! ! # serial 4 -*- Autoconf -*- ! ! ! ! # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be ! # written in clear, in which case automake, when reading aclocal.m4, ! # will think it sees a *use*, and therefore will trigger all it's ! # C support machinery. Also note that it means that autoscan, seeing ! # CC etc. in the Makefile, will ask for an AC_PROG_CC use... ! ! ! ! # _AM_DEPENDENCIES(NAME) ! # --------------------- ! # See how the compiler implements dependency checking. ! # NAME is "CC", "CXX" or "OBJC". ! # We try a few techniques and use that to set a single cache variable. ! # ! # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was ! # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular ! # dependency, and given that the user is not expected to run this macro, ! # just rely on AC_PROG_CC. ! AC_DEFUN([_AM_DEPENDENCIES], ! [AC_REQUIRE([AM_SET_DEPDIR])dnl ! AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl ! AC_REQUIRE([AM_MAKE_INCLUDE])dnl ! AC_REQUIRE([AM_DEP_TRACK])dnl ! ! ifelse([$1], CC, [depcc="$CC" am_compiler_list=], ! [$1], CXX, [depcc="$CXX" am_compiler_list=], ! [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'] ! [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], ! [depcc="$$1" am_compiler_list=]) ! ! AC_CACHE_CHECK([dependency style of $depcc], ! [am_cv_$1_dependencies_compiler_type], ! [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then ! # We make a subdir and do the tests there. Otherwise we can end up ! # making bogus files that we don't know about and never remove. For ! # instance it was reported that on HP-UX the gcc test will end up ! # making a dummy file named `D' -- because `-MD' means `put the output ! # in D'. ! mkdir conftest.dir ! # Copy depcomp to subdir because otherwise we won't find it if we're ! # using a relative directory. ! cp "$am_depcomp" conftest.dir ! cd conftest.dir ! ! am_cv_$1_dependencies_compiler_type=none ! if test "$am_compiler_list" = ""; then ! am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` ! fi ! for depmode in $am_compiler_list; do ! # We need to recreate these files for each test, as the compiler may ! # overwrite some of them when testing with obscure command lines. ! # This happens at least with the AIX C compiler. ! echo '#include "conftest.h"' > conftest.c ! echo 'int i;' > conftest.h ! echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf ! ! case $depmode in ! nosideeffect) ! # after this tag, mechanisms are not by side-effect, so they'll ! # only be used when explicitly requested ! if test "x$enable_dependency_tracking" = xyes; then ! continue ! else ! break ! fi ! ;; ! none) break ;; ! esac ! # We check with `-c' and `-o' for the sake of the "dashmstdout" ! # mode. It turns out that the SunPro C++ compiler does not properly ! # handle `-M -o', and we need to detect this. ! if depmode=$depmode \ ! source=conftest.c object=conftest.o \ ! depfile=conftest.Po tmpdepfile=conftest.TPo \ ! $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 && ! grep conftest.h conftest.Po > /dev/null 2>&1 && ! ${MAKE-make} -s -f confmf > /dev/null 2>&1; then ! am_cv_$1_dependencies_compiler_type=$depmode ! break ! fi ! done ! ! cd .. ! rm -rf conftest.dir ! else ! am_cv_$1_dependencies_compiler_type=none ! fi ! ]) ! $1DEPMODE="depmode=$am_cv_$1_dependencies_compiler_type" ! AC_SUBST([$1DEPMODE]) ! ]) ! ! ! # AM_SET_DEPDIR ! # ------------- ! # Choose a directory name for dependency files. ! # This macro is AC_REQUIREd in _AM_DEPENDENCIES ! AC_DEFUN([AM_SET_DEPDIR], ! [rm -f .deps 2>/dev/null ! mkdir .deps 2>/dev/null ! if test -d .deps; then ! DEPDIR=.deps ! else ! # MS-DOS does not allow filenames that begin with a dot. ! DEPDIR=_deps ! fi ! rmdir .deps 2>/dev/null ! AC_SUBST(DEPDIR) ! ]) ! ! ! # AM_DEP_TRACK ! # ------------ ! AC_DEFUN([AM_DEP_TRACK], ! [AC_ARG_ENABLE(dependency-tracking, ! [ --disable-dependency-tracking Speeds up one-time builds ! --enable-dependency-tracking Do not reject slow dependency extractors]) ! if test "x$enable_dependency_tracking" != xno; then ! am_depcomp="$ac_aux_dir/depcomp" ! AMDEPBACKSLASH='\' ! fi ! AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) ! pushdef([subst], defn([AC_SUBST])) ! subst(AMDEPBACKSLASH) ! popdef([subst]) ! ]) ! ! # Generate code to set up dependency tracking. ! # This macro should only be invoked once -- use via AC_REQUIRE. ! # Usage: ! # AM_OUTPUT_DEPENDENCY_COMMANDS ! ! # ! # This code is only required when automatic dependency tracking ! # is enabled. FIXME. This creates each `.P' file that we will ! # need in order to bootstrap the dependency handling code. ! AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],[ ! AC_OUTPUT_COMMANDS([ ! test x"$AMDEP_TRUE" != x"" || ! for mf in $CONFIG_FILES; do ! case "$mf" in ! Makefile) dirpart=.;; ! */Makefile) dirpart=`echo "$mf" | sed -e 's|/[^/]*$||'`;; ! *) continue;; ! esac ! grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue ! # Extract the definition of DEP_FILES from the Makefile without ! # running `make'. ! DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"` ! test -z "$DEPDIR" && continue ! # When using ansi2knr, U may be empty or an underscore; expand it ! U=`sed -n -e '/^U = / s///p' < "$mf"` ! test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" ! # We invoke sed twice because it is the simplest approach to ! # changing $(DEPDIR) to its actual value in the expansion. ! for file in `sed -n -e ' ! /^DEP_FILES = .*\\\\$/ { ! s/^DEP_FILES = // ! :loop ! s/\\\\$// ! p ! n ! /\\\\$/ b loop ! p ! } ! /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ ! sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do ! # Make sure the directory exists. ! test -f "$dirpart/$file" && continue ! fdir=`echo "$file" | sed -e 's|/[^/]*$||'` ! $ac_aux_dir/mkinstalldirs "$dirpart/$fdir" > /dev/null 2>&1 ! # echo "creating $dirpart/$file" ! echo '# dummy' > "$dirpart/$file" ! done ! done ! ], [AMDEP_TRUE="$AMDEP_TRUE" ! ac_aux_dir="$ac_aux_dir"])]) ! ! # AM_MAKE_INCLUDE() ! # ----------------- ! # Check to see how make treats includes. ! AC_DEFUN([AM_MAKE_INCLUDE], ! [am_make=${MAKE-make} ! cat > confinc << 'END' ! doit: ! @echo done ! END ! # If we don't find an include directive, just comment out the code. ! AC_MSG_CHECKING([for style of include used by $am_make]) ! am__include='#' ! am__quote= ! _am_result=none ! # First try GNU make style include. ! echo "include confinc" > confmf ! # We grep out `Entering directory' and `Leaving directory' ! # messages which can occur if `w' ends up in MAKEFLAGS. ! # In particular we don't look at `^make:' because GNU make might ! # be invoked under some other name (usually "gmake"), in which ! # case it prints its new name instead of `make'. ! if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then ! am__include=include ! am__quote= ! _am_result=GNU ! fi ! # Now try BSD make style include. ! if test "$am__include" = "#"; then ! echo '.include "confinc"' > confmf ! if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then ! am__include=.include ! am__quote='"' ! _am_result=BSD ! fi ! fi ! AC_SUBST(am__include) ! AC_SUBST(am__quote) ! AC_MSG_RESULT($_am_result) ! rm -f confinc confmf ! ]) ! ! # serial 3 ! ! # AM_CONDITIONAL(NAME, SHELL-CONDITION) ! # ------------------------------------- ! # Define a conditional. ! # ! # FIXME: Once using 2.50, use this: ! # m4_match([$1], [^TRUE\|FALSE$], [AC_FATAL([$0: invalid condition: $1])])dnl ! AC_DEFUN([AM_CONDITIONAL], ! [ifelse([$1], [TRUE], ! [errprint(__file__:__line__: [$0: invalid condition: $1 ! ])dnl ! m4exit(1)])dnl ! ifelse([$1], [FALSE], ! [errprint(__file__:__line__: [$0: invalid condition: $1 ! ])dnl ! m4exit(1)])dnl ! AC_SUBST([$1_TRUE]) ! AC_SUBST([$1_FALSE]) ! if $2; then ! $1_TRUE= ! $1_FALSE='#' ! else ! $1_TRUE='#' ! $1_FALSE= ! fi]) # Like AC_CONFIG_HEADER, but automatically create stamp file. + # serial 3 + + # When config.status generates a header, we must update the stamp-h file. + # This file resides in the same directory as the config header + # that is generated. We must strip everything past the first ":", + # and everything past the last "/". + + AC_PREREQ([2.12]) + AC_DEFUN([AM_CONFIG_HEADER], ! [ifdef([AC_FOREACH],dnl ! [dnl init our file count if it isn't already ! m4_ifndef([_AM_Config_Header_Index], m4_define([_AM_Config_Header_Index], [0])) ! dnl prepare to store our destination file list for use in config.status ! AC_FOREACH([_AM_File], [$1], ! [m4_pushdef([_AM_Dest], m4_patsubst(_AM_File, [:.*])) ! m4_define([_AM_Config_Header_Index], m4_incr(_AM_Config_Header_Index)) ! dnl and add it to the list of files AC keeps track of, along ! dnl with our hook ! AC_CONFIG_HEADERS(_AM_File, ! dnl COMMANDS, [, INIT-CMDS] ! [# update the timestamp ! echo timestamp >"AS_ESCAPE(_AM_DIRNAME(]_AM_Dest[))/stamp-h]_AM_Config_Header_Index[" ! ][$2]m4_ifval([$3], [, [$3]]))dnl AC_CONFIG_HEADERS ! m4_popdef([_AM_Dest])])],dnl ! [AC_CONFIG_HEADER([$1]) ! AC_OUTPUT_COMMANDS( ! ifelse(patsubst([$1], [[^ ]], []), ! [], ! [test -z "$CONFIG_HEADERS" || echo timestamp >dnl ! patsubst([$1], [^\([^:]*/\)?.*], [\1])stamp-h]),dnl ! [am_indx=1 ! for am_file in $1; do ! case " \$CONFIG_HEADERS " in ! *" \$am_file "*) ! am_dir=\`echo \$am_file |sed 's%:.*%%;s%[^/]*\$%%'\` ! if test -n "\$am_dir"; then ! am_tmpdir=\`echo \$am_dir |sed 's%^\(/*\).*\$%\1%'\` ! for am_subdir in \`echo \$am_dir |sed 's%/% %'\`; do ! am_tmpdir=\$am_tmpdir\$am_subdir/ ! if test ! -d \$am_tmpdir; then ! mkdir \$am_tmpdir ! fi ! done ! fi ! echo timestamp > "\$am_dir"stamp-h\$am_indx ;; esac ! am_indx=\`expr \$am_indx + 1\` ! done]) ! ])]) # AM_CONFIG_HEADER ! ! # _AM_DIRNAME(PATH) ! # ----------------- ! # Like AS_DIRNAME, only do it during macro expansion ! AC_DEFUN([_AM_DIRNAME], ! [m4_if(m4_regexp([$1], [^.*[^/]//*[^/][^/]*/*$]), -1, ! m4_if(m4_regexp([$1], [^//\([^/]\|$\)]), -1, ! m4_if(m4_regexp([$1], [^/.*]), -1, ! [.], ! m4_patsubst([$1], [^\(/\).*], [\1])), ! m4_patsubst([$1], [^\(//\)\([^/].*\|$\)], [\1])), ! m4_patsubst([$1], [^\(.*[^/]\)//*[^/][^/]*/*$], [\1]))[]dnl ! ]) # _AM_DIRNAME ! dnl AC_PROG_INTLTOOL([MINIMUM-VERSION]) *************** *** 432,451 **** AC_SUBST(GCONF_SCHEMA_FILE_DIR) AC_MSG_RESULT([Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files]) - ]) ! # Define a conditional. ! ! AC_DEFUN([AM_CONDITIONAL], ! [AC_SUBST($1_TRUE) ! AC_SUBST($1_FALSE) ! if $2; then ! $1_TRUE= ! $1_FALSE='#' ! else ! $1_TRUE='#' ! $1_FALSE= ! fi]) # Macro to add for using GNU gettext. # Ulrich Drepper , 1995, 1996 --- 836,851 ---- AC_SUBST(GCONF_SCHEMA_FILE_DIR) AC_MSG_RESULT([Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files]) ! AC_ARG_ENABLE(schemas-install, ! [ --disable-schemas-install Disable the schemas installation], ! [case "${enableval}" in ! yes) schemas_install=true ;; ! no) schemas_install=false ;; ! *) AC_MSG_ERROR(bad value ${enableval} for --disable-schemas-install) ;; ! esac],[schemas_install=true]) ! AM_CONDITIONAL(GCONF_SCHEMAS_INSTALL, test x$schemas_install = xtrue) ! ]) # Macro to add for using GNU gettext. # Ulrich Drepper , 1995, 1996 *************** *** 633,638 **** --- 1033,1040 ---- [CATOBJEXT=.mo DATADIRNAME=lib]) INSTOBJEXT=.mo + else + gt_cv_have_gettext=no fi fi ]) diff -crN ./acme/config.h.in /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./acme/config.h.in *** ./acme/config.h.in Sun Jan 19 21:59:52 2003 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./acme/config.h.in Sun Aug 10 00:04:02 2003 *************** *** 48,54 **** /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H ! /* package name */ #undef PACKAGE /* Define to the address where bug reports for this package should be sent. */ --- 48,54 ---- /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H ! /* Name of package */ #undef PACKAGE /* Define to the address where bug reports for this package should be sent. */ *************** *** 69,73 **** /* Define to 1 if you have the ANSI C header files. */ #undef STDC_HEADERS ! /* package version */ #undef VERSION --- 69,76 ---- /* Define to 1 if you have the ANSI C header files. */ #undef STDC_HEADERS ! /* Version number of package */ #undef VERSION + + /* Define to 1 if the X Window System is missing or not being used. */ + #undef X_DISPLAY_MISSING diff -crN ./acme/configure /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./acme/configure *** ./acme/configure Sat Feb 1 19:14:41 2003 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./acme/configure Sun Aug 10 00:04:08 2003 *************** *** 1,6 **** #! /bin/sh # Guess values for system-dependent variables and create Makefiles. ! # Generated by GNU Autoconf 2.57 for acme 2.0.2. # # Report bugs to . # --- 1,6 ---- #! /bin/sh # Guess values for system-dependent variables and create Makefiles. ! # Generated by GNU Autoconf 2.53 for acme 2.0.2. # # Report bugs to . # *************** *** 8,13 **** --- 8,21 ---- # Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. + + if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr + else + as_expr=false + fi + + ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## *************** *** 16,28 **** if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi # Support unset when possible. if (FOO=FOO; unset FOO) >/dev/null 2>&1; then as_unset=unset --- 24,34 ---- if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi + # NLS nuisances. # Support unset when possible. if (FOO=FOO; unset FOO) >/dev/null 2>&1; then as_unset=unset *************** *** 30,71 **** as_unset=false fi ! ! # Work around bugs in pre-3.0 UWIN ksh. ! $as_unset ENV MAIL MAILPATH ! PS1='$ ' ! PS2='> ' ! PS4='+ ' ! ! # NLS nuisances. ! for as_var in \ ! LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ ! LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ ! LC_TELEPHONE LC_TIME ! do ! if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then ! eval $as_var=C; export $as_var ! else ! $as_unset $as_var ! fi ! done ! ! # Required to use basename. ! if expr a : '\(a\)' >/dev/null 2>&1; then ! as_expr=expr ! else ! as_expr=false ! fi ! ! if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then ! as_basename=basename ! else ! as_basename=false ! fi # Name of the executable. ! as_me=`$as_basename "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ --- 36,69 ---- as_unset=false fi ! (set +x; test -n "`(LANG=C; export LANG) 2>&1`") && ! { $as_unset LANG || test "${LANG+set}" != set; } || ! { LANG=C; export LANG; } ! (set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") && ! { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } || ! { LC_ALL=C; export LC_ALL; } ! (set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") && ! { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } || ! { LC_TIME=C; export LC_TIME; } ! (set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") && ! { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } || ! { LC_CTYPE=C; export LC_CTYPE; } ! (set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") && ! { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } || ! { LANGUAGE=C; export LANGUAGE; } ! (set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") && ! { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } || ! { LC_COLLATE=C; export LC_COLLATE; } ! (set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") && ! { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } || ! { LC_NUMERIC=C; export LC_NUMERIC; } ! (set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") && ! { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } || ! { LC_MESSAGES=C; export LC_MESSAGES; } # Name of the executable. ! as_me=`(basename "$0") 2>/dev/null || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ *************** *** 76,82 **** /^X\/\(\/\).*/{ s//\1/; q; } s/.*/./; q'` - # PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' --- 74,79 ---- *************** *** 87,101 **** # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then ! echo "#! /bin/sh" >conf$$.sh ! echo "exit 0" >>conf$$.sh ! chmod +x conf$$.sh ! if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi ! rm -f conf$$.sh fi --- 84,98 ---- # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then ! echo "#! /bin/sh" >conftest.sh ! echo "exit 0" >>conftest.sh ! chmod +x conftest.sh ! if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi ! rm -f conftest.sh fi *************** *** 143,150 **** as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } CONFIG_SHELL=$as_dir/$as_base export CONFIG_SHELL exec "$CONFIG_SHELL" "$0" ${1+"$@"} --- 140,145 ---- *************** *** 217,228 **** fi rm -f conf$$ conf$$.exe conf$$.file - if mkdir -p . 2>/dev/null; then - as_mkdir_p=: - else - as_mkdir_p=false - fi - as_executable_p="test -f" # Sed expression to map a string onto a valid CPP name. --- 212,217 ---- *************** *** 239,245 **** IFS=" $as_nl" # CDPATH. ! $as_unset CDPATH # Name of the host. --- 228,234 ---- IFS=" $as_nl" # CDPATH. ! $as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; } # Name of the host. *************** *** 253,259 **** # Initializations. # ac_default_prefix=/usr/local - ac_config_libobj_dir=. cross_compiling=no subdirs= MFLAGS= --- 242,247 ---- *************** *** 310,317 **** # include #endif" - ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO SET_MAKE GETTEXT_PACKAGE INTLTOOL_DESKTOP_RULE INTLTOOL_DIRECTORY_RULE INTLTOOL_KEYS_RULE INTLTOOL_PROP_RULE INTLTOOL_OAF_RULE INTLTOOL_PONG_RULE INTLTOOL_SERVER_RULE INTLTOOL_SHEET_RULE INTLTOOL_SOUNDLIST_RULE INTLTOOL_UI_RULE INTLTOOL_XML_RULE INTLTOOL_CAVES_RULE INTLTOOL_SCHEMAS_RULE INTLTOOL_THEME_RULE INTLTOOL_EXTRACT INTLTOOL_MERGE INTLTOOL_UPDATE INTLTOOL_PERL GOB2 PKG_CONFIG EXTRA_GNOME_CFLAGS EXTRA_GNOME_LIBS GCONFTOOL GCONF_SCHEMA_CONFIG_SOURCE GCONF_SCHEMA_FILE_DIR CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT HAVE_OSS_TRUE HAVE_OSS_FALSE ALSA_CFLAGS ALSA_LIBS HAVE_ALSA_TRUE HAVE_ALSA_FALSE HAVE_FB_TRUE HAVE_FB_FALSE HAVE_XFREE_TRUE HAVE_XFREE_FALSE HAVE_XSUN_TRUE HAVE_XSUN_FALSE CPP EGREP USE_NLS MSGFMT GMSGFMT XGETTEXT CATALOGS CATOBJEXT DATADIRNAME GMOFILES INSTOBJEXT INTLLIBS PO_IN_DATADIR_TRUE PO_IN_DATADIR_FALSE POFILES POSUB MKINSTALLDIRS LIBOBJS LTLIBOBJS' - ac_subst_files='' # Initialize some variables set by options. ac_init_help= --- 298,303 ---- *************** *** 735,743 **** { (exit 1); exit 1; }; } fi fi - (cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || - { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 - { (exit 1); exit 1; }; } srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` ac_env_build_alias_set=${build_alias+set} ac_env_build_alias_value=$build_alias --- 721,726 ---- *************** *** 836,841 **** --- 819,828 ---- --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names + + X features: + --x-includes=DIR X include files are in DIR + --x-libraries=DIR X library files are in DIR _ACEOF fi *************** *** 845,853 **** --- 832,848 ---- esac cat <<\_ACEOF + Optional Features: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --disable-dependency-tracking Speeds up one-time builds + --enable-dependency-tracking Do not reject slow dependency extractors + --disable-schemas-install Disable the schemas installation + Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-x use the X Window System --with-gconf-source=sourceaddress Config database for installing schema files. --with-gconf-schema-file-dir=dir Directory for installing schema files. *************** *** 900,906 **** # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be # absolute. ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` ! ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` --- 895,901 ---- # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be # absolute. ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` ! ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd` ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` *************** *** 927,933 **** if $ac_init_version; then cat <<\_ACEOF acme configure 2.0.2 ! generated by GNU Autoconf 2.57 Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc. --- 922,928 ---- if $ac_init_version; then cat <<\_ACEOF acme configure 2.0.2 ! generated by GNU Autoconf 2.53 Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc. *************** *** 942,948 **** running configure, to aid debugging if configure makes a mistake. It was created by acme $as_me 2.0.2, which was ! generated by GNU Autoconf 2.57. Invocation command line was $ $0 $@ --- 937,943 ---- running configure, to aid debugging if configure makes a mistake. It was created by acme $as_me 2.0.2, which was ! generated by GNU Autoconf 2.53. Invocation command line was $ $0 $@ *************** *** 994,1047 **** # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. - # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. - # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= - ac_configure_args0= - ac_configure_args1= ac_sep= ! ac_must_keep_next=false ! for ac_pass in 1 2 do ! for ac_arg ! do ! case $ac_arg in ! -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; ! -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ! | -silent | --silent | --silen | --sile | --sil) ! continue ;; ! *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) ! ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; ! esac ! case $ac_pass in ! 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; ! 2) ! ac_configure_args1="$ac_configure_args1 '$ac_arg'" ! if test $ac_must_keep_next = true; then ! ac_must_keep_next=false # Got value, back to normal. ! else ! case $ac_arg in ! *=* | --config-cache | -C | -disable-* | --disable-* \ ! | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ ! | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ ! | -with-* | --with-* | -without-* | --without-* | --x) ! case "$ac_configure_args0 " in ! "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; ! esac ! ;; ! -* ) ac_must_keep_next=true ;; ! esac ! fi ! ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" ! # Get rid of the leading space. ! ac_sep=" " ! ;; ! esac ! done done - $as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } - $as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there --- 989,1015 ---- # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Also quote any args containing shell meta-characters. ac_configure_args= ac_sep= ! for ac_arg do ! case $ac_arg in ! -no-create | --no-create | --no-creat | --no-crea | --no-cre \ ! | --no-cr | --no-c | -n ) continue ;; ! -no-recursion | --no-recursion | --no-recursio | --no-recursi \ ! | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ! continue ;; ! *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) ! ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; ! esac ! case " $ac_configure_args " in ! *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. ! *) ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" ! ac_sep=" " ;; ! esac ! # Get rid of the leading space. done # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there *************** *** 1052,1058 **** # Save into config.log some information that might help in debugging. { echo - cat <<\_ASBOX ## ---------------- ## ## Cache variables. ## --- 1020,1025 ---- *************** *** 1075,1109 **** esac; } echo - - cat <<\_ASBOX - ## ----------------- ## - ## Output variables. ## - ## ----------------- ## - _ASBOX - echo - for ac_var in $ac_subst_vars - do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" - done | sort - echo - - if test -n "$ac_subst_files"; then - cat <<\_ASBOX - ## ------------- ## - ## Output files. ## - ## ------------- ## - _ASBOX - echo - for ac_var in $ac_subst_files - do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" - done | sort - echo - fi - if test -s confdefs.h; then cat <<\_ASBOX ## ----------- ## --- 1042,1047 ---- *************** *** 1111,1117 **** ## ----------- ## _ASBOX echo ! sed "/^$/d" confdefs.h | sort echo fi test "$ac_signal" != 0 && --- 1049,1055 ---- ## ----------- ## _ASBOX echo ! sed "/^$/d" confdefs.h echo fi test "$ac_signal" != 0 && *************** *** 1277,1284 **** - - am__api_version="1.4" ac_aux_dir= for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do if test -f $ac_dir/install-sh; then --- 1215,1220 ---- *************** *** 1385,1404 **** echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 # Just in case sleep 1 ! echo timestamp > conftestfile # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( ! set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` if test "$*" = "X"; then # -L didn't work. ! set X `ls -t $srcdir/configure conftestfile` fi ! if test "$*" != "X $srcdir/configure conftestfile" \ ! && test "$*" != "X conftestfile $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a --- 1321,1341 ---- echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 # Just in case sleep 1 ! echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( ! set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. ! set X `ls -t $srcdir/configure conftest.file` fi ! rm -f conftest.file ! if test "$*" != "X $srcdir/configure conftest.file" \ ! && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a *************** *** 1411,1417 **** { (exit 1); exit 1; }; } fi ! test "$2" = conftestfile ) then # Ok. --- 1348,1354 ---- { (exit 1); exit 1; }; } fi ! test "$2" = conftest.file ) then # Ok. *************** *** 1423,1429 **** Check your system clock" >&2;} { (exit 1); exit 1; }; } fi - rm -f conftest* echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 test "$program_prefix" != NONE && --- 1360,1365 ---- *************** *** 1439,1453 **** program_transform_name=`echo $program_transform_name | sed -f conftest.sed` rm conftest.sed ! echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 ! echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'` if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.make <<\_ACEOF all: ! @echo 'ac_maketemp="$(MAKE)"' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` --- 1375,1444 ---- program_transform_name=`echo $program_transform_name | sed -f conftest.sed` rm conftest.sed ! ! # expand $ac_aux_dir to an absolute path ! am_aux_dir=`CDPATH=:; cd $ac_aux_dir && pwd` ! ! test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" ! # Use eval to expand $SHELL ! if eval "$MISSING --run true"; then ! am_missing_run="$MISSING --run " ! else ! am_missing_run= ! am_backtick='`' ! { echo "$as_me:$LINENO: WARNING: ${am_backtick}missing' script is too old or missing" >&5 ! echo "$as_me: WARNING: ${am_backtick}missing' script is too old or missing" >&2;} ! fi ! ! for ac_prog in gawk mawk nawk awk ! do ! # Extract the first word of "$ac_prog", so it can be a program name with args. ! set dummy $ac_prog; ac_word=$2 ! echo "$as_me:$LINENO: checking for $ac_word" >&5 ! echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ! if test "${ac_cv_prog_AWK+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! if test -n "$AWK"; then ! ac_cv_prog_AWK="$AWK" # Let the user override the test. ! else ! as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ! for as_dir in $PATH ! do ! IFS=$as_save_IFS ! test -z "$as_dir" && as_dir=. ! for ac_exec_ext in '' $ac_executable_extensions; do ! if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ! ac_cv_prog_AWK="$ac_prog" ! echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ! break 2 ! fi ! done ! done ! ! fi ! fi ! AWK=$ac_cv_prog_AWK ! if test -n "$AWK"; then ! echo "$as_me:$LINENO: result: $AWK" >&5 ! echo "${ECHO_T}$AWK" >&6 ! else ! echo "$as_me:$LINENO: result: no" >&5 ! echo "${ECHO_T}no" >&6 ! fi ! ! test -n "$AWK" && break ! done ! ! echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \${MAKE}" >&5 ! echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'` if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.make <<\_ACEOF all: ! @echo 'ac_maketemp="${MAKE}"' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` *************** *** 1468,1484 **** SET_MAKE="MAKE=${MAKE-make}" fi ! PACKAGE=acme - VERSION=2.0.2 ! if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} { (exit 1); exit 1; }; } fi cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF --- 1459,1509 ---- SET_MAKE="MAKE=${MAKE-make}" fi + # Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. + if test "${enable_dependency_tracking+set}" = set; then + enableval="$enable_dependency_tracking" ! fi; ! if test "x$enable_dependency_tracking" != xno; then ! am_depcomp="$ac_aux_dir/depcomp" ! AMDEPBACKSLASH='\' ! fi ! ! ! if test "x$enable_dependency_tracking" != xno; then ! AMDEP_TRUE= ! AMDEP_FALSE='#' ! else ! AMDEP_TRUE='#' ! AMDEP_FALSE= ! fi ! ! ! rm -f .deps 2>/dev/null ! mkdir .deps 2>/dev/null ! if test -d .deps; then ! DEPDIR=.deps ! else ! # MS-DOS does not allow filenames that begin with a dot. ! DEPDIR=_deps ! fi ! rmdir .deps 2>/dev/null ! ! ! # test to see if srcdir already configured ! if test "`CDPATH=:; cd $srcdir && pwd`" != "`pwd`" && ! test -f $srcdir/config.status; then { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} { (exit 1); exit 1; }; } fi + # Define the identity of the package. + PACKAGE=acme + VERSION=2.0.2 + cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF *************** *** 1489,1587 **** _ACEOF ! missing_dir=`cd $ac_aux_dir && pwd` ! echo "$as_me:$LINENO: checking for working aclocal-${am__api_version}" >&5 ! echo $ECHO_N "checking for working aclocal-${am__api_version}... $ECHO_C" >&6 ! # Run test in a subshell; some versions of sh will print an error if ! # an executable is not found, even if stderr is redirected. ! # Redirect stdin to placate older versions of autoconf. Sigh. ! if (aclocal-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then ! ACLOCAL=aclocal-${am__api_version} ! echo "$as_me:$LINENO: result: found" >&5 ! echo "${ECHO_T}found" >&6 ! else ! ACLOCAL="$missing_dir/missing aclocal-${am__api_version}" ! echo "$as_me:$LINENO: result: missing" >&5 ! echo "${ECHO_T}missing" >&6 ! fi ! ! echo "$as_me:$LINENO: checking for working autoconf" >&5 ! echo $ECHO_N "checking for working autoconf... $ECHO_C" >&6 ! # Run test in a subshell; some versions of sh will print an error if ! # an executable is not found, even if stderr is redirected. ! # Redirect stdin to placate older versions of autoconf. Sigh. ! if (autoconf --version) < /dev/null > /dev/null 2>&1; then ! AUTOCONF=autoconf ! echo "$as_me:$LINENO: result: found" >&5 ! echo "${ECHO_T}found" >&6 ! else ! AUTOCONF="$missing_dir/missing autoconf" ! echo "$as_me:$LINENO: result: missing" >&5 ! echo "${ECHO_T}missing" >&6 ! fi ! ! echo "$as_me:$LINENO: checking for working automake-${am__api_version}" >&5 ! echo $ECHO_N "checking for working automake-${am__api_version}... $ECHO_C" >&6 ! # Run test in a subshell; some versions of sh will print an error if ! # an executable is not found, even if stderr is redirected. ! # Redirect stdin to placate older versions of autoconf. Sigh. ! if (automake-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then ! AUTOMAKE=automake-${am__api_version} ! echo "$as_me:$LINENO: result: found" >&5 ! echo "${ECHO_T}found" >&6 ! else ! AUTOMAKE="$missing_dir/missing automake-${am__api_version}" ! echo "$as_me:$LINENO: result: missing" >&5 ! echo "${ECHO_T}missing" >&6 ! fi ! ! echo "$as_me:$LINENO: checking for working autoheader" >&5 ! echo $ECHO_N "checking for working autoheader... $ECHO_C" >&6 ! # Run test in a subshell; some versions of sh will print an error if ! # an executable is not found, even if stderr is redirected. ! # Redirect stdin to placate older versions of autoconf. Sigh. ! if (autoheader --version) < /dev/null > /dev/null 2>&1; then ! AUTOHEADER=autoheader ! echo "$as_me:$LINENO: result: found" >&5 ! echo "${ECHO_T}found" >&6 ! else ! AUTOHEADER="$missing_dir/missing autoheader" ! echo "$as_me:$LINENO: result: missing" >&5 ! echo "${ECHO_T}missing" >&6 ! fi ! ! echo "$as_me:$LINENO: checking for working makeinfo" >&5 ! echo $ECHO_N "checking for working makeinfo... $ECHO_C" >&6 ! # Run test in a subshell; some versions of sh will print an error if ! # an executable is not found, even if stderr is redirected. ! # Redirect stdin to placate older versions of autoconf. Sigh. ! if (makeinfo --version) < /dev/null > /dev/null 2>&1; then ! MAKEINFO=makeinfo ! echo "$as_me:$LINENO: result: found" >&5 ! echo "${ECHO_T}found" >&6 ! else ! MAKEINFO="$missing_dir/missing makeinfo" ! echo "$as_me:$LINENO: result: missing" >&5 ! echo "${ECHO_T}missing" >&6 ! fi ! ac_config_headers="$ac_config_headers config.h" ! ac_config_commands="$ac_config_commands default-1" ! cat >>confdefs.h <<\_ACEOF ! #define PACKAGE acme ! _ACEOF ! cat >>confdefs.h <<\_ACEOF ! #define VERSION 2.0.2 ! _ACEOF cat >>confdefs.h <<\_ACEOF --- 1514,1562 ---- _ACEOF + # Autoconf 2.50 wants to disallow AM_ names. We explicitly allow + # the ones we care about. ! # Autoconf 2.50 always computes EXEEXT. However we need to be ! # compatible with 2.13, for now. So we always define EXEEXT, but we ! # don't compute it. + # Similar for OBJEXT -- only we only use OBJEXT if the user actually + # requests that it be used. This is a bit dumb. + : ${OBJEXT=o} ! # Some tools Automake needs. ! ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal"} + AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} ! ! AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake"} ! ! ! AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} ! ! ! MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} ! ! ! AMTAR=${AMTAR-"${am_missing_run}tar"} ! ! install_sh=${install_sh-"$am_aux_dir/install-sh"} ! ! INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" ! ! # We need awk for the "check" target. The system "awk" is bad on ! # some platforms. ! ! ! ac_config_headers="$ac_config_headers config.h" ! cat >>confdefs.h <<\_ACEOF *************** *** 1713,2072 **** # Manually sed perl in so people don't have to put the intltool scripts in AC_OUTPUT. ! ac_config_commands="$ac_config_commands default-2" ! # Extract the first word of "gob2", so it can be a program name with args. ! set dummy gob2; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ! if test "${ac_cv_path_GOB2+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ! case $GOB2 in ! [\\/]* | ?:[\\/]*) ! ac_cv_path_GOB2="$GOB2" # Let the user override the test with a path. ! ;; ! *) ! as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ! ac_cv_path_GOB2="$as_dir/$ac_word$ac_exec_ext" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done - ;; - esac fi ! GOB2=$ac_cv_path_GOB2 ! ! if test -n "$GOB2"; then ! echo "$as_me:$LINENO: result: $GOB2" >&5 ! echo "${ECHO_T}$GOB2" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi ! if test ! x$GOB2 = x; then ! if test ! x = x; then ! echo "$as_me:$LINENO: checking for gob-2 >= " >&5 ! echo $ECHO_N "checking for gob-2 >= ... $ECHO_C" >&6 ! g_r_ve=`echo |sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'` ! g_r_ma=`echo |sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'` ! g_r_mi=`echo |sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'` ! g_ve=`$GOB2 --version 2>&1|sed 's/Gob version \([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'` ! g_ma=`$GOB2 --version 2>&1|sed 's/Gob version \([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'` ! g_mi=`$GOB2 --version 2>&1|sed 's/Gob version \([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'` ! ! if test $g_ve -eq $g_r_ve; then ! if test $g_ma -ge $g_r_ma; then ! if test $g_mi -ge $g_r_mi; then ! echo "$as_me:$LINENO: result: ok" >&5 ! echo "${ECHO_T}ok" >&6 ! else ! if test $g_ma -gt $g_r_ma; then ! echo "$as_me:$LINENO: result: ok" >&5 ! echo "${ECHO_T}ok" >&6 ! else ! { { echo "$as_me:$LINENO: error: \"found $g_ve.$g_ma.$g_mi requires $g_r_ve.$g_r_ma.$g_r_mi\"" >&5 ! echo "$as_me: error: \"found $g_ve.$g_ma.$g_mi requires $g_r_ve.$g_r_ma.$g_r_mi\"" >&2;} ! { (exit 1); exit 1; }; } ! fi ! fi ! else ! { { echo "$as_me:$LINENO: error: \"found $g_ve.$g_ma.$g_mi requires $g_r_ve.$g_r_ma.$g_r_mi\"" >&5 ! echo "$as_me: error: \"found $g_ve.$g_ma.$g_mi requires $g_r_ve.$g_r_ma.$g_r_mi\"" >&2;} ! { (exit 1); exit 1; }; } ! fi ! else ! if test $g_ve -gt $g_r_ve; then ! echo "$as_me:$LINENO: result: ok" >&5 ! echo "${ECHO_T}ok" >&6 ! else ! { { echo "$as_me:$LINENO: error: major version $g_ve found but $g_r_ve required" >&5 ! echo "$as_me: error: major version $g_ve found but $g_r_ve required" >&2;} ! { (exit 1); exit 1; }; } ! fi ! fi ! ! unset gob_version ! unset g_ve ! unset g_ma ! unset g_mi ! unset g_r_ve ! unset g_r_ma ! unset g_r_mi ! fi ! ! ! else ! { echo "$as_me:$LINENO: WARNING: Cannot find GOB-2, check http://www.5z.com/jirka/gob.html" >&5 ! echo "$as_me: WARNING: Cannot find GOB-2, check http://www.5z.com/jirka/gob.html" >&2;} ! fi ! ! ! ! ! succeeded=no ! ! if test -z "$PKG_CONFIG"; then ! # Extract the first word of "pkg-config", so it can be a program name with args. ! set dummy pkg-config; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ! if test "${ac_cv_path_PKG_CONFIG+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ! case $PKG_CONFIG in ! [\\/]* | ?:[\\/]*) ! ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. ! ;; ! *) ! as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ! ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" ! echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ! break 2 ! fi ! done ! done ! ! test -z "$ac_cv_path_PKG_CONFIG" && ac_cv_path_PKG_CONFIG="no" ! ;; ! esac ! fi ! PKG_CONFIG=$ac_cv_path_PKG_CONFIG ! ! if test -n "$PKG_CONFIG"; then ! echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5 ! echo "${ECHO_T}$PKG_CONFIG" >&6 ! else ! echo "$as_me:$LINENO: result: no" >&5 ! echo "${ECHO_T}no" >&6 ! fi ! ! fi ! ! if test "$PKG_CONFIG" = "no" ; then ! echo "*** The pkg-config script could not be found. Make sure it is" ! echo "*** in your path, or set the PKG_CONFIG environment variable" ! echo "*** to the full path to pkg-config." ! echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config." ! else ! PKG_CONFIG_MIN_VERSION=0.9.0 ! if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then ! echo "$as_me:$LINENO: checking for libgnomeui-2.0 libglade-2.0 libwnck-1.0 >= 2.1.5" >&5 ! echo $ECHO_N "checking for libgnomeui-2.0 libglade-2.0 libwnck-1.0 >= 2.1.5... $ECHO_C" >&6 ! ! if $PKG_CONFIG --exists "libgnomeui-2.0 libglade-2.0 libwnck-1.0 >= 2.1.5" ; then ! echo "$as_me:$LINENO: result: yes" >&5 ! echo "${ECHO_T}yes" >&6 ! succeeded=yes ! ! echo "$as_me:$LINENO: checking EXTRA_GNOME_CFLAGS" >&5 ! echo $ECHO_N "checking EXTRA_GNOME_CFLAGS... $ECHO_C" >&6 ! EXTRA_GNOME_CFLAGS=`$PKG_CONFIG --cflags "libgnomeui-2.0 libglade-2.0 libwnck-1.0 >= 2.1.5"` ! echo "$as_me:$LINENO: result: $EXTRA_GNOME_CFLAGS" >&5 ! echo "${ECHO_T}$EXTRA_GNOME_CFLAGS" >&6 ! ! echo "$as_me:$LINENO: checking EXTRA_GNOME_LIBS" >&5 ! echo $ECHO_N "checking EXTRA_GNOME_LIBS... $ECHO_C" >&6 ! EXTRA_GNOME_LIBS=`$PKG_CONFIG --libs "libgnomeui-2.0 libglade-2.0 libwnck-1.0 >= 2.1.5"` ! echo "$as_me:$LINENO: result: $EXTRA_GNOME_LIBS" >&5 ! echo "${ECHO_T}$EXTRA_GNOME_LIBS" >&6 ! else ! EXTRA_GNOME_CFLAGS="" ! EXTRA_GNOME_LIBS="" ! ## If we have a custom action on failure, don't print errors, but ! ## do set a variable so people can do so. ! EXTRA_GNOME_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libgnomeui-2.0 libglade-2.0 libwnck-1.0 >= 2.1.5"` ! echo $EXTRA_GNOME_PKG_ERRORS ! fi ! ! ! ! else ! echo "*** Your version of pkg-config is too old. You need version $PKG_CONFIG_MIN_VERSION or newer." ! echo "*** See http://www.freedesktop.org/software/pkgconfig" ! fi ! fi ! ! if test $succeeded = yes; then ! : ! else ! { { echo "$as_me:$LINENO: error: Library requirements (libgnomeui-2.0 libglade-2.0 libwnck-1.0 >= 2.1.5) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them." >&5 ! echo "$as_me: error: Library requirements (libgnomeui-2.0 libglade-2.0 libwnck-1.0 >= 2.1.5) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them." >&2;} ! { (exit 1); exit 1; }; } ! fi ! ! ! ! ! echo "$as_me:$LINENO: checking for l33tness" >&5 ! echo $ECHO_N "checking for l33tness... $ECHO_C" >&6 ! if test "`uname -n`x" = "dozox" ; then ! echo "$as_me:$LINENO: result: l33t like h4d3zZ" >&5 ! echo "${ECHO_T}l33t like h4d3zZ" >&6 ! else ! echo "$as_me:$LINENO: result: l4m3" >&5 ! echo "${ECHO_T}l4m3" >&6 ! fi ! ! # Extract the first word of "gconftool-2", so it can be a program name with args. ! set dummy gconftool-2; ac_word=$2 ! echo "$as_me:$LINENO: checking for $ac_word" >&5 ! echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ! if test "${ac_cv_path_GCONFTOOL+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! case $GCONFTOOL in ! [\\/]* | ?:[\\/]*) ! ac_cv_path_GCONFTOOL="$GCONFTOOL" # Let the user override the test with a path. ! ;; ! *) ! as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ! for as_dir in $PATH ! do ! IFS=$as_save_IFS ! test -z "$as_dir" && as_dir=. ! for ac_exec_ext in '' $ac_executable_extensions; do ! if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ! ac_cv_path_GCONFTOOL="$as_dir/$ac_word$ac_exec_ext" ! echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ! break 2 ! fi ! done ! done ! ! ;; ! esac ! fi ! GCONFTOOL=$ac_cv_path_GCONFTOOL ! ! if test -n "$GCONFTOOL"; then ! echo "$as_me:$LINENO: result: $GCONFTOOL" >&5 ! echo "${ECHO_T}$GCONFTOOL" >&6 ! else ! echo "$as_me:$LINENO: result: no" >&5 ! echo "${ECHO_T}no" >&6 ! fi ! ! ! if test "x$GCONF_SCHEMA_INSTALL_SOURCE" = "x"; then ! GCONF_SCHEMA_CONFIG_SOURCE=`gconftool-2 --get-default-source` ! else ! GCONF_SCHEMA_CONFIG_SOURCE=$GCONF_SCHEMA_INSTALL_SOURCE ! fi ! ! ! # Check whether --with-gconf-source or --without-gconf-source was given. ! if test "${with_gconf_source+set}" = set; then ! withval="$with_gconf_source" ! GCONF_SCHEMA_CONFIG_SOURCE="$withval" ! fi; ! ! ! echo "$as_me:$LINENO: result: Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation" >&5 ! echo "${ECHO_T}Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation" >&6 ! ! if test "x$GCONF_SCHEMA_FILE_DIR" = "x"; then ! GCONF_SCHEMA_FILE_DIR='$(sysconfdir)/gconf/schemas/' ! else ! GCONF_SCHEMA_FILE_DIR=$GCONF_SCHEMA_FILE_DIR ! fi ! ! ! # Check whether --with-gconf-schema-file-dir or --without-gconf-schema-file-dir was given. ! if test "${with_gconf_schema_file_dir+set}" = set; then ! withval="$with_gconf_schema_file_dir" ! GCONF_SCHEMA_FILE_DIR="$withval" ! fi; ! ! ! echo "$as_me:$LINENO: result: Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files" >&5 ! echo "${ECHO_T}Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files" >&6 ! ! ! have_oss=no ! ac_ext=c ! ac_cpp='$CPP $CPPFLAGS' ! ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ! ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ! ac_compiler_gnu=$ac_cv_c_compiler_gnu ! if test -n "$ac_tool_prefix"; then ! # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. ! set dummy ${ac_tool_prefix}gcc; ac_word=$2 ! echo "$as_me:$LINENO: checking for $ac_word" >&5 ! echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ! if test "${ac_cv_prog_CC+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! if test -n "$CC"; then ! ac_cv_prog_CC="$CC" # Let the user override the test. ! else ! as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ! for as_dir in $PATH ! do ! IFS=$as_save_IFS ! test -z "$as_dir" && as_dir=. ! for ac_exec_ext in '' $ac_executable_extensions; do ! if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ! ac_cv_prog_CC="${ac_tool_prefix}gcc" ! echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ! break 2 ! fi ! done ! done ! ! fi ! fi ! CC=$ac_cv_prog_CC ! if test -n "$CC"; then ! echo "$as_me:$LINENO: result: $CC" >&5 ! echo "${ECHO_T}$CC" >&6 ! else ! echo "$as_me:$LINENO: result: no" >&5 ! echo "${ECHO_T}no" >&6 ! fi ! ! fi ! if test -z "$ac_cv_prog_CC"; then ! ac_ct_CC=$CC ! # Extract the first word of "gcc", so it can be a program name with args. ! set dummy gcc; ac_word=$2 ! echo "$as_me:$LINENO: checking for $ac_word" >&5 ! echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ! if test "${ac_cv_prog_ac_ct_CC+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! if test -n "$ac_ct_CC"; then ! ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. ! else ! as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ! for as_dir in $PATH ! do ! IFS=$as_save_IFS ! test -z "$as_dir" && as_dir=. ! for ac_exec_ext in '' $ac_executable_extensions; do ! if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ! ac_cv_prog_ac_ct_CC="gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi --- 1688,1801 ---- # Manually sed perl in so people don't have to put the intltool scripts in AC_OUTPUT. ! ac_config_commands="$ac_config_commands default-1" + ac_config_commands="$ac_config_commands default-2" ! am_make=${MAKE-make} ! cat > confinc << 'END' ! doit: ! @echo done ! END ! # If we don't find an include directive, just comment out the code. ! echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 ! echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 ! am__include='#' ! am__quote= ! _am_result=none ! # First try GNU make style include. ! echo "include confinc" > confmf ! # We grep out `Entering directory' and `Leaving directory' ! # messages which can occur if `w' ends up in MAKEFLAGS. ! # In particular we don't look at `^make:' because GNU make might ! # be invoked under some other name (usually "gmake"), in which ! # case it prints its new name instead of `make'. ! if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then ! am__include=include ! am__quote= ! _am_result=GNU ! fi ! # Now try BSD make style include. ! if test "$am__include" = "#"; then ! echo '.include "confinc"' > confmf ! if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then ! am__include=.include ! am__quote='"' ! _am_result=BSD ! fi ! fi ! ! ! echo "$as_me:$LINENO: result: $_am_result" >&5 ! echo "${ECHO_T}$_am_result" >&6 ! rm -f confinc confmf ! ! ac_ext=c ! ac_cpp='$CPP $CPPFLAGS' ! ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ! ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ! ac_compiler_gnu=$ac_cv_c_compiler_gnu ! if test -n "$ac_tool_prefix"; then ! # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. ! set dummy ${ac_tool_prefix}gcc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ! if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ! if test -n "$CC"; then ! ac_cv_prog_CC="$CC" # Let the user override the test. ! else ! as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ! ac_cv_prog_CC="${ac_tool_prefix}gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi ! fi ! CC=$ac_cv_prog_CC ! if test -n "$CC"; then ! echo "$as_me:$LINENO: result: $CC" >&5 ! echo "${ECHO_T}$CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi ! fi ! if test -z "$ac_cv_prog_CC"; then ! ac_ct_CC=$CC ! # Extract the first word of "gcc", so it can be a program name with args. ! set dummy gcc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ! if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ! if test -n "$ac_ct_CC"; then ! ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. ! else ! as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ! ac_cv_prog_ac_ct_CC="gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi *************** *** 2209,2215 **** # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ! ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi --- 1938,1946 ---- # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ! set dummy "$as_dir/$ac_word" ${1+"$@"} ! shift ! ac_cv_prog_CC="$@" fi fi fi *************** *** 2314,2323 **** fi ! test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH ! See \`config.log' for more details." >&5 ! echo "$as_me: error: no acceptable C compiler found in \$PATH ! See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } # Provide some information about the compiler. --- 2045,2052 ---- fi ! test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH" >&5 ! echo "$as_me: error: no acceptable C compiler found in \$PATH" >&2;} { (exit 1); exit 1; }; } # Provide some information about the compiler. *************** *** 2342,2353 **** cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ int main () { --- 2071,2084 ---- cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif int main () { *************** *** 2357,2363 **** } _ACEOF ac_clean_files_save=$ac_clean_files ! ac_clean_files="$ac_clean_files a.out a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. --- 2088,2094 ---- } _ACEOF ac_clean_files_save=$ac_clean_files ! ac_clean_files="$ac_clean_files a.out a.exe" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. *************** *** 2376,2414 **** # Be careful to initialize this variable, since it used to be cached. # Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. ac_cv_exeext= ! # b.out is created by i960 compilers. ! for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out ! do ! test -f "$ac_file" || continue case $ac_file in ! *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ! ;; ! conftest.$ac_ext ) ! # This is the source file. ! ;; ! [ab].out ) ! # We found the default executable, but exeext='' is most ! # certainly right. ! break;; ! *.* ) ! ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` ! # FIXME: I believe we export ac_cv_exeext for Libtool, ! # but it would be cool to find out if it's true. Does anybody ! # maintain Libtool? --akim. ! export ac_cv_exeext ! break;; ! * ) ! break;; esac done else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ! { { echo "$as_me:$LINENO: error: C compiler cannot create executables ! See \`config.log' for more details." >&5 ! echo "$as_me: error: C compiler cannot create executables ! See \`config.log' for more details." >&2;} { (exit 77); exit 77; }; } fi --- 2107,2132 ---- # Be careful to initialize this variable, since it used to be cached. # Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. ac_cv_exeext= ! for ac_file in `ls a_out.exe a.exe conftest.exe 2>/dev/null; ! ls a.out conftest 2>/dev/null; ! ls a.* conftest.* 2>/dev/null`; do case $ac_file in ! *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb | *.xSYM ) ;; ! a.out ) # We found the default executable, but exeext='' is most ! # certainly right. ! break;; ! *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` ! # FIXME: I believe we export ac_cv_exeext for Libtool --akim. ! export ac_cv_exeext ! break;; ! * ) break;; esac done else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! { { echo "$as_me:$LINENO: error: C compiler cannot create executables" >&5 ! echo "$as_me: error: C compiler cannot create executables" >&2;} { (exit 77); exit 77; }; } fi *************** *** 2435,2445 **** cross_compiling=yes else { { echo "$as_me:$LINENO: error: cannot run C compiled programs. ! If you meant to cross compile, use \`--host'. ! See \`config.log' for more details." >&5 echo "$as_me: error: cannot run C compiled programs. ! If you meant to cross compile, use \`--host'. ! See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi fi --- 2153,2161 ---- cross_compiling=yes else { { echo "$as_me:$LINENO: error: cannot run C compiled programs. ! If you meant to cross compile, use \`--host'." >&5 echo "$as_me: error: cannot run C compiled programs. ! If you meant to cross compile, use \`--host'." >&2;} { (exit 1); exit 1; }; } fi fi *************** *** 2447,2453 **** echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 ! rm -f a.out a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save # Check the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. --- 2163,2169 ---- echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 ! rm -f a.out a.exe conftest$ac_cv_exeext ac_clean_files=$ac_clean_files_save # Check the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. *************** *** 2467,2476 **** # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. ! for ac_file in conftest.exe conftest conftest.*; do ! test -f "$ac_file" || continue case $ac_file in ! *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` export ac_cv_exeext break;; --- 2183,2191 ---- # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. ! for ac_file in `(ls conftest.exe; ls conftest; ls conftest.*) 2>/dev/null`; do case $ac_file in ! *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` export ac_cv_exeext break;; *************** *** 2478,2487 **** esac done else ! { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link ! See \`config.log' for more details." >&5 ! echo "$as_me: error: cannot compute suffix of executables: cannot compile and link ! See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi --- 2193,2200 ---- esac done else ! { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link" >&5 ! echo "$as_me: error: cannot compute suffix of executables: cannot compile and link" >&2;} { (exit 1); exit 1; }; } fi *************** *** 2499,2510 **** else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ int main () { --- 2212,2225 ---- else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif int main () { *************** *** 2521,2539 **** (exit $ac_status); }; then for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do case $ac_file in ! *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ! { { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile ! See \`config.log' for more details." >&5 ! echo "$as_me: error: cannot compute suffix of object files: cannot compile ! See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi --- 2236,2251 ---- (exit $ac_status); }; then for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do case $ac_file in ! *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! { { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile" >&5 ! echo "$as_me: error: cannot compute suffix of object files: cannot compile" >&2;} { (exit 1); exit 1; }; } fi *************** *** 2550,2561 **** else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ int main () { --- 2262,2275 ---- else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif int main () { *************** *** 2582,2589 **** ac_compiler_gnu=yes else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ac_compiler_gnu=no fi rm -f conftest.$ac_objext conftest.$ac_ext --- 2296,2302 ---- ac_compiler_gnu=yes else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ac_compiler_gnu=no fi rm -f conftest.$ac_objext conftest.$ac_ext *************** *** 2603,2614 **** else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ int main () { --- 2316,2329 ---- else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif int main () { *************** *** 2632,2639 **** ac_cv_prog_cc_g=yes else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ac_cv_prog_cc_g=no fi rm -f conftest.$ac_objext conftest.$ac_ext --- 2347,2353 ---- ac_cv_prog_cc_g=yes else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ac_cv_prog_cc_g=no fi rm -f conftest.$ac_objext conftest.$ac_ext *************** *** 2655,2764 **** CFLAGS= fi fi ! echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 ! echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 ! if test "${ac_cv_prog_cc_stdc+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! ac_cv_prog_cc_stdc=no ! ac_save_CC=$CC cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ ! #include ! #include ! #include ! #include ! /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ ! struct buf { int x; }; ! FILE * (*rcsopen) (struct buf *, struct stat *, int); ! static char *e (p, i) ! char **p; ! int i; ! { ! return p[i]; ! } ! static char *f (char * (*g) (char **, int), char **p, ...) ! { ! char *s; ! va_list v; ! va_start (v,p); ! s = g (p, va_arg (v,int)); ! va_end (v); ! return s; ! } ! int test (int i, double x); ! struct s1 {int (*f) (int a);}; ! struct s2 {int (*f) (double a);}; ! int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); ! int argc; ! char **argv; ! int ! main () ! { ! return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ! ; ! return 0; ! } ! _ACEOF ! # Don't try gcc -ansi; that turns off useful extensions and ! # breaks some systems' header files. ! # AIX -qlanglvl=ansi ! # Ultrix and OSF/1 -std1 ! # HP-UX 10.20 and later -Ae ! # HP-UX older versions -Aa -D_HPUX_SOURCE ! # SVR4 -Xc -D__EXTENSIONS__ ! for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" ! do ! CC="$ac_save_CC $ac_arg" ! rm -f conftest.$ac_objext ! if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ! (eval $ac_compile) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } && ! { ac_try='test -s conftest.$ac_objext' ! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ! (eval $ac_try) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; }; then ! ac_cv_prog_cc_stdc=$ac_arg ! break ! else ! echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ! fi ! rm -f conftest.$ac_objext ! done ! rm -f conftest.$ac_ext conftest.$ac_objext ! CC=$ac_save_CC ! ! fi ! ! case "x$ac_cv_prog_cc_stdc" in ! x|xno) ! echo "$as_me:$LINENO: result: none needed" >&5 ! echo "${ECHO_T}none needed" >&6 ;; ! *) ! echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 ! echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 ! CC="$CC $ac_cv_prog_cc_stdc" ;; ! esac ! ! # Some people use a C++ compiler to compile C. Since we use `exit', ! # in C++ we need to declare it. In case someone uses the same compiler ! # for both compiling C and C++ we need to have the C++ compiler decide ! # the declaration of exit, since it's the most demanding environment. ! cat >conftest.$ac_ext <<_ACEOF ! #ifndef __cplusplus ! choke me ! #endif _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 --- 2369,2382 ---- CFLAGS= fi fi ! # Some people use a C++ compiler to compile C. Since we use `exit', ! # in C++ we need to declare it. In case someone uses the same compiler ! # for both compiling C and C++ we need to have the C++ compiler decide ! # the declaration of exit, since it's the most demanding environment. cat >conftest.$ac_ext <<_ACEOF ! #ifndef __cplusplus ! choke me ! #endif _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 *************** *** 2783,2795 **** do cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ #include $ac_declaration int main () { --- 2401,2415 ---- do cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" #include $ac_declaration + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif int main () { *************** *** 2813,2831 **** : else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! continue fi rm -f conftest.$ac_objext conftest.$ac_ext cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ $ac_declaration int main () { --- 2433,2452 ---- : else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 continue fi rm -f conftest.$ac_objext conftest.$ac_ext cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" $ac_declaration + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif int main () { *************** *** 2849,2886 **** break else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 - fi - rm -f conftest.$ac_objext conftest.$ac_ext - done - rm -f conftest* - if test -n "$ac_declaration"; then - echo '#ifdef __cplusplus' >>confdefs.h - echo $ac_declaration >>confdefs.h - echo '#endif' >>confdefs.h - fi else ! echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 fi - rm -f conftest.$ac_objext conftest.$ac_ext - ac_ext=c - ac_cpp='$CPP $CPPFLAGS' - ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' - ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' - ac_compiler_gnu=$ac_cv_c_compiler_gnu cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ #ifdef __NetBSD__ #include --- 2470,4258 ---- break else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! fi ! rm -f conftest.$ac_objext conftest.$ac_ext ! done ! rm -f conftest* ! if test -n "$ac_declaration"; then ! echo '#ifdef __cplusplus' >>confdefs.h ! echo $ac_declaration >>confdefs.h ! echo '#endif' >>confdefs.h ! fi ! ! else ! echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! fi ! rm -f conftest.$ac_objext conftest.$ac_ext ! ac_ext=c ! ac_cpp='$CPP $CPPFLAGS' ! ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ! ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ! ac_compiler_gnu=$ac_cv_c_compiler_gnu ! ! depcc="$CC" am_compiler_list= ! ! echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 ! echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 ! if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then ! # We make a subdir and do the tests there. Otherwise we can end up ! # making bogus files that we don't know about and never remove. For ! # instance it was reported that on HP-UX the gcc test will end up ! # making a dummy file named `D' -- because `-MD' means `put the output ! # in D'. ! mkdir conftest.dir ! # Copy depcomp to subdir because otherwise we won't find it if we're ! # using a relative directory. ! cp "$am_depcomp" conftest.dir ! cd conftest.dir ! ! am_cv_CC_dependencies_compiler_type=none ! if test "$am_compiler_list" = ""; then ! am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` ! fi ! for depmode in $am_compiler_list; do ! # We need to recreate these files for each test, as the compiler may ! # overwrite some of them when testing with obscure command lines. ! # This happens at least with the AIX C compiler. ! echo '#include "conftest.h"' > conftest.c ! echo 'int i;' > conftest.h ! echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf ! ! case $depmode in ! nosideeffect) ! # after this tag, mechanisms are not by side-effect, so they'll ! # only be used when explicitly requested ! if test "x$enable_dependency_tracking" = xyes; then ! continue ! else ! break ! fi ! ;; ! none) break ;; ! esac ! # We check with `-c' and `-o' for the sake of the "dashmstdout" ! # mode. It turns out that the SunPro C++ compiler does not properly ! # handle `-M -o', and we need to detect this. ! if depmode=$depmode \ ! source=conftest.c object=conftest.o \ ! depfile=conftest.Po tmpdepfile=conftest.TPo \ ! $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 && ! grep conftest.h conftest.Po > /dev/null 2>&1 && ! ${MAKE-make} -s -f confmf > /dev/null 2>&1; then ! am_cv_CC_dependencies_compiler_type=$depmode ! break ! fi ! done ! ! cd .. ! rm -rf conftest.dir ! else ! am_cv_CC_dependencies_compiler_type=none ! fi ! ! fi ! echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 ! echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 ! CCDEPMODE="depmode=$am_cv_CC_dependencies_compiler_type" ! ! ! ! ac_ext=c ! ac_cpp='$CPP $CPPFLAGS' ! ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ! ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ! ac_compiler_gnu=$ac_cv_c_compiler_gnu ! echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 ! echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 ! # On Suns, sometimes $CPP names a directory. ! if test -n "$CPP" && test -d "$CPP"; then ! CPP= ! fi ! if test -z "$CPP"; then ! if test "${ac_cv_prog_CPP+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! # Double quotes because CPP needs to be expanded ! for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" ! do ! ac_preproc_ok=false ! for ac_c_preproc_warn_flag in '' yes ! do ! # Use a header file that comes with gcc, so configuring glibc ! # with a fresh cross-compiler works. ! # On the NeXT, cc -E runs the code through the compiler's parser, ! # not just through cpp. "Syntax error" is here to catch this case. ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! #include "confdefs.h" ! #include ! Syntax error ! _ACEOF ! if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 ! (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ! ac_status=$? ! egrep -v '^ *\+' conftest.er1 >conftest.err ! rm -f conftest.er1 ! cat conftest.err >&5 ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } >/dev/null; then ! if test -s conftest.err; then ! ac_cpp_err=$ac_c_preproc_warn_flag ! else ! ac_cpp_err= ! fi ! else ! ac_cpp_err=yes ! fi ! if test -z "$ac_cpp_err"; then ! : ! else ! echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! # Broken: fails on valid input. ! continue ! fi ! rm -f conftest.err conftest.$ac_ext ! ! # OK, works on sane cases. Now check whether non-existent headers ! # can be detected and how. ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! #include "confdefs.h" ! #include ! _ACEOF ! if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 ! (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ! ac_status=$? ! egrep -v '^ *\+' conftest.er1 >conftest.err ! rm -f conftest.er1 ! cat conftest.err >&5 ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } >/dev/null; then ! if test -s conftest.err; then ! ac_cpp_err=$ac_c_preproc_warn_flag ! else ! ac_cpp_err= ! fi ! else ! ac_cpp_err=yes ! fi ! if test -z "$ac_cpp_err"; then ! # Broken: success on invalid input. ! continue ! else ! echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! # Passes both tests. ! ac_preproc_ok=: ! break ! fi ! rm -f conftest.err conftest.$ac_ext ! ! done ! # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. ! rm -f conftest.err conftest.$ac_ext ! if $ac_preproc_ok; then ! break ! fi ! ! done ! ac_cv_prog_CPP=$CPP ! ! fi ! CPP=$ac_cv_prog_CPP ! else ! ac_cv_prog_CPP=$CPP ! fi ! echo "$as_me:$LINENO: result: $CPP" >&5 ! echo "${ECHO_T}$CPP" >&6 ! ac_preproc_ok=false ! for ac_c_preproc_warn_flag in '' yes ! do ! # Use a header file that comes with gcc, so configuring glibc ! # with a fresh cross-compiler works. ! # On the NeXT, cc -E runs the code through the compiler's parser, ! # not just through cpp. "Syntax error" is here to catch this case. ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! #include "confdefs.h" ! #include ! Syntax error ! _ACEOF ! if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 ! (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ! ac_status=$? ! egrep -v '^ *\+' conftest.er1 >conftest.err ! rm -f conftest.er1 ! cat conftest.err >&5 ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } >/dev/null; then ! if test -s conftest.err; then ! ac_cpp_err=$ac_c_preproc_warn_flag ! else ! ac_cpp_err= ! fi ! else ! ac_cpp_err=yes ! fi ! if test -z "$ac_cpp_err"; then ! : ! else ! echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! # Broken: fails on valid input. ! continue ! fi ! rm -f conftest.err conftest.$ac_ext ! ! # OK, works on sane cases. Now check whether non-existent headers ! # can be detected and how. ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! #include "confdefs.h" ! #include ! _ACEOF ! if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 ! (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ! ac_status=$? ! egrep -v '^ *\+' conftest.er1 >conftest.err ! rm -f conftest.er1 ! cat conftest.err >&5 ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } >/dev/null; then ! if test -s conftest.err; then ! ac_cpp_err=$ac_c_preproc_warn_flag ! else ! ac_cpp_err= ! fi ! else ! ac_cpp_err=yes ! fi ! if test -z "$ac_cpp_err"; then ! # Broken: success on invalid input. ! continue ! else ! echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! # Passes both tests. ! ac_preproc_ok=: ! break ! fi ! rm -f conftest.err conftest.$ac_ext ! ! done ! # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. ! rm -f conftest.err conftest.$ac_ext ! if $ac_preproc_ok; then ! : ! else ! { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check" >&5 ! echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check" >&2;} ! { (exit 1); exit 1; }; } ! fi ! ! ac_ext=c ! ac_cpp='$CPP $CPPFLAGS' ! ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ! ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ! ac_compiler_gnu=$ac_cv_c_compiler_gnu ! ! ! echo "$as_me:$LINENO: checking for X" >&5 ! echo $ECHO_N "checking for X... $ECHO_C" >&6 ! ! ! # Check whether --with-x or --without-x was given. ! if test "${with_x+set}" = set; then ! withval="$with_x" ! ! fi; ! # $have_x is `yes', `no', `disabled', or empty when we do not yet know. ! if test "x$with_x" = xno; then ! # The user explicitly disabled X. ! have_x=disabled ! else ! if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then ! # Both variables are already set. ! have_x=yes ! else ! if test "${ac_cv_have_x+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! # One or both of the vars are not set, and there is no cached value. ! ac_x_includes=no ac_x_libraries=no ! rm -fr conftest.dir ! if mkdir conftest.dir; then ! cd conftest.dir ! # Make sure to not put "make" in the Imakefile rules, since we grep it out. ! cat >Imakefile <<'_ACEOF' ! acfindx: ! @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"' ! _ACEOF ! if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then ! # GNU make sometimes prints "make[1]: Entering...", which would confuse us. ! eval `${MAKE-make} acfindx 2>/dev/null | grep -v make` ! # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. ! for ac_extension in a so sl; do ! if test ! -f $ac_im_usrlibdir/libX11.$ac_extension && ! test -f $ac_im_libdir/libX11.$ac_extension; then ! ac_im_usrlibdir=$ac_im_libdir; break ! fi ! done ! # Screen out bogus values from the imake configuration. They are ! # bogus both because they are the default anyway, and because ! # using them would break gcc on systems where it needs fixed includes. ! case $ac_im_incroot in ! /usr/include) ;; ! *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;; ! esac ! case $ac_im_usrlibdir in ! /usr/lib | /lib) ;; ! *) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;; ! esac ! fi ! cd .. ! rm -fr conftest.dir ! fi ! ! # Standard set of common directories for X headers. ! # Check X11 before X11Rn because it is often a symlink to the current release. ! ac_x_header_dirs=' ! /usr/X11/include ! /usr/X11R6/include ! /usr/X11R5/include ! /usr/X11R4/include ! ! /usr/include/X11 ! /usr/include/X11R6 ! /usr/include/X11R5 ! /usr/include/X11R4 ! ! /usr/local/X11/include ! /usr/local/X11R6/include ! /usr/local/X11R5/include ! /usr/local/X11R4/include ! ! /usr/local/include/X11 ! /usr/local/include/X11R6 ! /usr/local/include/X11R5 ! /usr/local/include/X11R4 ! ! /usr/X386/include ! /usr/x386/include ! /usr/XFree86/include/X11 ! ! /usr/include ! /usr/local/include ! /usr/unsupported/include ! /usr/athena/include ! /usr/local/x11r5/include ! /usr/lpp/Xamples/include ! ! /usr/openwin/include ! /usr/openwin/share/include' ! ! if test "$ac_x_includes" = no; then ! # Guess where to find include files, by looking for Intrinsic.h. ! # First, try using that file with no special directory specified. ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! #include "confdefs.h" ! #include ! _ACEOF ! if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 ! (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ! ac_status=$? ! egrep -v '^ *\+' conftest.er1 >conftest.err ! rm -f conftest.er1 ! cat conftest.err >&5 ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } >/dev/null; then ! if test -s conftest.err; then ! ac_cpp_err=$ac_c_preproc_warn_flag ! else ! ac_cpp_err= ! fi ! else ! ac_cpp_err=yes ! fi ! if test -z "$ac_cpp_err"; then ! # We can compile using X headers with no special include directory. ! ac_x_includes= ! else ! echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! for ac_dir in $ac_x_header_dirs; do ! if test -r "$ac_dir/X11/Intrinsic.h"; then ! ac_x_includes=$ac_dir ! break ! fi ! done ! fi ! rm -f conftest.err conftest.$ac_ext ! fi # $ac_x_includes = no ! ! if test "$ac_x_libraries" = no; then ! # Check for the libraries. ! # See if we find them without any special options. ! # Don't add to $LIBS permanently. ! ac_save_LIBS=$LIBS ! LIBS="-lXt $LIBS" ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! #include "confdefs.h" ! #include ! #ifdef F77_DUMMY_MAIN ! # ifdef __cplusplus ! extern "C" ! # endif ! int F77_DUMMY_MAIN() { return 1; } ! #endif ! int ! main () ! { ! XtMalloc (0) ! ; ! return 0; ! } ! _ACEOF ! rm -f conftest.$ac_objext conftest$ac_exeext ! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ! (eval $ac_link) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } && ! { ac_try='test -s conftest$ac_exeext' ! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ! (eval $ac_try) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; }; then ! LIBS=$ac_save_LIBS ! # We can link X programs with no special library path. ! ac_x_libraries= ! else ! echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! LIBS=$ac_save_LIBS ! for ac_dir in `echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g` ! do ! # Don't even attempt the hair of trying to link an X program! ! for ac_extension in a so sl; do ! if test -r $ac_dir/libXt.$ac_extension; then ! ac_x_libraries=$ac_dir ! break 2 ! fi ! done ! done ! fi ! rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext ! fi # $ac_x_libraries = no ! ! if test "$ac_x_includes" = no || test "$ac_x_libraries" = no; then ! # Didn't find X anywhere. Cache the known absence of X. ! ac_cv_have_x="have_x=no" ! else ! # Record where we found X for the cache. ! ac_cv_have_x="have_x=yes \ ! ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries" ! fi ! fi ! ! fi ! eval "$ac_cv_have_x" ! fi # $with_x != no ! ! if test "$have_x" != yes; then ! echo "$as_me:$LINENO: result: $have_x" >&5 ! echo "${ECHO_T}$have_x" >&6 ! no_x=yes ! else ! # If each of the values was on the command line, it overrides each guess. ! test "x$x_includes" = xNONE && x_includes=$ac_x_includes ! test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries ! # Update the cache value to reflect the command line values. ! ac_cv_have_x="have_x=yes \ ! ac_x_includes=$x_includes ac_x_libraries=$x_libraries" ! echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5 ! echo "${ECHO_T}libraries $x_libraries, headers $x_includes" >&6 ! fi ! ! if test "$no_x" = yes; then ! # Not all programs may use this symbol, but it does not hurt to define it. ! ! cat >>confdefs.h <<\_ACEOF ! #define X_DISPLAY_MISSING 1 ! _ACEOF ! ! X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS= ! else ! if test -n "$x_includes"; then ! X_CFLAGS="$X_CFLAGS -I$x_includes" ! fi ! ! # It would also be nice to do this for all -L options, not just this one. ! if test -n "$x_libraries"; then ! X_LIBS="$X_LIBS -L$x_libraries" ! # For Solaris; some versions of Sun CC require a space after -R and ! # others require no space. Words are not sufficient . . . . ! case `(uname -sr) 2>/dev/null` in ! "SunOS 5"*) ! echo "$as_me:$LINENO: checking whether -R must be followed by a space" >&5 ! echo $ECHO_N "checking whether -R must be followed by a space... $ECHO_C" >&6 ! ac_xsave_LIBS=$LIBS; LIBS="$LIBS -R$x_libraries" ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! #include "confdefs.h" ! ! #ifdef F77_DUMMY_MAIN ! # ifdef __cplusplus ! extern "C" ! # endif ! int F77_DUMMY_MAIN() { return 1; } ! #endif ! int ! main () ! { ! ! ; ! return 0; ! } ! _ACEOF ! rm -f conftest.$ac_objext conftest$ac_exeext ! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ! (eval $ac_link) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } && ! { ac_try='test -s conftest$ac_exeext' ! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ! (eval $ac_try) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; }; then ! ac_R_nospace=yes ! else ! echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! ac_R_nospace=no ! fi ! rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext ! if test $ac_R_nospace = yes; then ! echo "$as_me:$LINENO: result: no" >&5 ! echo "${ECHO_T}no" >&6 ! X_LIBS="$X_LIBS -R$x_libraries" ! else ! LIBS="$ac_xsave_LIBS -R $x_libraries" ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! #include "confdefs.h" ! ! #ifdef F77_DUMMY_MAIN ! # ifdef __cplusplus ! extern "C" ! # endif ! int F77_DUMMY_MAIN() { return 1; } ! #endif ! int ! main () ! { ! ! ; ! return 0; ! } ! _ACEOF ! rm -f conftest.$ac_objext conftest$ac_exeext ! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ! (eval $ac_link) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } && ! { ac_try='test -s conftest$ac_exeext' ! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ! (eval $ac_try) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; }; then ! ac_R_space=yes ! else ! echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! ac_R_space=no ! fi ! rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext ! if test $ac_R_space = yes; then ! echo "$as_me:$LINENO: result: yes" >&5 ! echo "${ECHO_T}yes" >&6 ! X_LIBS="$X_LIBS -R $x_libraries" ! else ! echo "$as_me:$LINENO: result: neither works" >&5 ! echo "${ECHO_T}neither works" >&6 ! fi ! fi ! LIBS=$ac_xsave_LIBS ! esac ! fi ! ! # Check for system-dependent libraries X programs must link with. ! # Do this before checking for the system-independent R6 libraries ! # (-lICE), since we may need -lsocket or whatever for X linking. ! ! if test "$ISC" = yes; then ! X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet" ! else ! # Martyn Johnson says this is needed for Ultrix, if the X ! # libraries were built with DECnet support. And Karl Berry says ! # the Alpha needs dnet_stub (dnet does not exist). ! ac_xsave_LIBS="$LIBS"; LIBS="$LIBS $X_LIBS -lX11" ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! #include "confdefs.h" ! ! /* Override any gcc2 internal prototype to avoid an error. */ ! #ifdef __cplusplus ! extern "C" ! #endif ! /* We use char because int might match the return type of a gcc2 ! builtin and then its argument prototype would still apply. */ ! char XOpenDisplay (); ! #ifdef F77_DUMMY_MAIN ! # ifdef __cplusplus ! extern "C" ! # endif ! int F77_DUMMY_MAIN() { return 1; } ! #endif ! int ! main () ! { ! XOpenDisplay (); ! ; ! return 0; ! } ! _ACEOF ! rm -f conftest.$ac_objext conftest$ac_exeext ! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ! (eval $ac_link) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } && ! { ac_try='test -s conftest$ac_exeext' ! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ! (eval $ac_try) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; }; then ! : ! else ! echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet" >&5 ! echo $ECHO_N "checking for dnet_ntoa in -ldnet... $ECHO_C" >&6 ! if test "${ac_cv_lib_dnet_dnet_ntoa+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! ac_check_lib_save_LIBS=$LIBS ! LIBS="-ldnet $LIBS" ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! #include "confdefs.h" ! ! /* Override any gcc2 internal prototype to avoid an error. */ ! #ifdef __cplusplus ! extern "C" ! #endif ! /* We use char because int might match the return type of a gcc2 ! builtin and then its argument prototype would still apply. */ ! char dnet_ntoa (); ! #ifdef F77_DUMMY_MAIN ! # ifdef __cplusplus ! extern "C" ! # endif ! int F77_DUMMY_MAIN() { return 1; } ! #endif ! int ! main () ! { ! dnet_ntoa (); ! ; ! return 0; ! } ! _ACEOF ! rm -f conftest.$ac_objext conftest$ac_exeext ! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ! (eval $ac_link) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } && ! { ac_try='test -s conftest$ac_exeext' ! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ! (eval $ac_try) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; }; then ! ac_cv_lib_dnet_dnet_ntoa=yes ! else ! echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! ac_cv_lib_dnet_dnet_ntoa=no ! fi ! rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext ! LIBS=$ac_check_lib_save_LIBS ! fi ! echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_dnet_ntoa" >&5 ! echo "${ECHO_T}$ac_cv_lib_dnet_dnet_ntoa" >&6 ! if test $ac_cv_lib_dnet_dnet_ntoa = yes; then ! X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet" ! fi ! ! if test $ac_cv_lib_dnet_dnet_ntoa = no; then ! echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet_stub" >&5 ! echo $ECHO_N "checking for dnet_ntoa in -ldnet_stub... $ECHO_C" >&6 ! if test "${ac_cv_lib_dnet_stub_dnet_ntoa+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! ac_check_lib_save_LIBS=$LIBS ! LIBS="-ldnet_stub $LIBS" ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! #include "confdefs.h" ! ! /* Override any gcc2 internal prototype to avoid an error. */ ! #ifdef __cplusplus ! extern "C" ! #endif ! /* We use char because int might match the return type of a gcc2 ! builtin and then its argument prototype would still apply. */ ! char dnet_ntoa (); ! #ifdef F77_DUMMY_MAIN ! # ifdef __cplusplus ! extern "C" ! # endif ! int F77_DUMMY_MAIN() { return 1; } ! #endif ! int ! main () ! { ! dnet_ntoa (); ! ; ! return 0; ! } ! _ACEOF ! rm -f conftest.$ac_objext conftest$ac_exeext ! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ! (eval $ac_link) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } && ! { ac_try='test -s conftest$ac_exeext' ! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ! (eval $ac_try) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; }; then ! ac_cv_lib_dnet_stub_dnet_ntoa=yes ! else ! echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! ac_cv_lib_dnet_stub_dnet_ntoa=no ! fi ! rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext ! LIBS=$ac_check_lib_save_LIBS ! fi ! echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5 ! echo "${ECHO_T}$ac_cv_lib_dnet_stub_dnet_ntoa" >&6 ! if test $ac_cv_lib_dnet_stub_dnet_ntoa = yes; then ! X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub" ! fi ! ! fi ! fi ! rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext ! LIBS="$ac_xsave_LIBS" ! ! # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT, ! # to get the SysV transport functions. ! # Chad R. Larson says the Pyramis MIS-ES running DC/OSx (SVR4) ! # needs -lnsl. ! # The nsl library prevents programs from opening the X display ! # on Irix 5.2, according to T.E. Dickey. ! # The functions gethostbyname, getservbyname, and inet_addr are ! # in -lbsd on LynxOS 3.0.1/i386, according to Lars Hecking. ! echo "$as_me:$LINENO: checking for gethostbyname" >&5 ! echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6 ! if test "${ac_cv_func_gethostbyname+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! #include "confdefs.h" ! /* System header to define __stub macros and hopefully few prototypes, ! which can conflict with char gethostbyname (); below. */ ! #include ! /* Override any gcc2 internal prototype to avoid an error. */ ! #ifdef __cplusplus ! extern "C" ! #endif ! /* We use char because int might match the return type of a gcc2 ! builtin and then its argument prototype would still apply. */ ! char gethostbyname (); ! char (*f) (); ! ! #ifdef F77_DUMMY_MAIN ! # ifdef __cplusplus ! extern "C" ! # endif ! int F77_DUMMY_MAIN() { return 1; } ! #endif ! int ! main () ! { ! /* The GNU C library defines this for functions which it implements ! to always fail with ENOSYS. Some functions are actually named ! something starting with __ and the normal name is an alias. */ ! #if defined (__stub_gethostbyname) || defined (__stub___gethostbyname) ! choke me ! #else ! f = gethostbyname; ! #endif ! ! ; ! return 0; ! } ! _ACEOF ! rm -f conftest.$ac_objext conftest$ac_exeext ! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ! (eval $ac_link) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } && ! { ac_try='test -s conftest$ac_exeext' ! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ! (eval $ac_try) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; }; then ! ac_cv_func_gethostbyname=yes ! else ! echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! ac_cv_func_gethostbyname=no ! fi ! rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext ! fi ! echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5 ! echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6 ! ! if test $ac_cv_func_gethostbyname = no; then ! echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 ! echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6 ! if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! ac_check_lib_save_LIBS=$LIBS ! LIBS="-lnsl $LIBS" ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! #include "confdefs.h" ! ! /* Override any gcc2 internal prototype to avoid an error. */ ! #ifdef __cplusplus ! extern "C" ! #endif ! /* We use char because int might match the return type of a gcc2 ! builtin and then its argument prototype would still apply. */ ! char gethostbyname (); ! #ifdef F77_DUMMY_MAIN ! # ifdef __cplusplus ! extern "C" ! # endif ! int F77_DUMMY_MAIN() { return 1; } ! #endif ! int ! main () ! { ! gethostbyname (); ! ; ! return 0; ! } ! _ACEOF ! rm -f conftest.$ac_objext conftest$ac_exeext ! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ! (eval $ac_link) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } && ! { ac_try='test -s conftest$ac_exeext' ! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ! (eval $ac_try) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; }; then ! ac_cv_lib_nsl_gethostbyname=yes ! else ! echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! ac_cv_lib_nsl_gethostbyname=no ! fi ! rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext ! LIBS=$ac_check_lib_save_LIBS ! fi ! echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5 ! echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6 ! if test $ac_cv_lib_nsl_gethostbyname = yes; then ! X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl" ! fi ! ! if test $ac_cv_lib_nsl_gethostbyname = no; then ! echo "$as_me:$LINENO: checking for gethostbyname in -lbsd" >&5 ! echo $ECHO_N "checking for gethostbyname in -lbsd... $ECHO_C" >&6 ! if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! ac_check_lib_save_LIBS=$LIBS ! LIBS="-lbsd $LIBS" ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! #include "confdefs.h" ! ! /* Override any gcc2 internal prototype to avoid an error. */ ! #ifdef __cplusplus ! extern "C" ! #endif ! /* We use char because int might match the return type of a gcc2 ! builtin and then its argument prototype would still apply. */ ! char gethostbyname (); ! #ifdef F77_DUMMY_MAIN ! # ifdef __cplusplus ! extern "C" ! # endif ! int F77_DUMMY_MAIN() { return 1; } ! #endif ! int ! main () ! { ! gethostbyname (); ! ; ! return 0; ! } ! _ACEOF ! rm -f conftest.$ac_objext conftest$ac_exeext ! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ! (eval $ac_link) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } && ! { ac_try='test -s conftest$ac_exeext' ! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ! (eval $ac_try) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; }; then ! ac_cv_lib_bsd_gethostbyname=yes ! else ! echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! ac_cv_lib_bsd_gethostbyname=no ! fi ! rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext ! LIBS=$ac_check_lib_save_LIBS ! fi ! echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_gethostbyname" >&5 ! echo "${ECHO_T}$ac_cv_lib_bsd_gethostbyname" >&6 ! if test $ac_cv_lib_bsd_gethostbyname = yes; then ! X_EXTRA_LIBS="$X_EXTRA_LIBS -lbsd" ! fi ! ! fi ! fi ! ! # lieder@skyler.mavd.honeywell.com says without -lsocket, ! # socket/setsockopt and other routines are undefined under SCO ODT ! # 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary ! # on later versions), says Simon Leinen: it contains gethostby* ! # variants that don't use the nameserver (or something). -lsocket ! # must be given before -lnsl if both are needed. We assume that ! # if connect needs -lnsl, so does gethostbyname. ! echo "$as_me:$LINENO: checking for connect" >&5 ! echo $ECHO_N "checking for connect... $ECHO_C" >&6 ! if test "${ac_cv_func_connect+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! #include "confdefs.h" ! /* System header to define __stub macros and hopefully few prototypes, ! which can conflict with char connect (); below. */ ! #include ! /* Override any gcc2 internal prototype to avoid an error. */ ! #ifdef __cplusplus ! extern "C" ! #endif ! /* We use char because int might match the return type of a gcc2 ! builtin and then its argument prototype would still apply. */ ! char connect (); ! char (*f) (); ! ! #ifdef F77_DUMMY_MAIN ! # ifdef __cplusplus ! extern "C" ! # endif ! int F77_DUMMY_MAIN() { return 1; } ! #endif ! int ! main () ! { ! /* The GNU C library defines this for functions which it implements ! to always fail with ENOSYS. Some functions are actually named ! something starting with __ and the normal name is an alias. */ ! #if defined (__stub_connect) || defined (__stub___connect) ! choke me ! #else ! f = connect; ! #endif ! ! ; ! return 0; ! } ! _ACEOF ! rm -f conftest.$ac_objext conftest$ac_exeext ! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ! (eval $ac_link) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } && ! { ac_try='test -s conftest$ac_exeext' ! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ! (eval $ac_try) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; }; then ! ac_cv_func_connect=yes ! else ! echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! ac_cv_func_connect=no ! fi ! rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext ! fi ! echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5 ! echo "${ECHO_T}$ac_cv_func_connect" >&6 ! ! if test $ac_cv_func_connect = no; then ! echo "$as_me:$LINENO: checking for connect in -lsocket" >&5 ! echo $ECHO_N "checking for connect in -lsocket... $ECHO_C" >&6 ! if test "${ac_cv_lib_socket_connect+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! ac_check_lib_save_LIBS=$LIBS ! LIBS="-lsocket $X_EXTRA_LIBS $LIBS" ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! #include "confdefs.h" ! ! /* Override any gcc2 internal prototype to avoid an error. */ ! #ifdef __cplusplus ! extern "C" ! #endif ! /* We use char because int might match the return type of a gcc2 ! builtin and then its argument prototype would still apply. */ ! char connect (); ! #ifdef F77_DUMMY_MAIN ! # ifdef __cplusplus ! extern "C" ! # endif ! int F77_DUMMY_MAIN() { return 1; } ! #endif ! int ! main () ! { ! connect (); ! ; ! return 0; ! } ! _ACEOF ! rm -f conftest.$ac_objext conftest$ac_exeext ! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ! (eval $ac_link) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } && ! { ac_try='test -s conftest$ac_exeext' ! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ! (eval $ac_try) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; }; then ! ac_cv_lib_socket_connect=yes ! else ! echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! ac_cv_lib_socket_connect=no ! fi ! rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext ! LIBS=$ac_check_lib_save_LIBS ! fi ! echo "$as_me:$LINENO: result: $ac_cv_lib_socket_connect" >&5 ! echo "${ECHO_T}$ac_cv_lib_socket_connect" >&6 ! if test $ac_cv_lib_socket_connect = yes; then ! X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS" ! fi ! ! fi ! ! # Guillermo Gomez says -lposix is necessary on A/UX. ! echo "$as_me:$LINENO: checking for remove" >&5 ! echo $ECHO_N "checking for remove... $ECHO_C" >&6 ! if test "${ac_cv_func_remove+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! #include "confdefs.h" ! /* System header to define __stub macros and hopefully few prototypes, ! which can conflict with char remove (); below. */ ! #include ! /* Override any gcc2 internal prototype to avoid an error. */ ! #ifdef __cplusplus ! extern "C" ! #endif ! /* We use char because int might match the return type of a gcc2 ! builtin and then its argument prototype would still apply. */ ! char remove (); ! char (*f) (); ! ! #ifdef F77_DUMMY_MAIN ! # ifdef __cplusplus ! extern "C" ! # endif ! int F77_DUMMY_MAIN() { return 1; } ! #endif ! int ! main () ! { ! /* The GNU C library defines this for functions which it implements ! to always fail with ENOSYS. Some functions are actually named ! something starting with __ and the normal name is an alias. */ ! #if defined (__stub_remove) || defined (__stub___remove) ! choke me ! #else ! f = remove; ! #endif ! ! ; ! return 0; ! } ! _ACEOF ! rm -f conftest.$ac_objext conftest$ac_exeext ! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ! (eval $ac_link) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } && ! { ac_try='test -s conftest$ac_exeext' ! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ! (eval $ac_try) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; }; then ! ac_cv_func_remove=yes ! else ! echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! ac_cv_func_remove=no ! fi ! rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext ! fi ! echo "$as_me:$LINENO: result: $ac_cv_func_remove" >&5 ! echo "${ECHO_T}$ac_cv_func_remove" >&6 ! ! if test $ac_cv_func_remove = no; then ! echo "$as_me:$LINENO: checking for remove in -lposix" >&5 ! echo $ECHO_N "checking for remove in -lposix... $ECHO_C" >&6 ! if test "${ac_cv_lib_posix_remove+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! ac_check_lib_save_LIBS=$LIBS ! LIBS="-lposix $LIBS" ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! #include "confdefs.h" ! ! /* Override any gcc2 internal prototype to avoid an error. */ ! #ifdef __cplusplus ! extern "C" ! #endif ! /* We use char because int might match the return type of a gcc2 ! builtin and then its argument prototype would still apply. */ ! char remove (); ! #ifdef F77_DUMMY_MAIN ! # ifdef __cplusplus ! extern "C" ! # endif ! int F77_DUMMY_MAIN() { return 1; } ! #endif ! int ! main () ! { ! remove (); ! ; ! return 0; ! } ! _ACEOF ! rm -f conftest.$ac_objext conftest$ac_exeext ! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ! (eval $ac_link) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } && ! { ac_try='test -s conftest$ac_exeext' ! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ! (eval $ac_try) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; }; then ! ac_cv_lib_posix_remove=yes ! else ! echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! ac_cv_lib_posix_remove=no ! fi ! rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext ! LIBS=$ac_check_lib_save_LIBS ! fi ! echo "$as_me:$LINENO: result: $ac_cv_lib_posix_remove" >&5 ! echo "${ECHO_T}$ac_cv_lib_posix_remove" >&6 ! if test $ac_cv_lib_posix_remove = yes; then ! X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix" ! fi ! ! fi ! ! # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. ! echo "$as_me:$LINENO: checking for shmat" >&5 ! echo $ECHO_N "checking for shmat... $ECHO_C" >&6 ! if test "${ac_cv_func_shmat+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! #include "confdefs.h" ! /* System header to define __stub macros and hopefully few prototypes, ! which can conflict with char shmat (); below. */ ! #include ! /* Override any gcc2 internal prototype to avoid an error. */ ! #ifdef __cplusplus ! extern "C" ! #endif ! /* We use char because int might match the return type of a gcc2 ! builtin and then its argument prototype would still apply. */ ! char shmat (); ! char (*f) (); ! ! #ifdef F77_DUMMY_MAIN ! # ifdef __cplusplus ! extern "C" ! # endif ! int F77_DUMMY_MAIN() { return 1; } ! #endif ! int ! main () ! { ! /* The GNU C library defines this for functions which it implements ! to always fail with ENOSYS. Some functions are actually named ! something starting with __ and the normal name is an alias. */ ! #if defined (__stub_shmat) || defined (__stub___shmat) ! choke me ! #else ! f = shmat; ! #endif ! ! ; ! return 0; ! } ! _ACEOF ! rm -f conftest.$ac_objext conftest$ac_exeext ! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ! (eval $ac_link) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } && ! { ac_try='test -s conftest$ac_exeext' ! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ! (eval $ac_try) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; }; then ! ac_cv_func_shmat=yes ! else ! echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! ac_cv_func_shmat=no ! fi ! rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext ! fi ! echo "$as_me:$LINENO: result: $ac_cv_func_shmat" >&5 ! echo "${ECHO_T}$ac_cv_func_shmat" >&6 ! ! if test $ac_cv_func_shmat = no; then ! echo "$as_me:$LINENO: checking for shmat in -lipc" >&5 ! echo $ECHO_N "checking for shmat in -lipc... $ECHO_C" >&6 ! if test "${ac_cv_lib_ipc_shmat+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! ac_check_lib_save_LIBS=$LIBS ! LIBS="-lipc $LIBS" ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! #include "confdefs.h" ! ! /* Override any gcc2 internal prototype to avoid an error. */ ! #ifdef __cplusplus ! extern "C" ! #endif ! /* We use char because int might match the return type of a gcc2 ! builtin and then its argument prototype would still apply. */ ! char shmat (); ! #ifdef F77_DUMMY_MAIN ! # ifdef __cplusplus ! extern "C" ! # endif ! int F77_DUMMY_MAIN() { return 1; } ! #endif ! int ! main () ! { ! shmat (); ! ; ! return 0; ! } ! _ACEOF ! rm -f conftest.$ac_objext conftest$ac_exeext ! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ! (eval $ac_link) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } && ! { ac_try='test -s conftest$ac_exeext' ! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ! (eval $ac_try) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; }; then ! ac_cv_lib_ipc_shmat=yes ! else ! echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! ac_cv_lib_ipc_shmat=no ! fi ! rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext ! LIBS=$ac_check_lib_save_LIBS ! fi ! echo "$as_me:$LINENO: result: $ac_cv_lib_ipc_shmat" >&5 ! echo "${ECHO_T}$ac_cv_lib_ipc_shmat" >&6 ! if test $ac_cv_lib_ipc_shmat = yes; then ! X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc" ! fi ! ! fi ! fi ! ! # Check for libraries that X11R6 Xt/Xaw programs need. ! ac_save_LDFLAGS=$LDFLAGS ! test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries" ! # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to ! # check for ICE first), but we must link in the order -lSM -lICE or ! # we get undefined symbols. So assume we have SM if we have ICE. ! # These have to be linked with before -lX11, unlike the other ! # libraries we check for below, so use a different variable. ! # John Interrante, Karl Berry ! echo "$as_me:$LINENO: checking for IceConnectionNumber in -lICE" >&5 ! echo $ECHO_N "checking for IceConnectionNumber in -lICE... $ECHO_C" >&6 ! if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! ac_check_lib_save_LIBS=$LIBS ! LIBS="-lICE $X_EXTRA_LIBS $LIBS" ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! #include "confdefs.h" ! ! /* Override any gcc2 internal prototype to avoid an error. */ ! #ifdef __cplusplus ! extern "C" ! #endif ! /* We use char because int might match the return type of a gcc2 ! builtin and then its argument prototype would still apply. */ ! char IceConnectionNumber (); ! #ifdef F77_DUMMY_MAIN ! # ifdef __cplusplus ! extern "C" ! # endif ! int F77_DUMMY_MAIN() { return 1; } ! #endif ! int ! main () ! { ! IceConnectionNumber (); ! ; ! return 0; ! } ! _ACEOF ! rm -f conftest.$ac_objext conftest$ac_exeext ! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ! (eval $ac_link) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } && ! { ac_try='test -s conftest$ac_exeext' ! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ! (eval $ac_try) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; }; then ! ac_cv_lib_ICE_IceConnectionNumber=yes ! else ! echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! ac_cv_lib_ICE_IceConnectionNumber=no ! fi ! rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext ! LIBS=$ac_check_lib_save_LIBS ! fi ! echo "$as_me:$LINENO: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5 ! echo "${ECHO_T}$ac_cv_lib_ICE_IceConnectionNumber" >&6 ! if test $ac_cv_lib_ICE_IceConnectionNumber = yes; then ! X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE" ! fi ! ! LDFLAGS=$ac_save_LDFLAGS ! ! fi ! ! if test "$X_DISPLAY_MISSING" != ""; then ! { { echo "$as_me:$LINENO: error: X11 not available" >&5 ! echo "$as_me: error: X11 not available" >&2;} ! { (exit 1); exit 1; }; } ! fi ! ! ! ! # Extract the first word of "gob2", so it can be a program name with args. ! set dummy gob2; ac_word=$2 ! echo "$as_me:$LINENO: checking for $ac_word" >&5 ! echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ! if test "${ac_cv_path_GOB2+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! case $GOB2 in ! [\\/]* | ?:[\\/]*) ! ac_cv_path_GOB2="$GOB2" # Let the user override the test with a path. ! ;; ! *) ! as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ! for as_dir in $PATH ! do ! IFS=$as_save_IFS ! test -z "$as_dir" && as_dir=. ! for ac_exec_ext in '' $ac_executable_extensions; do ! if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ! ac_cv_path_GOB2="$as_dir/$ac_word$ac_exec_ext" ! echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ! break 2 ! fi ! done ! done ! ! ;; ! esac ! fi ! GOB2=$ac_cv_path_GOB2 ! ! if test -n "$GOB2"; then ! echo "$as_me:$LINENO: result: $GOB2" >&5 ! echo "${ECHO_T}$GOB2" >&6 ! else ! echo "$as_me:$LINENO: result: no" >&5 ! echo "${ECHO_T}no" >&6 ! fi ! ! if test ! x$GOB2 = x; then ! if test ! x = x; then ! echo "$as_me:$LINENO: checking for gob-2 >= " >&5 ! echo $ECHO_N "checking for gob-2 >= ... $ECHO_C" >&6 ! g_r_ve=`echo |sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'` ! g_r_ma=`echo |sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'` ! g_r_mi=`echo |sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'` ! g_ve=`$GOB2 --version 2>&1|sed 's/Gob version \([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'` ! g_ma=`$GOB2 --version 2>&1|sed 's/Gob version \([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'` ! g_mi=`$GOB2 --version 2>&1|sed 's/Gob version \([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'` ! ! if test $g_ve -eq $g_r_ve; then ! if test $g_ma -ge $g_r_ma; then ! if test $g_mi -ge $g_r_mi; then ! echo "$as_me:$LINENO: result: ok" >&5 ! echo "${ECHO_T}ok" >&6 ! else ! if test $g_ma -gt $g_r_ma; then ! echo "$as_me:$LINENO: result: ok" >&5 ! echo "${ECHO_T}ok" >&6 ! else ! { { echo "$as_me:$LINENO: error: \"found $g_ve.$g_ma.$g_mi requires $g_r_ve.$g_r_ma.$g_r_mi\"" >&5 ! echo "$as_me: error: \"found $g_ve.$g_ma.$g_mi requires $g_r_ve.$g_r_ma.$g_r_mi\"" >&2;} ! { (exit 1); exit 1; }; } ! fi ! fi ! else ! { { echo "$as_me:$LINENO: error: \"found $g_ve.$g_ma.$g_mi requires $g_r_ve.$g_r_ma.$g_r_mi\"" >&5 ! echo "$as_me: error: \"found $g_ve.$g_ma.$g_mi requires $g_r_ve.$g_r_ma.$g_r_mi\"" >&2;} ! { (exit 1); exit 1; }; } ! fi ! else ! if test $g_ve -gt $g_r_ve; then ! echo "$as_me:$LINENO: result: ok" >&5 ! echo "${ECHO_T}ok" >&6 ! else ! { { echo "$as_me:$LINENO: error: major version $g_ve found but $g_r_ve required" >&5 ! echo "$as_me: error: major version $g_ve found but $g_r_ve required" >&2;} ! { (exit 1); exit 1; }; } ! fi ! fi ! ! unset gob_version ! unset g_ve ! unset g_ma ! unset g_mi ! unset g_r_ve ! unset g_r_ma ! unset g_r_mi ! fi ! ! ! else ! { echo "$as_me:$LINENO: WARNING: Cannot find GOB-2, check http://www.5z.com/jirka/gob.html" >&5 ! echo "$as_me: WARNING: Cannot find GOB-2, check http://www.5z.com/jirka/gob.html" >&2;} ! fi ! ! ! ! ! succeeded=no ! ! if test -z "$PKG_CONFIG"; then ! # Extract the first word of "pkg-config", so it can be a program name with args. ! set dummy pkg-config; ac_word=$2 ! echo "$as_me:$LINENO: checking for $ac_word" >&5 ! echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ! if test "${ac_cv_path_PKG_CONFIG+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! case $PKG_CONFIG in ! [\\/]* | ?:[\\/]*) ! ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. ! ;; ! *) ! as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ! for as_dir in $PATH ! do ! IFS=$as_save_IFS ! test -z "$as_dir" && as_dir=. ! for ac_exec_ext in '' $ac_executable_extensions; do ! if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ! ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" ! echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ! break 2 ! fi ! done ! done ! ! test -z "$ac_cv_path_PKG_CONFIG" && ac_cv_path_PKG_CONFIG="no" ! ;; ! esac ! fi ! PKG_CONFIG=$ac_cv_path_PKG_CONFIG ! ! if test -n "$PKG_CONFIG"; then ! echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5 ! echo "${ECHO_T}$PKG_CONFIG" >&6 ! else ! echo "$as_me:$LINENO: result: no" >&5 ! echo "${ECHO_T}no" >&6 ! fi ! ! fi ! ! if test "$PKG_CONFIG" = "no" ; then ! echo "*** The pkg-config script could not be found. Make sure it is" ! echo "*** in your path, or set the PKG_CONFIG environment variable" ! echo "*** to the full path to pkg-config." ! echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config." ! else ! PKG_CONFIG_MIN_VERSION=0.9.0 ! if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then ! echo "$as_me:$LINENO: checking for libgnomeui-2.0 libglade-2.0 libwnck-1.0 >= 2.1.5" >&5 ! echo $ECHO_N "checking for libgnomeui-2.0 libglade-2.0 libwnck-1.0 >= 2.1.5... $ECHO_C" >&6 ! ! if $PKG_CONFIG --exists "libgnomeui-2.0 libglade-2.0 libwnck-1.0 >= 2.1.5" ; then ! echo "$as_me:$LINENO: result: yes" >&5 ! echo "${ECHO_T}yes" >&6 ! succeeded=yes ! ! echo "$as_me:$LINENO: checking EXTRA_GNOME_CFLAGS" >&5 ! echo $ECHO_N "checking EXTRA_GNOME_CFLAGS... $ECHO_C" >&6 ! EXTRA_GNOME_CFLAGS=`$PKG_CONFIG --cflags "libgnomeui-2.0 libglade-2.0 libwnck-1.0 >= 2.1.5"` ! echo "$as_me:$LINENO: result: $EXTRA_GNOME_CFLAGS" >&5 ! echo "${ECHO_T}$EXTRA_GNOME_CFLAGS" >&6 ! ! echo "$as_me:$LINENO: checking EXTRA_GNOME_LIBS" >&5 ! echo $ECHO_N "checking EXTRA_GNOME_LIBS... $ECHO_C" >&6 ! EXTRA_GNOME_LIBS=`$PKG_CONFIG --libs "libgnomeui-2.0 libglade-2.0 libwnck-1.0 >= 2.1.5"` ! echo "$as_me:$LINENO: result: $EXTRA_GNOME_LIBS" >&5 ! echo "${ECHO_T}$EXTRA_GNOME_LIBS" >&6 ! else ! EXTRA_GNOME_CFLAGS="" ! EXTRA_GNOME_LIBS="" ! ## If we have a custom action on failure, don't print errors, but ! ## do set a variable so people can do so. ! EXTRA_GNOME_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libgnomeui-2.0 libglade-2.0 libwnck-1.0 >= 2.1.5"` ! echo $EXTRA_GNOME_PKG_ERRORS ! fi ! ! ! ! else ! echo "*** Your version of pkg-config is too old. You need version $PKG_CONFIG_MIN_VERSION or newer." ! echo "*** See http://www.freedesktop.org/software/pkgconfig" ! fi ! fi ! ! if test $succeeded = yes; then ! : ! else ! { { echo "$as_me:$LINENO: error: Library requirements (libgnomeui-2.0 libglade-2.0 libwnck-1.0 >= 2.1.5) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them." >&5 ! echo "$as_me: error: Library requirements (libgnomeui-2.0 libglade-2.0 libwnck-1.0 >= 2.1.5) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them." >&2;} ! { (exit 1); exit 1; }; } ! fi ! ! ! ! ! echo "$as_me:$LINENO: checking for l33tness" >&5 ! echo $ECHO_N "checking for l33tness... $ECHO_C" >&6 ! if test "`uname -n`x" = "dozox" ; then ! echo "$as_me:$LINENO: result: l33t like h4d3zZ" >&5 ! echo "${ECHO_T}l33t like h4d3zZ" >&6 ! else ! echo "$as_me:$LINENO: result: l4m3" >&5 ! echo "${ECHO_T}l4m3" >&6 ! fi ! ! # Extract the first word of "gconftool-2", so it can be a program name with args. ! set dummy gconftool-2; ac_word=$2 ! echo "$as_me:$LINENO: checking for $ac_word" >&5 ! echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ! if test "${ac_cv_path_GCONFTOOL+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! case $GCONFTOOL in ! [\\/]* | ?:[\\/]*) ! ac_cv_path_GCONFTOOL="$GCONFTOOL" # Let the user override the test with a path. ! ;; ! *) ! as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ! for as_dir in $PATH ! do ! IFS=$as_save_IFS ! test -z "$as_dir" && as_dir=. ! for ac_exec_ext in '' $ac_executable_extensions; do ! if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ! ac_cv_path_GCONFTOOL="$as_dir/$ac_word$ac_exec_ext" ! echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ! break 2 ! fi ! done ! done ! ! ;; ! esac ! fi ! GCONFTOOL=$ac_cv_path_GCONFTOOL ! ! if test -n "$GCONFTOOL"; then ! echo "$as_me:$LINENO: result: $GCONFTOOL" >&5 ! echo "${ECHO_T}$GCONFTOOL" >&6 ! else ! echo "$as_me:$LINENO: result: no" >&5 ! echo "${ECHO_T}no" >&6 ! fi ! ! ! if test "x$GCONF_SCHEMA_INSTALL_SOURCE" = "x"; then ! GCONF_SCHEMA_CONFIG_SOURCE=`gconftool-2 --get-default-source` ! else ! GCONF_SCHEMA_CONFIG_SOURCE=$GCONF_SCHEMA_INSTALL_SOURCE ! fi ! ! ! # Check whether --with-gconf-source or --without-gconf-source was given. ! if test "${with_gconf_source+set}" = set; then ! withval="$with_gconf_source" ! GCONF_SCHEMA_CONFIG_SOURCE="$withval" ! fi; ! ! ! echo "$as_me:$LINENO: result: Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation" >&5 ! echo "${ECHO_T}Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation" >&6 ! ! if test "x$GCONF_SCHEMA_FILE_DIR" = "x"; then ! GCONF_SCHEMA_FILE_DIR='$(sysconfdir)/gconf/schemas/' ! else ! GCONF_SCHEMA_FILE_DIR=$GCONF_SCHEMA_FILE_DIR ! fi ! ! ! # Check whether --with-gconf-schema-file-dir or --without-gconf-schema-file-dir was given. ! if test "${with_gconf_schema_file_dir+set}" = set; then ! withval="$with_gconf_schema_file_dir" ! GCONF_SCHEMA_FILE_DIR="$withval" ! fi; + echo "$as_me:$LINENO: result: Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files" >&5 + echo "${ECHO_T}Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files" >&6 + + # Check whether --enable-schemas-install or --disable-schemas-install was given. + if test "${enable_schemas_install+set}" = set; then + enableval="$enable_schemas_install" + case "${enableval}" in + yes) schemas_install=true ;; + no) schemas_install=false ;; + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for --disable-schemas-install" >&5 + echo "$as_me: error: bad value ${enableval} for --disable-schemas-install" >&2;} + { (exit 1); exit 1; }; } ;; + esac else ! schemas_install=true ! fi; + + if test x$schemas_install = xtrue; then + GCONF_SCHEMAS_INSTALL_TRUE= + GCONF_SCHEMAS_INSTALL_FALSE='#' + else + GCONF_SCHEMAS_INSTALL_TRUE='#' + GCONF_SCHEMAS_INSTALL_FALSE= fi + have_oss=no cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" #ifdef __NetBSD__ #include *************** *** 2888,2893 **** --- 4260,4271 ---- #include #endif + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif int main () { *************** *** 2915,2922 **** else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! fi rm -f conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: checking for OSS audio support" >&5 --- 4293,4299 ---- else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 fi rm -f conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: checking for OSS audio support" >&5 *************** *** 3046,3060 **** have_fb=no cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ #include #include int main () { --- 4423,4439 ---- have_fb=no cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" #include #include + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif int main () { *************** *** 3082,3089 **** else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! fi rm -f conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: checking for Brightness control support" >&5 --- 4461,4467 ---- else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 fi rm -f conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: checking for Brightness control support" >&5 *************** *** 3104,3117 **** have_xfree=no cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ #include int main () { --- 4482,4497 ---- have_xfree=no cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" #include + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif int main () { *************** *** 3139,3146 **** else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! fi rm -f conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: checking for X11 XFree86 headers" >&5 --- 4519,4525 ---- else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 fi rm -f conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: checking for X11 XFree86 headers" >&5 *************** *** 3160,3173 **** have_xsun=no cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ #include int main () { --- 4539,4554 ---- have_xsun=no cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" #include + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif int main () { *************** *** 3191,3475 **** echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ! have_xsun=yes ! ! else ! echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ! fi ! rm -f conftest.$ac_objext conftest.$ac_ext ! echo "$as_me:$LINENO: checking for X11 Sun headers" >&5 ! echo $ECHO_N "checking for X11 Sun headers... $ECHO_C" >&6 ! echo "$as_me:$LINENO: result: $have_xsun" >&5 ! echo "${ECHO_T}$have_xsun" >&6 ! ! ! if test x"$have_xsun" = "xyes"; then ! HAVE_XSUN_TRUE= ! HAVE_XSUN_FALSE='#' ! else ! HAVE_XSUN_TRUE='#' ! HAVE_XSUN_FALSE= ! fi ! ! if test x"$have_xsun" = "xno" && test x"$have_xfree" = "xno" ; then ! { { echo "$as_me:$LINENO: error: Your system doesn't have any headers for multimedia buttons" >&5 ! echo "$as_me: error: Your system doesn't have any headers for multimedia buttons" >&2;} ! { (exit 1); exit 1; }; } ! fi ! ! ALL_LINGUAS="am bg ca cs da de el es fi fr he hu it ja ko lv mk mn ms nl no pl pt pt_BR ro ru sl sk sq sv uk vi zh_CN zh_TW" ! ac_ext=c ! ac_cpp='$CPP $CPPFLAGS' ! ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ! ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ! ac_compiler_gnu=$ac_cv_c_compiler_gnu ! echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 ! echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 ! # On Suns, sometimes $CPP names a directory. ! if test -n "$CPP" && test -d "$CPP"; then ! CPP= ! fi ! if test -z "$CPP"; then ! if test "${ac_cv_prog_CPP+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! # Double quotes because CPP needs to be expanded ! for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" ! do ! ac_preproc_ok=false ! for ac_c_preproc_warn_flag in '' yes ! do ! # Use a header file that comes with gcc, so configuring glibc ! # with a fresh cross-compiler works. ! # Prefer to if __STDC__ is defined, since ! # exists even on freestanding compilers. ! # On the NeXT, cc -E runs the code through the compiler's parser, ! # not just through cpp. "Syntax error" is here to catch this case. ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ ! #ifdef __STDC__ ! # include ! #else ! # include ! #endif ! Syntax error ! _ACEOF ! if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 ! (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ! ac_status=$? ! grep -v '^ *+' conftest.er1 >conftest.err ! rm -f conftest.er1 ! cat conftest.err >&5 ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } >/dev/null; then ! if test -s conftest.err; then ! ac_cpp_err=$ac_c_preproc_warn_flag ! else ! ac_cpp_err= ! fi ! else ! ac_cpp_err=yes ! fi ! if test -z "$ac_cpp_err"; then ! : ! else ! echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ! # Broken: fails on valid input. ! continue ! fi ! rm -f conftest.err conftest.$ac_ext ! ! # OK, works on sane cases. Now check whether non-existent headers ! # can be detected and how. ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ ! #include ! _ACEOF ! if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 ! (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ! ac_status=$? ! grep -v '^ *+' conftest.er1 >conftest.err ! rm -f conftest.er1 ! cat conftest.err >&5 ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } >/dev/null; then ! if test -s conftest.err; then ! ac_cpp_err=$ac_c_preproc_warn_flag ! else ! ac_cpp_err= ! fi ! else ! ac_cpp_err=yes ! fi ! if test -z "$ac_cpp_err"; then ! # Broken: success on invalid input. ! continue ! else ! echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ! # Passes both tests. ! ac_preproc_ok=: ! break ! fi ! rm -f conftest.err conftest.$ac_ext ! ! done ! # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. ! rm -f conftest.err conftest.$ac_ext ! if $ac_preproc_ok; then ! break ! fi ! ! done ! ac_cv_prog_CPP=$CPP ! ! fi ! CPP=$ac_cv_prog_CPP ! else ! ac_cv_prog_CPP=$CPP ! fi ! echo "$as_me:$LINENO: result: $CPP" >&5 ! echo "${ECHO_T}$CPP" >&6 ! ac_preproc_ok=false ! for ac_c_preproc_warn_flag in '' yes ! do ! # Use a header file that comes with gcc, so configuring glibc ! # with a fresh cross-compiler works. ! # Prefer to if __STDC__ is defined, since ! # exists even on freestanding compilers. ! # On the NeXT, cc -E runs the code through the compiler's parser, ! # not just through cpp. "Syntax error" is here to catch this case. ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ ! #ifdef __STDC__ ! # include ! #else ! # include ! #endif ! Syntax error ! _ACEOF ! if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 ! (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ! ac_status=$? ! grep -v '^ *+' conftest.er1 >conftest.err ! rm -f conftest.er1 ! cat conftest.err >&5 ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } >/dev/null; then ! if test -s conftest.err; then ! ac_cpp_err=$ac_c_preproc_warn_flag ! else ! ac_cpp_err= ! fi ! else ! ac_cpp_err=yes ! fi ! if test -z "$ac_cpp_err"; then ! : ! else ! echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ! # Broken: fails on valid input. ! continue ! fi ! rm -f conftest.err conftest.$ac_ext ! ! # OK, works on sane cases. Now check whether non-existent headers ! # can be detected and how. ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ ! #include ! _ACEOF ! if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 ! (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ! ac_status=$? ! grep -v '^ *+' conftest.er1 >conftest.err ! rm -f conftest.er1 ! cat conftest.err >&5 ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } >/dev/null; then ! if test -s conftest.err; then ! ac_cpp_err=$ac_c_preproc_warn_flag ! else ! ac_cpp_err= ! fi ! else ! ac_cpp_err=yes ! fi ! if test -z "$ac_cpp_err"; then ! # Broken: success on invalid input. ! continue ! else ! echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ! # Passes both tests. ! ac_preproc_ok=: ! break ! fi ! rm -f conftest.err conftest.$ac_ext ! ! done ! # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. ! rm -f conftest.err conftest.$ac_ext ! if $ac_preproc_ok; then ! : else ! { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check ! See \`config.log' for more details." >&5 ! echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check ! See \`config.log' for more details." >&2;} ! { (exit 1); exit 1; }; } fi ! ! ac_ext=c ! ac_cpp='$CPP $CPPFLAGS' ! ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ! ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ! ac_compiler_gnu=$ac_cv_c_compiler_gnu ! echo "$as_me:$LINENO: checking for egrep" >&5 ! echo $ECHO_N "checking for egrep... $ECHO_C" >&6 ! if test "${ac_cv_prog_egrep+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 else ! if echo a | (grep -E '(a|b)') >/dev/null 2>&1 ! then ac_cv_prog_egrep='grep -E' ! else ac_cv_prog_egrep='egrep' ! fi fi - echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 - echo "${ECHO_T}$ac_cv_prog_egrep" >&6 - EGREP=$ac_cv_prog_egrep echo "$as_me:$LINENO: checking for ANSI C header files" >&5 echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 if test "${ac_cv_header_stdc+set}" = set; then --- 4572,4605 ---- echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ! have_xsun=yes ! else ! echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 fi ! rm -f conftest.$ac_objext conftest.$ac_ext ! echo "$as_me:$LINENO: checking for X11 Sun headers" >&5 ! echo $ECHO_N "checking for X11 Sun headers... $ECHO_C" >&6 ! echo "$as_me:$LINENO: result: $have_xsun" >&5 ! echo "${ECHO_T}$have_xsun" >&6 ! if test x"$have_xsun" = "xyes"; then ! HAVE_XSUN_TRUE= ! HAVE_XSUN_FALSE='#' else ! HAVE_XSUN_TRUE='#' ! HAVE_XSUN_FALSE= fi + if test x"$have_xsun" = "xno" && test x"$have_xfree" = "xno" ; then + { { echo "$as_me:$LINENO: error: Your system doesn't have any headers for multimedia buttons" >&5 + echo "$as_me: error: Your system doesn't have any headers for multimedia buttons" >&2;} + { (exit 1); exit 1; }; } + fi + ALL_LINGUAS="am bg ca cs da de el es fi fr he hu it ja ko lv mk mn ms nl no pl pt pt_BR ro ru sl sk sq sv uk vi zh_CN zh_TW" echo "$as_me:$LINENO: checking for ANSI C header files" >&5 echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 if test "${ac_cv_header_stdc+set}" = set; then *************** *** 3477,3535 **** else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ #include #include #include #include - int - main () - { - - ; - return 0; - } _ACEOF ! rm -f conftest.$ac_objext ! if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ! (eval $ac_compile) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } && ! { ac_try='test -s conftest.$ac_objext' ! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ! (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; }; then ac_cv_header_stdc=yes else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ! ac_cv_header_stdc=no fi ! rm -f conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | ! $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no --- 4607,4654 ---- else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" #include #include #include #include _ACEOF ! if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 ! (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? + egrep -v '^ *\+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } >/dev/null; then ! if test -s conftest.err; then ! ac_cpp_err=$ac_c_preproc_warn_flag ! else ! ac_cpp_err= ! fi ! else ! ac_cpp_err=yes ! fi ! if test -z "$ac_cpp_err"; then ac_cv_header_stdc=yes else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! ac_cv_header_stdc=no fi ! rm -f conftest.err conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | ! egrep "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no *************** *** 3542,3557 **** # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | ! $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no --- 4661,4672 ---- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | ! egrep "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no *************** *** 3567,3584 **** else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else ! # define ISLOWER(c) \ ! (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) --- 4682,4694 ---- else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else ! # define ISLOWER(c) (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) *************** *** 3611,3622 **** else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ( exit $ac_status ) ac_cv_header_stdc=no fi ! rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi fi --- 4721,4731 ---- else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_header_stdc=no fi ! rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi fi *************** *** 3651,3661 **** else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ $ac_includes_default #include <$ac_header> --- 4760,4766 ---- else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" $ac_includes_default #include <$ac_header> *************** *** 3675,3682 **** eval "$as_ac_Header=yes" else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! eval "$as_ac_Header=no" fi rm -f conftest.$ac_objext conftest.$ac_ext --- 4780,4786 ---- eval "$as_ac_Header=yes" else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 eval "$as_ac_Header=no" fi rm -f conftest.$ac_objext conftest.$ac_ext *************** *** 3712,3722 **** echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF --- 4816,4822 ---- echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" $ac_includes_default #include <$ac_header> _ACEOF *************** *** 3735,3742 **** ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ac_header_compiler=no fi rm -f conftest.$ac_objext conftest.$ac_ext --- 4835,4841 ---- ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.$ac_objext conftest.$ac_ext *************** *** 3748,3764 **** echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? ! grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 --- 4847,4859 ---- echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? ! egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 *************** *** 3775,3782 **** ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext --- 4870,4876 ---- ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext *************** *** 3789,3820 **** { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 ! echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} ! ( ! cat <<\_ASBOX ! ## ------------------------------------ ## ! ## Report this to bug-autoconf@gnu.org. ## ! ## ------------------------------------ ## ! _ASBOX ! ) | ! sed "s/^/$as_me: WARNING: /" >&2 ! ;; no:yes ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 ! echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} ! ( ! cat <<\_ASBOX ! ## ------------------------------------ ## ! ## Report this to bug-autoconf@gnu.org. ## ! ## ------------------------------------ ## ! _ASBOX ! ) | ! sed "s/^/$as_me: WARNING: /" >&2 ! ;; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 --- 4883,4896 ---- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 ! echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; no:yes ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 ! echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 *************** *** 3844,3855 **** else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ #include int main () { --- 4920,4933 ---- else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" #include + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif int main () { *************** *** 3873,3880 **** am_cv_val_LC_MESSAGES=yes else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! am_cv_val_LC_MESSAGES=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext --- 4951,4957 ---- am_cv_val_LC_MESSAGES=yes else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 am_cv_val_LC_MESSAGES=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext *************** *** 3912,3922 **** echo $ECHO_N "checking libintl.h usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ $ac_includes_default #include _ACEOF --- 4989,4995 ---- echo $ECHO_N "checking libintl.h usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" $ac_includes_default #include _ACEOF *************** *** 3935,3942 **** ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ac_header_compiler=no fi rm -f conftest.$ac_objext conftest.$ac_ext --- 5008,5014 ---- ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.$ac_objext conftest.$ac_ext *************** *** 3948,3964 **** echo $ECHO_N "checking libintl.h presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? ! grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 --- 5020,5032 ---- echo $ECHO_N "checking libintl.h presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? ! egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 *************** *** 3975,3982 **** ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext --- 5043,5049 ---- ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext *************** *** 3989,4020 **** { echo "$as_me:$LINENO: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the preprocessor's result" >&5 ! echo "$as_me: WARNING: libintl.h: proceeding with the preprocessor's result" >&2;} ! ( ! cat <<\_ASBOX ! ## ------------------------------------ ## ! ## Report this to bug-autoconf@gnu.org. ## ! ## ------------------------------------ ## ! _ASBOX ! ) | ! sed "s/^/$as_me: WARNING: /" >&2 ! ;; no:yes ) { echo "$as_me:$LINENO: WARNING: libintl.h: present but cannot be compiled" >&5 echo "$as_me: WARNING: libintl.h: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: libintl.h: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: libintl.h: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the preprocessor's result" >&5 ! echo "$as_me: WARNING: libintl.h: proceeding with the preprocessor's result" >&2;} ! ( ! cat <<\_ASBOX ! ## ------------------------------------ ## ! ## Report this to bug-autoconf@gnu.org. ## ! ## ------------------------------------ ## ! _ASBOX ! ) | ! sed "s/^/$as_me: WARNING: /" >&2 ! ;; esac echo "$as_me:$LINENO: checking for libintl.h" >&5 echo $ECHO_N "checking for libintl.h... $ECHO_C" >&6 --- 5056,5069 ---- { echo "$as_me:$LINENO: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the preprocessor's result" >&5 ! echo "$as_me: WARNING: libintl.h: proceeding with the preprocessor's result" >&2;};; no:yes ) { echo "$as_me:$LINENO: WARNING: libintl.h: present but cannot be compiled" >&5 echo "$as_me: WARNING: libintl.h: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: libintl.h: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: libintl.h: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the preprocessor's result" >&5 ! echo "$as_me: WARNING: libintl.h: proceeding with the preprocessor's result" >&2;};; esac echo "$as_me:$LINENO: checking for libintl.h" >&5 echo $ECHO_N "checking for libintl.h... $ECHO_C" >&6 *************** *** 4041,4054 **** else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ #include int main () { --- 5090,5105 ---- else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" #include + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif int main () { *************** *** 4072,4079 **** gt_cv_func_dgettext_libc=yes else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! gt_cv_func_dgettext_libc=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext --- 5123,5129 ---- gt_cv_func_dgettext_libc=yes else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 gt_cv_func_dgettext_libc=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext *************** *** 4094,4137 **** else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ /* System header to define __stub macros and hopefully few prototypes, ! which can conflict with char $ac_func (); below. ! Prefer to if __STDC__ is defined, since ! exists even on freestanding compilers. */ ! #ifdef __STDC__ ! # include ! #else ! # include ! #endif /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" - { #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else ! char (*f) () = $ac_func; ! #endif ! #ifdef __cplusplus ! } #endif - int - main () - { - return f != $ac_func; ; return 0; } --- 5144,5180 ---- else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, ! which can conflict with char $ac_func (); below. */ ! #include /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func (); + char (*f) (); + + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif + int + main () + { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else ! f = $ac_func; #endif ; return 0; } *************** *** 4151,4158 **** eval "$as_ac_var=yes" else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! eval "$as_ac_var=no" fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext --- 5194,5200 ---- eval "$as_ac_var=yes" else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext *************** *** 4184,4194 **** LIBS="-lintl $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus --- 5226,5232 ---- LIBS="-lintl $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus *************** *** 4197,4202 **** --- 5235,5246 ---- /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char bindtextdomain (); + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif int main () { *************** *** 4220,4227 **** ac_cv_lib_intl_bindtextdomain=yes else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ac_cv_lib_intl_bindtextdomain=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext --- 5264,5270 ---- ac_cv_lib_intl_bindtextdomain=yes else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ac_cv_lib_intl_bindtextdomain=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext *************** *** 4239,4249 **** LIBS="-lintl $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus --- 5282,5288 ---- LIBS="-lintl $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus *************** *** 4252,4257 **** --- 5291,5302 ---- /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char dgettext (); + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif int main () { *************** *** 4275,4282 **** ac_cv_lib_intl_dgettext=yes else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ac_cv_lib_intl_dgettext=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext --- 5320,5326 ---- ac_cv_lib_intl_dgettext=yes else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ac_cv_lib_intl_dgettext=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext *************** *** 4305,4315 **** LIBS="-lintl -liconv $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus --- 5349,5355 ---- LIBS="-lintl -liconv $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus *************** *** 4318,4323 **** --- 5358,5369 ---- /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char dcgettext (); + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif int main () { *************** *** 4341,4348 **** ac_cv_lib_intl_dcgettext=yes else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ac_cv_lib_intl_dcgettext=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext --- 5387,5393 ---- ac_cv_lib_intl_dcgettext=yes else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ac_cv_lib_intl_dcgettext=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext *************** *** 4379,4422 **** else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ /* System header to define __stub macros and hopefully few prototypes, ! which can conflict with char $ac_func (); below. ! Prefer to if __STDC__ is defined, since ! exists even on freestanding compilers. */ ! #ifdef __STDC__ ! # include ! #else ! # include ! #endif /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" - { #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else ! char (*f) () = $ac_func; ! #endif ! #ifdef __cplusplus ! } #endif - int - main () - { - return f != $ac_func; ; return 0; } --- 5424,5460 ---- else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, ! which can conflict with char $ac_func (); below. */ ! #include /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func (); + char (*f) (); + + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif + int + main () + { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else ! f = $ac_func; #endif ; return 0; } *************** *** 4436,4443 **** eval "$as_ac_var=yes" else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! eval "$as_ac_var=no" fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext --- 5474,5480 ---- eval "$as_ac_var=yes" else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext *************** *** 4526,4569 **** else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ /* System header to define __stub macros and hopefully few prototypes, ! which can conflict with char $ac_func (); below. ! Prefer to if __STDC__ is defined, since ! exists even on freestanding compilers. */ ! #ifdef __STDC__ ! # include ! #else ! # include ! #endif /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" - { #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else ! char (*f) () = $ac_func; ! #endif ! #ifdef __cplusplus ! } #endif - int - main () - { - return f != $ac_func; ; return 0; } --- 5563,5599 ---- else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, ! which can conflict with char $ac_func (); below. */ ! #include /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func (); + char (*f) (); + + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif + int + main () + { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else ! f = $ac_func; #endif ; return 0; } *************** *** 4583,4590 **** eval "$as_ac_var=yes" else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! eval "$as_ac_var=no" fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext --- 5613,5619 ---- eval "$as_ac_var=yes" else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext *************** *** 4677,4688 **** cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ int main () { --- 5706,5719 ---- cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" ! #include "confdefs.h" + #ifdef F77_DUMMY_MAIN + # ifdef __cplusplus + extern "C" + # endif + int F77_DUMMY_MAIN() { return 1; } + #endif int main () { *************** *** 4708,4720 **** DATADIRNAME=share else echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! CATOBJEXT=.mo DATADIRNAME=lib fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext INSTOBJEXT=.mo fi fi --- 5739,5752 ---- DATADIRNAME=share else echo "$as_me: failed program was:" >&5 ! cat conftest.$ac_ext >&5 CATOBJEXT=.mo DATADIRNAME=lib fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext INSTOBJEXT=.mo + else + gt_cv_have_gettext=no fi fi *************** *** 4743,4749 **** # We need to process the po/ directory. POSUB=po ! ac_config_commands="$ac_config_commands default-3" for lang in $ALL_LINGUAS; do --- 5775,5781 ---- # We need to process the po/ directory. POSUB=po ! ac_config_commands="$ac_config_commands default-3" for lang in $ALL_LINGUAS; do *************** *** 4809,4815 **** < $srcdir/po/POTFILES.in > po/POTFILES ! ac_config_files="$ac_config_files Makefile acme.spec src/Makefile po/Makefile.in" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure --- 5841,5847 ---- < $srcdir/po/POTFILES.in > po/POTFILES ! ac_config_files="$ac_config_files Makefile acme.spec src/Makefile po/Makefile.in" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure *************** *** 4820,4826 **** # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # ! # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. --- 5852,5858 ---- # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # ! # `ac_cv_env_foo' variables (set or unset) will be overriden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. *************** *** 4855,4861 **** t end /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ : end' >>confcache ! if diff $cache_file confcache >/dev/null 2>&1; then :; else if test -w $cache_file; then test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" cat confcache >$cache_file --- 5887,5893 ---- t end /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ : end' >>confcache ! if cmp -s $cache_file confcache; then :; else if test -w $cache_file; then test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" cat confcache >$cache_file *************** *** 4886,4906 **** DEFS=-DHAVE_CONFIG_H - ac_libobjs= - ac_ltlibobjs= - for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_i=`echo "$ac_i" | - sed 's/\$U\././;s/\.o$//;s/\.obj$//'` - # 2. Add them. - ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" - ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' - done - LIBOBJS=$ac_libobjs - - LTLIBOBJS=$ac_ltlibobjs - - mv -f po/POTFILES po/POTFILES.tmp --- 5918,5923 ---- *************** *** 4922,4933 **** # configure, is in config.log if it exists. debug=false - ac_cs_recheck=false - ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## --- 5939,5949 ---- # configure, is in config.log if it exists. debug=false SHELL=\${CONFIG_SHELL-$SHELL} _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF + ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## *************** *** 4936,4948 **** if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi # Support unset when possible. if (FOO=FOO; unset FOO) >/dev/null 2>&1; then as_unset=unset --- 5952,5962 ---- if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi + # NLS nuisances. # Support unset when possible. if (FOO=FOO; unset FOO) >/dev/null 2>&1; then as_unset=unset *************** *** 4950,4991 **** as_unset=false fi ! ! # Work around bugs in pre-3.0 UWIN ksh. ! $as_unset ENV MAIL MAILPATH ! PS1='$ ' ! PS2='> ' ! PS4='+ ' ! ! # NLS nuisances. ! for as_var in \ ! LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ ! LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ ! LC_TELEPHONE LC_TIME ! do ! if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then ! eval $as_var=C; export $as_var ! else ! $as_unset $as_var ! fi ! done ! ! # Required to use basename. ! if expr a : '\(a\)' >/dev/null 2>&1; then ! as_expr=expr ! else ! as_expr=false ! fi ! ! if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then ! as_basename=basename ! else ! as_basename=false ! fi # Name of the executable. ! as_me=`$as_basename "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ --- 5964,5997 ---- as_unset=false fi ! (set +x; test -n "`(LANG=C; export LANG) 2>&1`") && ! { $as_unset LANG || test "${LANG+set}" != set; } || ! { LANG=C; export LANG; } ! (set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") && ! { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } || ! { LC_ALL=C; export LC_ALL; } ! (set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") && ! { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } || ! { LC_TIME=C; export LC_TIME; } ! (set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") && ! { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } || ! { LC_CTYPE=C; export LC_CTYPE; } ! (set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") && ! { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } || ! { LANGUAGE=C; export LANGUAGE; } ! (set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") && ! { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } || ! { LC_COLLATE=C; export LC_COLLATE; } ! (set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") && ! { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } || ! { LC_NUMERIC=C; export LC_NUMERIC; } ! (set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") && ! { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } || ! { LC_MESSAGES=C; export LC_MESSAGES; } # Name of the executable. ! as_me=`(basename "$0") 2>/dev/null || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ *************** *** 4996,5002 **** /^X\/\(\/\).*/{ s//\1/; q; } s/.*/./; q'` - # PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' --- 6002,6007 ---- *************** *** 5007,5021 **** # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then ! echo "#! /bin/sh" >conf$$.sh ! echo "exit 0" >>conf$$.sh ! chmod +x conf$$.sh ! if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi ! rm -f conf$$.sh fi --- 6012,6026 ---- # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then ! echo "#! /bin/sh" >conftest.sh ! echo "exit 0" >>conftest.sh ! chmod +x conftest.sh ! if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi ! rm -f conftest.sh fi *************** *** 5064,5071 **** as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } CONFIG_SHELL=$as_dir/$as_base export CONFIG_SHELL exec "$CONFIG_SHELL" "$0" ${1+"$@"} --- 6069,6074 ---- *************** *** 5139,5150 **** fi rm -f conf$$ conf$$.exe conf$$.file - if mkdir -p . 2>/dev/null; then - as_mkdir_p=: - else - as_mkdir_p=false - fi - as_executable_p="test -f" # Sed expression to map a string onto a valid CPP name. --- 6142,6147 ---- *************** *** 5161,5167 **** IFS=" $as_nl" # CDPATH. ! $as_unset CDPATH exec 6>&1 --- 6158,6164 ---- IFS=" $as_nl" # CDPATH. ! $as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; } exec 6>&1 *************** *** 5178,5184 **** cat >&5 <<_CSEOF This file was extended by acme $as_me 2.0.2, which was ! generated by GNU Autoconf 2.57. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS --- 6175,6181 ---- cat >&5 <<_CSEOF This file was extended by acme $as_me 2.0.2, which was ! generated by GNU Autoconf 2.53. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS *************** *** 5218,5224 **** -h, --help print this help, then exit -V, --version print version number, then exit - -q, --quiet do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] --- 6215,6220 ---- *************** *** 5241,5247 **** cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\\ acme config.status 2.0.2 ! configured by $0, generated by GNU Autoconf 2.57, with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 --- 6237,6243 ---- cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\\ acme config.status 2.0.2 ! configured by $0, generated by GNU Autoconf 2.53, with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 *************** *** 5262,5286 **** --*=*) ac_option=`expr "x$1" : 'x\([^=]*\)='` ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` ! ac_shift=: ! ;; ! -*) ! ac_option=$1 ! ac_optarg=$2 ! ac_shift=shift ;; *) # This is not an option, so the user has probably given explicit # arguments. - ac_option=$1 ac_need_defaults=false;; esac ! case $ac_option in # Handling of the options. _ACEOF ! cat >>$CONFIG_STATUS <<\_ACEOF -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ! ac_cs_recheck=: ;; --version | --vers* | -V ) echo "$ac_cs_version"; exit 0 ;; --he | --h) --- 6258,6282 ---- --*=*) ac_option=`expr "x$1" : 'x\([^=]*\)='` ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` ! shift ! set dummy "$ac_option" "$ac_optarg" ${1+"$@"} ! shift ;; + -*);; *) # This is not an option, so the user has probably given explicit # arguments. ac_need_defaults=false;; esac ! case $1 in # Handling of the options. _ACEOF ! cat >>$CONFIG_STATUS <<_ACEOF -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ! echo "running $SHELL $0 " $ac_configure_args " --no-create --no-recursion" ! exec $SHELL $0 $ac_configure_args --no-create --no-recursion ;; ! _ACEOF ! cat >>$CONFIG_STATUS <<\_ACEOF --version | --vers* | -V ) echo "$ac_cs_version"; exit 0 ;; --he | --h) *************** *** 5295,5310 **** --debug | --d* | -d ) debug=: ;; --file | --fil | --fi | --f ) ! $ac_shift ! CONFIG_FILES="$CONFIG_FILES $ac_optarg" ac_need_defaults=false;; --header | --heade | --head | --hea ) ! $ac_shift ! CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" ac_need_defaults=false;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; # This is an error. -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 --- 6291,6303 ---- --debug | --d* | -d ) debug=: ;; --file | --fil | --fi | --f ) ! shift ! CONFIG_FILES="$CONFIG_FILES $1" ac_need_defaults=false;; --header | --heade | --head | --hea ) ! shift ! CONFIG_HEADERS="$CONFIG_HEADERS $1" ac_need_defaults=false;; # This is an error. -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 *************** *** 5319,5338 **** shift done - ac_configure_extra_args= - - if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" - fi - - _ACEOF - cat >>$CONFIG_STATUS <<_ACEOF - if \$ac_cs_recheck; then - echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 - exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - fi - _ACEOF cat >>$CONFIG_STATUS <<_ACEOF --- 6312,6317 ---- *************** *** 5340,5347 **** # INIT-COMMANDS section. # - INTLTOOL_PERL=${INTLTOOL_PERL} _ACEOF --- 6319,6327 ---- # INIT-COMMANDS section. # INTLTOOL_PERL=${INTLTOOL_PERL} + AMDEP_TRUE="$AMDEP_TRUE" + ac_aux_dir="$ac_aux_dir" _ACEOF *************** *** 5377,5385 **** test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi - # Have a temporary directory for convenience. Make it in the build tree - # simply because there is no reason to put it here, and in addition, - # creating and moving files from /tmp can sometimes cause problems. # Create a temporary directory, and hook for its removal unless debugging. $debug || { --- 6357,6362 ---- *************** *** 5388,5404 **** } # Create a (secure) tmp directory for tmp files. ! { ! tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { ! tmp=./confstat$$-$RANDOM (umask 077 && mkdir $tmp) } || { ! echo "$me: cannot create a temporary directory in ." >&2 { (exit 1); exit 1; } } --- 6365,6381 ---- } # Create a (secure) tmp directory for tmp files. ! : ${TMPDIR=/tmp} { ! tmp=`(umask 077 && mktemp -d -q "$TMPDIR/csXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { ! tmp=$TMPDIR/cs$$-$RANDOM (umask 077 && mkdir $tmp) } || { ! echo "$me: cannot create a temporary directory in $TMPDIR" >&2 { (exit 1); exit 1; } } *************** *** 5451,5462 **** --- 6428,6449 ---- s,@INSTALL_DATA@,$INSTALL_DATA,;t t s,@PACKAGE@,$PACKAGE,;t t s,@VERSION@,$VERSION,;t t + s,@EXEEXT@,$EXEEXT,;t t + s,@OBJEXT@,$OBJEXT,;t t s,@ACLOCAL@,$ACLOCAL,;t t s,@AUTOCONF@,$AUTOCONF,;t t s,@AUTOMAKE@,$AUTOMAKE,;t t s,@AUTOHEADER@,$AUTOHEADER,;t t s,@MAKEINFO@,$MAKEINFO,;t t + s,@AMTAR@,$AMTAR,;t t + s,@install_sh@,$install_sh,;t t + s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t + s,@AWK@,$AWK,;t t s,@SET_MAKE@,$SET_MAKE,;t t + s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t + s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t + s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t + s,@DEPDIR@,$DEPDIR,;t t s,@GETTEXT_PACKAGE@,$GETTEXT_PACKAGE,;t t s,@INTLTOOL_DESKTOP_RULE@,$INTLTOOL_DESKTOP_RULE,;t t s,@INTLTOOL_DIRECTORY_RULE@,$INTLTOOL_DIRECTORY_RULE,;t t *************** *** 5476,5481 **** --- 6463,6481 ---- s,@INTLTOOL_MERGE@,$INTLTOOL_MERGE,;t t s,@INTLTOOL_UPDATE@,$INTLTOOL_UPDATE,;t t s,@INTLTOOL_PERL@,$INTLTOOL_PERL,;t t + s,@CC@,$CC,;t t + s,@CFLAGS@,$CFLAGS,;t t + s,@LDFLAGS@,$LDFLAGS,;t t + s,@CPPFLAGS@,$CPPFLAGS,;t t + s,@ac_ct_CC@,$ac_ct_CC,;t t + s,@am__include@,$am__include,;t t + s,@am__quote@,$am__quote,;t t + s,@CCDEPMODE@,$CCDEPMODE,;t t + s,@CPP@,$CPP,;t t + s,@X_CFLAGS@,$X_CFLAGS,;t t + s,@X_PRE_LIBS@,$X_PRE_LIBS,;t t + s,@X_LIBS@,$X_LIBS,;t t + s,@X_EXTRA_LIBS@,$X_EXTRA_LIBS,;t t s,@GOB2@,$GOB2,;t t s,@PKG_CONFIG@,$PKG_CONFIG,;t t s,@EXTRA_GNOME_CFLAGS@,$EXTRA_GNOME_CFLAGS,;t t *************** *** 5483,5495 **** s,@GCONFTOOL@,$GCONFTOOL,;t t s,@GCONF_SCHEMA_CONFIG_SOURCE@,$GCONF_SCHEMA_CONFIG_SOURCE,;t t s,@GCONF_SCHEMA_FILE_DIR@,$GCONF_SCHEMA_FILE_DIR,;t t ! s,@CC@,$CC,;t t ! s,@CFLAGS@,$CFLAGS,;t t ! s,@LDFLAGS@,$LDFLAGS,;t t ! s,@CPPFLAGS@,$CPPFLAGS,;t t ! s,@ac_ct_CC@,$ac_ct_CC,;t t ! s,@EXEEXT@,$EXEEXT,;t t ! s,@OBJEXT@,$OBJEXT,;t t s,@HAVE_OSS_TRUE@,$HAVE_OSS_TRUE,;t t s,@HAVE_OSS_FALSE@,$HAVE_OSS_FALSE,;t t s,@ALSA_CFLAGS@,$ALSA_CFLAGS,;t t --- 6483,6490 ---- s,@GCONFTOOL@,$GCONFTOOL,;t t s,@GCONF_SCHEMA_CONFIG_SOURCE@,$GCONF_SCHEMA_CONFIG_SOURCE,;t t s,@GCONF_SCHEMA_FILE_DIR@,$GCONF_SCHEMA_FILE_DIR,;t t ! s,@GCONF_SCHEMAS_INSTALL_TRUE@,$GCONF_SCHEMAS_INSTALL_TRUE,;t t ! s,@GCONF_SCHEMAS_INSTALL_FALSE@,$GCONF_SCHEMAS_INSTALL_FALSE,;t t s,@HAVE_OSS_TRUE@,$HAVE_OSS_TRUE,;t t s,@HAVE_OSS_FALSE@,$HAVE_OSS_FALSE,;t t s,@ALSA_CFLAGS@,$ALSA_CFLAGS,;t t *************** *** 5502,5509 **** s,@HAVE_XFREE_FALSE@,$HAVE_XFREE_FALSE,;t t s,@HAVE_XSUN_TRUE@,$HAVE_XSUN_TRUE,;t t s,@HAVE_XSUN_FALSE@,$HAVE_XSUN_FALSE,;t t - s,@CPP@,$CPP,;t t - s,@EGREP@,$EGREP,;t t s,@USE_NLS@,$USE_NLS,;t t s,@MSGFMT@,$MSGFMT,;t t s,@GMSGFMT@,$GMSGFMT,;t t --- 6497,6502 ---- *************** *** 5519,5526 **** s,@POFILES@,$POFILES,;t t s,@POSUB@,$POSUB,;t t s,@MKINSTALLDIRS@,$MKINSTALLDIRS,;t t - s,@LIBOBJS@,$LIBOBJS,;t t - s,@LTLIBOBJS@,$LTLIBOBJS,;t t CEOF _ACEOF --- 6512,6517 ---- *************** *** 5591,5620 **** /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` ! { if $as_mkdir_p; then ! mkdir -p "$ac_dir" ! else ! as_dir="$ac_dir" ! as_dirs= ! while test ! -d "$as_dir"; do ! as_dirs="$as_dir $as_dirs" ! as_dir=`(dirname "$as_dir") 2>/dev/null || ! $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ! X"$as_dir" : 'X\(//\)[^/]' \| \ ! X"$as_dir" : 'X\(//\)$' \| \ ! X"$as_dir" : 'X\(/\)' \| \ ! . : '\(.\)' 2>/dev/null || ! echo X"$as_dir" | ! sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } ! /^X\(\/\/\)[^/].*/{ s//\1/; q; } ! /^X\(\/\/\)$/{ s//\1/; q; } ! /^X\(\/\).*/{ s//\1/; q; } ! s/.*/./; q'` ! done ! test ! -n "$as_dirs" || mkdir $as_dirs ! fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 ! echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} ! { (exit 1); exit 1; }; }; } ac_builddir=. --- 6582,6606 ---- /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` ! { case "$ac_dir" in ! [\\/]* | ?:[\\/]* ) as_incr_dir=;; ! *) as_incr_dir=.;; ! esac ! as_dummy="$ac_dir" ! for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do ! case $as_mkdir_dir in ! # Skip DOS drivespec ! ?:) as_incr_dir=$as_mkdir_dir ;; ! *) ! as_incr_dir=$as_incr_dir/$as_mkdir_dir ! test -d "$as_incr_dir" || ! mkdir "$as_incr_dir" || ! { { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5 ! echo "$as_me: error: cannot create \"$ac_dir\"" >&2;} ! { (exit 1); exit 1; }; } ! ;; ! esac ! done; } ac_builddir=. *************** *** 5644,5650 **** # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be # absolute. ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` ! ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` --- 6630,6636 ---- # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be # absolute. ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` ! ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd` ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` *************** *** 5834,5840 **** # Break up conftest.defines because some shells have a limit on the size # of here documents, and old seds have small limits too (100 cmds). echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS ! echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS echo ' :' >>$CONFIG_STATUS rm -f conftest.tail --- 6820,6826 ---- # Break up conftest.defines because some shells have a limit on the size # of here documents, and old seds have small limits too (100 cmds). echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS ! echo ' if egrep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS echo ' :' >>$CONFIG_STATUS rm -f conftest.tail *************** *** 5858,5864 **** mv conftest.tail conftest.defines done rm -f conftest.defines ! echo ' fi # grep' >>$CONFIG_STATUS echo >>$CONFIG_STATUS # Break up conftest.undefs because some shells have a limit on the size --- 6844,6850 ---- mv conftest.tail conftest.defines done rm -f conftest.defines ! echo ' fi # egrep' >>$CONFIG_STATUS echo >>$CONFIG_STATUS # Break up conftest.undefs because some shells have a limit on the size *************** *** 5898,5904 **** cat $tmp/in >>$tmp/config.h rm -f $tmp/in if test x"$ac_file" != x-; then ! if diff $ac_file $tmp/config.h >/dev/null 2>&1; then { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 echo "$as_me: $ac_file is unchanged" >&6;} else --- 6884,6890 ---- cat $tmp/in >>$tmp/config.h rm -f $tmp/in if test x"$ac_file" != x-; then ! if cmp -s $ac_file $tmp/config.h 2>/dev/null; then { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 echo "$as_me: $ac_file is unchanged" >&6;} else *************** *** 5914,5943 **** /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` ! { if $as_mkdir_p; then ! mkdir -p "$ac_dir" ! else ! as_dir="$ac_dir" ! as_dirs= ! while test ! -d "$as_dir"; do ! as_dirs="$as_dir $as_dirs" ! as_dir=`(dirname "$as_dir") 2>/dev/null || ! $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ! X"$as_dir" : 'X\(//\)[^/]' \| \ ! X"$as_dir" : 'X\(//\)$' \| \ ! X"$as_dir" : 'X\(/\)' \| \ ! . : '\(.\)' 2>/dev/null || ! echo X"$as_dir" | ! sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } ! /^X\(\/\/\)[^/].*/{ s//\1/; q; } ! /^X\(\/\/\)$/{ s//\1/; q; } ! /^X\(\/\).*/{ s//\1/; q; } ! s/.*/./; q'` ! done ! test ! -n "$as_dirs" || mkdir $as_dirs ! fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 ! echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} ! { (exit 1); exit 1; }; }; } rm -f $ac_file mv $tmp/config.h $ac_file --- 6900,6924 ---- /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` ! { case "$ac_dir" in ! [\\/]* | ?:[\\/]* ) as_incr_dir=;; ! *) as_incr_dir=.;; ! esac ! as_dummy="$ac_dir" ! for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do ! case $as_mkdir_dir in ! # Skip DOS drivespec ! ?:) as_incr_dir=$as_mkdir_dir ;; ! *) ! as_incr_dir=$as_incr_dir/$as_mkdir_dir ! test -d "$as_incr_dir" || ! mkdir "$as_incr_dir" || ! { { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5 ! echo "$as_me: error: cannot create \"$ac_dir\"" >&2;} ! { (exit 1); exit 1; }; } ! ;; ! esac ! done; } rm -f $ac_file mv $tmp/config.h $ac_file *************** *** 5946,5951 **** --- 6927,6938 ---- cat $tmp/config.h rm -f $tmp/config.h fi + # Run the commands associated with the file. + case $ac_file in + config.h ) # update the timestamp + echo timestamp >"./stamp-h1" + ;; + esac done _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF *************** *** 5996,6002 **** # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be # absolute. ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` ! ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` --- 6983,6989 ---- # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be # absolute. ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` ! ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd` ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` *************** *** 6004,6011 **** { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 echo "$as_me: executing $ac_dest commands" >&6;} case $ac_dest in ! default-1 ) test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h ;; ! default-2 ) sed -e "s:@INTLTOOL_PERL@:${INTLTOOL_PERL}:;" < ${srcdir}/intltool-extract.in > intltool-extract.out if cmp -s intltool-extract intltool-extract.out 2>/dev/null; then --- 6991,6997 ---- { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 echo "$as_me: executing $ac_dest commands" >&6;} case $ac_dest in ! default-1 ) sed -e "s:@INTLTOOL_PERL@:${INTLTOOL_PERL}:;" < ${srcdir}/intltool-extract.in > intltool-extract.out if cmp -s intltool-extract intltool-extract.out 2>/dev/null; then *************** *** 6035,6040 **** --- 7021,7065 ---- chmod u+w intltool-update ;; + default-2 ) + test x"$AMDEP_TRUE" != x"" || + for mf in $CONFIG_FILES; do + case "$mf" in + Makefile) dirpart=.;; + */Makefile) dirpart=`echo "$mf" | sed -e 's|/[^/]*$||'`;; + *) continue;; + esac + grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue + # Extract the definition of DEP_FILES from the Makefile without + # running `make'. + DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"` + test -z "$DEPDIR" && continue + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n -e '/^U = / s///p' < "$mf"` + test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" + # We invoke sed twice because it is the simplest approach to + # changing $(DEPDIR) to its actual value in the expansion. + for file in `sed -n -e ' + /^DEP_FILES = .*\\\\$/ { + s/^DEP_FILES = // + :loop + s/\\\\$// + p + n + /\\\\$/ b loop + p + } + /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`echo "$file" | sed -e 's|/[^/]*$||'` + $ac_aux_dir/mkinstalldirs "$dirpart/$fdir" > /dev/null 2>&1 + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done + ;; default-3 ) case "$CONFIG_FILES" in *po/Makefile.in*) sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile esac ;; *************** *** 6060,6070 **** # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null ! $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. --- 7085,7092 ---- # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: exec 5>/dev/null ! $SHELL $CONFIG_STATUS || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. diff -crN ./acme/install-sh /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./acme/install-sh *** ./acme/install-sh Mon Aug 12 06:16:11 2002 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./acme/install-sh Sun Aug 10 00:04:03 2003 *************** *** 163,169 **** # Skip lots of stat calls in the usual case. if [ ! -d "$dstdir" ]; then ! defaultIFS=' ' IFS="${IFS-${defaultIFS}}" --- 163,169 ---- # Skip lots of stat calls in the usual case. if [ ! -d "$dstdir" ]; then ! defaultIFS=' ' IFS="${IFS-${defaultIFS}}" *************** *** 196,202 **** if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && ! if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi else --- 196,202 ---- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && ! if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst || true; else true ; fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi else *************** *** 237,243 **** if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && ! if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && # Now rename the file to the real destination. --- 237,243 ---- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && ! if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp || true; else true;fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && # Now rename the file to the real destination. diff -crN ./acme/intltool-merge.in /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./acme/intltool-merge.in *** ./acme/intltool-merge.in Sun Feb 2 01:17:09 2003 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./acme/intltool-merge.in Sun Aug 10 00:03:49 2003 *************** *** 3,9 **** # # The Intltool Message Merger # ! # Copyright (C) 2000, 2003 Free Software Foundation. # Copyright (C) 2000, 2001 Eazel, Inc # # Intltool is free software; you can redistribute it and/or --- 3,9 ---- # # The Intltool Message Merger # ! # Copyright (C) 2000, 2002 Free Software Foundation. # Copyright (C) 2000, 2001 Eazel, Inc # # Intltool is free software; you can redistribute it and/or *************** *** 226,232 **** sub get_local_charset { my ($encoding) = @_; ! my $alias_file = $ENV{"G_CHARSET_ALIAS"} || "/home/hadess/garnome//lib/charset.alias"; # seek character encoding aliases in charset.alias (glib) --- 226,232 ---- sub get_local_charset { my ($encoding) = @_; ! my $alias_file = $ENV{"G_CHARSET_ALIAS"} || "/opt/freeware/lib/charset.alias"; # seek character encoding aliases in charset.alias (glib) *************** *** 364,371 **** } else { - print "WARNING: $po_file is not in UTF-8 but $encoding, converting...\n"; - my $iconv = $ENV{"INTLTOOL_ICONV"} || "iconv"; open PO_FILE, "$iconv -f $encoding -t UTF-8 $po_file|"; } --- 364,369 ---- *************** *** 458,468 **** return $_; } - - # entity_encode: (string) - # - # Encode the given string to XML format (encode '<' etc). It also - # encodes high bit if not in UTF-8 mode. sub entity_encode { --- 456,461 ---- *************** *** 476,482 **** } else { - # with UTF-8 we only encode minimalistic return join ('', map (&entity_encode_int_minimalist, @list_of_chars)); } } --- 469,474 ---- diff -crN ./acme/intltool-update.in /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./acme/intltool-update.in *** ./acme/intltool-update.in Sun Feb 2 01:17:09 2003 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./acme/intltool-update.in Sun Aug 10 00:03:49 2003 *************** *** 512,518 **** # Perform merge, remove backup file and the "messages" trash file # generated by gettext ! system ("msgmerge", "-o", "$lang.po", "$lang.po.old", "$MODULE.pot"); unlink "$lang.po.old"; unlink "messages"; } --- 512,518 ---- # Perform merge, remove backup file and the "messages" trash file # generated by gettext ! system ("msgmerge", "$lang.po.old", "$MODULE.pot", "-o", "$lang.po"); unlink "$lang.po.old"; unlink "messages"; } diff -crN ./acme/missing /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./acme/missing *** ./acme/missing Mon Aug 12 06:16:11 2002 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./acme/missing Sun Aug 10 00:04:04 2003 *************** *** 1,7 **** #! /bin/sh # Common stub for a few missing GNU programs while installing. ! # Copyright (C) 1996, 1997, 2001, 2002 Free Software Foundation, Inc. ! # Franc,ois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by --- 1,7 ---- #! /bin/sh # Common stub for a few missing GNU programs while installing. ! # Copyright 1996, 1997, 1999, 2000 Free Software Foundation, Inc. ! # Originally by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by *************** *** 18,37 **** # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. if test $# -eq 0; then echo 1>&2 "Try \`$0 --help' for more information" exit 1 fi # In the cases where this matters, `missing' is being run in the # srcdir already. ! if test -f configure.in; then configure_ac=configure.ac else configure_ac=configure.in fi case "$1" in -h|--h|--he|--hel|--help) echo "\ --- 18,55 ---- # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. + # As a special exception to the GNU General Public License, if you + # distribute this file as part of a program that contains a + # configuration script generated by Autoconf, you may include it under + # the same distribution terms that you use for the rest of that program. + if test $# -eq 0; then echo 1>&2 "Try \`$0 --help' for more information" exit 1 fi + run=: + # In the cases where this matters, `missing' is being run in the # srcdir already. ! if test -f configure.ac; then configure_ac=configure.ac else configure_ac=configure.in fi case "$1" in + --run) + # Try to run requested program, and just exit if it succeeds. + run= + shift + "$@" && exit 0 + ;; + esac + + # If it does not exist, or fails to run (possibly an outdated version), + # try to emulate it. + case "$1" in -h|--h|--he|--hel|--help) echo "\ *************** *** 43,48 **** --- 61,67 ---- Options: -h, --help display this help and exit -v, --version output version information and exit + --run try to run the given command, and emulate it if it fails Supported PROGRAM values: aclocal touch file \`aclocal.m4' *************** *** 51,63 **** automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file yacc create \`y.tab.[ch]', if possible, from existing .[ch]" ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) ! echo "missing - GNU libit 0.0" ;; -*) --- 70,84 ---- automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c + help2man touch the output file lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file + tar try tar, gnutar, gtar, then tar without non-portable flags yacc create \`y.tab.[ch]', if possible, from existing .[ch]" ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) ! echo "missing 0.3 - GNU automake" ;; -*) *************** *** 66,75 **** exit 1 ;; ! aclocal*) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if ! you modified \`acinclude.m4' or \`$configure_ac'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." touch aclocal.m4 --- 87,96 ---- exit 1 ;; ! aclocal) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if ! you modified \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." touch aclocal.m4 *************** *** 78,84 **** autoconf) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if ! you modified \`$configure_ac'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch configure --- 99,105 ---- autoconf) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if ! you modified \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch configure *************** *** 87,96 **** autoheader) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if ! you modified \`acconfig.h' or \`$configure_ac'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." ! files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' $configure_ac` test -z "$files" && files="config.h" touch_files= for f in $files; do --- 108,117 ---- autoheader) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if ! you modified \`acconfig.h' or \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." ! files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` test -z "$files" && files="config.h" touch_files= for f in $files; do *************** *** 103,112 **** touch $touch_files ;; ! automake*) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if ! you modified \`Makefile.am', \`acinclude.m4' or \`$configure_ac'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print | --- 124,133 ---- touch $touch_files ;; ! automake) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if ! you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print | *************** *** 167,173 **** --- 188,219 ---- fi ;; + help2man) + echo 1>&2 "\ + WARNING: \`$1' is missing on your system. You should only need it if + you modified a dependency of a manual page. You may need the + \`Help2man' package in order for those modifications to take + effect. You can get \`Help2man' from any GNU archive site." + + file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + if test -z "$file"; then + file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` + fi + if [ -f "$file" ]; then + touch $file + else + test -z "$file" || exec >$file + echo ".ab help2man is required to generate this page" + exit 1 + fi + ;; + makeinfo) + if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then + # We have makeinfo, but it failed. + exit 1 + fi + echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file *************** *** 183,188 **** --- 229,273 ---- touch $file ;; + tar) + shift + if test -n "$run"; then + echo 1>&2 "ERROR: \`tar' requires --run" + exit 1 + fi + + # We have already tried tar in the generic part. + # Look for gnutar/gtar before invocation to avoid ugly error + # messages. + if (gnutar --version > /dev/null 2>&1); then + gnutar ${1+"$@"} && exit 0 + fi + if (gtar --version > /dev/null 2>&1); then + gtar ${1+"$@"} && exit 0 + fi + firstarg="$1" + if shift; then + case "$firstarg" in + *o*) + firstarg=`echo "$firstarg" | sed s/o//` + tar "$firstarg" ${1+"$@"} && exit 0 + ;; + esac + case "$firstarg" in + *h*) + firstarg=`echo "$firstarg" | sed s/h//` + tar "$firstarg" ${1+"$@"} && exit 0 + ;; + esac + fi + + echo 1>&2 "\ + WARNING: I can't seem to be able to run \`tar' with the given arguments. + You may want to install GNU tar or Free paxutils, or check the + command line arguments." + exit 1 + ;; + *) echo 1>&2 "\ WARNING: \`$1' is needed, and you do not seem to have it handy on your diff -crN ./acme/src/Makefile.in /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./acme/src/Makefile.in *** ./acme/src/Makefile.in Sun Feb 2 01:34:00 2003 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./acme/src/Makefile.in Sun Aug 10 00:04:05 2003 *************** *** 1,6 **** ! # Makefile.in generated automatically by automake 1.4-p6 from Makefile.am ! # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. --- 1,7 ---- ! # Makefile.in generated automatically by automake 1.5 from Makefile.am. ! # Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 ! # Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. *************** *** 10,15 **** --- 11,17 ---- # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. + @SET_MAKE@ SHELL = @SHELL@ *************** *** 31,43 **** mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include - - DESTDIR = - pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ - top_builddir = .. ACLOCAL = @ACLOCAL@ --- 33,41 ---- *************** *** 46,56 **** AUTOHEADER = @AUTOHEADER@ INSTALL = @INSTALL@ ! INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ transform = @program_transform_name@ - NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : --- 44,54 ---- AUTOHEADER = @AUTOHEADER@ INSTALL = @INSTALL@ ! INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ + INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : *************** *** 58,67 **** --- 56,69 ---- PRE_UNINSTALL = : POST_UNINSTALL = : ALSA_LIBS = @ALSA_LIBS@ + AMTAR = @AMTAR@ + AWK = @AWK@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ DATADIRNAME = @DATADIRNAME@ + DEPDIR = @DEPDIR@ + EXEEXT = @EXEEXT@ EXTRA_GNOME_CFLAGS = @EXTRA_GNOME_CFLAGS@ EXTRA_GNOME_LIBS = @EXTRA_GNOME_LIBS@ GCONFTOOL = @GCONFTOOL@ *************** *** 71,76 **** --- 73,79 ---- GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GOB2 = @GOB2@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ *************** *** 91,98 **** INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ - MAKEINFO = @MAKEINFO@ MKINSTALLDIRS = @MKINSTALLDIRS@ PACKAGE = @PACKAGE@ PKG_CONFIG = @PKG_CONFIG@ POFILES = @POFILES@ --- 94,101 ---- INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ MKINSTALLDIRS = @MKINSTALLDIRS@ + OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PKG_CONFIG = @PKG_CONFIG@ POFILES = @POFILES@ *************** *** 101,108 **** --- 104,119 ---- PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ + X_CFLAGS = @X_CFLAGS@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ + am__include = @am__include@ + am__quote = @am__quote@ + install_sh = @install_sh@ @HAVE_ALSA_TRUE@ALSA_CFLAGS = -DHAVE_ALSA + ALSA_CFLAGS = @ALSA_CFLAGS@ @HAVE_ALSA_TRUE@ALSA_files = volume-alsa.c volume-alsa.h volume-alsa-private.h @HAVE_ALSA_TRUE@ALSA_gob_files = volume-alsa.gob *************** *** 114,137 **** @HAVE_FB_TRUE@FB_files = fb-level.c fb-level.h fb-level-private.h @HAVE_FB_TRUE@FB_gob_files = fb-level.gob ! INCLUDES = $(EXTRA_GNOME_CFLAGS) $(ALSA_CFLAGS) $(OSS_CFLAGS) $(FB_CFLAGS) -DACME_DATA=\""$(datadir)/acme/"\" -DGNOMELOCALEDIR=\""$(datadir)/locale"\" -DWNCK_I_KNOW_THIS_IS_UNSTABLE -DG_DISABLE_DEPRECATED -DGDK_DISABLE_DEPRECATED -DGTK_DISABLE_DEPRECATED -DGNOME_DISABLE_DEPRECATED bin_PROGRAMS = acme acme-properties ! BUILT_SOURCES = volume-alsa.c volume-alsa.h volume-alsa-private.h volume-oss.c volume-oss.h volume-oss-private.h g-volume.c g-volume.h g-volume-private.h fb-level.c fb-level.h fb-level-private.h ! ! ! BUILT_files_unconditional = g-volume.c g-volume.h g-volume-private.h ! ! ! acme_SOURCES = $(ALSA_gob_files) $(OSS_gob_files) $(FB_gob_files) g-volume.gob $(ALSA_files) $(OSS_files) $(FB_files) $(BUILT_files_unconditional) eggtrayicon.h eggtrayicon.c acme.c acme.h ! ! ! acme_LDFLAGS = $(EXTRA_GNOME_LIBS) $(ALSA_LIBS) $(INTLLIBS) ! ! ! acme_properties_SOURCES = acme-properties.c eggcellrendererkeys.c eggcellrendererkeys.h eggaccelerators.h eggaccelerators.c CLEANFILES = $(BUILT_SOURCES) *.bak *.gladep $(desktop_DATA) $(schema_DATA) --- 125,177 ---- @HAVE_FB_TRUE@FB_files = fb-level.c fb-level.h fb-level-private.h @HAVE_FB_TRUE@FB_gob_files = fb-level.gob ! INCLUDES = \ ! $(EXTRA_GNOME_CFLAGS) \ ! $(ALSA_CFLAGS) $(OSS_CFLAGS) $(FB_CFLAGS) \ ! -DACME_DATA=\""$(datadir)/acme/"\" \ ! -DGNOMELOCALEDIR=\""$(datadir)/locale"\" \ ! -DWNCK_I_KNOW_THIS_IS_UNSTABLE \ ! -DG_DISABLE_DEPRECATED -DGDK_DISABLE_DEPRECATED \ ! -DGTK_DISABLE_DEPRECATED -DGNOME_DISABLE_DEPRECATED bin_PROGRAMS = acme acme-properties ! BUILT_SOURCES = \ ! volume-alsa.c volume-alsa.h volume-alsa-private.h \ ! volume-oss.c volume-oss.h volume-oss-private.h \ ! g-volume.c g-volume.h g-volume-private.h \ ! fb-level.c fb-level.h fb-level-private.h ! ! ! BUILT_files_unconditional = \ ! g-volume.c g-volume.h g-volume-private.h ! ! ! acme_SOURCES = \ ! $(ALSA_gob_files) $(OSS_gob_files) \ ! $(FB_gob_files) \ ! g-volume.gob \ ! $(ALSA_files) $(OSS_files) $(FB_files) \ ! $(BUILT_files_unconditional) \ ! eggtrayicon.h eggtrayicon.c \ ! acme.c acme.h ! ! ! acme_LDFLAGS = \ ! $(EXTRA_GNOME_LIBS) \ ! $(ALSA_LIBS) \ ! $(INTLLIBS) \ ! $(X_LIBS) \ ! -lX11 ! ! ! acme_properties_SOURCES = \ ! acme-properties.c \ ! eggcellrendererkeys.c \ ! eggcellrendererkeys.h \ ! eggaccelerators.h \ ! eggaccelerators.c CLEANFILES = $(BUILT_SOURCES) *.bak *.gladep $(desktop_DATA) $(schema_DATA) *************** *** 141,154 **** EGGDIR1 = $(srcdir)/../../libegg/libegg/treeviewutils/ EGGDIR2 = $(srcdir)/../../libegg/libegg/tray/ ! acme_properties_LDFLAGS = $(EXTRA_GNOME_LIBS) $(INTLLIBS) ! EXTRA_DIST = $(Data_DATA) $(schema_in_files) $(BUILT_SOURCES) $(EGGFILES1) $(EGGFILES2) $(desktop_in_files) fb-level.gob g-volume.gob volume-alsa.gob volume-oss.gob Datadir = $(datadir)/acme/ ! Data_DATA = acme.glade acme-properties.glade gnome-speakernotes-muted.png gnome-speakernotes.png acme-brightness.png acme-eject.png acme-48.png acme-16.png schema_in_files = acme.schemas.in --- 181,213 ---- EGGDIR1 = $(srcdir)/../../libegg/libegg/treeviewutils/ EGGDIR2 = $(srcdir)/../../libegg/libegg/tray/ ! acme_properties_LDFLAGS = \ ! $(EXTRA_GNOME_LIBS) \ ! $(INTLLIBS) \ ! $(X_LIBS) \ ! -lX11 ! EXTRA_DIST = \ ! $(Data_DATA) \ ! $(schema_in_files) \ ! $(BUILT_SOURCES) \ ! $(EGGFILES1) \ ! $(EGGFILES2) \ ! $(desktop_in_files) \ ! fb-level.gob g-volume.gob volume-alsa.gob volume-oss.gob Datadir = $(datadir)/acme/ ! Data_DATA = \ ! acme.glade \ ! acme-properties.glade \ ! gnome-speakernotes-muted.png \ ! gnome-speakernotes.png \ ! acme-brightness.png \ ! acme-eject.png \ ! acme-48.png \ ! acme-16.png schema_in_files = acme.schemas.in *************** *** 158,475 **** desktop_in_files = acme.desktop.in desktopdir = $(datadir)/control-center-2.0/capplets desktop_DATA = $(desktop_in_files:.desktop.in=.desktop) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs ! CONFIG_HEADER = ../config.h ! CONFIG_CLEAN_FILES = ! PROGRAMS = $(bin_PROGRAMS) ! ! DEFS = @DEFS@ -I. -I$(srcdir) -I.. CPPFLAGS = @CPPFLAGS@ LDFLAGS = @LDFLAGS@ LIBS = @LIBS@ ! @HAVE_ALSA_FALSE@@HAVE_OSS_FALSE@@HAVE_FB_TRUE@acme_OBJECTS = \ ! @HAVE_ALSA_FALSE@@HAVE_OSS_FALSE@@HAVE_FB_TRUE@fb-level.o g-volume.o \ ! @HAVE_ALSA_FALSE@@HAVE_OSS_FALSE@@HAVE_FB_TRUE@eggtrayicon.o acme.o ! @HAVE_ALSA_FALSE@@HAVE_OSS_TRUE@@HAVE_FB_TRUE@acme_OBJECTS = \ ! @HAVE_ALSA_FALSE@@HAVE_OSS_TRUE@@HAVE_FB_TRUE@volume-oss.o fb-level.o \ ! @HAVE_ALSA_FALSE@@HAVE_OSS_TRUE@@HAVE_FB_TRUE@g-volume.o eggtrayicon.o \ ! @HAVE_ALSA_FALSE@@HAVE_OSS_TRUE@@HAVE_FB_TRUE@acme.o ! @HAVE_ALSA_TRUE@@HAVE_OSS_FALSE@@HAVE_FB_TRUE@acme_OBJECTS = \ ! @HAVE_ALSA_TRUE@@HAVE_OSS_FALSE@@HAVE_FB_TRUE@volume-alsa.o fb-level.o \ ! @HAVE_ALSA_TRUE@@HAVE_OSS_FALSE@@HAVE_FB_TRUE@g-volume.o eggtrayicon.o \ ! @HAVE_ALSA_TRUE@@HAVE_OSS_FALSE@@HAVE_FB_TRUE@acme.o ! @HAVE_ALSA_TRUE@@HAVE_OSS_TRUE@@HAVE_FB_TRUE@acme_OBJECTS = \ ! @HAVE_ALSA_TRUE@@HAVE_OSS_TRUE@@HAVE_FB_TRUE@volume-alsa.o volume-oss.o \ ! @HAVE_ALSA_TRUE@@HAVE_OSS_TRUE@@HAVE_FB_TRUE@fb-level.o g-volume.o \ ! @HAVE_ALSA_TRUE@@HAVE_OSS_TRUE@@HAVE_FB_TRUE@eggtrayicon.o acme.o ! @HAVE_ALSA_FALSE@@HAVE_OSS_FALSE@@HAVE_FB_FALSE@acme_OBJECTS = \ ! @HAVE_ALSA_FALSE@@HAVE_OSS_FALSE@@HAVE_FB_FALSE@g-volume.o \ ! @HAVE_ALSA_FALSE@@HAVE_OSS_FALSE@@HAVE_FB_FALSE@eggtrayicon.o acme.o ! @HAVE_ALSA_TRUE@@HAVE_OSS_FALSE@@HAVE_FB_FALSE@acme_OBJECTS = \ ! @HAVE_ALSA_TRUE@@HAVE_OSS_FALSE@@HAVE_FB_FALSE@volume-alsa.o g-volume.o \ ! @HAVE_ALSA_TRUE@@HAVE_OSS_FALSE@@HAVE_FB_FALSE@eggtrayicon.o acme.o ! @HAVE_ALSA_FALSE@@HAVE_OSS_TRUE@@HAVE_FB_FALSE@acme_OBJECTS = \ ! @HAVE_ALSA_FALSE@@HAVE_OSS_TRUE@@HAVE_FB_FALSE@volume-oss.o g-volume.o \ ! @HAVE_ALSA_FALSE@@HAVE_OSS_TRUE@@HAVE_FB_FALSE@eggtrayicon.o acme.o ! @HAVE_ALSA_TRUE@@HAVE_OSS_TRUE@@HAVE_FB_FALSE@acme_OBJECTS = \ ! @HAVE_ALSA_TRUE@@HAVE_OSS_TRUE@@HAVE_FB_FALSE@volume-alsa.o \ ! @HAVE_ALSA_TRUE@@HAVE_OSS_TRUE@@HAVE_FB_FALSE@volume-oss.o g-volume.o \ ! @HAVE_ALSA_TRUE@@HAVE_OSS_TRUE@@HAVE_FB_FALSE@eggtrayicon.o acme.o ! acme_LDADD = $(LDADD) ! acme_DEPENDENCIES = ! acme_properties_OBJECTS = acme-properties.o eggcellrendererkeys.o \ ! eggaccelerators.o ! acme_properties_LDADD = $(LDADD) ! acme_properties_DEPENDENCIES = ! CFLAGS = @CFLAGS@ ! COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) ! LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ ! DATA = $(Data_DATA) $(desktop_DATA) $(schema_DATA) ! ! DIST_COMMON = Makefile.am Makefile.in ! ! ! DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) ! TAR = tar ! GZIP_ENV = --best SOURCES = $(acme_SOURCES) $(acme_properties_SOURCES) - OBJECTS = $(acme_OBJECTS) $(acme_properties_OBJECTS) - - all: all-redirect - .SUFFIXES: - .SUFFIXES: .S .c .o .s - $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/Makefile - - Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status ! mostlyclean-binPROGRAMS: ! ! clean-binPROGRAMS: ! -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) ! ! distclean-binPROGRAMS: ! ! maintainer-clean-binPROGRAMS: ! install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(bindir) @list='$(bin_PROGRAMS)'; for p in $$list; do \ ! if test -f $$p; then \ ! echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \ ! $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ else :; fi; \ done uninstall-binPROGRAMS: @$(NORMAL_UNINSTALL) ! list='$(bin_PROGRAMS)'; for p in $$list; do \ ! rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ done ! .c.o: ! $(COMPILE) -c $< ! ! .s.o: ! $(COMPILE) -c $< ! ! .S.o: ! $(COMPILE) -c $< mostlyclean-compile: ! -rm -f *.o core *.core ! ! clean-compile: distclean-compile: -rm -f *.tab.c ! maintainer-clean-compile: ! ! acme: $(acme_OBJECTS) $(acme_DEPENDENCIES) ! @rm -f acme ! $(LINK) $(acme_LDFLAGS) $(acme_OBJECTS) $(acme_LDADD) $(LIBS) ! ! acme-properties: $(acme_properties_OBJECTS) $(acme_properties_DEPENDENCIES) ! @rm -f acme-properties ! $(LINK) $(acme_properties_LDFLAGS) $(acme_properties_OBJECTS) $(acme_properties_LDADD) $(LIBS) install-DataDATA: $(Data_DATA) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(Datadir) @list='$(Data_DATA)'; for p in $$list; do \ ! if test -f $(srcdir)/$$p; then \ ! echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(Datadir)/$$p"; \ ! $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(Datadir)/$$p; \ ! else if test -f $$p; then \ ! echo " $(INSTALL_DATA) $$p $(DESTDIR)$(Datadir)/$$p"; \ ! $(INSTALL_DATA) $$p $(DESTDIR)$(Datadir)/$$p; \ ! fi; fi; \ done uninstall-DataDATA: @$(NORMAL_UNINSTALL) ! list='$(Data_DATA)'; for p in $$list; do \ ! rm -f $(DESTDIR)$(Datadir)/$$p; \ done - install-desktopDATA: $(desktop_DATA) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(desktopdir) @list='$(desktop_DATA)'; for p in $$list; do \ ! if test -f $(srcdir)/$$p; then \ ! echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(desktopdir)/$$p"; \ ! $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(desktopdir)/$$p; \ ! else if test -f $$p; then \ ! echo " $(INSTALL_DATA) $$p $(DESTDIR)$(desktopdir)/$$p"; \ ! $(INSTALL_DATA) $$p $(DESTDIR)$(desktopdir)/$$p; \ ! fi; fi; \ done uninstall-desktopDATA: @$(NORMAL_UNINSTALL) ! list='$(desktop_DATA)'; for p in $$list; do \ ! rm -f $(DESTDIR)$(desktopdir)/$$p; \ done - install-schemaDATA: $(schema_DATA) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(schemadir) @list='$(schema_DATA)'; for p in $$list; do \ ! if test -f $(srcdir)/$$p; then \ ! echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(schemadir)/$$p"; \ ! $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(schemadir)/$$p; \ ! else if test -f $$p; then \ ! echo " $(INSTALL_DATA) $$p $(DESTDIR)$(schemadir)/$$p"; \ ! $(INSTALL_DATA) $$p $(DESTDIR)$(schemadir)/$$p; \ ! fi; fi; \ done uninstall-schemaDATA: @$(NORMAL_UNINSTALL) ! list='$(schema_DATA)'; for p in $$list; do \ ! rm -f $(DESTDIR)$(schemadir)/$$p; \ done tags: TAGS ! ID: $(HEADERS) $(SOURCES) $(LISP) ! list='$(SOURCES) $(HEADERS)'; \ ! unique=`for i in $$list; do echo $$i; done | \ ! awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ ! here=`pwd` && cd $(srcdir) \ ! && mkid -f$$here/ID $$unique $(LISP) ! TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ ! list='$(SOURCES) $(HEADERS)'; \ ! unique=`for i in $$list; do echo $$i; done | \ ! awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ ! || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP)) ! mostlyclean-tags: ! ! clean-tags: distclean-tags: ! -rm -f TAGS ID ! ! maintainer-clean-tags: ! distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) ! subdir = src distdir: $(DISTFILES) @for file in $(DISTFILES); do \ ! d=$(srcdir); \ if test -d $$d/$$file; then \ ! cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ ! || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ ! || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done - acme-properties.o: acme-properties.c ../config.h acme.h \ - eggcellrendererkeys.h eggaccelerators.h - acme.o: acme.c ../config.h eggtrayicon.h acme.h g-volume.h fb-level.h - eggaccelerators.o: eggaccelerators.c eggaccelerators.h - eggcellrendererkeys.o: eggcellrendererkeys.c ../config.h \ - eggcellrendererkeys.h eggaccelerators.h - eggtrayicon.o: eggtrayicon.c eggtrayicon.h - fb-level.o: fb-level.c fb-level.h fb-level-private.h - g-volume.o: g-volume.c g-volume.h g-volume-private.h volume-oss.h - volume-alsa.o: volume-alsa.c volume-alsa.h volume-alsa-private.h - volume-oss.o: volume-oss.c volume-oss.h volume-oss-private.h - - info-am: - info: info-am - dvi-am: - dvi: dvi-am check-am: all-am check: check-am ! installcheck-am: ! installcheck: installcheck-am ! install-exec-am: install-binPROGRAMS ! install-exec: install-exec-am ! install-data-am: install-DataDATA install-desktopDATA install-schemaDATA \ ! install-data-local ! install-data: install-data-am - install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am install: install-am ! uninstall-am: uninstall-binPROGRAMS uninstall-DataDATA \ ! uninstall-desktopDATA uninstall-schemaDATA uninstall: uninstall-am - all-am: Makefile $(PROGRAMS) $(DATA) - all-redirect: all-am - install-strip: - $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install - installdirs: - $(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(Datadir) \ - $(DESTDIR)$(desktopdir) $(DESTDIR)$(schemadir) mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: ! -rm -f Makefile $(CONFIG_CLEAN_FILES) ! -rm -f config.cache config.log stamp-h stamp-h[0-9]* maintainer-clean-generic: -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) ! mostlyclean-am: mostlyclean-binPROGRAMS mostlyclean-compile \ ! mostlyclean-tags mostlyclean-generic ! mostlyclean: mostlyclean-am ! clean-am: clean-binPROGRAMS clean-compile clean-tags clean-generic \ ! mostlyclean-am ! clean: clean-am ! distclean-am: distclean-binPROGRAMS distclean-compile distclean-tags \ ! distclean-generic clean-am ! distclean: distclean-am ! maintainer-clean-am: maintainer-clean-binPROGRAMS \ ! maintainer-clean-compile maintainer-clean-tags \ ! maintainer-clean-generic distclean-am ! @echo "This command is intended for maintainers to use;" ! @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-am ! .PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \ ! maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \ ! mostlyclean-compile distclean-compile clean-compile \ ! maintainer-clean-compile uninstall-DataDATA install-DataDATA \ ! uninstall-desktopDATA install-desktopDATA uninstall-schemaDATA \ ! install-schemaDATA tags mostlyclean-tags distclean-tags clean-tags \ ! maintainer-clean-tags distdir info-am info dvi-am dvi check check-am \ ! installcheck-am installcheck install-exec-am install-exec \ ! install-data-local install-data-am install-data install-am install \ ! uninstall-am uninstall all-redirect all-am all installdirs \ ! mostlyclean-generic distclean-generic clean-generic \ ! maintainer-clean-generic clean mostlyclean distclean maintainer-clean %.c %.h %-private.h: %.gob --- 217,541 ---- desktop_in_files = acme.desktop.in desktopdir = $(datadir)/control-center-2.0/capplets desktop_DATA = $(desktop_in_files:.desktop.in=.desktop) + subdir = src mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs ! CONFIG_HEADER = $(top_builddir)/config.h ! CONFIG_CLEAN_FILES = ! bin_PROGRAMS = acme$(EXEEXT) acme-properties$(EXEEXT) ! PROGRAMS = $(bin_PROGRAMS) ! ! @HAVE_ALSA_FALSE@@HAVE_FB_FALSE@@HAVE_OSS_TRUE@am_acme_OBJECTS = \ ! @HAVE_ALSA_FALSE@@HAVE_FB_FALSE@@HAVE_OSS_TRUE@ volume-oss.$(OBJEXT) \ ! @HAVE_ALSA_FALSE@@HAVE_FB_FALSE@@HAVE_OSS_TRUE@ g-volume.$(OBJEXT) \ ! @HAVE_ALSA_FALSE@@HAVE_FB_FALSE@@HAVE_OSS_TRUE@ eggtrayicon.$(OBJEXT) \ ! @HAVE_ALSA_FALSE@@HAVE_FB_FALSE@@HAVE_OSS_TRUE@ acme.$(OBJEXT) ! @HAVE_ALSA_FALSE@@HAVE_FB_FALSE@@HAVE_OSS_FALSE@am_acme_OBJECTS = \ ! @HAVE_ALSA_FALSE@@HAVE_FB_FALSE@@HAVE_OSS_FALSE@ g-volume.$(OBJEXT) \ ! @HAVE_ALSA_FALSE@@HAVE_FB_FALSE@@HAVE_OSS_FALSE@ eggtrayicon.$(OBJEXT) \ ! @HAVE_ALSA_FALSE@@HAVE_FB_FALSE@@HAVE_OSS_FALSE@ acme.$(OBJEXT) ! @HAVE_ALSA_FALSE@@HAVE_FB_TRUE@@HAVE_OSS_TRUE@am_acme_OBJECTS = \ ! @HAVE_ALSA_FALSE@@HAVE_FB_TRUE@@HAVE_OSS_TRUE@ volume-oss.$(OBJEXT) \ ! @HAVE_ALSA_FALSE@@HAVE_FB_TRUE@@HAVE_OSS_TRUE@ fb-level.$(OBJEXT) \ ! @HAVE_ALSA_FALSE@@HAVE_FB_TRUE@@HAVE_OSS_TRUE@ g-volume.$(OBJEXT) \ ! @HAVE_ALSA_FALSE@@HAVE_FB_TRUE@@HAVE_OSS_TRUE@ eggtrayicon.$(OBJEXT) \ ! @HAVE_ALSA_FALSE@@HAVE_FB_TRUE@@HAVE_OSS_TRUE@ acme.$(OBJEXT) ! @HAVE_ALSA_FALSE@@HAVE_FB_TRUE@@HAVE_OSS_FALSE@am_acme_OBJECTS = \ ! @HAVE_ALSA_FALSE@@HAVE_FB_TRUE@@HAVE_OSS_FALSE@ fb-level.$(OBJEXT) \ ! @HAVE_ALSA_FALSE@@HAVE_FB_TRUE@@HAVE_OSS_FALSE@ g-volume.$(OBJEXT) \ ! @HAVE_ALSA_FALSE@@HAVE_FB_TRUE@@HAVE_OSS_FALSE@ eggtrayicon.$(OBJEXT) \ ! @HAVE_ALSA_FALSE@@HAVE_FB_TRUE@@HAVE_OSS_FALSE@ acme.$(OBJEXT) ! @HAVE_ALSA_TRUE@@HAVE_FB_FALSE@@HAVE_OSS_TRUE@am_acme_OBJECTS = \ ! @HAVE_ALSA_TRUE@@HAVE_FB_FALSE@@HAVE_OSS_TRUE@ volume-alsa.$(OBJEXT) \ ! @HAVE_ALSA_TRUE@@HAVE_FB_FALSE@@HAVE_OSS_TRUE@ volume-oss.$(OBJEXT) \ ! @HAVE_ALSA_TRUE@@HAVE_FB_FALSE@@HAVE_OSS_TRUE@ g-volume.$(OBJEXT) \ ! @HAVE_ALSA_TRUE@@HAVE_FB_FALSE@@HAVE_OSS_TRUE@ eggtrayicon.$(OBJEXT) \ ! @HAVE_ALSA_TRUE@@HAVE_FB_FALSE@@HAVE_OSS_TRUE@ acme.$(OBJEXT) ! @HAVE_ALSA_TRUE@@HAVE_FB_FALSE@@HAVE_OSS_FALSE@am_acme_OBJECTS = \ ! @HAVE_ALSA_TRUE@@HAVE_FB_FALSE@@HAVE_OSS_FALSE@ volume-alsa.$(OBJEXT) \ ! @HAVE_ALSA_TRUE@@HAVE_FB_FALSE@@HAVE_OSS_FALSE@ g-volume.$(OBJEXT) \ ! @HAVE_ALSA_TRUE@@HAVE_FB_FALSE@@HAVE_OSS_FALSE@ eggtrayicon.$(OBJEXT) \ ! @HAVE_ALSA_TRUE@@HAVE_FB_FALSE@@HAVE_OSS_FALSE@ acme.$(OBJEXT) ! @HAVE_ALSA_TRUE@@HAVE_FB_TRUE@@HAVE_OSS_TRUE@am_acme_OBJECTS = \ ! @HAVE_ALSA_TRUE@@HAVE_FB_TRUE@@HAVE_OSS_TRUE@ volume-alsa.$(OBJEXT) \ ! @HAVE_ALSA_TRUE@@HAVE_FB_TRUE@@HAVE_OSS_TRUE@ volume-oss.$(OBJEXT) \ ! @HAVE_ALSA_TRUE@@HAVE_FB_TRUE@@HAVE_OSS_TRUE@ fb-level.$(OBJEXT) \ ! @HAVE_ALSA_TRUE@@HAVE_FB_TRUE@@HAVE_OSS_TRUE@ g-volume.$(OBJEXT) \ ! @HAVE_ALSA_TRUE@@HAVE_FB_TRUE@@HAVE_OSS_TRUE@ eggtrayicon.$(OBJEXT) \ ! @HAVE_ALSA_TRUE@@HAVE_FB_TRUE@@HAVE_OSS_TRUE@ acme.$(OBJEXT) ! @HAVE_ALSA_TRUE@@HAVE_FB_TRUE@@HAVE_OSS_FALSE@am_acme_OBJECTS = \ ! @HAVE_ALSA_TRUE@@HAVE_FB_TRUE@@HAVE_OSS_FALSE@ volume-alsa.$(OBJEXT) \ ! @HAVE_ALSA_TRUE@@HAVE_FB_TRUE@@HAVE_OSS_FALSE@ fb-level.$(OBJEXT) \ ! @HAVE_ALSA_TRUE@@HAVE_FB_TRUE@@HAVE_OSS_FALSE@ g-volume.$(OBJEXT) \ ! @HAVE_ALSA_TRUE@@HAVE_FB_TRUE@@HAVE_OSS_FALSE@ eggtrayicon.$(OBJEXT) \ ! @HAVE_ALSA_TRUE@@HAVE_FB_TRUE@@HAVE_OSS_FALSE@ acme.$(OBJEXT) ! acme_OBJECTS = $(am_acme_OBJECTS) ! acme_LDADD = $(LDADD) ! acme_DEPENDENCIES = ! am_acme_properties_OBJECTS = acme-properties.$(OBJEXT) \ ! eggcellrendererkeys.$(OBJEXT) eggaccelerators.$(OBJEXT) ! acme_properties_OBJECTS = $(am_acme_properties_OBJECTS) ! acme_properties_LDADD = $(LDADD) ! acme_properties_DEPENDENCIES = ! DEFS = @DEFS@ ! DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) CPPFLAGS = @CPPFLAGS@ LDFLAGS = @LDFLAGS@ LIBS = @LIBS@ ! depcomp = ! COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ ! $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) ! LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ ! CFLAGS = @CFLAGS@ ! DIST_SOURCES = $(acme_SOURCES) $(acme_properties_SOURCES) ! DATA = $(Data_DATA) $(desktop_DATA) $(schema_DATA) ! DIST_COMMON = Makefile.am Makefile.in SOURCES = $(acme_SOURCES) $(acme_properties_SOURCES) + all: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) all-am ! .SUFFIXES: ! .SUFFIXES: .c .o .obj ! $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) ! cd $(top_srcdir) && \ ! $(AUTOMAKE) --gnu --ignore-deps src/Makefile ! Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status ! cd $(top_builddir) && \ ! CONFIG_HEADERS= CONFIG_LINKS= \ ! CONFIG_FILES=$(subdir)/$@ $(SHELL) ./config.status install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(bindir) @list='$(bin_PROGRAMS)'; for p in $$list; do \ ! p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ ! if test -f $$p \ ! ; then \ ! f=`echo $$p1|sed '$(transform);s/$$/$(EXEEXT)/'`; \ ! echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$f"; \ ! $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$f; \ else :; fi; \ done uninstall-binPROGRAMS: @$(NORMAL_UNINSTALL) ! @list='$(bin_PROGRAMS)'; for p in $$list; do \ ! f=`echo $$p|sed 's/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ ! echo " rm -f $(DESTDIR)$(bindir)/$$f"; \ ! rm -f $(DESTDIR)$(bindir)/$$f; \ done ! clean-binPROGRAMS: ! -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) ! acme$(EXEEXT): $(acme_OBJECTS) $(acme_DEPENDENCIES) ! @rm -f acme$(EXEEXT) ! $(LINK) $(acme_LDFLAGS) $(acme_OBJECTS) $(acme_LDADD) $(LIBS) ! acme-properties$(EXEEXT): $(acme_properties_OBJECTS) $(acme_properties_DEPENDENCIES) ! @rm -f acme-properties$(EXEEXT) ! $(LINK) $(acme_properties_LDFLAGS) $(acme_properties_OBJECTS) $(acme_properties_LDADD) $(LIBS) mostlyclean-compile: ! -rm -f *.$(OBJEXT) core *.core distclean-compile: -rm -f *.tab.c ! .c.o: ! $(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$< + .c.obj: + $(COMPILE) -c `cygpath -w $<` + uninstall-info-am: install-DataDATA: $(Data_DATA) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(Datadir) @list='$(Data_DATA)'; for p in $$list; do \ ! if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ ! f="`echo $$p | sed -e 's|^.*/||'`"; \ ! echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(Datadir)/$$f"; \ ! $(INSTALL_DATA) $$d$$p $(DESTDIR)$(Datadir)/$$f; \ done uninstall-DataDATA: @$(NORMAL_UNINSTALL) ! @list='$(Data_DATA)'; for p in $$list; do \ ! f="`echo $$p | sed -e 's|^.*/||'`"; \ ! echo " rm -f $(DESTDIR)$(Datadir)/$$f"; \ ! rm -f $(DESTDIR)$(Datadir)/$$f; \ done install-desktopDATA: $(desktop_DATA) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(desktopdir) @list='$(desktop_DATA)'; for p in $$list; do \ ! if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ ! f="`echo $$p | sed -e 's|^.*/||'`"; \ ! echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(desktopdir)/$$f"; \ ! $(INSTALL_DATA) $$d$$p $(DESTDIR)$(desktopdir)/$$f; \ done uninstall-desktopDATA: @$(NORMAL_UNINSTALL) ! @list='$(desktop_DATA)'; for p in $$list; do \ ! f="`echo $$p | sed -e 's|^.*/||'`"; \ ! echo " rm -f $(DESTDIR)$(desktopdir)/$$f"; \ ! rm -f $(DESTDIR)$(desktopdir)/$$f; \ done install-schemaDATA: $(schema_DATA) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(schemadir) @list='$(schema_DATA)'; for p in $$list; do \ ! if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ ! f="`echo $$p | sed -e 's|^.*/||'`"; \ ! echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(schemadir)/$$f"; \ ! $(INSTALL_DATA) $$d$$p $(DESTDIR)$(schemadir)/$$f; \ done uninstall-schemaDATA: @$(NORMAL_UNINSTALL) ! @list='$(schema_DATA)'; for p in $$list; do \ ! f="`echo $$p | sed -e 's|^.*/||'`"; \ ! echo " rm -f $(DESTDIR)$(schemadir)/$$f"; \ ! rm -f $(DESTDIR)$(schemadir)/$$f; \ done tags: TAGS ! ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) ! list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \ ! unique=`for i in $$list; do \ ! if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ! done | \ ! $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ ! mkid -fID $$unique $(LISP) ! TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ ! $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ ! list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \ ! unique=`for i in $$list; do \ ! if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ! done | \ ! $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ ! || etags $(ETAGS_ARGS) $$tags $$unique $(LISP) ! GTAGS: ! here=`CDPATH=: && cd $(top_builddir) && pwd` \ ! && cd $(top_srcdir) \ ! && gtags -i $(GTAGS_ARGS) $$here distclean-tags: ! -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH ! DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ! top_distdir = .. ! distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) distdir: $(DISTFILES) @for file in $(DISTFILES); do \ ! if test -f $$file; then d=.; else d=$(srcdir); fi; \ ! dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ! if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ! $(mkinstalldirs) "$(distdir)/$$dir"; \ ! fi; \ if test -d $$d/$$file; then \ ! cp -pR $$d/$$file $(distdir) \ ! || exit 1; \ else \ test -f $(distdir)/$$file \ ! || cp -p $$d/$$file $(distdir)/$$file \ ! || exit 1; \ fi; \ done check-am: all-am check: check-am ! all-am: Makefile $(PROGRAMS) $(DATA) ! installdirs: ! $(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(Datadir) $(DESTDIR)$(desktopdir) $(DESTDIR)$(schemadir) install: install-am ! install-exec: install-exec-am ! install-data: install-data-am uninstall: uninstall-am + install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + installcheck: installcheck-am + install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: ! -rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]* maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) ! clean: clean-am ! clean-am: clean-binPROGRAMS clean-generic mostlyclean-am ! distclean: distclean-am ! distclean-am: clean-am distclean-compile distclean-generic \ ! distclean-tags ! dvi: dvi-am ! dvi-am: ! info: info-am ! ! info-am: ! ! install-data-am: install-DataDATA install-data-local install-desktopDATA \ ! install-schemaDATA ! ! install-exec-am: install-binPROGRAMS ! ! install-info: install-info-am ! ! install-man: ! ! installcheck-am: maintainer-clean: maintainer-clean-am ! maintainer-clean-am: distclean-am maintainer-clean-generic ! ! mostlyclean: mostlyclean-am ! ! mostlyclean-am: mostlyclean-compile mostlyclean-generic ! ! uninstall-am: uninstall-DataDATA uninstall-binPROGRAMS \ ! uninstall-desktopDATA uninstall-info-am uninstall-schemaDATA ! ! .PHONY: GTAGS all all-am check check-am clean clean-binPROGRAMS \ ! clean-generic distclean distclean-compile distclean-generic \ ! distclean-tags distdir dvi dvi-am info info-am install \ ! install-DataDATA install-am install-binPROGRAMS install-data \ ! install-data-am install-data-local install-desktopDATA \ ! install-exec install-exec-am install-info install-info-am \ ! install-man install-schemaDATA install-strip installcheck \ ! installcheck-am installdirs maintainer-clean \ ! maintainer-clean-generic mostlyclean mostlyclean-compile \ ! mostlyclean-generic tags uninstall uninstall-DataDATA \ ! uninstall-am uninstall-binPROGRAMS uninstall-desktopDATA \ ! uninstall-info-am uninstall-schemaDATA %.c %.h %-private.h: %.gob *************** *** 489,495 **** install-data-local: -GCONF_CONFIG_SOURCE=$(GCONF_SCHEMA_CONFIG_SOURCE) $(GCONFTOOL) --makefile-install-rule $(srcdir)/$(schema_DATA) - # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: --- 555,560 ---- diff -crN ./acme/stamp-h.in /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./acme/stamp-h.in *** ./acme/stamp-h.in Sat Feb 1 19:15:05 2003 --- /gestconf/project/GNOME_ACL/GNOME/build/sh_build_GNOME/src/./acme/stamp-h.in Sun Aug 10 00:04:04 2003 *************** *** 1 **** - timestamp --- 0 ----